コミュニティ
学ぶ
ツールライブラリ
AIツール
レジャー
検索
日本語
目次
回复内容：
ホームページ バックエンド開発 PHPチュートリアル MAC上vhosts后You don't have permission to access / on this server.

MAC上vhosts后You don't have permission to access / on this server.

WBOYWBOYWBOYWBOYWBOYWBOYWBOYWBOYWBOYWBOYWBOYWBOYWB
WBOYWBOYWBOYWBOYWBOYWBOYWBOYWBOYWBOYWBOYWBOYWBOYWB
Jun 06, 2016 pm 08:19 PM
apache php

网上的方法都试了，各种不行~

httpd.conf:

<code>#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <http:></http:> for detailed information.
# In particular, see 
# <http:>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" 
# will be interpreted as '/logs/access_log'.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used.  If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
#
ServerRoot "/usr"

#
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
#
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
#
# Mutex default:/private/var/run

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <virtualhost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule authn_file_module libexec/apache2/mod_authn_file.so
#LoadModule authn_dbm_module libexec/apache2/mod_authn_dbm.so
#LoadModule authn_anon_module libexec/apache2/mod_authn_anon.so
#LoadModule authn_dbd_module libexec/apache2/mod_authn_dbd.so
#LoadModule authn_socache_module libexec/apache2/mod_authn_socache.so
LoadModule authn_core_module libexec/apache2/mod_authn_core.so
LoadModule authz_host_module libexec/apache2/mod_authz_host.so
LoadModule authz_groupfile_module libexec/apache2/mod_authz_groupfile.so
LoadModule authz_user_module libexec/apache2/mod_authz_user.so
#LoadModule authz_dbm_module libexec/apache2/mod_authz_dbm.so
#LoadModule authz_owner_module libexec/apache2/mod_authz_owner.so
#LoadModule authz_dbd_module libexec/apache2/mod_authz_dbd.so
LoadModule authz_core_module libexec/apache2/mod_authz_core.so
#LoadModule authnz_ldap_module libexec/apache2/mod_authnz_ldap.so
LoadModule access_compat_module libexec/apache2/mod_access_compat.so
LoadModule auth_basic_module libexec/apache2/mod_auth_basic.so
#LoadModule auth_form_module libexec/apache2/mod_auth_form.so
#LoadModule auth_digest_module libexec/apache2/mod_auth_digest.so
#LoadModule allowmethods_module libexec/apache2/mod_allowmethods.so
#LoadModule file_cache_module libexec/apache2/mod_file_cache.so
#LoadModule cache_module libexec/apache2/mod_cache.so
#LoadModule cache_disk_module libexec/apache2/mod_cache_disk.so
#LoadModule cache_socache_module libexec/apache2/mod_cache_socache.so
#LoadModule socache_shmcb_module libexec/apache2/mod_socache_shmcb.so
#LoadModule socache_dbm_module libexec/apache2/mod_socache_dbm.so
#LoadModule socache_memcache_module libexec/apache2/mod_socache_memcache.so
#LoadModule watchdog_module libexec/apache2/mod_watchdog.so
#LoadModule macro_module libexec/apache2/mod_macro.so
#LoadModule dbd_module libexec/apache2/mod_dbd.so
#LoadModule dumpio_module libexec/apache2/mod_dumpio.so
#LoadModule echo_module libexec/apache2/mod_echo.so
#LoadModule buffer_module libexec/apache2/mod_buffer.so
#LoadModule data_module libexec/apache2/mod_data.so
#LoadModule ratelimit_module libexec/apache2/mod_ratelimit.so
LoadModule reqtimeout_module libexec/apache2/mod_reqtimeout.so
#LoadModule ext_filter_module libexec/apache2/mod_ext_filter.so
#LoadModule request_module libexec/apache2/mod_request.so
#LoadModule include_module libexec/apache2/mod_include.so
LoadModule filter_module libexec/apache2/mod_filter.so
#LoadModule reflector_module libexec/apache2/mod_reflector.so
#LoadModule substitute_module libexec/apache2/mod_substitute.so
#LoadModule sed_module libexec/apache2/mod_sed.so
#LoadModule charset_lite_module libexec/apache2/mod_charset_lite.so
#LoadModule deflate_module libexec/apache2/mod_deflate.so
#LoadModule xml2enc_module libexec/apache2/mod_xml2enc.so
#LoadModule proxy_html_module libexec/apache2/mod_proxy_html.so
LoadModule mime_module libexec/apache2/mod_mime.so
#LoadModule ldap_module libexec/apache2/mod_ldap.so
LoadModule log_config_module libexec/apache2/mod_log_config.so
#LoadModule log_debug_module libexec/apache2/mod_log_debug.so
#LoadModule log_forensic_module libexec/apache2/mod_log_forensic.so
#LoadModule logio_module libexec/apache2/mod_logio.so
LoadModule env_module libexec/apache2/mod_env.so
