How to assemble lenovo computer? How to assemble and turn on the computer?

Assembling a computer may seem complicated, but it is actually not difficult. PHP editor Baicao brings you detailed assembly tutorials, from zero basics to skilled assembly, taking you step by step to master computer assembly. Whether you want to assemble a high-performance computer yourself or want to understand the internal structure of a computer, this tutorial can meet your needs. Below, we will introduce in detail every step from preparing materials to completing the assembly, so that everyone can easily assemble the computer of their choice.

How to assemble a lenovo computer?

The specific installation steps are as follows

1. CPU installation

The CPU should be put down smoothly, then cover the iron cover, press the iron rod firmly into place, and the CPU installation is completed.

Then apply CPU cooling silicone evenly on the CPU

2. Install the CPU radiator

First, turn the four foot pins to the opposite direction of the arrow above. Then align the four empty spots on the motherboard and press hard to complete the installation of one position. Repeat four times.

If you want to disassemble the radiator, turn the four pins in the direction of the arrow above, then pull hard, repeat four times to disassemble.

3. The installation of the memory is very easy. Align the memory and the bumps on the memory slot, and press it with left/right force respectively. When you hear a small "pop" sound, the left/right slot will automatically open. , and then press the other side in the same way.

4, Power supply installation

Install the four screws of the power supply

5, Motherboard installation Use a screwdriver to press the screws into the reserved screw holes to fix the motherboard.

6. Hard drive installation

You can choose the bay to install the hard drive. The general principle is to install it in the middle to ensure more heat dissipation. Four screws are installed. If you are lazy, you can also install two diagonally. .

7. Graphics card installation

Nowadays, independent graphics cards are not required to be installed. The CPU or motherboard has integrated graphics cards, so it is no problem to meet the basic requirements. Installing the graphics card is not difficult. Just remove the chassis baffle, insert it into the PCI-E slot, and then tighten the screws. If the motherboard has multiple PCI-E

8, motherboard wiring

1. Motherboard power supply/CPU auxiliary power supply: align the bayonet and connect

2. Front audio and front USB: align Plug in the fool-proof interface

3. The hard disk light, power light, power button, and restart button are installed according to the motherboard markings (color wire positive, black and white wire negative)

HDD LED represents the hard disk light , POWER LED is the power light, RESET SW is the reset button, POWER SW is the switch, and PC SPEAKER is the PC speaker.

4. Hard drives now basically have SATA interfaces. Just connect the SATA power cable (5PIN flat cable) and data cable.

5. Don’t forget to connect mid-to-high-end graphics cards. How to assemble and turn on the computer with 6PIN or 8PIN auxiliary power supply?

When assembling a computer, the first step is to select the motherboard, CPU, and memory. harddisk. graphics card. chassis and power supply.

The second keyboard, mouse, monitor, camera and other peripherals.

The third part is assembled. Insert the cpu, hard drive, and graphics card. Power supply, etc. are connected as required. The keyboard, mouse, and monitor peripherals are connected to the corresponding interfaces.

The fourth step is to choose a windows system or a linux system when making a system disk. The fifth step is to install the system.

The sixth part starts.

How to assemble a philips computer?

Put the three major pieces together normally, stuff them into the main case, hang them on the Philips monitor, light them up, and it should be OK!

How to assemble aco computer?

Step 1 of assembling a computer

The first is the installation of the chassis, which mainly involves unpacking the chassis and installing the power supply in the chassis, then installing the motherboard and installing the motherboard on the chassis motherboard , assemble the computer and then install the CPU, insert the required CPU into the motherboard processor socket, and install the cooling fan, assemble the memory module in the computer, and insert the memory module into the motherboard memory slot.

Assemble the computer step 2

The next step is to install the graphics card, select the appropriate slot according to the graphics card bus; assemble the computer and install the sound card. Most of the mainstream sound cards in the market now are sound cards with PCI slots; The installation of drives mainly focuses on the installation of hard disks, optical drives and floppy drives; then there is the assembly of the connections between the computer chassis and the motherboard, that is, various indicator lights and power switch wires. The connection of PC speakers, as well as the connection of power cables and data cables of hard disk, optical drive and floppy drive.

