©
Ce document utilise Manuel du site Web PHP chinois Libérer
(PHP 4 >= 4.0.2, PHP 5)
mcrypt_module_open — 打开算法和模式对应的模块
$algorithm
, string $algorithm_directory
, string $mode
, string $mode_directory
)
本函数打开指定算法和模式对应的模块。
算法名称可以是字符串,例如 "twofish",
也可以是 MCRYPT_ciphername
常量。
调用 mcrypt_module_close() 函数可以关闭模块。
algorithm
MCRYPT_ciphername
常量中的一个,或者是字符串值的算法名称。
algorithm_directory
algorithm_directory
参数指示加密模块的位置。
如果你提供此参数,则使用你指定的值。
如果将此参数设置为空字符串(""),将使用
php.ini 中的 mcrypt.algorithms_dir 。
如果不指定此参数,则使用 libmcrypt 的编译路径
(通常是 /usr/local/lib/libmcrypt)。
mode
MCRYPT_MODE_modename
常量中的一个,或以下字符串中的一个:"ecb","cbc","cfb","ofb","nofb" 和 "stream"。
mode_directory
algorithm_directory
参数指示加密模式的位置。
如果你提供此参数,则使用你指定的值。
如果将此参数设置为空字符串(""),将使用
php.ini 中的 mcrypt.modes_dir 。
如果不指定此参数,则使用 libmcrypt 的编译路径
(通常是 /usr/local/lib/libmcrypt)。
成功则返回加密描述符,如果发生错误则返回 FALSE
。
Example #1 mcrypt_module_open() 例程
<?php
$td = mcrypt_module_open ( MCRYPT_DES , '' ,
MCRYPT_MODE_ECB , '/usr/lib/mcrypt-modes' );
$td = mcrypt_module_open ( 'rijndael-256' , '' , 'ofb' , '' );
?>
例程中的第一行从默认目录打开 DES 加密算法, 从 /usr/lib/mcrypt-modes 目录打开 ECB 模式。 第二个示例中,使用字符串形式表示算法和模式, 这种形式仅适用于 libmcrypt 2.4.x 或 2.5.x 版本。
Example #2 在加密中使用 mcrypt_module_open()
<?php
$td = mcrypt_module_open ( 'rijndael-256' , '' , 'ofb' , '' );
$iv = mcrypt_create_iv ( mcrypt_enc_get_iv_size ( $td ), MCRYPT_DEV_RANDOM );
$ks = mcrypt_enc_get_key_size ( $td );
$key = substr ( md5 ( 'very secret key' ), 0 , $ks );
mcrypt_generic_init ( $td , $key , $iv );
$encrypted = mcrypt_generic ( $td , 'This is very important data' );
mcrypt_generic_deinit ( $td );
mcrypt_generic_init ( $td , $key , $iv );
$decrypted = mdecrypt_generic ( $td , $encrypted );
mcrypt_generic_deinit ( $td );
mcrypt_module_close ( $td );
echo trim ( $decrypted ) . "\n" ;
?>
[#1] Mark [2012-10-29 14:11:23]
for errors like
' mcrypt_module_open(): Could not open encryption module in '
Make sure you're using the right name. The page giving the list of ciphers is NOT the right way to say each cipher (shown here http://www.php.net/manual/en/mcrypt.ciphers.php).
In order to see what ones are supported, try phpinfo(); and look under mcrypt to find something like this
mcrypt support => enabled
mcrypt_filter support => enabled
Version => 2.5.8
Api No => 20021217
Supported ciphers => cast-128 gost rijndael-128 twofish arcfour cast-256 loki97 rijndael-192 saferplus wake blowfish-compat des rijndael-256
serpent xtea blowfish enigma rc2 tripledes
Supported modes => cbc cfb ctr ecb ncfb nofb ofb stream
[#2] lehmann*at*arcor-so.net [2009-07-20 08:10:18]
Keep in mind that the mcrypt functions do not implement padding like e.g. pkcs#5. This causes the problem with zero bytes at the end and the sting cannot be correctly decoded in other environments.