#LoadModule mime_magic_module libexec/apache2/mod_mime_magic.so
#LoadModule expires_module libexec/apache2/mod_expires.so
LoadModule headers_module libexec/apache2/mod_headers.so
#LoadModule usertrack_module libexec/apache2/mod_usertrack.so
##LoadModule unique_id_module libexec/apache2/mod_unique_id.so
LoadModule setenvif_module libexec/apache2/mod_setenvif.so
LoadModule version_module libexec/apache2/mod_version.so
#LoadModule remoteip_module libexec/apache2/mod_remoteip.so
LoadModule proxy_module libexec/apache2/mod_proxy.so
LoadModule proxy_connect_module libexec/apache2/mod_proxy_connect.so
LoadModule proxy_ftp_module libexec/apache2/mod_proxy_ftp.so
LoadModule proxy_http_module libexec/apache2/mod_proxy_http.so
LoadModule proxy_fcgi_module libexec/apache2/mod_proxy_fcgi.so
LoadModule proxy_scgi_module libexec/apache2/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module libexec/apache2/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module libexec/apache2/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module libexec/apache2/mod_proxy_ajp.so
LoadModule proxy_balancer_module libexec/apache2/mod_proxy_balancer.so
LoadModule proxy_express_module libexec/apache2/mod_proxy_express.so
#LoadModule session_module libexec/apache2/mod_session.so
#LoadModule session_cookie_module libexec/apache2/mod_session_cookie.so
#LoadModule session_dbd_module libexec/apache2/mod_session_dbd.so
LoadModule slotmem_shm_module libexec/apache2/mod_slotmem_shm.so
#LoadModule slotmem_plain_module libexec/apache2/mod_slotmem_plain.so
#LoadModule ssl_module libexec/apache2/mod_ssl.so
#LoadModule dialup_module libexec/apache2/mod_dialup.so
LoadModule lbmethod_byrequests_module libexec/apache2/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module libexec/apache2/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module libexec/apache2/mod_lbmethod_bybusyness.so
#LoadModule lbmethod_heartbeat_module libexec/apache2/mod_lbmethod_heartbeat.so
LoadModule unixd_module libexec/apache2/mod_unixd.so
#LoadModule heartbeat_module libexec/apache2/mod_heartbeat.so
#LoadModule heartmonitor_module libexec/apache2/mod_heartmonitor.so
#LoadModule dav_module libexec/apache2/mod_dav.so
LoadModule status_module libexec/apache2/mod_status.so
LoadModule autoindex_module libexec/apache2/mod_autoindex.so
#LoadModule asis_module libexec/apache2/mod_asis.so
#LoadModule info_module libexec/apache2/mod_info.so
#LoadModule cgi_module libexec/apache2/mod_cgi.so
#LoadModule dav_fs_module libexec/apache2/mod_dav_fs.so
#LoadModule dav_lock_module libexec/apache2/mod_dav_lock.so
#LoadModule vhost_alias_module libexec/apache2/mod_vhost_alias.so
LoadModule negotiation_module libexec/apache2/mod_negotiation.so
LoadModule dir_module libexec/apache2/mod_dir.so
#LoadModule imagemap_module libexec/apache2/mod_imagemap.so
#LoadModule actions_module libexec/apache2/mod_actions.so
#LoadModule speling_module libexec/apache2/mod_speling.so
#LoadModule userdir_module libexec/apache2/mod_userdir.so
LoadModule alias_module libexec/apache2/mod_alias.so
#LoadModule rewrite_module libexec/apache2/mod_rewrite.so
LoadModule php5_module libexec/apache2/libphp5.so
LoadModule hfs_apple_module libexec/apache2/mod_hfs_apple.so

<ifmodule unixd_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User _www
Group _www

</ifmodule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <virtualhost> definition.  These values also provide defaults for
# any <virtualhost> containers you may define later in the file.
#
# All of these directives may appear inside <virtualhost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin you@example.com

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName www.example.com:80

#
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other 
# <directory> blocks below.
#
<directory></directory>
    AllowOverride none
    Require all denied
</directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/Library/WebServer/Documents"
<directory>
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # for more information.
    #
    Options FollowSymLinks Multiviews
    MultiviewsMatch Any

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   AllowOverride FileInfo AuthConfig Limit
    #
    AllowOverride None

