What is the best configuration list for assembling a computer host?

Assembling a computer host is faced with various configuration options, making it difficult to make a choice. PHP editor Banana brings you the best configuration list for assembling a host, covering different budgets and performance needs, allowing you to easily build a host that meets your needs. The following content will introduce in detail the configuration solutions for different needs, from entry-level to high-end configurations, to help you make a wise choice.

The best configuration for assembling a computer host?

Assembled desktop computer configuration

1. High configuration desktop computer Recommendation:

First choice 1: Intel G1620 dual-core H61M motherboard. (Low price, good performance, great value!)

Preferred 2: Intel G1840 dual-core H81M motherboard. (Core graphics card performance is stronger than G1620)

2. Recommendation for mid-level models:

First choice 1: Intel G3250 dual-core H81M motherboard GT740 independent graphics.

Preferred 2: AMD The power consumption is higher and the temperature is higher, and the stability of long-term operation is lower than that of Intel. Secondly, the price of the matching interface motherboard is higher.

Although the X4 860K uses a new core, the technology has been improved, and the power consumption has been reduced. However, due to the lower frequency and the fact that the new core has not been substantially improved, the performance is weaker than the X4 760K (but the margin is very small) Less than 3%, so they can basically be regarded as having the same performance)

APU preferred: A8-6600K A85/A88 (not worthy of independent graphics)

A8-6600K is a cost-effective A high-end processor, the current price is much lower than the A10-7700K (to your surprise, the latter’s CPU performance is even lower)

Note: One of the latest models of APU is the A10-7850K, with built-in The APU performance is equivalent to that of GT630, so the price/performance ratio is not good. It is better to buy X4 860K and add a GT740 independent graphics.

3. Recommendations for mid-to-high-end models:

First choice: i3-4150/4160 H81M/B85M motherboard GTX750 or above level independent graphics

Note: It is not recommended to buy AMD FX As a six-core product, the FX series is a failure, with high temperature, high power consumption and poor performance.

4. Recommendations for advanced models:

First choice 1: i5-4590 B85M motherboard GTX760 (GTX960, GTX970) level independent graphics

First choice 2: E3-1230V3 B85M motherboard (Or E3-1230V2 B75M motherboard)

E3 was originally a server-class CPU, and is now widely used in desktop models. E3-1230V2 can be regarded as a down-clocked version of i7-3770, and E3-1230V3 can As a down-clocked version of the i7-4770, the performance is only about 5% lower than the corresponding i7 processor, but the price is only dozens of yuan more than the i5. There is no doubt that it has a super high cost performance!

Note What is the best configuration for building a dedicated gaming computer with the B75M and B

?

Computer configuration: Intel Core i9-12900KS is the latest 12th generation processor, and it is an unlocked special edition, 16 cores, 24 threads, 30MB L3 cache, the basic frequency is increased to 3.4GHz, and the Turbo frequency is updated Is it upgraded to 5.5GHz, 20 PCIe lanes, and supports DDR5 memory, which is the current performance ceiling level processor

The best configuration for 8k computer assembly?

Short answer: The best 8k computer assembly configuration is: Intel Core i9-11900K processor, NVIDIA GeForce RTX 3080 graphics card, 32GB DDR4 memory, 1TB NVMe solid state drive, 2TB mechanical hard drive, 1200W power supply, Z590 motherboard, Water cooling system.

In-depth analysis:

1. Processor: Intel Core i9-11900K is Intel’s latest desktop processor, using 14nm process, with 8 cores and 16 threads, and a base frequency of 3.5GHz , the maximum core frequency can reach 5.3GHz, and the performance is very strong.

2. Graphics card: NVIDIA GeForce RTX 3080 is one of the most powerful gaming graphics cards currently on the market. It adopts the Ampere architecture, has 8704 CUDA cores and 10GB GDDR6X video memory, and can provide excellent game performance and graphics rendering. Effect.

3. Memory: 32GB DDR4 memory is enough to meet the needs of most users and can provide smooth multitasking and gaming experience.

4. Hard drive: 1TB NVMe solid-state drive provides fast system startup and application loading speed, and 2TB mechanical hard drive provides a large amount of storage space.

5. Power supply: 1200W power supply can provide stable power supply for high-performance hardware to ensure system stability and reliability.

6. Motherboard: Z590 motherboard supports PCIe 4.0 bus and Thunderbolt 4 interface, which can provide faster data transmission speed and more expansion interfaces.

