3D drawing computer configuration and assembly recommendations?

Many friends tend to ignore the computer configuration requirements for 3D drawing when assembling computers, resulting in problems such as lags and delays during later use. This article will provide you with 3D graphics computer configuration and assembly recommendations, detailing the selection and matching of each component to help you build a powerful 3D graphics computer to meet professional modeling, rendering and other needs. Continue reading below to learn about the specific configuration options and assembly techniques to create your own 3D drawing workstation.

3D drawing computer configuration and assembly recommendations?

If used for 3D renderings, the laptop configuration requirements are as follows:

1. Operating system: Windows 7 (64-bit is recommended)

2. Memory: At least 2GB (recommended 4GB and above)

3. Graphics card: video memory 1G and above, bit width 256 bit and above, video memory type DDR3 or above, it is recommended to use NVIDIA brand graphics card (it is recommended to use professional graphics card certified by SolidWorks: Such as: NVIDIA Quadro series, ATI FireGL series or Firepro series)

4.CPU: intel dual-core high frequency 64bit, it is recommended to use i5 series or i7 series, it is recommended that the CPU frequency is higher than 2.8GHz, central processing unit Must support SSE2 (Streaming SIMD Extensions 2)

5. Hard disk: no less than 7200 rpm

6. Software: office 2007 or 2010

7. Monitor: resolution No less than 1400X900

If you want a better experience, better productivity, and a sufficient budget, then Dell XPS is a very good choice. Especially for content creators, such as designers, video editors, photographers, or word data processors, the XPS's 4K large screen is a powerful assist. Even if you occasionally need to use the computer outdoors, the 500nit brightness screen provides a good experience when used outdoors.

I want to buy computer configuration and assemble the computer outside, but I don’t know how to install it. What should I do?

If you want to do this, you must first consider these issues.

1. Hardware configuration selection, including platform selection, CPU matching motherboard, memory, graphics card, and chassis. These information can be queried through the Internet for corresponding parameters and prices.

2.Hardware assembly. To assemble a computer, you need to prepare some tools, including Torx screwdrivers, CPU, fans, motherboard jumpers (it’s a little complicated, please read the manual), memory installation, and graphics card installation.

3. System installation.

If you want to do it yourself, see if these 3 aspects can be solved. 3 can be handled by a computer store, which costs dozens of dollars. The second one has more problems and may cause many problems, such as If it does not turn on, there will be no display when it is turned on, incorrect wiring may burn something or the panel indicator light may not light up. If you think the above problems can be solved or find someone to help you solve them, then do it yourself. Self-assembly is more suitable for people with assembly experience.

Could you please give me some advice on the computer configuration for playing CrossFire? The cheaper the assembled machine, the better. Can it run CrossFire perfectly?

The new configuration is as follows: Intel i39100F processor chip: 499 yuan, overclocked three Red Sea MINICPU radiator: 36 yuan, ASRock B365M-HDV motherboard: 429 yuan, Maxxuan GTX1050Ti4G graphics card: 799 yuan, ADATA Gaming Veyron DDR426668G memory: 225 yuan, Ying Ruida BX500240G solid state drive: 209 yuan, Great Wall PRIME450 power supply: 219 yuan, Patriot A20 chassis: 109 yuan,

Assembled computer configuration?

CPU Memory Motherboard Solid State Drive Power Supply and Chassis

Knowledge of assembly computer configuration?

Configuration knowledge for assembling a computer includes the following points:

Motherboard: Choose a motherboard that suits your needs. Pay attention to the type and number of interfaces on the motherboard, as well as the supported processor and memory types.

Processor: Choose a processor that suits your needs, paying attention to the processor model, core number, main frequency and other parameters.

Memory: Choose a memory module suitable for the motherboard and processor, and pay attention to the memory capacity and frequency.

Hard drive: Choose a hard drive that suits your needs. You can choose a traditional mechanical hard drive or a solid-state hard drive. Pay attention to the capacity and interface type.

Graphics card: If you need to perform graphics processing or games, you can choose an independent graphics card. Pay attention to the model and memory capacity of the graphics card.

Power supply: Choose a power supply that suits your configuration, paying attention to the power and interface type of the power supply.

Radiator: Choose a radiator suitable for the processor to ensure that the processor maintains normal temperature when working.

Other accessories: Choose appropriate monitors, keyboards, mice and other peripherals as needed.

When assembling a computer, you need to pay attention to the following points:

Electrostatic protection: During the assembly process, pay attention to prevent static electricity from damaging electronic components. You can use an electrostatic bracelet or touch a metal object to release it. static electricity.

Installation sequence: Follow the instructions in the motherboard manual, first install core components such as processor, memory, and hard disk, and then connect peripherals such as power supply and graphics card.

Connect cables: Pay attention to correctly connecting the cables between each component to ensure normal signal transmission.

Heat dissipation treatment: When installing the radiator, pay attention to the fit between the heat sink and the processor, and use an appropriate amount of heat dissipation silicone grease.

Software installation: After assembly is completed, the operating system and drivers need to be installed to ensure the normal operation of the computer.

The above is the detailed content of 3D drawing computer configuration and assembly recommendations?. For more information, please follow other related articles on the PHP Chinese website!