ホームページ データベース mysql チュートリアル 640-605 Remote Access 2.0 考试大纲

640-605 Remote Access 2.0 考试大纲

Jun 07, 2016 pm 03:04 PM
access remote

★Exam Description The Remote Access exam (RMTAC 640-605) is one exam within two different series of exams required to achieve either CCNP or CCDP Routing and Switching certification. ★Exam Topics The following topics are general guidelin


  ★Exam Description
   The Remote Access exam (RMTAC 640-605) is one exam within two different series of exams required to achieve either CCNP or CCDP Routing and Switching certification.
  ★Exam Topics
   The following topics are general guidelines for the content likely to be included on the Remote Access exam. However, other related topics may also appear on any specific delivery of the exam.
  ■.Cisco Remote Access Networks Introduction
   * Specify and /or identify the Cisco products that best meet the WAN connection requirements for permanent or dialup access connections
  ■.Selecting CISCO Products for Remote Connections
   * Explain and/or identify the advantages and disadvantages of WAN connection types
   * Select the appropriate WAN connection types that address specific site connection considerations.
   * Select Cisco equipment that will suit the specific needs of a WAN topology
  ■.Assembling and Cabling the WAN Components
   * Identify the components and connections necessary to allow WAN connections like Frame Relay, and ISDN PRI from the central site to a branch office.
   * Identify the components and connections necessary to allow WAN connections like Frame Relay, and ISDN BRI from a branch office to the central site
   * Identify the components and connections necessary to allow a WAN connections like ISDN BRI from a telecommuter site to the central site
  ■.Configuring Asynchronous Connections to a Central Site with Modems
   * Specify the commands and procedures necessary to configure an access server for modem connectivity so telecommuters can access the central site.
   * Specify the commands and procedures to configure the central site for dial out connections.
   * Specify the commands used to reverse Telnet to the modem and configure the modem for basic asynchronous operations.
   * Specify the commands and procedures used to set up the modem autoconfiguration feature.
  ■.Configuring PPP and Controlling Network Access with PAP and CHAP
   * Specify the commands and syntax used to configure a PPP connection between the central site and a branch office
   * Specify the commands and syntax to configure PAP or CHAP authentication to allow access to a secure site.
   * Configure Multilink PPP to increase the data throughput.
   * Specify the commands used to verify proper PPP configuration and troubleshoot an incorrect PPP configuration.
   * Accessing the Central Site with Windows 95
   * Specify the commands and procedures to configure a PC to complete a dialup call to the central site router through the traditional telephone network.
  ■.Using ISDN and DDR Technologies to Enhance Remote Connectivity
   * Identify when to use ISDN BRI and PRI services and select the service that best suits a set of given requirements.
   * Identify the Q.921 and Q.931 signaling and call setup sequences.
   * Specify the commands used to configure ISDN BRI and PRI
   * Specify the commands used to configure DDR
  ■.Optimizing the use of DDR Interfaces
   * Specify or select appropriate dialup capabilities to place a call.
   * Specify the commands and procedures to configure rotary groups and dialer profiles
   * Specify the commands used to verify proper dialer profile or rotary group configuration and troubleshoot an incorrect configuration.
  ■.Using X.25 for Remote Access
   * Specify the commands and procedures to configure an X.25 WAN connection between the central office and branch office
   * Specify proper X.121 addresses and the commands used to assign them to router interfaces
   * Specify the commands and procedures used to verify proper X.25 configuration and troubleshoot incorrect X.25 configuration
  ■.Establishing a Dedicated Frame Relay Connection and Control Traffic Flow
   * Specify the commands and procedures used to configure a Frame Relay WAN connection between the central office and branch office
   * Specify the commands to configure subinterfaces on virtual interfaces to solve split horizon problems.
   * Specify the commands used to configure Frame Relay traffic shaping.
   * Specify the commands and procedures used to verify proper Frame Relay configuration and troubleshoot an incorrect configuration
  ■.Enabling a Backup to the Permanent Connection
   * Specify the procedure and commands used to configure a backup connection that activates upon primary line failure.
   * Specify the procedure and commands used to configure a backup connection to activate when the primary line reaches a specified threshold.
   * Specify the procedure and commands used to configure a dialer to function as backup to the primary interface.
  ■.Managing Network Performance with Queuing and Compression
   * Determine why queuing is enabled, identify alternative queuing protocols that Cisco products support, and determine the best queuing method to implement.
   * Specify the commands to configure weighted-fair, priority and custom queuing
   * Specify the commands and procedures used to verify proper queuing configuration and troubleshoot incorrect configuration
   * Specify the commands and procedures used to effectively select and implement compression
  ■.Scaling IP Addresses with Network Address Translation
   * Describe how NAT and PAT operate.
   * Specify the commands and procedures to configure NAT and PAT to allow reuse of registered IP addresses in a private network.
   * Verify proper configuration of NAT and PAT with available Cisco verification commands.
  ■.Using AAA to Scale Access Control in an Expanding Network
   * Specify, recognize or describe the security features of CiscoSecure and the operation of a CiscoSecure server.
   * Specify the commands and procedures used to configure a router to access a CiscoSecure server and to use AAA.
   * Specify the commands used to configure AAA on a router to control access from remote access clients.
  