7. Cooling system: The water-cooling cooling system can effectively reduce the temperature of the processor and graphics card and improve the stability and performance of the system.

Quality suggestions:

1. Configure according to your own needs: The best configuration is not suitable for everyone. Users should configure according to their own needs and budget, and choose the one that suits them. hardware.

2. Pay attention to heat dissipation issues: High-performance hardware will generate a lot of heat and requires a suitable heat dissipation system to cool down, otherwise the stability and lifespan of the system will be affected.

3. Pay attention to the quality and power of the power supply: High-performance hardware requires a stable power supply, and users should choose a power supply with good quality and sufficient power.

4. Pay attention to the choice of hard drive: Solid-state hard drives provide fast read and write speeds, but are more expensive. Mechanical hard drives provide a large amount of storage space, but have slower read and write speeds. Users should choose the appropriate hard drive according to their own needs.

5. Pay attention to the scalability of the motherboard: The expansion interfaces and functions of the motherboard will affect the scalability and upgradeability of the system. Users should choose a motherboard with sufficient expansion interfaces and functions.

The best configuration for assembling a computer in 2023?

Recommended configuration for ordinary home or office computers:

1. It is recommended to use 13th generation i3.

2. Pair with 16G or 32G memory,

3. Pair with 512G or above nvme hard drive.

4. Power supply with rated power of 600 watts or above.

How to assemble the computer configuration?

1. Assembling a computer configuration requires certain skills and knowledge. 2. First, you need to clarify your needs and budget, and determine the purpose and performance requirements of the computer to be assembled. Then, select the appropriate hardware components such as motherboard, processor, memory, hard drive, graphics card, etc., and ensure compatibility between them. Next, install these hardware components into the computer chassis and connect the corresponding power cables, data cables, etc. Finally, install the operating system and necessary drivers. 3. Assembling a computer configuration is a relatively complex process that requires certain experience and skills. During the assembly process, you can also make some optimizations and adjustments based on personal needs, such as selecting a suitable radiator, adding additional fans, etc. Additionally, it's helpful to know some common troubleshooting methods.

Assemble computer configuration?

CPU Memory Motherboard Solid State Drive Power Supply and Chassis

The best configuration for building a computer in 2022?

1. CPU: Intel Core i5-10400F;

2. Motherboard: ASUS H410M-K;

3. Memory: Kingston 16GB DDR4 2666MHz;

4. Hard drive: Seagate Barracuda 1TB 7200 rpm;

5. Graphics card: Sapphire RX570 8G GDDR5;

6. Chassis: Kingston MasterBox Q300L;

7. Power supply : Kingston VS450 450W;

i712700k best configuration list for assembled computers?

The best configuration recommendation for i7 12700k assembled computer:

CPU Intel i7 12700k boxed

Cooling Fortress 240 integrated water cooling

Motherboard ASUS b660m Heavy Gunner WiFi

Memory Yingruida Platinum ddr4 3600 8gⅹ2

Graphics card ASUS tuf rtx3060ti e-sports graphics card

SSD Western Digital SN750 1t nvme

Power supply Great Wall G6 650W gold medal Full module

Chassis Patriot A15

Explanation that the chassis can be optional

i3 What is the best configuration for assembling a computer?

List:

1. Processor: Intel Core i3-8350K (boxed);

2. Radiator: comes with the box;

3. Graphics card: Zotac GTX1060

#6. Solid state drive: Taipower NS550 128G M.2 solid state drive;

7. Mechanical hard drive WD 1T 7200 rpm mechanical hard drive;

8. Chassis: Xingu HALO Guangyun Computer case;

9. Power supply: Great Wall HOPE-5500ZK power supply (rated 450W).

Novices buy the configuration and assemble their own computers. How do they assemble it?

I have opened a Dian Ao repair shop before. In fact, the motherboard, CPU, memory, power supply, and hard disk can be installed according to the motherboard instructions. You can also look at other people's installation photos to know which components are plugged into the computer. The accessories on it are generally plugged in incorrectly. Don't force it in. I'll find a picture for you to take a look.

As long as the interface is plugged in, you can usually prepare an empty U disk to install the system U disk system on the computer. Just go to Baidu to download a Chinese cabbage and install it directly in the next step

http://www.lotpc.com/zjjc/6281.html

There are also tutorials here that you can refer to. It's very simple. Some things I haven't done yet feel troublesome. If you do it, it's actually very simple.

The above is the detailed content of What is the best configuration list for assembling a computer host?. For more information, please follow other related articles on the PHP Chinese website!