How to install the system after the computer is assembled?
Many friends are confused about how to install the system after assembling the computer. PHP editor Apple brings you a detailed system installation guide. From selecting the operating system to completing the installation, he teaches you step by step how to inject soul into your computer. Now, let us start the system installation journey together!
How to install the system after the computer is assembled?
First of all, you need to prepare an 8 GB U disk. If you are a novice, you can only go to an Internet cafe, or download the Laomaotao U disk PE system from the computers of colleagues and friends, or Chinese cabbage, U disk PE system, these two PE systems are the simplest and easiest to operate. They do not require complicated settings. You only need to download two softwares. For either one, install the U disk to the USB interface and proceed to the next step through the software prompts. , after the installation is completed, you can test whether the U disk PE system is installed through simulated startup
Of course, these two PE systems will release third-party software installations, such as 2345 browser, after the system is installed. Or 360 security software, some software installed on the C drive by default
You can also choose the relatively pure PE system installation software of micro PE. After the installation is completed, test the normal startup, and then copy the downloaded mirror system Go to, U disk
If you don’t use the U disk as the first boot item, enter the BIOS settings, just restart the computer and use the keyboard shortcuts
Ecs, F9, If you press F10, F11, F12, or delete while the hardware self-test is in progress, it will switch to the U disk boot mode. Select the U disk as the startup item to enter the PE system.
After entering the PE system, Assume that you are installing a 256GB solid-state drive and the installation system is WINDOWS 10. Then set the space of the C drive to 60 GB to 80 GB to ensure that in the future use of the system, it will not easily cause insufficient space on the C drive. phenomenon, affecting the system's operating data exchange, resulting in slow operation, and use the HD hard disk tool built into the PE system to select 4096 when partitioning the hard disk, which is the 4K alignment mode for partitioning, to avoid failure of the hard disk caused by not selecting 4K alignment. A series of situations such as slower reading and writing speeds occur
After the partition is completed, use the PE system's built-in system installation tool to copy the image file. Do not restart directly after copying. Select the startup file repair tool to repair the boot file. Perform a repair boot to avoid failure to recognize the boot file during the restart process, causing the system installation to fail.
How to install the system after the computer is assembled?
Copy the system with a USB disk, and then install it
Tutorial on assembling a computer and installing the system?
Nowadays, the system installation for assembling computers is very simple and convenient, and only requires a CD.
First enter the bios settings, set the computer to boot first with the CD-ROM drive, then restart the computer and load the system CD into the CD-ROM drive.
The CD will automatically enter the installation state. At this time, you only need to manually re-partition the partitions, and the rest will be completed automatically.
How to install the system after the computer is assembled?
You can use a USB flash drive to install the system after assembly. After the computer is assembled, a U disk is required to install the system. You can download the U boot disk creation tool of the Win 10 system on other computer devices, and then prepare a U disk of more than 8G to make a U boot disk. , after making the boot door, we only need to boot the assembled computer and enter the BIOS.
Set the U disk startup item as the first boot item, and we can use the prepared startup disk to automatically install the system.
How to install the system after assembling the computer by yourself?
1. On the system page, click Reinstall Now
2. Wait for the system to download
3. After the download is completed, click Restart Now
4. Click Select Windows7 system
5. Finally, the installation is successful
How to install the system after assembling the computer and lighting it up?
Hello, after assembling the computer and lighting it up, you can follow the following steps to install the system:
1. Prepare an installation disk or U disk. You can download the Windows system image file from the official website and use Rufus or other tools to make it into a USB boot disk.
2. Insert the USB flash drive into the computer, restart the computer and press F12, F11 or F2 to enter the BIOS setting interface.
3. In the BIOS setting interface, find the "Boot" option and put the USB boot device first.
4. Save the settings and exit the BIOS. The computer will automatically restart and boot from the USB flash drive.
5. After entering the system installation interface, follow the prompts. Select the system version to be installed, installation location, etc.
6. After the system installation is completed, enter the user name, password and other information according to the prompts to complete the system settings.
7. After the installation is complete, you can download and install drivers and software.
Notes:
1. Before installing the system, it is best to back up important data to prevent data loss.
2. When installing the system, you need to pay attention to selecting the correct system version, otherwise it may not work properly.
3. After the installation is complete, you need to install the driver, otherwise the hardware may not work properly or the performance may be reduced.
4. When installing software, it is best to choose genuine software to avoid copyright issues.
How to install the system after assembling the computer by yourself?
After assembling the computer yourself, you need to prepare an operating system installation disk or USB flash drive, insert it into the computer and start the computer.
When the computer is turned on, you can press the F12 or DEL key to enter the BIOS settings and choose to boot from the installation disk or U disk.
Then follow the steps prompted by the installer to install the operating system, including selecting the installation hard disk, allocating disk space, entering the product key, setting the user name and password, etc.
During the installation process, you need to pay attention to selecting the correct operating system version, such as Windows 10 Home Edition or Professional Edition.
After the installation is completed, drivers and other software need to be installed to enable the computer to run and be used normally.
How to install the system after assembling the computer?
The installation method is as follows
1. Prepare the system installation disk or USB boot installation disk.
2. Set the BIOS to boot first. If the system disk is set to CD-ROM boot, if the USB boot disk is set to USB boot.
3. Press any key to enter the installation interface, select the correct installation method and installation drive letter, the system will automatically install the system, we only need to wait for the end, but you need to operate it at certain times, such as: time, Language settings, etc.