【责编:admin】

このウェブサイトの声明
この記事の内容はネチズンが自主的に寄稿したものであり、著作権は原著者に帰属します。このサイトは、それに相当する法的責任を負いません。盗作または侵害の疑いのあるコンテンツを見つけた場合は、admin@php.cn までご連絡ください。

ホットAIツール

Undresser.AI Undress

Undresser.AI Undress

リアルなヌード写真を作成する AI 搭載アプリ

AI Clothes Remover

AI Clothes Remover

写真から衣服を削除するオンライン AI ツール。

Undress AI Tool

Undress AI Tool

脱衣画像を無料で

Clothoff.io

Clothoff.io

AI衣類リムーバー

Video Face Swap

Video Face Swap

完全無料の AI 顔交換ツールを使用して、あらゆるビデオの顔を簡単に交換できます。

ホットツール

メモ帳++7.3.1

メモ帳++7.3.1

使いやすく無料のコードエディター

SublimeText3 中国語版

SublimeText3 中国語版

中国語版、とても使いやすい

ゼンドスタジオ 13.0.1

ゼンドスタジオ 13.0.1

強力な PHP 統合開発環境

ドリームウィーバー CS6

ドリームウィーバー CS6

ビジュアル Web 開発ツール

SublimeText3 Mac版

SublimeText3 Mac版

神レベルのコード編集ソフト(SublimeText3)

C#でマルチスレッドの利点は何ですか? C#でマルチスレッドの利点は何ですか? Apr 03, 2025 pm 02:51 PM

マルチスレッドの利点は、特に大量のデータを処理したり、時間のかかる操作を実行したりするために、パフォーマンスとリソースの使用率を改善できることです。複数のタスクを同時に実行できるようになり、効率が向上します。ただし、あまりにも多くのスレッドがパフォーマンスの劣化につながる可能性があるため、CPUコアの数とタスク特性に基づいてスレッドの数を慎重に選択する必要があります。さらに、マルチスレッドプログラミングには、同期メカニズムを使用して解決する必要があるデッドロックや人種条件などの課題が含まれ、同時プログラミングの確固たる知識が必要であり、長所と短所を比較検討し、それらを慎重に使用する必要があります。

SQL IFステートメントの使用方法 SQL IFステートメントの使用方法 Apr 09, 2025 pm 06:12 PM

SQLステートメントは、SQLステートメントを条件付きで実行するために使用され、構文は次のようになります。if(条件)then {ステートメント} else {ステートメント} end if;。条件は有効なSQL式である可能性があり、条件が真の場合、then句を実行します。条件が偽の場合は、else句を実行します。ステートメントをネストできる場合、より複雑な条件付きチェックを可能にします。

rootとしてmysqlにログインできません rootとしてmysqlにログインできません Apr 08, 2025 pm 04:54 PM

ルートとしてMySQLにログインできない主な理由は、許可の問題、構成ファイルエラー、一貫性のないパスワード、ソケットファイルの問題、またはファイアウォール傍受です。解決策には、構成ファイルのBind-Addressパラメーターが正しく構成されているかどうかを確認します。ルートユーザー許可が変更されているか削除されてリセットされているかを確認します。ケースや特殊文字を含むパスワードが正確であることを確認します。ソケットファイルの許可設定とパスを確認します。ファイアウォールがMySQLサーバーへの接続をブロックすることを確認します。

ノード環境で403エラーを返すサードパーティのインターフェイスを回避する方法は? ノード環境で403エラーを返すサードパーティのインターフェイスを回避する方法は? Apr 01, 2025 pm 02:03 PM

ノード環境で403エラーを返すサードパーティのインターフェイスを回避する方法。 node.jsを使用してサードパーティのWebサイトインターフェイスを呼び出すと、403エラーを返す問題が発生することがあります。 �...

ドメイン全体のvue axiosによって引き起こされる「ネットワークエラー」を解決する方法 ドメイン全体のvue axiosによって引き起こされる「ネットワークエラー」を解決する方法 Apr 07, 2025 pm 10:27 PM

VUE axiosのクロスドメイン問題を解決する方法は次のとおりです。CORSプラグインを使用してWebSockingを使用してJSONPを使用してAxiosプロキシを使用してサーバー側にCORSヘッダーを構成します。

easywechat 5.5でcomponent_verify_ticketを効率的に取得する方法は? easywechat 5.5でcomponent_verify_ticketを効率的に取得する方法は? Apr 01, 2025 pm 12:42 PM

easywechat5.5でcomponentverifyを取得します...

Debian Apacheログを使用してWebサイトのパフォーマンスを向上させる方法 Debian Apacheログを使用してWebサイトのパフォーマンスを向上させる方法 Apr 12, 2025 pm 11:36 PM

この記事では、Debianシステムの下でApacheログを分析することにより、Webサイトのパフォーマンスを改善する方法について説明します。 1.ログ分析の基本Apacheログは、IPアドレス、タイムスタンプ、リクエストURL、HTTPメソッド、応答コードなど、すべてのHTTP要求の詳細情報を記録します。 Debian Systemsでは、これらのログは通常、/var/log/apache2/access.logおよび/var/log/apache2/error.logディレクトリにあります。ログ構造を理解することは、効果的な分析の最初のステップです。 2。ログ分析ツールさまざまなツールを使用してApacheログを分析できます。コマンドラインツール:GREP、AWK、SED、およびその他のコマンドラインツール。

Apache用のZendを構成する方法 Apache用のZendを構成する方法 Apr 13, 2025 pm 12:57 PM

ApacheでZendを構成する方法は? Apache WebサーバーでZend Frameworkを構成する手順は次のとおりです。ZendFrameworkをインストールし、Webサーバーディレクトリに抽出します。 .htaccessファイルを作成します。 Zend Application Directoryを作成し、index.phpファイルを追加します。 Zend Application(Application.ini)を構成します。 Apache Webサーバーを再起動します。

See all articles