    #
    # Controls who can get stuff from this server.
    #
    Require all granted
</directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<ifmodule dir_module>
    DirectoryIndex index.html
    Options Indexes
</ifmodule>

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<filesmatch>
    Require all denied
</filesmatch>

#
# Apple specific filesystem protection.
#
<files>
    Require all denied
</files>
<directorymatch>
    Require all denied
</directorymatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <virtualhost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <virtualhost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "/private/var/log/apache2/error_log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<ifmodule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <ifmodule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </ifmodule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <virtualhost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<virtualhost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog "/private/var/log/apache2/access_log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog "/private/var/log/apache2/access_log" combined
</virtualhost></virtualhost></ifmodule>

<ifmodule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAliasMatch ^/cgi-bin/((?!(?i:webobjects)).*$) "/Library/WebServer/CGI-Executables/$1"

</directory></ifmodule>

<ifmodule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock cgisock
</ifmodule>

#
# "/Library/WebServer/CGI-Executables" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<directory>
    AllowOverride None
    Options None
    Require all granted
</directory>

<ifmodule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig /private/etc/apache2/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    #AddHandler cgi-script .cgi

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
</ifmodule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile /private/etc/apache2/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited

#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall may be used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#
#EnableMMAP off
#EnableSendfile on

TraceEnable off

# Supplemental configuration
#
# The configuration files in the /private/etc/apache2/extra/ directory can be 
# included to add extra features or to modify the default configuration of 
# the server, or you may simply copy their contents here and change as 
# necessary.

# Server-pool management (MPM specific)
Include /private/etc/apache2/extra/httpd-mpm.conf

# Multi-language error messages
#Include /private/etc/apache2/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
Include /private/etc/apache2/extra/httpd-autoindex.conf

# Language settings
#Include /private/etc/apache2/extra/httpd-languages.conf

# User home directories
#Include /private/etc/apache2/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include /private/etc/apache2/extra/httpd-info.conf

# Virtual hosts
Include /private/etc/apache2/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include /private/etc/apache2/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include /private/etc/apache2/extra/httpd-dav.conf

# Various default settings
#Include /private/etc/apache2/extra/httpd-default.conf

# Configure mod_proxy_html to understand HTML4/XHTML1
<ifmodule proxy_html_module>
Include /private/etc/apache2/extra/proxy-html.conf
</ifmodule>

# Secure (SSL/TLS) connections
#Include /private/etc/apache2/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<ifmodule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</ifmodule>

Include /private/etc/apache2/other/*.conf

#
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#
#<ifmodule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</ifmodule>
#<ifmodule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</ifmodule>
</virtualhost></virtualhost></virtualhost></virtualhost></virtualhost></virtualhost></http:></code>
ログイン後にコピー
ログイン後にコピー

httpd-vhost.conf:

<code># Virtual Hosts
#
# Required modules: mod_log_config

# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <http:></http:>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any <virtualhost> block.
#
#<virtualhost>
#    ServerAdmin webmaster@dummy-host.example.com
#    DocumentRoot "/usr/docs/dummy-host.example.com"
#    ServerName dummy-host.example.com
#    ServerAlias www.dummy-host.example.com
#    ErrorLog "/private/var/log/apache2/dummy-host.example.com-error_log"
#    CustomLog "/private/var/log/apache2/dummy-host.example.com-access_log" common
#</virtualhost>

#<virtualhost>
#    ServerAdmin webmaster@dummy-host2.example.com
#    DocumentRoot "/usr/docs/dummy-host2.example.com"
#    ServerName dummy-host2.example.com
#    ErrorLog "/private/var/log/apache2/dummy-host2.example.com-error_log"
#    CustomLog "/private/var/log/apache2/dummy-host2.example.com-access_log" common
#</virtualhost>

<virtualhost>
    DocumentRoot "/Library/WebServer/Documents"
    ServerName localhost
    ErrorLog "/private/var/log/apache2/localhost-error_log"
    CustomLog "/private/var/log/apache2/localhost-access_log" common
</virtualhost>

<virtualhost>
    DocumentRoot "/Users/YuanWing/Wing/Demo/Dialog"
    ServerName wing
    ErrorLog "/private/var/log/apache2/sites-error_log"
    CustomLog "/private/var/log/apache2/sites-access_log" common
    <directory>
        Options Indexes FollowSymLinks MultiViews
        AllowOverride None
        Order deny,allow
        Allow from all
    </directory>
</virtualhost></virtualhost></code>
ログイン後にコピー
ログイン後にコピー
<code>drwxr-xr-x  6 YuanWing  staff  204  1 18 23:39 Dialog</code>
ログイン後にコピー
ログイン後にコピー

hosts:

