How to assemble a cost-effective computer? For newbies who want to get their hands dirty and build a computer of their own, this question can be daunting. In this article, PHP editor Zimo will introduce in detail the relevant knowledge of assembling a complete set of computers, including the necessary accessories, assembly steps and how to build the best complete set of assembled computers with a budget of 2,500 yuan, to help you gradually understand the process of assembling a computer. Build a computer that suits your needs.
Complete computer assembly refers to the assembly of computer hardware and the installation of software, mainly for computer DIY. Those who need to do it must have a certain knowledge of computer hardware and understand the current hardware models and prices; the software installation is relatively simple, just follow the prompts.
If you buy a brand-name machine and the hardware and system are installed, this problem will not exist.
Twenty-five hundred yuan to assemble a computer, but the configuration can only be average. The desktop computer is divided into two main parts: the host and the monitor. At this price, the monitor can only be equipped with a general configuration, which costs about more than 200 yuan. The rest is used to assemble the host. The host includes the chassis, power supply, exhaust fan, computer motherboard and memory, and computer Processor, sound card and network card, computer desktop hard drive (this price cannot meet the solid state drive).
The price of independent graphics card is not enough, only integrated graphics card can be used
The first step is to prepare a fishing rod, one main line, one sub-line, one piece of lead sheet, one piece of lead sheet, one piece of lead sheet, one piece of fishhook, one piece of floating base, one piece of scissors, and some space beans.
The second step is to pull out the tip of the pole first, then use a red rope to tie a knot 1.5cm away from the tip of the pole, then cut off the remaining part of the red rope, and bake the knot with fire a few times.
The third step is to take out the lead sheet and lead sheet holder, and then select the amount of lead according to your needs. The general principle is that the greater the drift, the greater the amount of lead.
The fourth step is to connect the pole tip to the main line with a figure-8 buckle. Then make another figure 8 buckle on the line 2cm behind the figure 8 buckle.
The fifth step is to stretch out the Taiwan fishing rod, and then cut off the line 10-15cm beyond the rod tail.
The sixth step is to thread 2 space beans on the fishing line, then insert the floating seat, and then thread 2 space beans.
The seventh step is to roll the tied accessories into a section. After a certain distance, put on a space bean, insert the pre-rolled lead leather base, and then put on a space bean. Space beans.
The eighth step is to tie a knot on the main line and then thread it through the figure 8 loop.
The ninth step is to cut off the excess main line to ensure that the length of the fishing line is consistent with that of the fishing rod.
The tenth step is to tie the hook. Note that the length of the sub-line should be selected according to needs. Generally, the length of the recreational fishing line should be kept between 30-50cm, and the length of the professional competitive fishing line should be kept within 60cm. Finally, tie the second hook into the other end of the sub-line. And connect the hook to the figure 8 ring.
The process for individuals to purchase a team leader's computer in Electronic City is relatively simple:
Under the guidance of on-site sales staff or technicians, select computer accessories according to your own needs and fill in the configuration form
After all accessories are selected, that is, after the configuration form is completed, the sales staff calculates the price based on the configuration form and generates a payment slip
You take the generated payment slip to the cashier to complete the payment. At the same time, the technical staff will Start assembling the computer according to the configuration you selected
After the payment is completed, you need to check the installation status of the technician on the spot, check whether the computer can run stably, the noise level of the host, whether there are dead pixels on the screen, etc. You can check through the computer Use the security software in your computer to check whether the computer's configuration is consistent with your own configuration list.
After completing the above inspection, the sales staff will pack the computer and you can take it home.
Chassis, power supply, memory stick, motherboard, cpu hard drive, solid state drive, graphics card, fan, monitor
Sea rod fishing set consists of three parts: sea rod, reel and line group. The assembly of the sea rod system is the process of installing the reel with fishing line on the sea rod and then connecting the line set. The methods and steps are as follows.
Install the line wheel
Installing the line wheel is the first step in assembling the sea rod. The reel is usually installed on the handle section of the sea pole. The jointed sea rod is also composed of multiple sections. The thickest section at the lower end is called the handle section, and there is a mechanism for installing the wire wheel on it. Different sea rods have different ways of connecting the reels. Most fiberglass sea rods are of the spiral locking type. Just insert the wheel of the line wheel and tighten it. Most carbon fiber sea rods are card-type. Pull out the card, insert the reel, and press the card tightly.
