多くの記事では、ホイスティング、Temporal Dead Zone(TDZ)、機能 や ブロックスコープ など、多くの場合標準を参照しません。これらの用語の中には、言語標準にさえ含まれていないものもあります。言語標準を参照せずにトピックを説明することはまったく問題ありません。ただし、JavaScript を包括的に理解するには ECMAScript 標準を理解することが重要であるため、もう少し詳しく知りたい人のためにこのトピックを参照して説明します。
ECMAScript 2024 としても知られる ECMAScript の第 15 版です。
実行コンテキストは、ECMAScript 標準で定義された抽象構造です。現在のコードが実行される環境です。話を単純化するために、グローバル実行コンテキストと関数実行コンテキストが存在すると仮定します。
// Global Execution Context
let globalVariable = 'This is a global variable'
function outerFunction() {
// Outer Function Execution Context
let outerVariable = 'This is an outer variable'
function innerFunction() {
// Inner Function Execution Context
let innerVariable = 'This is an inner variable'
}
innerFunction()
}
outerFunction()
LexicalEnvironment と VariableEnvironment は両方とも環境レコードです。環境レコードは、ECMAScript 標準で定義された抽象データ構造でもあります。これにより、識別子の特定の変数および関数への関連付けが確立されます。識別子は、JavaScript の値、関数、クラス、その他のデータ構造を参照する名前です。次の例では、variable = 42 とします。variable は、数値 42 の値を格納する変数の名前 (識別子) です。
コードが実行されるたびに、実行コンテキストによって新しい環境レコードが作成されます。識別子の保存に加えて、環境レコードには [[OuterEnv]] フィールド (null または外部環境レコードへの参照) があります。
前の例の実行コンテキストと環境レコードは、次のようにグラフで表すことができます:
// Global Execution Context
{
// Environment Record
{
identifier: 'globalVariable'
value: 'This is a global variable'
}
{
identifier: 'outerFunction'
value: Function
}
[[OuterEnv]]: null
}
// Outer Function Execution Context
{
// Environment Record
{
identifier: 'outerVariable'
value: 'This is an outer variable'
}
{
identifier: 'innerFunction'
value: Function
}
[[OuterEnv]]: Global Execution Context
}
// Inner Function Execution Context
{
// Environment Record
{
identifier: 'innerVariable'
value: 'This is an inner variable'
}
[[OuterEnv]]: Outer Function Execution Context
}
作成フェーズ と 実行フェーズ という 2 つの異なるフェーズがあるということです。これら 2 つのフェーズは、var と let または const の違いを理解する上で不可欠です。
let 宣言と const 宣言は、実行中の実行コンテキストの LexicalEnvironment をスコープとする変数を定義します。変数は、変数を含む環境レコードがインスタンス化されるときに作成されますが、変数の LexicalBinding が評価されるまではいかなる方法でもアクセスできません。 Initializer を使用した LexicalBinding によって定義された変数には、変数の作成時ではなく、LexicalBinding の評価時に Initializer の AssignmentExpression の値が割り当てられます。 let 宣言内の LexicalBinding に Initializer がない場合、LexicalBinding が評価されるときに、変数には未定義の値が割り当てられます。この文を理解するために、一文ずつ説明します。
let 宣言と const 宣言は、実行中の実行コンテキストの LexicalEnvironment をスコープとする変数を定義します。let または const キーワードを使用して作成された変数は、それらが定義されたブロックにスコープされることを意味します。コード ブロックは、中括弧内の任意の JavaScript コードです。
let condition = true
if (condition) {
let blockScopedVariable = 'This is a block-scoped variable'
console.log(blockScopedVariable) // This is a block-scoped variable
}
console.log(blockScopedVariable) // ReferenceError: blockScopedVariable is not defined
// Global Execution Context
{
// Environment Record
{
identifier: 'condition'
value: true
}
[[OuterEnv]]: null
// Block Environment Record
{
identifier: 'variable'
value: 'This is a block-scoped variable'
}
[[OuterEnv]]: Global Execution Context
}
変数は、変数を含む環境レコードがインスタンス化されるときに作成されますが、変数の LexicalBinding が評価されるまではいかなる方法でもアクセスできません。
As previously mentioned, the Execution Context has two phases. This statement means that during the Creation Phase of the Execution Context, variables are stored in their corresponding Environment Record but have not yet been assigned any value. They are uninitialised.