<code>  1 ##
  2 # Host Database
  3 #
  4 # localhost is used to configure the loopback interface
  5 # when the system is booting.  Do not change this entry.
  6 ##
  7 127.0.0.1 localhost
  8 255.255.255.255 broadcasthost
  9 ::1             localhost
 10 127.0.0.1 wing</code>
ログイン後にコピー
ログイン後にコピー

回复内容：

网上的方法都试了，各种不行~

httpd.conf:

<code>#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <http:></http:> for detailed information.
# In particular, see 
# <http:>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" 
# will be interpreted as '/logs/access_log'.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used.  If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
#
ServerRoot "/usr"

#
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
#
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
#
# Mutex default:/private/var/run

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <virtualhost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule authn_file_module libexec/apache2/mod_authn_file.so
#LoadModule authn_dbm_module libexec/apache2/mod_authn_dbm.so
#LoadModule authn_anon_module libexec/apache2/mod_authn_anon.so
#LoadModule authn_dbd_module libexec/apache2/mod_authn_dbd.so
#LoadModule authn_socache_module libexec/apache2/mod_authn_socache.so
LoadModule authn_core_module libexec/apache2/mod_authn_core.so
LoadModule authz_host_module libexec/apache2/mod_authz_host.so
LoadModule authz_groupfile_module libexec/apache2/mod_authz_groupfile.so
LoadModule authz_user_module libexec/apache2/mod_authz_user.so
#LoadModule authz_dbm_module libexec/apache2/mod_authz_dbm.so
#LoadModule authz_owner_module libexec/apache2/mod_authz_owner.so
#LoadModule authz_dbd_module libexec/apache2/mod_authz_dbd.so
LoadModule authz_core_module libexec/apache2/mod_authz_core.so
#LoadModule authnz_ldap_module libexec/apache2/mod_authnz_ldap.so
LoadModule access_compat_module libexec/apache2/mod_access_compat.so
LoadModule auth_basic_module libexec/apache2/mod_auth_basic.so
#LoadModule auth_form_module libexec/apache2/mod_auth_form.so
#LoadModule auth_digest_module libexec/apache2/mod_auth_digest.so
#LoadModule allowmethods_module libexec/apache2/mod_allowmethods.so
#LoadModule file_cache_module libexec/apache2/mod_file_cache.so
#LoadModule cache_module libexec/apache2/mod_cache.so
#LoadModule cache_disk_module libexec/apache2/mod_cache_disk.so
#LoadModule cache_socache_module libexec/apache2/mod_cache_socache.so
#LoadModule socache_shmcb_module libexec/apache2/mod_socache_shmcb.so
#LoadModule socache_dbm_module libexec/apache2/mod_socache_dbm.so
#LoadModule socache_memcache_module libexec/apache2/mod_socache_memcache.so
#LoadModule watchdog_module libexec/apache2/mod_watchdog.so
#LoadModule macro_module libexec/apache2/mod_macro.so
#LoadModule dbd_module libexec/apache2/mod_dbd.so
#LoadModule dumpio_module libexec/apache2/mod_dumpio.so
#LoadModule echo_module libexec/apache2/mod_echo.so
#LoadModule buffer_module libexec/apache2/mod_buffer.so
#LoadModule data_module libexec/apache2/mod_data.so
#LoadModule ratelimit_module libexec/apache2/mod_ratelimit.so
LoadModule reqtimeout_module libexec/apache2/mod_reqtimeout.so
#LoadModule ext_filter_module libexec/apache2/mod_ext_filter.so
#LoadModule request_module libexec/apache2/mod_request.so
#LoadModule include_module libexec/apache2/mod_include.so
LoadModule filter_module libexec/apache2/mod_filter.so
#LoadModule reflector_module libexec/apache2/mod_reflector.so
#LoadModule substitute_module libexec/apache2/mod_substitute.so
#LoadModule sed_module libexec/apache2/mod_sed.so
#LoadModule charset_lite_module libexec/apache2/mod_charset_lite.so
#LoadModule deflate_module libexec/apache2/mod_deflate.so
