How to configure gateway in centos

To configure CentOS as a gateway, you need to perform the following steps: 1. Configure the network interface and add the GATEWAY value; 2. Set the default gateway and specify DNS information; 3. Start the network service; 4. Test the gateway connection; 5. Configure the firewall (optional) to allow traffic through the gateway.

How to configure a gateway in CentOS

To configure a CentOS system as a gateway, you need to perform the following steps:

1. Configure the network interface

• Edit the network configuration file/etc/sysconfig/network-scripts/ifcfg-**interface_name**.
• Add the following lines to the file:

<code>GATEWAY=**gateway_address**</code>

• where gateway_address is the IP address of the gateway.

2. Set the default gateway

• Edit the file /etc/resolv.conf.
• Add the following lines:

<code>search **domain**
nameserver **dns_address**</code>

• where domain is the domain name (optional) and dns_address is the DNS server's IP address.
• Save and close the file.

3. Start the network service

• Run the following command:

<code>systemctl restart network</code>

• Or, restart system.

4. Test the gateway

• Try pinging an external IP address, such as 8.8.8.8.
• If you can ping, the gateway has been configured successfully.

5. Configure the firewall (optional)

• If the firewall is enabled, you need to allow network traffic to pass through the gateway.
• Run the following command:

<code>firewall-cmd --add-masquerade --permanent
firewall-cmd --reload</code>

Your CentOS system should now be configured as a gateway that can route network traffic to other devices.

The above is the detailed content of How to configure gateway in centos. For more information, please follow other related articles on the PHP Chinese website!