What wires are needed to assemble a computer? What wires are needed to assemble a desktop computer?

Assembling a computer requires, in addition to core components such as motherboard, CPU, memory, and graphics card, various data cables and power cables to connect these components. So, what wires are needed to assemble a computer? PHP editor Youzi will answer them one by one below to guide you to install the computer smoothly.

What wires are needed to assemble a computer?

Too much.

First, two power cords are needed. One is to understand the socket and the host, and the other is to understand the socket and the monitor.

Second, the data cable connects the monitor and the host.

Third, the color difference cable connects the sound card and speakers.

Fourth, the microphone cable connects the sound card and microphone.

Fifth, the hard drive cable connects the hard drive to the motherboard.

Sixth, the drive cable connects the optical drive to the motherboard.

Seventh, expansion device cables, some are connected to the motherboard, and some are connected to the sound card

Eighth, USB cable, this is very common now.

What wires are needed to assemble a desktop computer?

No additional purchase required.

The monitor comes with its own power cord and VGA cable.

The hardware part of the chassis includes: power supply, hard disk, memory stick, motherboard, CPU-central processing unit, optical drive, sound card, network card, graphics card, etc.

1. The chassis comes with a switch key line, usb Connecting cable;

2. The hard disk usually comes with a SATA cable;

3. The motherboard comes with SATA cables (1-2);

4. The power supply comes with the outside of the chassis The three-port power cord used and the various cable sockets used in the chassis (motherboard, hard disk, optical drive, etc.);

5. Intel CPU box comes with a cooling fan;

6. The optical drive is general Comes with a SATA cable.

Do I need to buy additional cables to assemble my own computer?

need.

1. During the process of assembling a computer, a variety of connecting cables are required, such as motherboard power cables, SATA data cables, graphics card power supply cables, etc. However, these cables are not provided with the accessories and need to be purchased separately.

2. Different computer configurations require different quantities and types of wires. The wires that need to be purchased are not fixed and need to be purchased according to the actual needs of your own computer configuration.

3. The correct selection and purchase of wires can ensure the stable operation of the computer, prevent problems such as insufficient line charging and poor quality, and improve the stability and efficiency of the computer.

What wires are needed to assemble a computer?

The data cable that connects the motherboard to the optical drive. If there are two hard drives, you need to purchase an additional data cable that connects the motherboard to the hard drive. Then the remaining wires are the panel switch wires of the chassis itself, the power indicator wires, the hard disk indicator wires, the reset button wires, and you have to buy a computer alarm with an alarm buzzer installed on the motherboard. There is also a power supply with a power cord, and there are no other cords.

How long does it take to assemble the computer?

If you just install the hardware, CPU, graphics card, memory module, etc., ten minutes is enough to complete. But if it is to be assembled into a computer that can be used normally, in addition to the installation of hardware, it is also necessary to install the system, software, etc., which takes about half an hour to an hour.

How to plug in the computer assembly?

1. First insert the 24PIN in the power supply into the 24PIN slot on the motherboard. This item is the mainboard power supply line: after the motherboard power supply connection number.

2. Then there is the CPU power supply. Look at the motherboard. If it is 8PIN, just combine it and insert it. Generally, the CPU power supply is 4PIN. Insert the 4PIN interface in the power supply into the 4PIN slot near the CPU.

3. Then pay attention to whether your graphics card has a 4PIN interface. Generally, low-end graphics cards do not have it.

How to assemble computer cables?

Just plug in the internal lines of the computer and connect them. For external lines, just pay attention to the connection position so that it does not get in the way.

How to assemble and plug in the computer?

1.

The front panel connections of the chassis generally include front audio, front USB, power indicator light, hard disk indicator light, power on, and restart.

The wiring diagrams for these connections are generally explained in the motherboard manual.

If not, check that it is written on the motherboard. Pay attention to the position of the pins.

They are basically connected in this way. The HD-LED on the motherboard is the hard disk working indicator light, so just write the thread. There are: H..D.D.LED is plugged in. The SP-LED on the mainboard is the power working indicator light. Just plug in the positive and negative ends of the wire with "P" written on it. If the two indicator lights are plugged in reverse, the positive and negative ends are plugged in. Level, the light will not light up after power on. For the one that does not light up, just change the positive and negative directions.

2.

The RST on the motherboard is the reset button. Write RESET on the wire. Plug in the SW. PW-BN on the motherboard is the power-on button. Plug in the one with POWER SW written on the wire.

3.

SPEAKER is the front buzzer, divided into """-" phase; it can happen with ordinary speakers no matter how they are connected, but it is special here. Since the voltage value of 5V is provided on the " " phase, we must install it correctly to ensure that the buzzer sounds.

4.

The following is the front audio. The F-AUDIO on the motherboard is the location of the front audio interface. It is different from the USB. USB has one less pin on the side. The audio is on the 4th pin with one less pin, just plug it into the corresponding position

5.

The front panel connection is completed. Finally, connect the power supply and hard disk. The SATA data cable is in the shape of an inverted 7-character row. Don’t worry about plugging it in wrong. If you plug it in wrongly, you can’t plug it in. The hard disk movie cable is better than The data cable should be wide and similar in shape and installation. Connect it to the hard disk

6.

Just align it and insert it. The other end of the SATA data cable is plugged into the SATA interface on the motherboard. above. That's it, now connect the power supply to the motherboard.

7.

The motherboard is powered by 24P. The old motherboard used to be 20P, so I took it out and there are 4 active ones on the side.

8.

The CPU has 8P power supply, and there are also 4P power supply. Both the motherboard and CPU power supply are designed to be fool-proof. Don’t worry about plugging it in wrongly. If you plug it in the wrong direction, you won’t be able to plug it in.

9.

Connect to the corresponding interface. Look at the motherboard interface diagram above. The graphics card power supply is 6P, and there are also 8P. It can be disassembled, and the graphics card power interface is plugged in. That's it.

10.

The installation is complete. If your case is side-transparent, you can install a strip of polarizing light, which will look much better. If it is not side-transparent, there is no need to install it. You are good to go. For a chassis with back-line cables, put the cables at the back so it looks nice. After installation, untie the cables and tie up the ones that need to be tied up with zip ties to make it look more comfortable.

What do I need to buy to assemble my own computer?

Buy a computer display, host, network cable, mouse and keyboard, thank you for asking

What accessories are needed to assemble a computer?

The accessories needed to assemble a computer include the following:

CPU (Central Processing Unit): The brain of the computer, responsible for processing data and running programs.

Motherboard: An important component that connects various hardware devices, including CPU slots, memory slots, graphics card slots, etc.

Memory stick: stores the data required for the computer to run programs. There are usually two types: DDR3 and DDR4.

Hard disk/solid-state drive: A device that stores computer system and user data. There are usually two types of hard drives: mechanical hard drives and solid-state drives.

Graphics card: Processes the computer's graphics output and provides visual effects such as games and videos.

Power supply: Provides power supply to the computer to ensure the normal operation of each hardware device.

Chassis: used to load computer hardware and protect hardware equipment and the entire computer system.

Monitor: The display device for computer output graphics.

Keyboard/Mouse: Used to operate the computer system.

Other auxiliary equipment: such as speakers, cameras, etc., used to meet the needs of different users.

When assembling a computer, you also need to pay attention to the compatibility procedures between various hardware devices to ensure the stability and performance of the entire computer system. performance and connectivity, as well as selecting the appropriate operating system and drivers.

The above is the detailed content of What wires are needed to assemble a computer? What wires are needed to assemble a desktop computer?. For more information, please follow other related articles on the PHP Chinese website!