编译安装MySQL实现corosync+pacemaker+drbd+mysql高可用 实验拓扑图： 实验节点：节点一： IP ： 172.16.249.248 host: node1.stu11.com node1 节点二： IP ： 172.16.249.122 host: node3.stu11.com node3 650) this.width=650;" src="http://www.68idc.cn/
编译安装MySQL实现corosync+pacemaker+drbd+mysql高可用
实验拓扑图：
实验节点：节点一：IP：172.16.249.248 host: node1.stu11.com node1
节点二：IP：172.16.249.122 host: node3.stu11.com node3
节点二的配置前准备：
##########下载安装drbd，以及依赖的包########
[root@node3 ~ ]# rpm -ivh drbd84-utils-8.9.1-1.el6.elrepo.x86_64.rpm kmod-drbd84-8.4.5-504.1.el6.x86_64.rpm
[root@node3 ~ ]# yum install corosync pacemaker -y ####安装corosync和pacemaker
[root@node3 .ssh ]#fdisk /dev/sda ####创建用作drbd的磁盘，我这里使用分区模拟了
Command (m for help): n
Command action e extended p
primary partition (1-4) p
Partition number (1-4): 3
First cylinder (7859-15665, default 7859):
Using default value 7859
Last cylinder,
+cylinders or +size{K,M,G} (7859-15665, default 15665): +2G ##2G同步快一点，实际大小看生产需要
Command (m for help): w
[root@node3 .ssh ]#partx -a /dev/sda节点一配置：
[root@node1 ~ ]# rpm -ivh drbd84-utils-8.9.1-1.el6.elrepo.x86_64.rpm kmod-drbd84-8.4.5-504.1.e
[root@node1 ~ ]# yum install corosync pacemaker -y
[root@node1 ~ ]#fdisk /dev/sda
Command (m forhelp): n
Command action e extended p
primary partition (1-4) p
Partition number(1-4): 3
First cylinder(7859-15665, default 7859):
Using default value7859
Last cylinder,
+cylinders or +size{K,M,G} (7859-15665, default 15665): +2G
Command (m forhelp): w
[root@node1 ~ ]#partx -a /dev/sda##############################编辑corosync配置文件##############################
[root@node1 corosync]# cp corosync.conf.example corosync.conf
[root@node1 corosync]# vim corosync.conf ##仅显示的是在使用的部分
2 compatibility: whitetank
3
4 totem {
5 version: 2
10 secauth: on
12 threads: 0
17 interface {
19 ringnumber: 0
25 bindnetaddr: 172.16.0.0
39 mcastaddr: 239.22.11.123 ##指定组播地址
44 mcastport: 5405
49 ttl: 1
50 }
51 }
53 logging {
57 fileline: off
60 to_stderr: no
63 to_logfile: yes
64 logfile: /var/log/cluster/corosync.log
66 to_syslog: yes
68 debug: off
72 timestamp: on
73 logger_subsys {
74 subsys: AMF
75 debug: off
76 }
77 }
78 service { ####将pacemaker以模块方式和corosync结合工作
79 ver: 0
80 name: pacemaker
81 }##########################################生成密钥########################################
[root@node1 yum.repos.d ]# corosync-keygen Writing corosync key to /etc/corosync/authkey. [root@node1 drbd.d]# ls global_common.conf global_common.conf.bak mydisk.res [root@node1 corosync]# ll total 24 -r-------- 1 root root 128 Jan 17 09:38 authkey ###保证权限是600或400 -rw-r--r-- 1 root root 2701 Jan 17 09:38 corosync.conf [root@node1 corosync]# scp corosync.conf authkey node3:/etc/corosync/ corosync.conf 100% 2701 2.6KB/s 00:00 authkey 100% 128 0.1KB/s 00:00 [root@node3 corosync ]# ll //查看各节点密钥文件权限都是600,默认是不需要修改的。 total 24 -r-------- 1 root root 128 Jan 17 09:38 authkey
############################配置各节点DRBD配置文件配置##############################################
