Black screen and power light flashing when laptop is turned on

How to solve the problem when the laptop turns on and the screen is black but the power light is on

The laptop turns on and the screen is black but the power light is on. First, connect an external monitor to see if it can be displayed. If it does not display, it may be due to the graphics card or motherboard. If there is a problem with the hardware, it is best to go to the after-sales service of the notebook manufacturer to check the quality of the hardware.

Solution: Generally, this situation cannot be solved by individuals. It is recommended that you send it to an after-sales maintenance service store for replacement parts as soon as possible. There is an abnormality in the startup power circuit of the laptop motherboard, such as clock, calibration, and power distribution. Or the MOS tube and other abnormal IO problems may cause a black screen.

It may be caused by poor contact between the gold fingers of the memory stick. You can wipe the gold fingers or clean the dust inside the computer.

Try to use a video cable to connect to the video output port of the notebook to check whether the video can be output. If it can be explained that it is a fault in the display screen or cable arrangement, it can only be solved by dismantling the machine for repair or replacing parts.

My computer has a black screen and the power button keeps flashing. What's going on?

It's mainly due to the CMOS setting error. Set the first initialized graphics card to PCI or the onboard AGP graphics card. However, the monitor was not connected in the corresponding position. As a result, the computer started normally, but the monitor did not light up.

Analysis: If the host indicator light is on or off, the screen is not powered on (the power indicator light is not on) or it is powered on but has no signal or displays "no sighal", the former indicates that the power supply is blocked or the connection is in poor contact. The latter is usually caused by poor contact of the memory module or damage to the graphics card.

The monitor power supply is poorly connected, resulting in a black screen and the inability to display the image. First of all, it is normal for the computer host's power button to flash. At this time, if the computer monitor does not display the picture, do not directly judge that it is a problem with the computer host. Sometimes the monitor's power supply connection is not good, and a black screen will appear, causing the illusion that the computer cannot be started.

, use shortcut keys to increase the screen brightness, turn on and off to switch the display, to avoid the screen brightness being too low or the computer going black due to the screen being turned off.

The system is damaged, reinstall the system. There is a problem with the hard disk power supply cable or data cable. Re-plug and unplug it. The partition table of the hard disk is damaged and needs to be repartitioned. The system did not adjust the hard disk to the first startup item. After entering blos, adjust the hard disk and try again. There is a problem with the hard drive. Check and replace it.

The laptop turns on with a black screen, but the power light is on.

1. It may be caused by poor contact between the gold fingers of the memory module. You can wipe the gold fingers or clean the dust inside the computer.

2. What should I do if the screen goes black when the notebook is turned on, but the power-on light is on? The reasons and solutions are: poor slot contact, circuit failure, broken screen cable or poor contact. Poor contact in the slot. Due to poor contact in the memory slot, the screen suddenly goes black and the computer cannot be turned on.

3. The solutions are as follows: Method 1: Due to poor contact in the memory slot, the screen suddenly goes black and the computer cannot be turned on. First unplug the laptop from the power supply. If it has a removable battery design, you can remove the battery first. Open the back cover of the notebook and take out the memory card slot; align it with the gold finger of the memory.

4. The screen is black when the notebook is turned on but the power light is on. First, connect an external monitor to see if it can display. If it does not display, there may be a hardware problem such as the graphics card or motherboard. It is best to go to the notebook manufacturer to check the quality of the hardware.

What to do if the computer monitor has a black screen and the power light is flashing

Solutions to the computer monitor with a black screen and the power light is flashing: When this happens, generally speaking, there are the following reasons, and the solution is as follows: Host power supply Failures caused by black screen failures caused by damage to the host power supply or poor host power supply quality are very common.

Check whether the monitor is powered on, whether the monitor's power switch is turned on, and whether the monitor's power indicator light is on. Check whether the display card is in good contact with the monitor signal line. You can unplug the plug and check whether there are bends, broken pins, or a lot of dirt in the D-shaped socket. This is a problem that many users often encounter.

Suggestion: If the monitor is powered on but shows no signal, turn off the power and open the case, re-insert and unplug the memory module, and use an eraser (you can also scrape the back of your thumbnail) to wipe the gold finger in one direction and install it. Then turn it on again.

Why the computer monitor has a black screen and the power light keeps flashing

1. Failure caused by the host power supply. Black screen failures caused by damage to the host power supply or poor quality of the host power supply are very common.

2. It may be a problem with the memory module. Unplug the power first. After a few seconds, unplug the memory module, wipe the "golden finger" of the memory module with rubber glue, and try it several times to recover.

3. Reasons for computer black screen and solution 1: The black screen is caused by the monitor not working properly due to the monitor itself. For example, there is a problem with the power cord of the monitor and the power plug has poor contact (note: it is possible at both ends. ), the power switch is broken, the internal circuit of the monitor is faulty, etc.

4. The computer monitor has a black screen and the power light keeps flashing, which may be caused by a hardware failure of the monitor or host. If the host is running normally, but the red light in the lower right corner of the monitor keeps flashing, then this may be a problem with the monitor.

5.1: Черный экран вызван неправильной работой монитора из-за самого монитора.Например, возникла проблема со шнуром питания монитора, вилка плохо контактирует (примечание: оба конца возможно), выключатель питания неисправен, внутренняя цепь монитора неисправна и т. д.

6.Плохо подключен блок питания монитора, в результате чего появляется черный экран и невозможность отображения изображения. Прежде всего, мигание кнопки питания хоста компьютера — это нормально. В настоящее время, если монитор компьютера не отображает изображение, не стоит сразу судить о том, что это проблема с хостом компьютера. Иногда подключение к источнику питания монитора плохое, и появляется черный экран, создавая иллюзию невозможности запуска компьютера.

The above is the detailed content of Black screen and power light flashing when laptop is turned on. For more information, please follow other related articles on the PHP Chinese website!