What should I do if my Apple phone has a black screen and cannot be turned on? Multiple solutions to solve easily!

php Editor Baicao Recently, many Apple phone users have reported that black screens often occur after holding their Apple phones, but this operation does not turn on the low power mode. This problem confuses many users. However, according to experience, the solution to this problem is not difficult and can be easily solved by using some simple solutions. In this article, we will provide a variety of solutions to easily solve the black screen problem on Apple phones.

The Apple phone has a black screen and cannot be turned on and is unresponsive. Many times, this is just caused by temporary problems such as software failures, system conflicts, or battery exhaustion. Below I will share with you some solutions!

Method 1: Charging Check

First, make sure your iPhone has enough power. Connect the original charger, charge the phone for 15 minutes, and then try to turn it on. Sometimes, the phone cannot be turned on because the battery is too low. If the above doesn't work, you can try other solutions. First, please make sure the charging cable and charger are working properly. You can try using other chargers or charging cables for charging. If it still cannot be charged, the charging interface of the phone may be damaged. It is recommended to contact a professional.

Method 2: Force restart the phone

What should I do if the Apple phone has a black screen and cannot be turned on after charging? We can try to force restart the Apple phone.

Different iPhone models choose different forced restart operations:

1. Full-screen models (iPhone8 and later): Quickly press the volume up and down keys respectively, and then continue to press the power key. Until the Apple logo appears on the iPhone with a black screen, release the buttons;

2, iPhone7, iPhone7Plus, etc.: Press and hold the top (or side) button and the volume down button at the same time until the iPhone with a black screen appears Apple logo, release the button;

3. Models with Home button (before iPhone7): Press and hold the Home button and the power button at the same time until the Apple logo appears on the iPhone under the black screen, release the button. Can.

Method 3: Update the mobile application

How to restore the screen to normal if the screen of Apple phone is black? If the problem is caused by an app, you can try updating the app to the latest version, or uninstall and reinstall it.

Method 4: iOS system repair

When the iPhone has a black screen due to upgrades, frequent installation of third-party software, etc., or other system problems, or insufficient memory, you can use iOS system repair tools. to repair.

For example, Apple's mobile phone repair tool uses the tool's "standard repair" mode to repair the iPhone without losing device data. It repairs more common iOS system problems that cannot be solved by force restarting.

Operation Guide:

Step 1: Install the startup tool and connect the device to the computer through the data cable. If the software cannot be recognized normally, click "Start" directly. It is recommended to give priority to the "Standard Repair" mode, which can preserve data during repair.

Step 2: Click "Start Repair", then click "Download Firmware". After the download is successful, the repair will begin.

What is being done here is "standard repair". The whole process takes about 10 minutes. Be careful not to disconnect the data cable and wait for "Repair Completed" to be displayed.

Step 3: The system is repaired successfully. A "standard repair" performed by default without losing device data.

If none of the above methods can solve the black screen problem on your iPhone, then there is a high probability that there is a hardware problem. It is recommended to send it to Apple for official professional repair services.

The above is the detailed content of What should I do if my Apple phone has a black screen and cannot be turned on? Multiple solutions to solve easily!. For more information, please follow other related articles on the PHP Chinese website!