#LoadModule xml2enc_module libexec/apache2/mod_xml2enc.so
#LoadModule proxy_html_module libexec/apache2/mod_proxy_html.so
LoadModule mime_module libexec/apache2/mod_mime.so
#LoadModule ldap_module libexec/apache2/mod_ldap.so
LoadModule log_config_module libexec/apache2/mod_log_config.so
#LoadModule log_debug_module libexec/apache2/mod_log_debug.so
#LoadModule log_forensic_module libexec/apache2/mod_log_forensic.so
#LoadModule logio_module libexec/apache2/mod_logio.so
LoadModule env_module libexec/apache2/mod_env.so
#LoadModule mime_magic_module libexec/apache2/mod_mime_magic.so
#LoadModule expires_module libexec/apache2/mod_expires.so
LoadModule headers_module libexec/apache2/mod_headers.so
#LoadModule usertrack_module libexec/apache2/mod_usertrack.so
##LoadModule unique_id_module libexec/apache2/mod_unique_id.so
LoadModule setenvif_module libexec/apache2/mod_setenvif.so
LoadModule version_module libexec/apache2/mod_version.so
#LoadModule remoteip_module libexec/apache2/mod_remoteip.so
LoadModule proxy_module libexec/apache2/mod_proxy.so
LoadModule proxy_connect_module libexec/apache2/mod_proxy_connect.so
LoadModule proxy_ftp_module libexec/apache2/mod_proxy_ftp.so
LoadModule proxy_http_module libexec/apache2/mod_proxy_http.so
LoadModule proxy_fcgi_module libexec/apache2/mod_proxy_fcgi.so
LoadModule proxy_scgi_module libexec/apache2/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module libexec/apache2/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module libexec/apache2/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module libexec/apache2/mod_proxy_ajp.so
LoadModule proxy_balancer_module libexec/apache2/mod_proxy_balancer.so
LoadModule proxy_express_module libexec/apache2/mod_proxy_express.so
#LoadModule session_module libexec/apache2/mod_session.so
#LoadModule session_cookie_module libexec/apache2/mod_session_cookie.so
#LoadModule session_dbd_module libexec/apache2/mod_session_dbd.so
LoadModule slotmem_shm_module libexec/apache2/mod_slotmem_shm.so
#LoadModule slotmem_plain_module libexec/apache2/mod_slotmem_plain.so
#LoadModule ssl_module libexec/apache2/mod_ssl.so
#LoadModule dialup_module libexec/apache2/mod_dialup.so
LoadModule lbmethod_byrequests_module libexec/apache2/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module libexec/apache2/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module libexec/apache2/mod_lbmethod_bybusyness.so
#LoadModule lbmethod_heartbeat_module libexec/apache2/mod_lbmethod_heartbeat.so
LoadModule unixd_module libexec/apache2/mod_unixd.so
#LoadModule heartbeat_module libexec/apache2/mod_heartbeat.so
#LoadModule heartmonitor_module libexec/apache2/mod_heartmonitor.so
#LoadModule dav_module libexec/apache2/mod_dav.so
LoadModule status_module libexec/apache2/mod_status.so
LoadModule autoindex_module libexec/apache2/mod_autoindex.so
#LoadModule asis_module libexec/apache2/mod_asis.so
#LoadModule info_module libexec/apache2/mod_info.so
#LoadModule cgi_module libexec/apache2/mod_cgi.so
#LoadModule dav_fs_module libexec/apache2/mod_dav_fs.so
#LoadModule dav_lock_module libexec/apache2/mod_dav_lock.so
#LoadModule vhost_alias_module libexec/apache2/mod_vhost_alias.so
LoadModule negotiation_module libexec/apache2/mod_negotiation.so
LoadModule dir_module libexec/apache2/mod_dir.so
#LoadModule imagemap_module libexec/apache2/mod_imagemap.so
#LoadModule actions_module libexec/apache2/mod_actions.so
#LoadModule speling_module libexec/apache2/mod_speling.so
#LoadModule userdir_module libexec/apache2/mod_userdir.so
LoadModule alias_module libexec/apache2/mod_alias.so
#LoadModule rewrite_module libexec/apache2/mod_rewrite.so
LoadModule php5_module libexec/apache2/libphp5.so
LoadModule hfs_apple_module libexec/apache2/mod_hfs_apple.so