Step 3 of assembling a computer

The third step of assembling a computer is to close the chassis cover. Theoretically, after installing the host, you can close the chassis cover, but in order to avoid problems later For inspection, it is best not to cover it first, and then cover it after the system is installed. Then there is the installation of input devices. When assembling the computer, you also need to connect the keyboard and mouse to integrate with the host; the installation of output devices, that is, the installation of the monitor; and then Recheck each wiring connection and prepare for testing.

Step 4 of Assembling a Computer

Assemble the computer and power up the machine. If the monitor can display normally, it indicates that the initial installation has been correct. At this time, enter the BIOS for initial system settings. After completing the above steps of assembling the computer, the general hardware installation is basically completed, but to make the computer run, the following installation steps are required.

Step 5 of assembling a computer

The next step is to assemble the computer's partitioned hard drive and format the hard drive, and install the operating system, such as Windows 98 or Windows XP. After assembling the computer and installing the operating system, install drivers such as graphics card, sound card and other drivers; perform a 72-hour bake-in. If there is a hardware problem, it will be discovered during the 72-hour bake-in.

How to assemble a noc computer?

The steps to assemble a computer are as follows: 1. In the first step, open all the accessories and open the chassis.

2. The second step is to install the CPU and CPU fan, and place the memory module in the corresponding card slot.

3. In the third step, first install the motherboard foot nuts, and then place the motherboard into a stable chassis to fix it.

4. The fourth step is to arrange the cables according to the instructions.

5. The fifth step is to connect the power supply and the host assembly is completed.

6. The sixth step is to connect the host and the monitor. First connect the VGA cable to the monitor, and then fix the two screws at the back.

7. Step 7. After the fixation is completed, connect the other end of the VGA cable to the computer host.

8. The eighth step is to connect the power cord to the monitor, and the computer assembly process is basically completed.

How to assemble an ordinary computer?

1. Select components: Choose CPU, motherboard, memory, hard drive, graphics card, power supply and other components that suit your needs. You can refer to online hardware reviews and comparisons.

2. Prepare tools: Screwdrivers, tweezers, gloves and other tools are required to assemble the computer. Prepare them as needed.

3. Install the CPU: Open the motherboard, find the CPU slot, and insert the CPU according to the instructions, paying attention to the same direction as the socket. Press the CPU buckle to secure the CPU to the motherboard.

4. Install memory: Find the memory slot on the motherboard, insert the memory into it first, and then press it with your hands on both sides. When you hear a "click", it means it has been inserted.

5. Install the hard drive: Plug the hard drive into the data cable and power cable, and then insert the hard drive into the SATA slot on the motherboard.

6. Install the graphics card: Insert the graphics card into the PCIE slot on the motherboard and secure it with screws.

7. Connect the power supply: Insert the power supply into the dedicated socket on the motherboard and pay attention to the correct connection.

8. Connect the monitor: Plug the monitor data cable into the output port of the graphics card.

9. Review the past and learn the new: Before inserting components, carefully read the motherboard manual and component manuals, especially the instructions for use of sockets and switches.

10. Start-up test: Plug the power supply into the socket and press the computer power-on button. If the screen appears, the computer is successfully assembled. Otherwise, repeated inspections are required.

How to assemble acer desktop computer?

Steps to reinstall the system on Acer computers:

1. After the computer enters the system, open Xiaobai’s one-click reinstallation and wait for the local detection to be completed. 2. Then select the system version that needs to be reinstalled and click

3. Keep clicking Next for the following steps, and wait patiently for the system installation to restart successfully. 4. Start the installation after the computer restarts, and officially enter the Acer computer system after multiple restarts.

How to assemble Tsinghua Tongfang computer?

The process of assembling a desktop computer is as follows:

(1) The installation of the chassis mainly involves unpacking the chassis and installing the power supply in the chassis.

(2) Installation of the motherboard, install the motherboard on the chassis motherboard.

(3) To install the CPU, insert the required CPU into the motherboard processor socket and install a cooling fan.

(4) To install the memory module, insert the memory module into the motherboard memory slot.

(5) For the installation of the graphics card, select the appropriate slot according to the graphics card bus.

