Will there be any incompatibility when assembling a computer?

When assembling a computer, incompatibility issues are a problem that plagues many installers. This article will delve into the reasons for incompatibility in assembled computers, common types of incompatibility, and practical tips for solving incompatibility issues. Read on to learn how to avoid the incompatibility worries of building a computer and create a stable and efficient PC.

# Assembling a computer by yourself, if you don’t know much about computers, the most likely problem is that the hardware is incompatible. First: and the most important thing is that the sockets of the CPU and the motherboard are incompatible. This phenomenon is not uncommon, and the prices of these two things are relatively high. Therefore, the choice of the two major computer hardware, CPU and motherboard, is the most critical, whether it is CPUs and motherboards are divided into two major chip categories, one is INTEL and the other is AMD. If these two chips are different, they are definitely incompatible. So, first of all, both things must be INTLE. The cores are either AMD cores, and each type of core has different sockets. You can check online to see if the motherboard and CPU you bought have the same sockets. If the sockets are the same, that's it.

Second: Selection of memory modules. Current memory includes DDR, second generation, and third generation memory. Each generation of memory is a little different. After you buy the motherboard, check the motherboard manual to see if it can support it. You should buy several generations of memory. Nowadays, most of them are third-generation, DDR3. As long as they are the same generation of memory, it doesn’t matter what brand it is. As for the size, as long as it does not exceed the maximum supported memory size of the motherboard.

Third: The choice of graphics card also depends on the slot. It depends on which graphics card slots your motherboard supports. You can choose the graphics card among these slots. Most of the current motherboards Almost all of them can support more than 99% of graphics cards.

Fourth: Selection of power supply. There are many models of power supply still on sale, mainly ATX, BTX, and dual. There is not much difference between the two power supplies. The only difference is that Its arch power socket is a little different, so you have to decide what kind of power supply to buy based on your hardware. Most of them are BTX type now. At the same time, in addition to the socket, the power supply has another important point. The most important thing is that you bought the wrong socket. You can buy an adapter cable to adapt it. However, if the power is not enough, then the power supply is useless. Calculate all the hardware you need and see how much the total power is. It is usually more than this A power supply with a total power of 20% larger is suitable. If it is too big, it will consume electricity. If it is too small, of course it cannot be carried.

Fifth: Selection of other hardware. For other hardware, you only need to choose according to the socket on the motherboard. If it can be plugged in, it will definitely work. There are a few things you need to be careful about when installing your own computer. Here is a little reminder. First of all, you must be very careful when installing the CPU. Make sure it is vertically up and down. The pins in the CPU slot on the motherboard are very fragile. Even bending one is troublesome.

Secondly, there is the graphics card. Most graphics cards now have dual 6P power supplies, and most power supplies now only provide one 6P power cord. This requires an adapter cable. When you configure your own computer, When buying a power supply or graphics card, be sure to remember to get this cable, otherwise the graphics card will not be able to supply power.

The above is the detailed content of Will there be any incompatibility when assembling a computer?. For more information, please follow other related articles on the PHP Chinese website!