<ifmodule unixd_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User _www
Group _www

</ifmodule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <virtualhost> definition.  These values also provide defaults for
# any <virtualhost> containers you may define later in the file.
#
# All of these directives may appear inside <virtualhost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin you@example.com

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName www.example.com:80

#
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other 
# <directory> blocks below.
#
<directory></directory>
    AllowOverride none
    Require all denied
</directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/Library/WebServer/Documents"
<directory>
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # for more information.
    #
    Options FollowSymLinks Multiviews
    MultiviewsMatch Any

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   AllowOverride FileInfo AuthConfig Limit
    #
    AllowOverride None

    #
    # Controls who can get stuff from this server.
    #
    Require all granted
</directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<ifmodule dir_module>
    DirectoryIndex index.html
    Options Indexes
</ifmodule>

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<filesmatch>
    Require all denied
</filesmatch>

#
# Apple specific filesystem protection.
#
<files>
    Require all denied
</files>
<directorymatch>
    Require all denied
</directorymatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <virtualhost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <virtualhost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "/private/var/log/apache2/error_log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<ifmodule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <ifmodule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </ifmodule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <virtualhost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<virtualhost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog "/private/var/log/apache2/access_log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog "/private/var/log/apache2/access_log" combined
</virtualhost></virtualhost></ifmodule>

<ifmodule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAliasMatch ^/cgi-bin/((?!(?i:webobjects)).*$) "/Library/WebServer/CGI-Executables/$1"

</directory></ifmodule>

<ifmodule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock cgisock
</ifmodule>

#
# "/Library/WebServer/CGI-Executables" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<directory>
    AllowOverride None
    Options None
    Require all granted
</directory>

<ifmodule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig /private/etc/apache2/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    #AddHandler cgi-script .cgi

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
</ifmodule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile /private/etc/apache2/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited

#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall may be used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#
#EnableMMAP off
#EnableSendfile on

TraceEnable off

# Supplemental configuration
#
# The configuration files in the /private/etc/apache2/extra/ directory can be 
# included to add extra features or to modify the default configuration of 
# the server, or you may simply copy their contents here and change as 
# necessary.

# Server-pool management (MPM specific)
Include /private/etc/apache2/extra/httpd-mpm.conf

# Multi-language error messages
#Include /private/etc/apache2/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
Include /private/etc/apache2/extra/httpd-autoindex.conf

# Language settings
#Include /private/etc/apache2/extra/httpd-languages.conf

# User home directories
#Include /private/etc/apache2/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include /private/etc/apache2/extra/httpd-info.conf

# Virtual hosts
Include /private/etc/apache2/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include /private/etc/apache2/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include /private/etc/apache2/extra/httpd-dav.conf

# Various default settings
#Include /private/etc/apache2/extra/httpd-default.conf

# Configure mod_proxy_html to understand HTML4/XHTML1
<ifmodule proxy_html_module>
Include /private/etc/apache2/extra/proxy-html.conf
</ifmodule>

# Secure (SSL/TLS) connections
#Include /private/etc/apache2/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<ifmodule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</ifmodule>

Include /private/etc/apache2/other/*.conf

#
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#
#<ifmodule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</ifmodule>
#<ifmodule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</ifmodule>
</virtualhost></virtualhost></virtualhost></virtualhost></virtualhost></virtualhost></http:></code>
ログイン後にコピー
ログイン後にコピー

httpd-vhost.conf:

<code># Virtual Hosts
#
# Required modules: mod_log_config

# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <http:></http:>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any <virtualhost> block.
#
#<virtualhost>
#    ServerAdmin webmaster@dummy-host.example.com
#    DocumentRoot "/usr/docs/dummy-host.example.com"
#    ServerName dummy-host.example.com
#    ServerAlias www.dummy-host.example.com
#    ErrorLog "/private/var/log/apache2/dummy-host.example.com-error_log"
#    CustomLog "/private/var/log/apache2/dummy-host.example.com-access_log" common
#</virtualhost>

#<virtualhost>
#    ServerAdmin webmaster@dummy-host2.example.com
#    DocumentRoot "/usr/docs/dummy-host2.example.com"
#    ServerName dummy-host2.example.com
#    ErrorLog "/private/var/log/apache2/dummy-host2.example.com-error_log"
#    CustomLog "/private/var/log/apache2/dummy-host2.example.com-access_log" common
#</virtualhost>

<virtualhost>
    DocumentRoot "/Library/WebServer/Documents"
    ServerName localhost
    ErrorLog "/private/var/log/apache2/localhost-error_log"
    CustomLog "/private/var/log/apache2/localhost-access_log" common
</virtualhost>

<virtualhost>
    DocumentRoot "/Users/YuanWing/Wing/Demo/Dialog"
    ServerName wing
    ErrorLog "/private/var/log/apache2/sites-error_log"
    CustomLog "/private/var/log/apache2/sites-access_log" common
    <directory>
        Options Indexes FollowSymLinks MultiViews
        AllowOverride None
        Order deny,allow
        Allow from all
    </directory>
</virtualhost></virtualhost></code>
ログイン後にコピー
ログイン後にコピー
<code>drwxr-xr-x  6 YuanWing  staff  204  1 18 23:39 Dialog</code>
ログイン後にコピー
ログイン後にコピー

hosts:

<code>  1 ##
  2 # Host Database
  3 #
  4 # localhost is used to configure the loopback interface
  5 # when the system is booting.  Do not change this entry.
  6 ##
  7 127.0.0.1 localhost
  8 255.255.255.255 broadcasthost
  9 ::1             localhost
 10 127.0.0.1 wing</code>
ログイン後にコピー
ログイン後にコピー

首先你要理解apache运行的用户身份，在配置里面看如下

<code><ifmodule unixd_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User _www
Group _www
</ifmodule></code>
ログイン後にコピー

所以你应该将你的程序运行目录设置为_www

<code>chown -R _www:_www Dialog</code>
ログイン後にコピー

将这里修改了一下可以了

<code><directory></directory>
    AllowOverride none
    Require all denied
</code>
ログイン後にコピー

修改后

<code><directory></directory>  
    Options Indexes FollowSymLinks  
    AllowOverride None  
</code>
ログイン後にコピー
このウェブサイトの声明
この記事の内容はネチズンが自主的に寄稿したものであり、著作権は原著者に帰属します。このサイトは、それに相当する法的責任を負いません。盗作または侵害の疑いのあるコンテンツを見つけた場合は、admin@php.cn までご連絡ください。

ホットAIツール

Undresser.AI Undress

Undresser.AI Undress

リアルなヌード写真を作成する AI 搭載アプリ

AI Clothes Remover

AI Clothes Remover

写真から衣服を削除するオンライン AI ツール。

Undress AI Tool

Undress AI Tool

脱衣画像を無料で

Clothoff.io

Clothoff.io

AI衣類リムーバー

AI Hentai Generator

AI Hentai Generator

AIヘンタイを無料で生成します。

もっと見る

人気の記事

R.E.P.O.説明されたエネルギー結晶と彼らが何をするか（黄色のクリスタル）
4週間前 By 尊渡假赌尊渡假赌尊渡假赌
R.E.P.O.最高のグラフィック設定
4週間前 By 尊渡假赌尊渡假赌尊渡假赌
アサシンのクリードシャドウズ：シーシェルリドルソリューション
2週間前 By DDD
R.E.P.O.誰も聞こえない場合はオーディオを修正する方法
4週間前 By 尊渡假赌尊渡假赌尊渡假赌
WWE 2K25：Myriseのすべてのロックを解除する方法
1 か月前 By 尊渡假赌尊渡假赌尊渡假赌
もっと見る

ホットツール

メモ帳++7.3.1

メモ帳++7.3.1

使いやすく無料のコードエディター

SublimeText3 中国語版

SublimeText3 中国語版

中国語版、とても使いやすい

ゼンドスタジオ 13.0.1

ゼンドスタジオ 13.0.1

強力な PHP 統合開発環境

ドリームウィーバー CS6

ドリームウィーバー CS6

ビジュアル Web 開発ツール

SublimeText3 Mac版

SublimeText3 Mac版

神レベルのコード編集ソフト（SublimeText3）

もっと見る

ホットトピック

Gmailメールのログイン入り口はどこですか？
7517
15
CakePHP チュートリアル
1378
52
Steamのアカウント名の形式は何ですか
79
11
Win11 Activation Key Permanent
53
19
NYTの接続はヒントと回答です
21
66
もっと見る
Related knowledge
PHPの現在のステータス：Web開発動向を見てください PHPの現在のステータス：Web開発動向を見てください Apr 13, 2025 am 12:20 AM

PHPは、現代のWeb開発、特にコンテンツ管理とeコマースプラットフォームで依然として重要です。 1）PHPには、LaravelやSymfonyなどの豊富なエコシステムと強力なフレームワークサポートがあります。 2）パフォーマンスの最適化は、Opcacheとnginxを通じて達成できます。 3）PHP8.0は、パフォーマンスを改善するためにJITコンパイラを導入します。 4）クラウドネイティブアプリケーションは、DockerおよびKubernetesを介して展開され、柔軟性とスケーラビリティを向上させます。

PHP：Web開発の重要な言語 PHP：Web開発の重要な言語 Apr 13, 2025 am 12:08 AM

PHPは、サーバー側で広く使用されているスクリプト言語で、特にWeb開発に適しています。 1.PHPは、HTMLを埋め込み、HTTP要求と応答を処理し、さまざまなデータベースをサポートできます。 2.PHPは、ダイナミックWebコンテンツ、プロセスフォームデータ、アクセスデータベースなどを生成するために使用され、強力なコミュニティサポートとオープンソースリソースを備えています。 3。PHPは解釈された言語であり、実行プロセスには語彙分析、文法分析、編集、実行が含まれます。 4.PHPは、ユーザー登録システムなどの高度なアプリケーションについてMySQLと組み合わせることができます。 5。PHPをデバッグするときは、error_reporting（）やvar_dump（）などの関数を使用できます。 6. PHPコードを最適化して、キャッシュメカニズムを使用し、データベースクエリを最適化し、組み込み関数を使用します。 7

