Oracle Database 11g Release 1 (11.1) Installation On Fedora

WBOY

Libérer： 2016-06-07 15:39:12

original

1175 Les gens l'ont consulté

Oracle Database 11g Release 1 (11.1) Installation On Fedora 8 (F8) This article describes the installation of Oracle Database 11g Release 1 (11.1) on Fedora 8 (F8) . The article is based on a server installation with a minimum of 2G swap,

Oracle Database 11g Release 1 (11.1) Installation On Fedora 8 (F8)

This article describes the installation of Oracle Database 11g Release 1 (11.1) on Fedora 8 (F8). The article is based on a server installation with a minimum of 2G swap, secure Linux disabled and the following package groups installed:

GNOME Desktop Environment
Editors
Graphical Internet
Development Libraries
Development Tools
Server Configuration Tools
Administration Tools
Base
Fonts
Legacy Fonts
Hardware Support
System Tools
X Window System

An example of this type of Linux installation can be seen here. Alternative installations may require more packages to be loaded, in addition to the ones listed below.

Download Software
Unpack Files
Hosts File
Set Kernel Parameters
Setup
Installation
Post Installation

Download Software

Download the following software:

Oracle Database 11g Release 1 (11.1) Software

Unpack Files

Unzip the files:

unzip linux_11gR1_database.zip
Copier après la connexion

You should now have a single directory called "database" containing installation files.

Hosts File

The /etc/hosts file must contain a fully qualified name for the server:

<ip-address>  <fully-qualified-machine-name>  <machine-name></machine-name></fully-qualified-machine-name></ip-address>

Copier après la connexion

Set Kernel Parameters

Oracle recommend the following minimum parameter settings:

kernel.shmall = 2097152
kernel.shmmax = 2147483648 # Smallest of -> (Half the size of the physical memory) or (4GB - 1 byte)
kernel.shmmni = 4096
# semaphores: semmsl, semmns, semopm, semmni
kernel.sem = 250 32000 100 128
fs.file-max = 65536 # 512 * PROCESSES
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default=4194304
net.core.rmem_max=4194304
net.core.wmem_default=262144
net.core.wmem_max=262144

Copier après la connexion

The current values can be tested using the following command:

/sbin/sysctl -a | grep <param-name></param-name>
Copier après la connexion

For Fedora 8, the following lines should be appended to the "/etc/sysctl.conf" file.

kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
# semaphores: semmsl, semmns, semopm, semmni
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default=4194304
net.core.rmem_max=4194304
net.core.wmem_default=262144
net.core.wmem_max=262144

Copier après la connexion

Run the following command to change the current kernel parameters:

/sbin/sysctl -p
Copier après la connexion

Add the following lines to the /etc/security/limits.conf file:

oracle              soft    nproc   2047
oracle              hard    nproc   16384
oracle              soft    nofile  1024
oracle              hard    nofile  65536

Copier après la connexion

Add the following line to the /etc/pam.d/login file, if it does not already exist:

session    required     /lib/security/pam_limits.so
session    required     pam_limits.so

Copier après la connexion

Disable secure linux by editing the /etc/selinux/config file, making sure the SELINUX flag is set as follows:

SELINUX=disabled
Copier après la connexion

Alternatively, this alteration can be done using the GUI tool (System > Administration > Firewall and SELinux). Click on the SELinux tab and disable the feature.

Setup

Install the following packages:

# From Fedora 8 DVD
cd /media/cdrom/Packages
rpm -Uvh binutils-2.*
rpm -Uvh elfutils-libelf-0.*
rpm -Uvh glibc-2.*
rpm -Uvh glibc-common-2.*
rpm -Uvh libgcc-4.*
rpm -Uvh libstdc++-4.*
rpm -Uvh make-3.*
rpm -Uvh elfutils-libelf-devel-0.*
rpm -Uvh glibc-devel-2.*
rpm -Uvh gcc-4.*
rpm -Uvh gcc-c++-4.*
rpm -Uvh libstdc++-devel-4.*
rpm -Uvh unixODBC-2.*
cd /
eject

# Not available on Fedora 8 DVD, but available from standard yum repository.
yum install libaio libaio-devel
yum install unixODBC-devel
yum install sysstat
yum install compat-libstdc++

# Required to mask Java conflict (thanks to Robert W. Benton for pointing this out)
yum --enablerepo=development install libxcb.i386

Copier après la connexion

Create the new groups and users:

groupadd oinstall
groupadd dba
groupadd oper
groupadd asmadmin

useradd -g oinstall -G dba,oper,asmadmin oracle
passwd oracle

Copier après la connexion

Note. We are not going to use th "asmadmin" group, since this installation will not use ASM.

Create the directories in which the Oracle software will be installed:

mkdir -p /u01/app/oracle/product/11.1.0/db_1
chown -R oracle:oinstall /u01
chmod -R 775 /u01

Copier après la connexion

xhost +<machine-name></machine-name>
Copier après la connexion

Edit the /etc/redhat-release file replacing the current release information (Fedora release 8 (Werewolf)) with the following:

redhat release 5
Copier après la connexion

# Oracle Settings
TMP=/tmp; export TMP
TMPDIR=$TMP; export TMPDIR

ORACLE_HOSTNAME=f8.localdomain; export ORACLE_HOSTNAME
ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/product/11.1.0/db_1; export ORACLE_HOME
ORACLE_SID=DB11G; export ORACLE_SID
ORACLE_TERM=xterm; export ORACLE_TERM
PATH=/usr/sbin:$PATH; export PATH
PATH=$ORACLE_HOME/bin:$PATH; export PATH

LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH
CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export CLASSPATH

if [ $USER = "oracle" ]; then
  if [ $SHELL = "/bin/ksh" ]; then
    ulimit -p 16384
    ulimit -n 65536
  else
    ulimit -u 16384 -n 65536
  fi
fi

# Required to mask Java conflict (thanks to Robert W. Benton for pointing this out)
LIBXCB_ALLOW_SLOPPY_LOCK=true; export LIBXCB_ALLOW_SLOPPY_LOCK

Copier après la connexion

Installation

Log into the oracle user. If you are using X emulation then set the DISPLAY environmental variable:

DISPLAY=<machine-name>:0.0; export DISPLAY</machine-name>
Copier après la connexion

Start the Oracle Universal Installer (OUI) by issuing the following command in the database directory:

./runInstaller
Copier après la connexion

During the installation enter the appropriate ORACLE_HOME and name then continue installation. Some of the prerequisite checks will not complete due to this not being a supported Linux distribution. Check each of these prerequisites to set them to "User Verified" then you can proceed. For a more detailed look at the installation process, click on the links below to see screen shots of each stage.