[root@node1 drbd.d]# vim global_common.conf
5 global {
6 usage-count no;
7 #minor-count dialog-refresh disable-ip-verification
8 }
10 common {
11 handlers {
17 pri-on-incon-degr "/usr/lib/drbd/notify-pri-on-incon-degr.sh;/usr/lib/drbd/notify-emergency-reboot.sh; echo b > /proc/sysrq-trigger ; reboot-f";
18 pri-lost-after-sb "/usr/lib/drbd/notify-pri-lost-after-sb.sh;/usr/lib/drbd/notify-emergency-reboot.sh; echo b > /proc/sysrq-trigger ; reboot-f";
19 local-io-error "/usr/lib/drbd/notify-io-error.sh;/usr/lib/drbd/notify-emergency-shutdown.sh; echo o > /proc /sysrq-trigger ; halt -f";
25 }
26
27 startup {
28 # wfc-timeout degr-wfc-timeout outdated-wfc-timeout wait-after-sb
29 }
30
31 options {
32 # cpu-mask on-no-data-accessible
33 }
35 disk {
36 on-io-error detach; ###磁盘故障直接拆除
41 }
42
43 net {
44 protocol C; ###最稳妥的协议
45 cram-hmac-alg "sha1";
46 shared-secret "test";
54 }
56 syncer {
57 rate 100M;
58
59 }
60 } //一定要注意最后一个引号，是全局段的。##################################配值DRBD资源文件##################################################
[root@node1 drbd.d ]#vim mydisk.res
1 resource mydisk {
2 on node1.stu11.com {
3 device /dev/drbd0;
4 disk /dev/sda3;
5 address 172.16.249.248:7789;
6 meta-disk internal;
7 }
8 on node3.stu11.com {
9 device /dev/drbd0;
10 disk /dev/sda3;
11 address 172.16.249.122:7789;
12 meta-disk internal;
13 }
14 }#################################同步两个节点的配置文件###########################################
[root@node1 drbd.d]# scp global_common.conf mydisk.res node3:/etc/drbd.d/ global_common.conf 100% 2101 2.1KB/s 00:00 mydisk.res 100% 257 0.3KB/s 00:00
##################################各节点资源初始化#################################################
[root@node1 corosync]# drbdadm create-md mydisk initializing activity log NOT initializing bitmap Writing meta data... New drbd meta data block successfully created.
[root@node3 drbd.d]# drbdadm create-md mydisk initializing activity log NOT initializing bitmap Writing meta data... New drbd meta data block successfully created. [root@node3 corosync]# service drbd start Starting DRBD resources:
##########################################启动各节点DRBD###########################################
[root@node1 corosync]# service drbd start Starting DRBD resources:
650) this.width=650;" src="http://www.68idc.cn/help/uploads/allimg/151111/1214304240-1.jpg" title="2.png" alt="wKiom1S5-P-yT5ifAADHFsB3Q2U098.jpg" />
[root@node1 corosync ]# drbd-overview //查看节点状态
0:mydisk/0 Connected Secondary/Secondary Inconsistent/Inconsistent
##########################提升一个节点为主节点:并且查看数据在同步######################################
[root@node1 corosync]# drbdadm primary --force mydisk [root@node1 corosync]# drbd-overview 0:mydisk/0 SyncSource Primary/Secondary UpToDate/Inconsistent [>...................] sync'ed: 7.1% (1959028/2103412)K
650) this.width=650;" src="http://www.68idc.cn/help/uploads/allimg/151111/1214302564-2.jpg" title="3.png" alt="wKioL1S5-zLRwAzuAAGTM_9o4Nw385.jpg" />