(6) Installation of sound card. Most of the mainstream sound cards on the market now are sound cards with PCI slots.

(7) Driver installation mainly focuses on hard disk, optical drive and floppy drive.

(8) The connection between the chassis and the motherboard, that is, various indicator lights and power switch wires. The connection of PC speakers, as well as the connection of power cables and data cables of hard disk, optical drive and floppy drive.

(9) Close the chassis cover (Theoretically, you can close the chassis cover after installing the host, but in order to check for future problems, it is best not to cover it until the system is installed. cover it later).

(10) Installation of input devices, connecting keyboard and mouse to integrate with the host.

(11) Installation of output devices, that is, installation of monitors.

(12) Recheck each wiring and prepare for testing.

(13) Power on the machine. If the monitor can display normally, it indicates that the initial installation has been correct. At this time, enter the BIOS for initial system settings.

The hardware installation is finished.

The following is the installation of the operating system:

(14) Partition the hard disk and format the hard disk.

(15) Install the operating system, such as win7 or Windows XP system.

(16) After installing the operating system, install drivers, such as graphics card, sound card and other drivers.

How to assemble and plug in the computer?

1.

The front panel connections of the chassis generally include front audio, front USB, power indicator light, hard disk indicator light, power on, and restart.

The wiring diagrams for these connections are generally explained in the motherboard manual.

If not, check that it is written on the motherboard. Pay attention to the position of the pins.

They are basically connected in this way. The HD-LED on the motherboard is the hard disk working indicator light, so just write the thread. There are: H..D.D.LED is plugged in. The SP-LED on the mainboard is the power working indicator light. Just plug in the positive and negative ends of the wire with "P" written on it. If the two indicator lights are plugged in reverse, the positive and negative ends are plugged in. Level, the light will not light up after the power is turned on. If it does not light up, just change the positive and negative directions.

2.

The RST on the motherboard is the reset button. Plug in the one with RESET SW written on the wire. The PW-BN on the motherboard is the power-on button. Plug in the one with POWER SW written on the wire.

3.

SPEAKER is a front buzzer, divided into """-" phases; it can happen no matter how you connect an ordinary speaker, but it is special here. Since the voltage value of 5V is provided on the " " phase, we must install it correctly to ensure that the buzzer sounds.

4.

The following is the front audio. The F-AUDIO on the motherboard is the location of the front audio interface. It is different from the USB. USB has one less pin on the side. There is one less pin on the 4th pin for audio, just plug it into the corresponding position

5.

The front panel connection is complete, and finally connect the power supply and hard disk. The SATA data cable is in the shape of an inverted 7-digit line. Don't worry about plugging it in wrongly. If you plug it in wrongly, it won't go in. The hard drive movie cable is wider than the data cable and has a similar shape. Connect it to the hard drive

6 .

Just align it and insert it. The other end of the SATA data cable is plugged into the SATA interface of the motherboard. That's it, now connect the power supply to the motherboard.

7.

The motherboard is powered by 24P. The old motherboard used to be 20P, so I took it out and there are 4 active ones on the side.

8.

The CPU has 8P power supply, and there are also 4P power supply. Both the motherboard and CPU power supply are designed to be fool-proof. Don’t worry about plugging it in wrongly. If you plug it in the wrong direction, you won’t be able to plug it in.

9.

Connect to the corresponding interface. Look at the motherboard interface diagram above. The graphics card power supply is 6P, and there are also 8P. It can be disassembled, and the graphics card power interface is plugged in. That's it.

10.

The installation is complete. If your case is side-transparent, you can install a strip of polarizing light, which will look much better. If it is not side-transparent, there is no need to install it. You are good to go. For a chassis with back wiring, put the wiring at the back so that it looks beautiful. After installation, untie the wiring and tie up the ones that need to be tied up with zip ties to make it look more comfortable.

How to assemble a Lenovo desktop computer?

Lenovo desktop computer assembly is to add memory modules or solid-state drives to the original standard configuration.

The above is the detailed content of How to assemble lenovo computer? How to assemble and turn on the computer?. For more information, please follow other related articles on the PHP Chinese website!