PHP対Python：コア機能と機能 PHP対Python：コア機能と機能 Apr 13, 2025 am 12:16 AM

PHPとPythonにはそれぞれ独自の利点があり、さまざまなシナリオに適しています。 1.PHPはWeb開発に適しており、組み込みのWebサーバーとRich Functionライブラリを提供します。 2。Pythonは、簡潔な構文と強力な標準ライブラリを備えたデータサイエンスと機械学習に適しています。選択するときは、プロジェクトの要件に基づいて決定する必要があります。

誇大広告を超えて：今日のPHPの役割の評価 誇大広告を超えて：今日のPHPの役割の評価 Apr 12, 2025 am 12:17 AM

PHPは、特にWeb開発の分野で、最新のプログラミングで強力で広く使用されているツールのままです。 1）PHPは使いやすく、データベースとシームレスに統合されており、多くの開発者にとって最初の選択肢です。 2）動的コンテンツ生成とオブジェクト指向プログラミングをサポートし、Webサイトを迅速に作成および保守するのに適しています。 3）PHPのパフォーマンスは、データベースクエリをキャッシュおよび最適化することで改善でき、その広範なコミュニティと豊富なエコシステムにより、今日のテクノロジースタックでは依然として重要になります。

PHP対その他の言語：比較 PHP対その他の言語：比較 Apr 13, 2025 am 12:19 AM

PHPは、特に迅速な開発や動的なコンテンツの処理に適していますが、データサイエンスとエンタープライズレベルのアプリケーションには良くありません。 Pythonと比較して、PHPはWeb開発においてより多くの利点がありますが、データサイエンスの分野ではPythonほど良くありません。 Javaと比較して、PHPはエンタープライズレベルのアプリケーションでより悪化しますが、Web開発により柔軟性があります。 JavaScriptと比較して、PHPはバックエンド開発により簡潔ですが、フロントエンド開発のJavaScriptほど良くありません。

Debian OpenSSL構成を確認する方法 Debian OpenSSL構成を確認する方法 Apr 12, 2025 pm 11:57 PM

この記事では、DebianシステムのOpenSSL構成を確認して、システムのセキュリティステータスをすばやく把握できるように、いくつかの方法を紹介します。 1.最初にOpenSSLバージョンを確認し、OpenSSLがインストールされているかどうかを確認し、バージョン情報を確認します。端末に次のコマンドを入力します。OpenSSlversionがインストールされていない場合、システムはエラーを促します。 2。構成ファイルを表示します。 OpenSSLのメイン構成ファイルは、通常/etc/ssl/openssl.cnfにあります。テキストエディター（Nanoなど）を使用して、次のように表示できます。sudonano/etc/ssl/openssl.cnfこのファイルには、キー、証明書、暗号化アルゴリズムなどの重要な構成情報が含まれています。 3。OPEを利用します

Debian Apacheログを使用してWebサイトのパフォーマンスを向上させる方法 Debian Apacheログを使用してWebサイトのパフォーマンスを向上させる方法 Apr 12, 2025 pm 11:36 PM

この記事では、Debianシステムの下でApacheログを分析することにより、Webサイトのパフォーマンスを改善する方法について説明します。 1.ログ分析の基本Apacheログは、IPアドレス、タイムスタンプ、リクエストURL、HTTPメソッド、応答コードなど、すべてのHTTP要求の詳細情報を記録します。 Debian Systemsでは、これらのログは通常、/var/log/apache2/access.logおよび/var/log/apache2/error.logディレクトリにあります。ログ構造を理解することは、効果的な分析の最初のステップです。 2。ログ分析ツールさまざまなツールを使用してApacheログを分析できます。コマンドラインツール：GREP、AWK、SED、およびその他のコマンドラインツール。

PHP：多くのウェブサイトの基礎 PHP：多くのウェブサイトの基礎 Apr 13, 2025 am 12:07 AM

PHPが多くのWebサイトよりも優先テクノロジースタックである理由には、その使いやすさ、強力なコミュニティサポート、広範な使用が含まれます。 1）初心者に適した学習と使用が簡単です。 2）巨大な開発者コミュニティと豊富なリソースを持っています。 3）WordPress、Drupal、その他のプラットフォームで広く使用されています。 4）Webサーバーとしっかりと統合して、開発の展開を簡素化します。

See all articles