For an example how to add pkcs 5 padding, see ref.mcrypt.php
[#3] royconejo [2009-03-29 21:01:47]
about the previous comments on hex formatting and capitalization as a way to improve the key:
this would seem pretty obvious, but it is a choice to be limited to only hex characters ([0-9a-z]); you can get the original RAW output from md5() or sha1() and not the default readable hex formatting.
the result of a raw output will be 16 o 20 (depending on the hash function being used) series of chars in the range 0-255. way better than [0-9a-z] and even [0-9a-zA-Z].
16 or 20 is generally lower than the maximum key lenght ($ks in the example), but you can append two or more keys together:
<?php
$human_key1 = 'something very secret';
$human_key2 = 'something else very secret';
// 40 bytes binary key using two "human readable" keys and sha1.
$bigger_binary_key = sha1($human_key1, true) . sha1($human_key2, true);
// then just use it as you would (extract taken from the example)
$key = substr($bigger_binary_key, 0, $ks);
?>
... or you can automatically split one large "human key" into two or more parts, hash those parts with sha1 (raw output!) and merge them together again (in original order or rearrange, salt, transform them as you like) to get a binary key of 40, 60, 80 or more chars depending on the number of parts the secret key has been splitted =)
[#4] ash [2008-07-17 03:07:53]
A slight improvement of dinamic's function to create a key:
I think the weak point is that capitals are always used in the same part of the string. The following code capitalizes random characters of the string, making the key less predictable:
<?php
$key = substr($key1, 0, $ks/2) . substr($key2, (round(strlen($key2) / 2)), $ks/2);
$key = substr($key.$key1.$key2.$key1,0,$ks);
$buffer = str_split($key);
$limit = count($buffer)-1;
srand((float)microtime() * 1000000);
$end = rand(0, $limit);
$a = 0;
// replace random chars with capitals
while ($a < $end) {
list($usec, $sec) = explode(' ', microtime());
$seed = ((float)$sec) + ((float) $usec * 100000);
mt_srand($seed);
$index = mt_rand(0,$limit);
$buffer[$index] = strtoupper($buffer[$index]);
$a++;
}
$key = join('', $buffer);
?>
[#5] dinamic at gmail dot com [2007-11-13 03:05:45]
Also it should be pointed that md5() and/or sha1() should not be used while forming your key for the mcrypt. This is so because hex encoding uses a set of only 16 characters [0-9a-f], which is equivalent to 4 bits, and thus halve the strength of your encryption: 4 x 32 = 128-bit.
I have re-wrote the example shown, so here is my suggestion to get real 256-bit encryption:
<?php
$key1 = "this is a secret key";
$key2 = "this is the second secret key";
$input = "Let us meet at 9 o'clock at the secret place.";
$length = strlen($input);
$td = mcrypt_module_open('rijndael-256', '', 'cbc', '');
$iv = mcrypt_create_iv(mcrypt_enc_get_iv_size($td), MCRYPT_RAND);
$ks = mcrypt_enc_get_key_size($td);
$key1 = md5($key1);
$key2 = md5($key2);
$key = substr($key1, 0, $ks/2) . substr(strtoupper($key2), (round(strlen($key2) / 2)), $ks/2);
$key = substr($key.$key1.$key2.strtoupper($key1),0,$ks);
mcrypt_generic_init($td, $key, $iv);
$encrypted = mcrypt_generic($td, $input);
mcrypt_generic_deinit($td);
mcrypt_generic_init($td, $key, $iv);
$decrypted = mdecrypt_generic($td, $encrypted);
mcrypt_generic_deinit($td);
mcrypt_module_close($td);
echo "Text: ".substr($decrypted,0,$length) . "<br>";
echo "Encoded: ".$encrypted ."<br>";
echo "<br>key1: $key1 <br>key2: $key2<br>created key: $key";
?>
[#6] [2003-07-31 20:14:51]
Doing a trim($decrypted) will remove the null padding that may occur as a result of decryption.
The problem is if you're encrypting something like a MSWord document which can commonly end with nulls. The result $decrypted will be smaller than the original cleartext - which will then fail to open in MSOffice.
To get around this, make sure you store the length of the original cleartext, and when you decrypt it, do:
$decrypted = substr(mdecrypt_generic($td, $encrypted), 0, $originalLength);