


The computer fan suddenly makes a loud sound and then the screen goes black
Why does the screen turn black when the laptop turns on and the fan keeps sounding?
1. The screen turns black but the fan turns on when the computer turns on. This is usually caused by hardware contact such as the monitor cable and memory. If it is caused by defects, you can disassemble the machine, inspect each component, remove dust and reinstall it.
2. Power supply problem: A exhausted battery or failed power adapter may cause the computer to fail to boot. Try replacing the power adapter or rechargeable battery to see if the computer can boot normally. Hardware failure: If there is a problem with the computer hardware device, it may not start properly.
3. The fault may be caused by a problem with the hard disk, or the computer may not have good heat dissipation.
4. The fan keeps beeping after the computer is turned on, but the monitor screen is black and unresponsive. Determine what the problem is based on the buzzer sound when turning on the computer. The long beep is that the graphics card is not connected properly. First check whether your monitor cable is connected properly. If that still doesn't work, unplug the memory stick, wipe it clean, and plug it back in.
5. It may be due to the following situations that the laptop screen suddenly goes black and cannot be turned on but there is still a startup sound: Graphics card problem: There may be a problem with the graphics card driver, or the graphics card itself is faulty, causing the laptop to not work properly. show. Memory problem: There may be a problem with the memory, which prevents the computer from starting normally.
The computer fan suddenly spins wildly and then the screen goes black
It should be caused by hardware damage, such as the graphics card or memory, not excluding the motherboard. It may also be caused by unstable voltage that causes automatic restart and causes system files to be damaged or lost. System problems are not enough to cause blurred screens. The cause of blurred screens is generally related to the graphics card or memory, and the graphics card is very directional.
The computer screen is black and the graphics card fan is spinning wildly. This situation has a lot to do with the unstable power supply of the graphics card or abnormal driver. You can try plugging in and out of the power supply or changing the power output to see if there is an improvement.
When the computer turns on and the screen goes black but the fan spins, it is usually caused by poor connections in hardware such as monitor cables and memory. You can disassemble the computer to check each component, remove dust and reinstall it.
The sudden black screen and loud sound are caused by the memory and graphics card: there is a problem with the graphics card's fan, causing the graphics card to heat up too much and unable to cool down, resulting in a crash and black screen caused by the graphics card.
Loose or damaged memory module: Loose or damaged memory module will cause the computer to fail to start normally, resulting in a black screen. Hardware failure: Other hardware components of the computer such as the motherboard, power supply, etc. may also fail, causing the computer to fail to start normally.
What to do if the computer suddenly goes black and the fan spins violently
(2) Solution: Turn off the power, turn on the host, remove the graphics card, sweep away the dust on the cooling fan, or add a Just add two drops of lubricating oil or replace the fan.
When the computer turns on and the screen goes black but the fan spins, it is usually caused by poor connections in hardware such as monitor cables and memory. You can disassemble the computer to check each component, remove dust and reinstall it.
So while considering redoing the system, if the blurred screen still appears, you should consider replacing or repairing the graphics card.
The computer has a black screen and the graphics card fan is spinning wildly. This situation has a lot to do with the unstable power supply of the graphics card or abnormal driver. You can try plugging and unplugging the power supply or changing the power output to see if there is an improvement. Diagnose the fault first. There are many types of black screens. Generally, friends who don’t know much about computers will only become anxious when they see a black screen.
Solution: Turn off the power, turn on the host, remove the graphics card, sweep away the dust on the cooling fan, or add one or two drops of lubricating oil to the fan, or replace the fan. A black screen is caused by poor contact between the memory and the memory slot.
If the computer suddenly goes black and buzzes, you can try the following solutions: Check the power connection: Make sure the computer's power cord is firmly connected and the plug is not loose or has poor contact.
The above is the detailed content of The computer fan suddenly makes a loud sound and then the screen goes black. For more information, please follow other related articles on the PHP Chinese website!

Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

Notepad++7.3.1
Easy-to-use and free code editor

SublimeText3 Chinese version
Chinese version, very easy to use

Zend Studio 13.0.1
Powerful PHP integrated development environment

Dreamweaver CS6
Visual web development tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

Hot Topics



First, download and install the [DiskGenius] tool on your computer, then open the tool, then click [File Menu] at the top, and then click [Restart the system and run the DiskGenius software], as shown in the figure. Then click [OK] in the pop-up prompt box, as shown in the figure. After that, the computer will restart and then enter the Diskgen hard disk partition interface. At this time, if we want to expand the C drive, we only need to right-click the D drive next to the logical partition and click "Adjust Partition Size" in the pop-up menu, as shown in the figure shown. Then you need to adjust the size of the D drive partition. For example, the current capacity of the D drive is 14.99GB, as shown in the figure below. At this time, we can adjust the installment of the D drive. For example, if we want to allocate 1.03GB to the C drive, we only need to allocate 1.03GB to the C drive.