##################################对DRBD格式化####################################################
[root@node1 corosync ]# mke2fs -t ext4 /dev/drbd0 //对主节点格式化
650) this.width=650;" src="http://www.68idc.cn/help/uploads/allimg/151111/1214302602-3.jpg" title="4.png" alt="wKiom1S5-sOy7yq9AADDFnFRipc185.jpg" />
#####################################挂载创建测试文件############################################
[root@node1 corosync ]# mount /dev/drbd0 /mnt/ [root@node1 corosync]# cd /mnt/ [root@node1 mnt ]#ls lost+found [root@node1 mnt ]#touch test.txt [root@node1 mnt ]#ls lost+found test.txt
##################### ##降为从节点把另一个节点升为主节点挂载查看测试文件########################
[root@node1 ~ ]# umount /mnt/ [root@node1 ~ ]#drbd drbdadm drbdmeta drbd-overview drbdsetup [root@node1 ~ ]#drbdadm secondary mydisk [root@node1 ~ ]#drbd-overview 0:mydisk/0 Connected Secondary/Secondary UpToDate/UpToDate
#####################节点二升级主节点，查看测试文件#################################
650) this.width=650;" src="http://www.68idc.cn/help/uploads/allimg/151111/1214305H8-4.jpg" title="5.png" alt="wKiom1S5-_ihLcNtAAEVRvGonog788.jpg" />
至此：两个节点的DRBD已经建成同步完成。开始布置两个节点的mysql。
######################准备各节点的mysql############################################# 准备编译环境及安装：
[root@node3 /]# yum groupinstall "Development Tools" -y
[root@node3 /]# yum install "Server Platform Developmnet"
[root@node3 ~ ]# yum install cmake -y //mariadb是使用cmake的编译安装的
[root@node3 ~ ]# tar xf mariadb-10.0.13.tar.gz -C /usr/local/
[root@node3 local ]#groupadd -g 306 mysql
[root@node3 local ]#useradd -u 306 -g 306 mysql
[root@node3 local ]#id mysql
uid=306(mysql) gid=306(mysql) groups=306(mysql)
[root@node3 local ]#mkdir /mydata
[root@node3 ~ ]#umount /mnt/
[root@node3 local ]#chown -R mysql:mysql /mydata
[root@node3 ~ ]#mount /dev/drbd0 /mydata
[root@node3 mariadb-10.0.13 ]#cmake .
-DCMAKE_INSTALL_PREFIX=/usr/local/mysql \##指定安装路径
-DMYSQL_DATADIR=/mydata \ ##指定库位置
-DWITH_INNOBASE_STORAGE_ENGINE=1 \ ##指定存储引擎
-DWITH_ARCHIVE_STORAGE_ENGINE=1\
-DWITH_BLACKHOLE_STORAGE_ENGINE=1\
-DWITH_READLINE=1\
-DWITH_SSL=system\ ##定制SSL功能
-DWITH_ZLIB=system\ ##定制ZLIB功能
-DWITH_LIBWRAP=0\
-DMYSQL_UNIX_ADDR=/tmp/mysql.sock\ ##sock位置
-DDEFAULT_CHARSET=utf8 \ ##默认字符集
-DDEFAULT_COLLATION=utf8_general_ci
#make
#make之后
Linking CXX
executable my_safe_process
[100%] Built target
my_safe_process
[root@node3 mysql ]#ls /mydata/
aria_log.00000001 aria_log_control ibdata1
ib_logfile0 ib_logfile1 mysql performance_schema test
[root@node3support-files ]# cp my-large.cnf /etc/mysql/my.cnf
[root@node3support-files ]# cd /etc/mysql
[root@node3 mysql ]#ls
my.cnf
[root@node3 mysql ]#vim my.cnf #####在mysqld添加如下
innodb_file_per_table = on
datadir = /mydata
[root@node3 mysql ]#
service mysqld start
Starting
MySQL...
[ OK ]
[root@node3 mysql ]# mysql //登陆已经正常了
Welcome to the MySQL
monitor. Commands end with ; or \g.
