How to install memory sticks in laptops

How to insert a memory stick into a laptop

First of all, before adding a memory stick to the laptop, you need to remove the battery, turn on the battery lock switch on the right side on the back, and turn on the battery lock switch on the left Push the battery lock to the left (hold it still), and then remove the battery.

First, you need to remove the laptop battery to prevent the memory slot from burning when inserting the memory stick; then, open the buckle next to the memory stick to make the first memory stick "stand up"; finally, insert the new memory stick Memory stick, please note that the notch on the memory stick should correspond to the bulge on the memory slot.

The method of adding a memory module to a laptop is as follows: First open the computer casing and disassemble the computer. When installing memory, first open the buckles at both ends of the memory slot with your hands.

How to install a laptop memory module

1. The method of adding a memory module to a laptop is as follows: First open the computer casing and disassemble the computer. When installing memory, first open the buckles at both ends of the memory slot with your hands.

2. First, you need to remove the laptop battery to prevent the memory slot from burning when inserting the memory stick; then, open the buckle next to the memory stick to make the first memory stick "stand up"; finally, insert the new memory stick. When adding a memory module, note that the notch on the memory module should correspond to the bulge on the memory slot.

3. How to install a laptop memory module and turn off the power: First, turn off the power of the laptop to avoid accidents when installing the memory module. Open the case: Open the laptop case and find the slot for the memory module, usually at the bottom of the laptop.

How to add a memory stick to a laptop

1. To expand the running memory of a laptop, there are usually the following methods: Upgrade the memory: If the memory of the laptop can be replaced, you can Try upgrading the memory. Typically, memory slots can be found on the bottom or side of your laptop, where you can insert a memory stick.

2. The method of adding a memory module to a laptop is as follows: First open the computer casing and disassemble the computer. When installing memory, first open the buckles at both ends of the memory slot with your hands.

3. Taking a Lenovo notebook as an example, the method for installing a memory module in a notebook is as follows: Prepare the memory module, computer and corresponding disassembly tools. Turn off the notebook and remove the battery. Use a needle or other sharp object to take out the round object in the red box, and the screw below will appear.

4. First, shut down the computer, remove the power source of the computer, and remove the battery, as shown in the picture below. Remove all the screws from the laptop and open the cover along the gap, as shown in the picture below. Then you can see the erasing area of ​​the notebook, as shown in the picture below.

5. Use a screwdriver to unscrew the screws on the back of the laptop. There is a T-shaped area in the upper left corner where the memory module is inserted. Determine the front and back of the memory module. There is a small opening (notch) on one side, and align this small opening with the protrusion on the memory module socket.

6. The collective operation is as follows: Press "Win R" on the desktop to open the run window. Enter "dxdiag" and click "OK". You can see the computer memory in the pop-up page. Use relevant software to check the original notebook memory model. Different models of notebook memory cannot be mixed.

The above is the detailed content of How to install memory sticks in laptops. For more information, please follow other related articles on the PHP Chinese website!