Tutorial on assembling a computer and installing a system? Nowadays, the system installation for assembling computers is very simple and convenient, and only requires a CD. First enter the bios settings, set the computer to boot first with the CD-ROM drive, then restart the computer and load the system CD into the CD-ROM drive. The CD will automatically enter the installation state. At this time, you only need to manually repartition the partitions, and the rest will be completed automatically. How to install win11 system when assembling a computer? 1. First, we need to download a win11 image file from this site before installing it. 2. The win11 image file has undergone a large number of professional tests to ensure stable installation and smooth operation. 3. After the download is completed, load the folder in the download path and run the "windowssetup" process in it.

The 24h2 version is the latest operating system released by Microsoft. I believe many users have seen some download packages on the Internet. So how can win1124h2 skip the Internet installation system? Let this site carefully introduce the latest version of win1124h2 to users. Skip the Internet installation tutorial. The latest version of win1124h2 skips the online installation tutorial. Method 1: Skip by modifying the registry. 1. Press the Shift+F10 keys to bring up the cmd command prompt window and enter the following command: regedit and press Enter to quickly open the registry editor. If users feel that the 24h2 version is not used to the operation, they can click on the 23h2 version below to reinstall it. Win1123H22263

Why does the laptop have a black screen when it starts up and the fan keeps beeping? 1. When the computer starts up and the screen goes black but the fan spins, it is usually caused by poor contact between the monitor cable and memory and other hardware. You can disassemble the computer to check each component, remove dust and reinstall it. 2. Power supply problem: The battery is exhausted or the power adapter fails, which may cause the computer to fail to boot. Try replacing the power adapter or rechargeable battery to see if the computer can boot normally. Hardware failure: If there is a problem with the computer hardware device, it may not start properly. 3. The fault may be caused by a problem with the hard disk, or the computer may not have good heat dissipation. 4. The fan keeps beeping after the computer is turned on, but the monitor screen is black and unresponsive. Determine what the problem is based on the sound of the buzzer when the computer is turned on. The long beep is that the graphics card is not connected properly. first check

What should I do if I forget my Apple ID password? With the development of the information age, people have registered many personal accounts online, and the number of passwords corresponding to each account has also increased, which is very easy to confuse. Recently, a friend forgot his Apple ID password and doesn't know how to retrieve it. Below, Zhao Wenting will teach you how to retrieve your Apple ID password. Tools/Materials System version: iOS15.6 Brand model: iphone11 Method/step: Method one: Reset ID password 1. If your iPhone can be used normally, but you just forgot the password for logged in appleid, you only need to log in to appleid Click [Log Out] at the login page, then click [Forgot Password], enter the iPhone lock screen password to reset the iPhone

Yes, just follow these steps: Download and install the Chinese version of Navicat. Run Navicat and select Tools > Preferences. In the Preferences dialog box, select the Appearance tab. In the Language drop-down list, select Simplified Chinese or Traditional Chinese. Click OK to save settings and restart Navicat.

What is the appropriate temperature for playing Apex computer? 80 degrees is suitable. When running large-scale games or playing high-definition videos, the temperature can reach about 80°C. Generally, it is considered normal to not exceed 90°C under high load. Graphics cards are generally the hardware that generates the most heat among computer hardware. Generally, it is normal for the temperature of a graphics card to be around 30℃-80℃. Due to external temperature, it is normal for most graphics card temperatures to be between 50℃-85℃ in summer. range, if you are running large-scale 3D games or playing high-definition videos for a long time, the highest temperature may reach about 95°C. This temperature range will affect the life of the computer hardware. No matter how high the temperature is, you must consider strengthening heat dissipation and cleaning dust. How to play with the apex handle and the computer ? Method/step-by-step reading: 1. Use wired or wireless

How to set the computer to automatically restart 1. Find the computer on your computer desktop and right-click the mouse. In the pop-up window, we find properties and click. After entering the system properties, we select. 2. You can set it in the task scheduler to set up automatic startup: right-click this computer, select Manage, and enter the page. Expand System Tools, click Task Scheduler, and click Create Basic Task on the right. 3. How to set the computer to automatically restart when a call comes in. First, restart your computer and click Restart with the left button of the mouse. Because the XP system was used for testing, the startup time is very short. Press and hold DEL during startup to enter the BIOS interface. The BIOS interface is shown in the figure below. This is the main BIOS interface. How to set the computer to automatically start after a power outage. First, restart