Pay attention to three points when threading. First, it is advisable to adjust the reverse address button to a state where the wire wheel can rotate in both directions so that the wire can come out when threading. The reverse address button is usually located below the topic. Different brands and models of reels have different positions and shapes. Second, when threading, you should pass it through the bottom of the line stop and then thread the wire loop. If the fishing line does not pass under the line stop, the line stop will not work and it will easily cause messy threads; that is, remove the clamped wire from the line clip. Just take the thread head upward from the bottom of the thread block and thread it. Third, after threading is completed, remember to adjust the backstop button to the state where the reel rotates in one direction and close the line stop so that the fishing line can only be retracted but cannot be drawn out to avoid tangling the line.
Hook
After the hook wire is passed through the wire loop, the string hook is connected, and then the lead pendant is connected. A pair of string hook sea rods for fishing at the bottom is assembled. The connection of the sea pole line set is relatively simple, and the connection method of pins and 8-shaped rings is often used. Generally, a figure-8 ring can be reserved for the main line on the reel, and there are pins at the upper and lower ends of the string hook. The upper end is connected to the figure-8 ring on the main line that passes through the wire loop at the top of the sea pole, and the lower end is connected to the lead pendant. . Therefore, the connection of the sea pole line group is very convenient and fast.
Drag adjustment
Before casting the sea rod, you need to check the drag force of the reel, that is, pull the main line slightly to see if the tightness is appropriate. The tightness of the diarrhea force is generally adjusted by pulling the main line by hand so that the wheel can rotate freely and the line can be released. If it is not up to standard, properly tighten the drag adjustment knob until the tightness of the drag force is appropriate. The fishing rod can now be used for casting and fishing. The drag force is adjusted by loosening or tightening the drag force adjustment knob. The position of the drag force adjustment knob varies according to different types of reels. The drag adjustment knob of the front traction wheel is usually located above the cable trough, while the rear traction wheel is usually located below the wheel body.
After installing the reel, threading the line, connecting the hook and sinker, and adjusting the drag force, a sea rod is assembled and you can start casting and fishing.
A complete computer consists of the following equipment:
1. Monitor. The monitor is an output device (printer, speaker, and also an output device).
2. Host, the host is composed of the following accessories:
1), chassis, the outermost big thing, the "house" of all computer accessories.
2) The motherboard, the largest accessory in the computer, serves as a bridge between various accessories.
3), CPU, the brain of the computer, the data processing center, and the heart of the computer;
4), hard disk, the data warehouse of the computer, where all data is stored.
5), memory, memory is a temporary data center, data exchange center, the data temporarily read and stored by the CPU when doing data processing is in the memory, the data in the memory cannot be saved permanently, and the data is lost. Data is lost after power off.
6), power supply, the working power of all accessories of the host comes from it.
3. Keyboard and mouse.
Yes At present, the most popular type of computer is DIY complete machine, which is cost-effective and if you can successfully assemble it yourself, you will feel a great sense of accomplishment.
Regarding the purchase experience, if Xiaobai is new to DIY machines, it is recommended to go to Tieba forums and other places to find configurations. You can post a question and write down your requirements and budget price. If there are experts who can answer online, you can collect the accessories that more people have answered, combine them together, and then go to Taobao, JD.com, etc. to inquire, which will have better results. In short, if you have time, go to places like Tieba forums, which will benefit you a lot. Here are the recommended graphics cards, Tualatin, and every month in the graphics card bar, the masters will post some configurations. How much does it cost and what is it used for? You can find it in Tieba. Basically according to their configuration, there will be no problems.
You can go to Xianyu.com to connect the computer and the system will automatically recommend the price
The steps are as follows:
1. First, prepare all the accessories of the wireless mouse, including: a wireless mouse, 2 batteries matching the wireless mouse, and a USB plug-in for the mouse.
2. The next step is to install the mouse battery. First, gently open the mouse cover. Note: Just lift it gently from the high-curved tail of the mouse. Do not lift it from the scroll wheel (left and right buttons) to avoid damaging the mouse.
3. After opening the mouse cover, you can see that there are two battery slots on the left and right inside. The above prompts the battery installation direction of the positive and negative poles. According to this prompt, insert the 2 batteries and install them.
4. After installing the battery, close the mouse cover.
5. Next, find the notebook USB socket and insert the USB plug-in for the mouse into it.
6. At this time, press the computer power button to turn on the computer. Then turn the mouse over, turn it on, and the prompt light will light up. Note: "I" means open, O means closed.
The above is the detailed content of What is a complete computer set? The most powerful computer assembly set for 2,500 yuan?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