Your MySQL
connection id is 4
Server version: 5.5.5-10.0.13-MariaDB-log Source
distribution
Copyright (c) 2000,
2013, Oracle and/or its affiliates. All rights reserved. 650) this.width=650;" src="http://www.68idc.cn/help/uploads/allimg/151111/12143055N-5.jpg" title="6.png" alt="wKioL1S6AKiBdZmaAACOJ8rbeRU363.jpg" />
注意：同样的步骤部署第二个节点mysql但是，不要初始化。因为共享磁盘已经初始化过了。
########################下面，就可以使用crmsh配置资源了。###########################
下面，就可以使用crmsh配置资源了。
首先：保证我们两个节点的服务不会开机自动启动。
650) this.width=650;" src="http://www.68idc.cn/help/uploads/allimg/151111/12143033X-6.jpg" title="7.png" alt="wKioL1S6AhCjIfplAADGdV1gZTs642.jpg" />
650) this.width=650;" src="http://www.68idc.cn/help/uploads/allimg/151111/1214303016-7.jpg" title="8.png" alt="wKiom1S6AV3BIyK6AAEBu0s2HYQ789.jpg" />
##################启动两个节点的corosync##########################################################
[root@node3 ~ ]#service corosync start Starting Corosync Cluster Engine (corosync): [ OK ]
[root@node3 ~ ]# service mysqld stop ##停掉我们使用的所有资源 Stopping mysqld: [ OK ] [root@node3 ~ ]#umount /mydata/ [root@node3 ~ ]#drbd-overview 0:mydisk/0 Connected Primary/Secondary UpToDate/UpToDate [root@node3 ~ ]#drbdadm secondary mydisk [root@node3 ~ ]#drbd-overview 0:mydisk/0 Connected Secondary/Secondary UpToDate/UpToDate [root@node3 ~ ]#service drbd stop Stopping all DRBD resources: .
650) this.width=650;" src="http://www.68idc.cn/help/uploads/allimg/151111/1214301141-8.jpg" title="9.png" alt="wKioL1S6Av7xuRf-AAE6aE3fG9I709.jpg" />
安装crmsh ##安装并且定义
[root@node3 ~ ]# yum install crmsh-2.1-1.6.x86_64.rpm [root@node3 ~ ]# crm crm(live)# configure #####################第一步：定义前提属性############################# crm(live)configure# property stonith-enabled=false //禁用stonish crm(live)configure# property no-quorum-policy=ignore //定义无票策略 #####################第二步：定义DRBD主资源########################### crm(live)configure# primitive mydrbd ocf:linbit:drbd params drbd_resource="mydisk" op monitor role=Master timeout=20 interval=10 op monitor role=Slave timeout=20 interval=10 op start timeout=240 op stop timeout=100 ####################第三步：定义DRBD主从资源########################## crm(live)configure#ms ms_mydrbd mydrbd meta master-max="1" master-node-max="1" clone-max="2" clone-node-max="1" notify="true" ####################第四步：定义文件系统资源########################## crm(live)configure#primitive myfs ocf:heartbeat:Filesystem params device=/dev/drbd0 directory=/mydata fstype="ext4" op monitor timeout=40 interval=20 op start timeout=60 op stop timeout=60 ####################第五步：定义协同约束############################## crm(live)configure#colocation mydrbd-master_with_myfs inf: ms_mydrbd:Master myfs crm(live)configure# ####################第六步：定义顺序约束############################## crm(live)configure#order ms_mydrbd-master_before_myfs inf: ms_mydrbd:promote myfs:start #################第七步：定义流动IP################################### crm(live)configure#primitive myvip ocf:heartbeat:IPaddr params ip=172.16.11.11 op monitor timeout=20 interval=10 op start timeout=20 op stop timeout=20 ###################第八步：定义mysql服务资源############################ crm(live)configure#primitive myservice lsb:mysqld op monitor timeout=20 interval=20 crm(live)configure# ###################第九步：定义他们为一个组资源######################## crm(live)configure#group mygroup myvip myfs ms_mydrbd:Master myservice ####################第十步：定义他们的协同约束######################### crm(live)configure#order myfs_before_myservice inf: myfs:start myservice:start crm(live)configure# commit ##提交 interval in monitor_Master must be unique crm(live)configure#show ##查看我们定义的所有资源
切换测试结果：
至此高可用全部完成！
![[Web フロントエンド] Node.js クイック スタート](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
