PHP Composer 安装与使用-php手册-php.cn

PHP Composer 安装与使用

WBOY

Release： 2016-06-06 20:09:01

Original

1600 people have browsed it

Composer 是 PHP 中用来管理依赖(dependency)关系的工具。你可以在自己的项目中声明所依赖的外部工具库( libraries )， Composer 会帮你安装这些依赖的库文件。 PHP Composer 安装系统需求： Composer 需要PHP5.3.2+ 以上的环境来运行。有几个敏感的PHP设置

Composer 是PHP中用来管理依赖(dependency)关系的工具。你可以在自己的项目中声明所依赖的外部工具库(libraries)，Composer会帮你安装这些依赖的库文件。

PHP Composer 是PHP中用来管理依赖(dependency)关系的工具。

PHP Composer 安装

系统需求：

Composer 需要PHP5.3.2+ 以上的环境来运行。有几个敏感的PHP设置和编译标志也是必需的，但安装程序会发出警告当存在任何不兼容的情况。

比如PHP的扩展的要求是，安装或重新编译php without –disable-phar

为了从源地址安装软件包，而不是简单的压缩文件包，您将需要安装软件包的版本控制工具，比如git、svn或hg等。

Composer 是兼容多平台的，其运行适用于Windows，Linux和OSX。

安装失败的错误消息：

curl -sS https://getcomposer.org/installer | PHP
#!/usr/bin/env php
some settings on your machine make Composer unable to work properly.
Make sure that you fix the issues listed below and run this script again:

The phar extension is missing.
Install it or recompile php without –disable-phar

Your PHP (5.2.9) is too old, you must upgrade to PHP 5.3.2 or higher.

我的本地默认开发环境是PHP 5.2.9，当我尝试在PHP 5.2.9上安装时，提示版本过低，需要升级到PHP 5.3.2 或者更高的版本。

于是我下载XAMPP 1.7.7 usb lite 版本。

E:\USB\Dropbox\phpstorm\php53>E:\USB\xampp_177\php\php.exe -v
PHP 5.3.8 (cli) (built: Aug 23 2011 11:50:20)
Copyright (c) 1997-2011 The PHP Group
Zend Engine v2.3.0, Copyright (c) 1998-2011 Zend Technologies

XAMPP 1.7.7 下的PHP环境是5.3.8。确认我的PHP环境大于等于PHP5.3.2后。

PHP 5.3 安装 Composer

E:\USB\Dropbox\phpstorm\php53>curl -sS https://getcomposer.org/installer | E:\USB\xampp_177\php\php.exe
#!/usr/bin/env php
Some settings on your machine may cause stability issues with Composer.
If you encounter issues, try to change the following:

The openssl extension is missing, which will reduce the security and stability o
f Composer.
If possible you should enable it or recompile php with –with-openssl

Downloading…

Composer successfully installed to: E:\USB\Dropbox\phpstorm\php53\composer.phar
Use it: php composer.phar

注意：

我关闭了XAMPP 1.7.7 Apache的SSL模块，所以Composer提示我警告，为了安全因素建议我开启SSL模块。不开启也不影响使用。
安装时的参数 | PHP，一定要更改为真实的PHP环境路径，比如 | E:\USB\xampp_177\php\php.exe
使用Composer为PHP路径 + 命令，在我们安装的环境中，使用方法为：E:\USB\xampp_177\php/php.exe composer.phar 命令。
我安装的环境是在Windows下，如果在Linux下，而PHP 5.3 环境也不在默认PHP命令下时，应该采用 | /usr/php/53/usr/bin/php，例如：

curl -sS https://getcomposer.org/installer | /usr/php/53/usr/bin/php

安装完成后，检查安装版本。

E:\USB\Dropbox\phpstorm\php53>E:\USB\xampp_177\php/php.exe composer.phar -V
Composer version 0209bd31a0ac3aeb2a68fc81e2d03c71072bef33

检查PHP Composer命令：

E:\USB\Dropbox\phpstorm\php53>E:\USB\xampp_177\php/php.exe composer.phar
   ______
/ ____/___ ____ ___ ____ ____ ________ _____
/ /   / __ \/ __ `__ \/ __ \/ __ \/ ___/ _ \/ ___/
/ /___/ /_/ / / / / / / /_/ / /_/ (__ ) __/ /
\____/\____/_/ /_/ /_/ .___/\____/____/\___/_/
                    /_/
Composer version 0209bd31a0ac3aeb2a68fc81e2d03c71072bef33

Usage:
[options] command [arguments]

Options:
–help           -h Display this help message.
–quiet          -q Do not output any message.
–verbose        -v Increase verbosity of messages.
–version        -V Display this application version.
–ansi              Force ANSI output.
–no-ansi           Disable ANSI output.
–no-interaction -n Do not ask any interactive question.
–profile           Display timing and memory usage information
–working-dir    -d If specified, use the given directory as working directory
.

Available commands:
about            Short information about Composer
archive          Create an archive of this composer package
config           Set config options
create-project   Create new project from a package into given directory.
depends          Shows which packages depend on the given package
diagnose         Diagnoses the system to identify common errors.
dump-autoload    Dumps the autoloader
dumpautoload     Dumps the autoloader
help             Displays help for a command
init             Creates a basic composer.json file in current directory.
install          Installs the project dependencies from the composer.lock file
if present, or falls back on the composer.json.
list             Lists commands
require          Adds required packages to your composer.json and installs the
m
run-script       Run the scripts defined in composer.json.
search           Search for packages
self-update      Updates composer.phar to the latest version.
selfupdate       Updates composer.phar to the latest version.
show             Show information about packages
status           Show a list of locally modified packages
update           Updates your dependencies to the latest version according to
composer.json, and updates the composer.lock file.
validate         Validates a composer.json