smtp邮件发送一例
require("smtp.php");
$smtp=new smtp_class;
$smtp->host_name="mail.xiaocui.com";
$smtp->localhost="localhost";
$from="webmaster@xiaocui.com";
$to="root@xiaocui.com";
if($smtp->SendMessage(
$from,
array(
$to
),
array(
"From: $from",
"To: $to",
"Subject: Testing Manuel Lemos' SMTP class"
),
"Hello $to,\n\nIt is just to let you know that your SMTP class is working just fine.\n\nBye.\n"))
echo "Message sent to $to OK.\n";
else
echo "Cound not send the message to $to.\nError: ".$smtp->error."\n"
?>
smtp.php
class smtp_class
{
var $host_name="";
var $host_port=25;
var $localhost="";
var $timeout=0;
var $error="";
var $debug=1;
var $esmtp=1;
var $esmtp_host="";
var $esmtp_extensions=array();
var $maximum_piped_recipients=100;
/* PRivate variables - DO NOT access */
var $state="Disconnected";
var $connection=0;
var $pending_recipients=0;
/* Private methods - DO NOT CALL */
Function OutputDebug($message)
{
echo $message,"
\n";
}
Function GetLine()
{
for($line="";;)
{
if(feof($this->connection))
{
$this->error="reached the end of stream while reading from socket";
return(0);
}
if(($data=fgets($this->connection,100))==false)
{
$this->error="it was not possible to read line from socket";
return(0);
}
$line.=$data;
$length=strlen($line);
if($length>=2
&& substr($line,$length-2,2)=="\r\n")
{
$line=substr($line,0,$length-2);
if($this->debug)
$this->OutputDebug(" return($line);
}
}
}
Function PutLine($line)
{
if($this->debug)
$this->OutputDebug("> $line");
if(!fputs($this->connection,"$line\r\n"))
{
$this->error="it was not possible to write line to socket";
return(0);
}
return(1);
}
Function PutData($data)
{
if(strlen($data))
{
if($this->debug)
$this->OutputDebug("> $data");
if(!fputs($this->connection,$data))
{
$this->error="it was not possible to write data to socket";
return(0);
}
}
return(1);
}
Function VerifyResultLines($code,$responses="")
{
if(GetType($responses)!="array")
$responses=array();
Unset($match_code);
while(($line=$this->GetLine($this->connection)))
{
if(IsSet($match_code))
{
if(strcmp(strtok($line," -"),$match_code))
{
$this->error=$line;
return(0);
}
}
else
{
$match_code=strtok($line," -");
if(GetType($code)=="array")
{
for($codes=0;$codes
{
$this->error=$line;
return(0);
}
}
else
{
if(strcmp($match_code,$code))
{
$this->error=$line;
return(0);
}
}
}
$responses[]=strtok("");
if(!strcmp($match_code,strtok($line," ")))
return(1);
}
return(-1);
}
Function FlushRecipients()
{
if($this->pending_sender)
{
if($this->VerifyResultLines("250") return(0);
$this->pending_sender=0;
}
for(;$this->pending_recipients;$this->pending_recipients--)
{
if($this->VerifyResultLines(array("250","251")) return(0);
}
return(1);
}
/* Public methods */
Function Connect()
{
$this->error=$error="";
$this->esmtp_host="";
$this->esmtp_extensions=array();
if(!($this->connection=($this->timeout ? fsockopen($this->host_name,$this->host_port,&$errno,&$error,$this->timeout) : fsockopen($this->host_name,$this->host_port))))
{
switch($error)
{
case -3:
$this->error="-3 socket could not be created";
return(0);
case -4:
$this->error="-4 dns lookup on hostname \"".$host_name."\" failed";
return(0);
case -5:
$this->error="-5 connection refused or timed out";
return(0);
case -6:
$this->error="-6 fdopen() call failed";
return(0);
case -7:
$this->error="-7 setvbuf() call failed";
return(0);
default:
$this->error=$error." could not connect to the host \"".$this->host_name."\"";
return(0);
}
}
else
{
if(!strcmp($localhost=$this->localhost,"")
&& !strcmp($localhost=getenv("SERVER_NAME"),"")
&& !strcmp($localhost=getenv("HOST"),""))
$localhost="localhost";
$success=0;
if($this->VerifyResultLines("220")>0)
{
if($this->esmtp)
{
$responses=array();
if($this->PutLine("EHLO $localhost")
&& $this->VerifyResultLines("250",&$responses)>0)
{
$this->esmtp_host=strtok($responses[0]," ");
for($response=1;$response
$extension=strtoupper(strtok($responses[$response]," "));
$this->esmtp_extensions[$extension]=strtok("");
}
$success=1;
}
}
if(!$success
&& $this->PutLine("HELO $localhost")
&& $this->VerifyResultLines("250")>0)
$success=1;
}
if($success)
{
$this->state="Connected";
return(1);
}
else
{
fclose($this->connection);
$this->connection=0;
$this->state="Disconnected";
return(0);
}
}
}
Function MailFrom($sender)
{
if(strcmp($this->state,"Connected"))
{
$this->error="connection is not in the initial state";
return(0);
}
$this->error="";
if(!$this->PutLine("MAIL FROM: "))
return(0);
if(!IsSet($this->esmtp_extensions["PIPELINING"])
&& $this->VerifyResultLines("250") return(0);
$this->state="SenderSet";
if(IsSet($this->esmtp_extensions["PIPELINING"]))
$this->pending_sender=1;
$this->pending_recipients=0;
return(1);
}
Function SetRecipient($recipient)
{
switch($this->state)
{
case "SenderSet":
case "RecipientSet":
break;
default:
$this->error="connection is not in the recipient setting state";
return(0);
}
$this->error="";
if(!$this->PutLine("RCPT TO:"))
return(0);
if(IsSet($this->esmtp_extensions["PIPELINING"]))
{
$this->pending_recipients++;
if($this->pending_recipients>=$this->maximum_piped_recipients)
{
if(!$this->FlushRecipients())
return(0);
}
}
else
{
if($this->VerifyResultLines(array("250","251")) return(0);
}
$this->state="RecipientSet";
return(1);
}
Function StartData()
{
if(strcmp($this->state,"RecipientSet"))
{
$this->error="connection is not in the start sending data state";
return(0);
}
$this->error="";
if(!$this->PutLine("DATA"))
return(0);
if($this->pending_recipients)
{
if(!$this->FlushRecipients())
return(0);
}
if($this->VerifyResultLines("354") return(0);
$this->state="SendingData";
return(1);
}
Function PrepareData($data,&$output)
{
$length=strlen(&$data);
for($output="",$position=0;$position {
$next_position=$length;
for($current=$position;$current {
switch($data[$current])
{
case "\n":
$next_position=$current+1;
break 2;
case "\r":
$next_position=$current+1;
if($data[$next_position]=="\n")
$next_position++;
break 2;
}
}
if($data[$position]==".")
$output.=".";
$output.=substr(&$data,$position,$current-$position)."\r\n";
$position=$next_position;
}
}
Function SendData($data)
{
if(strcmp($this->state,"SendingData"))
{
$this->error="connection is not in the sending data state";
return(0);
}
$this->error="";
return($this->PutData(&$data));
}
Function EndSendingData()
{
if(strcmp($this->state,"SendingData"))
{
$this->error="connection is not in the sending data state";
return(0);
}
$this->error="";
if(!$this->PutLine("\r\n.")
|| $this->VerifyResultLines("250") return(0);
$this->state="Connected";
return(1);
}
Function ResetConnection()
{
switch($this->state)
{
case "Connected":
return(1);
case "SendingData":
$this->error="can not reset the connection while sending data";
return(0);
case "Disconnected":
$this->error="can not reset the connection before it is established";
return(0);
}
$this->error="";
if(!$this->PutLine("RSET")
|| $this->VerifyResultLines("250") return(0);
$this->state="Connected";
return(1);
}
Function Disconnect($quit=1)
{
if(!strcmp($this->state,"Disconnected"))
{
$this->error="it was not previously established a SMTP connection";
return(0);
}
$this->error="";
if(!strcmp($this->state,"Connected")
&& $quit
&& (!$this->PutLine("QUIT")
|| $this->VerifyResultLines("221") return(0);
fclose($this->connection);
$this->connection=0;
$this->state="Disconnected";
return(1);
}
Function SendMessage($sender,$recipients,$headers,$body)
{
if(($success=$this->Connect()))
{
if(($success=$this->MailFrom($sender)))
{
for($recipient=0;$recipient
if(!($success=$this->SetRecipient($recipients[$recipient])))
break;
}
if($success
&& ($success=$this->StartData()))
{
for($header_data="",$header=0;$header
if(($success=$this->SendData($header_data."\r\n")))
{
$this->PrepareData($body,&$body_data);
$success=$this->SendData($body_data);
}
if($success)
$success=$this->EndSendingData();
}
}
$disconnect_success=$this->Disconnect($success);
if($success)
$success=$disconnect_success;
}
return($success);
}
};
?>

Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!

Hot Article

Hot Tools

Notepad++7.3.1
Easy-to-use and free code editor

SublimeText3 Chinese version
Chinese version, very easy to use

Zend Studio 13.0.1
Powerful PHP integrated development environment

Dreamweaver CS6
Visual web development tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

Hot Topics



Alipay PHP...

JWT is an open standard based on JSON, used to securely transmit information between parties, mainly for identity authentication and information exchange. 1. JWT consists of three parts: Header, Payload and Signature. 2. The working principle of JWT includes three steps: generating JWT, verifying JWT and parsing Payload. 3. When using JWT for authentication in PHP, JWT can be generated and verified, and user role and permission information can be included in advanced usage. 4. Common errors include signature verification failure, token expiration, and payload oversized. Debugging skills include using debugging tools and logging. 5. Performance optimization and best practices include using appropriate signature algorithms, setting validity periods reasonably,

The application of SOLID principle in PHP development includes: 1. Single responsibility principle (SRP): Each class is responsible for only one function. 2. Open and close principle (OCP): Changes are achieved through extension rather than modification. 3. Lisch's Substitution Principle (LSP): Subclasses can replace base classes without affecting program accuracy. 4. Interface isolation principle (ISP): Use fine-grained interfaces to avoid dependencies and unused methods. 5. Dependency inversion principle (DIP): High and low-level modules rely on abstraction and are implemented through dependency injection.

How to automatically set the permissions of unixsocket after the system restarts. Every time the system restarts, we need to execute the following command to modify the permissions of unixsocket: sudo...

How to debug CLI mode in PHPStorm? When developing with PHPStorm, sometimes we need to debug PHP in command line interface (CLI) mode...

Sending JSON data using PHP's cURL library In PHP development, it is often necessary to interact with external APIs. One of the common ways is to use cURL library to send POST�...

Static binding (static::) implements late static binding (LSB) in PHP, allowing calling classes to be referenced in static contexts rather than defining classes. 1) The parsing process is performed at runtime, 2) Look up the call class in the inheritance relationship, 3) It may bring performance overhead.

Article discusses late static binding (LSB) in PHP, introduced in PHP 5.3, allowing runtime resolution of static method calls for more flexible inheritance.Main issue: LSB vs. traditional polymorphism; LSB's practical applications and potential perfo
