Gigabyte motherboard enters safe mode

How to enable secure boot on Gigabyte motherboard

To enable secure boot on Gigabyte X299 motherboard, you need to enter the BIOS settings, enter the "Security" option, and select "Secure Boot" Set to "enabled". Then in the "Boot" options, disable "Fast Boot" and "CSM Support" and select "UEFI" or "Secure Boot Mode".

Press the F8 key when the new version of the Gigabyte motherboard is turned on, move the cursor to safe mode, and press the Enter key to enter safe mode.

After entering the BIOS, first change the setting interface to "Advanced Mode" and press the F2 key to switch.

GIGABYTE motherboard, disk.sys suddenly goes black when entering Windows and safe mode, please help

The memory module is not inserted properly. Reconnect and unplug a few times, and wipe the memory module pins with an eraser if necessary. The windows system is broken. Requires reinstallation. The monitor is broken. The graphics card is broken. The motherboard is burned. . A black screen can occur for many reasons.

The computer is infected or some programs are damaged. There is a problem with certain hardware of the computer and the driver cannot be loaded normally. Solution: Adjust the display resolution back to the normal range and the refresh rate back to a lower frequency. Antivirus in safe mode. Uninstall the graphics card driver in safe mode and reinstall the graphics card driver.

The specific operations are as follows: Operation steps: Use the DikPart tool to repartition.

First check whether it is caused by the monitor's refresh frequency being set too high. After entering safe mode, right-click on the desktop and select "Properties", select the "Settings" tab in the window that opens, and click " Click the "Advanced" button, select the "Monitor" tab, and set the "Screen Refresh Rate" to a lower value.

First we open the run window, as shown in the figure below. Next, you need to enter the instructions in the picture, as shown in the figure below. Then switch to the Bootstrap tab as shown in the image below. Next, you need to check Safe Boot, as shown in the figure below. Then select Minimal Boot, confirm to save, and restart the computer.

If the boot mode is UEFI, the boot file may be damaged and the esp partition needs to be repaired.

How to enter safe mode on the new version of Gigabyte motherboard

1. Press F8 to enter safe mode on Gigabyte motherboard. It is the same regardless of the motherboard, because safe mode is part of the operating system, not a component of the software. As long as the user uses the Windows operating system, it is usually F8.

2. After booting, press the "Delete" key to enter the BIOS setting interface. Enter "AdvancedMode (Advanced Mode)". Find the "Boot" tab and enter it. Find the "SecureBoot (Safe Mode)" option and set it to "Enabled (Enabled)".

3. Safe mode is a function of the operating system and has nothing to do with the motherboard. Windows 7 and previous operating systems enter safe mode in the same way. To enter safe mode in Windows 10, you need to select Advanced in the recovery mode of the operating system. Recovery Settings - Troubleshooting - Advanced, select Enter.

4. To enable secure boot on the Gigabyte X299 motherboard, you need to enter the BIOS settings, enter the "Security" option, and set "Secure Boot" to "Enable". Then in the "Boot" options, disable "Fast Boot" and "CSM Support" and select "UEFI" or "Secure Boot Mode".

The above is the detailed content of Gigabyte motherboard enters safe mode. For more information, please follow other related articles on the PHP Chinese website!