4. After the installation is completed, it is still not possible, because some system disks may have some drivers, but it is recommended to install the latest drivers.
How to assemble and reinstall the computer system?
1. Turn on the computer and press the F2 key to enter the BIOS setting interface, select Advanced BIOS Settings: Advanced BIOS Features;
2. Advanced BIOS Settings (Advanced BIOS Features) interface, first select the hard disk boot priority level, Hard Disk Boot Priority;
3. Hard Disk Boot Priority selection: Use the plus and minus signs ", -" on the small keyboard to select the mobile device, and select the U disk in On the top.
4. Then select the first boot device (First Boot Device): select the U disk to boot.
5. Then restart to start the step-by-step installation. The installation process will restart several times, just wait.
6. After installing the system, remember to install the driver!
How to install the system after the computer is assembled in 2021?
You can use the U disk to boot and use the U disk to install the Windows system.
The above is the detailed content of How to install the system after the computer is assembled?. For more information, please follow other related articles on the PHP Chinese website!
Hot AI Tools
Undresser.AI Undress
AI-powered app for creating realistic nude photos
AI Clothes Remover
Online AI tool for removing clothes from photos.
Undress AI Tool
Undress images for free
Clothoff.io
AI clothes remover
AI Hentai Generator
Generate AI Hentai for free.
Hot Article
Hot Tools
Notepad++7.3.1
Easy-to-use and free code editor
SublimeText3 Chinese version
Chinese version, very easy to use
Zend Studio 13.0.1
Powerful PHP integrated development environment
Dreamweaver CS6
Visual web development tools
SublimeText3 Mac version
God-level code editing software (SublimeText3)
Hot Topics
1376
52
Solutions to the errors reported by MySQL on a specific system version
Apr 08, 2025 am 11:54 AM
The solution to MySQL installation error is: 1. Carefully check the system environment to ensure that the MySQL dependency library requirements are met. Different operating systems and version requirements are different; 2. Carefully read the error message and take corresponding measures according to prompts (such as missing library files or insufficient permissions), such as installing dependencies or using sudo commands; 3. If necessary, try to install the source code and carefully check the compilation log, but this requires a certain amount of Linux knowledge and experience. The key to ultimately solving the problem is to carefully check the system environment and error information, and refer to the official documents.
How to solve mysql cannot be started
Apr 08, 2025 pm 02:21 PM
There are many reasons why MySQL startup fails, and it can be diagnosed by checking the error log. Common causes include port conflicts (check port occupancy and modify configuration), permission issues (check service running user permissions), configuration file errors (check parameter settings), data directory corruption (restore data or rebuild table space), InnoDB table space issues (check ibdata1 files), plug-in loading failure (check error log). When solving problems, you should analyze them based on the error log, find the root cause of the problem, and develop the habit of backing up data regularly to prevent and solve problems.
How to use sql datetime
Apr 09, 2025 pm 06:09 PM
The DATETIME data type is used to store high-precision date and time information, ranging from 0001-01-01 00:00:00 to 9999-12-31 23:59:59.99999999, and the syntax is DATETIME(precision), where precision specifies the accuracy after the decimal point (0-7), and the default is 3. It supports sorting, calculation, and time zone conversion functions, but needs to be aware of potential issues when converting precision, range and time zones.
Can I retrieve the database password in Navicat?
Apr 08, 2025 pm 09:51 PM
Navicat itself does not store the database password, and can only retrieve the encrypted password. Solution: 1. Check the password manager; 2. Check Navicat's "Remember Password" function; 3. Reset the database password; 4. Contact the database administrator.
How to backup and restore database after mysql installation
Apr 08, 2025 am 11:45 AM
There is no absolutely optimal MySQL database backup and recovery solution, and it needs to be selected based on the amount of data, business importance, RTO and RPO. 1. Logical backup (mysqldump) is simple and easy to use, suitable for small databases, but slow and huge files; 2. Physical backup (xtrabackup) is fast, suitable for large databases, but is more complicated to use. The backup strategy needs to consider the backup frequency (RPO decision), backup method (data quantity and time requirement decision) and storage location (off-site storage is more secure), and regularly test the backup and recovery process to avoid backup file corruption, permission problems, insufficient storage space, network interruption and untested issues, and ensure data security.
How to view database password in Navicat for MariaDB?
Apr 08, 2025 pm 09:18 PM
Navicat for MariaDB cannot view the database password directly because the password is stored in encrypted form. To ensure the database security, there are three ways to reset your password: reset your password through Navicat and set a complex password. View the configuration file (not recommended, high risk). Use system command line tools (not recommended, you need to be proficient in command line tools).
Navicat's method to view PostgreSQL database password
Apr 08, 2025 pm 09:57 PM
It is impossible to view PostgreSQL passwords directly from Navicat, because Navicat stores passwords encrypted for security reasons. To confirm the password, try to connect to the database; to modify the password, please use the graphical interface of psql or Navicat; for other purposes, you need to configure connection parameters in the code to avoid hard-coded passwords. To enhance security, it is recommended to use strong passwords, periodic modifications and enable multi-factor authentication.
Does mysql need the internet
Apr 08, 2025 pm 02:18 PM
MySQL can run without network connections for basic data storage and management. However, network connection is required for interaction with other systems, remote access, or using advanced features such as replication and clustering. Additionally, security measures (such as firewalls), performance optimization (choose the right network connection), and data backup are critical to connecting to the Internet.