console.log(varaible) // ReferenceError: Cannot access 'varaible' before initialization
let varaible = 42
// Global Execution Context Creation Phase
{
// Environment Record
{
identifier: 'variable'
value: uninitialised
}
[[OuterEnv]]: null
}
Because the variable is already created (instantiated) in the Environment Record, the Execution Context knows about it but can't access it before evaluation(the Execution Phase of the Execution context). The state of the variable being uninitialised is also known as a Temporary Dead Zone(TDZ). We would have a different error if the variable hadn't been created in the Environment Record.
console.log(varaible) // ReferenceError: varaible is not defined
// Global Execution Context Creation Phase
{
// Environment Record
{
}
[[OuterEnv]]: null
}
A variable defined by a LexicalBinding with an Initializer is assigned the value of its Initializer's AssignmentExpression when the LexicalBinding is evaluated, not when the variable is created.
LexicalBinding is a form of the Identifier, which represents the variable's name. The Initializer is the variable's value, and AssignmentExpression is the expression used to assign that value to the variable's name, such as the '=' sign in let variable = 42. Therefore, the statement above means that variables created with let or const keywords are assigned their value during the Execution Phase of the Execution Context.
let variable = 42
// Global Execution Context Creation Phase
{
// Environment Record
{
identifier: 'variable'
value: uninitialised
}
[[OuterEnv]]: null
}
// Global Execution Context Execution Phase
{
// Environment Record
{
identifier: 'variable'
value: 42
}
[[OuterEnv]]: null
}
If a LexicalBinding in a let declaration does not have an Initializer the variable is assigned the value undefined when the LexicalBinding is evaluated.
This means that if a let variable is created without an initial value, undefined is assigned to it during the Execution Phase of the Execution Context. Variables declared with the const keyword behave differently. I will explain it in a few paragraphs later.
let variable
// Global Execution Context Creation Phase
{
// Environment Record
{
identifier: 'variable'
value: uninitialised
}
[[OuterEnv]]: null
}
// Global Execution Context Execution Phase
{
// Environment Record
{
identifier: 'variable'
value: undefined
}
[[OuterEnv]]: null
}
The standard also defines a subsection called 14.3.1.1 'Static Semantics: Early Errors,' which explains other essential aspects of variables defined with the let and const keywords.
LexicalDeclaration: LetOrConst BindingList;
- It is a Syntax Error if the BoundNames of BindingList contains "let".
- It is a Syntax Error if the BoundNames of BindingList contains any duplicate entries. LexicalBinding : BindingIdentifier Initializer
- It is a Syntax Error if Initializer is not present and IsConstantDeclaration of the LexicalDeclaration containing this LexicalBinding is true.
LetOrConst is a grammar rule which specifies that variable declarations can start with the let or const keywords.
BindingList is a list of variables declared with let or const keywords. We could imagine BindingList as a data structure like this:
let a = 1
let b = 2
let c = 3
const d = 4
const e = 5
BindingList: [
{
identifier: 'a',
value: 1
},
{
identifier: 'b',
value: 2
},
{
identifier: 'c',
value: 3
},
{
identifier: 'd',
value: 4
},
{
identifier: 'e',
value: 5
}
]
A Syntax Error is an error that breaks the language's grammatical rules. They occur before the code's execution. Let's analyse the first Syntax Error.
- It is a Syntax Error if the BoundNames of BindingList contains "let".
The BoundNames of BindingList are the names of variables declared with let or const keywords.
let a = 1 let b = 2 let c = 3 const d = 4 const e = 5 BoundNames: ['a', 'b', 'c', 'd', 'e']
A Syntax Error will occur when the BoundNames list contains “let”.
let let = 1 // SyntaxError: let is disallowed as a lexically bound name const let = 1 // SyntaxError: let is disallowed as a lexically bound name
- It is a Syntax Error if the BoundNames of BindingList contains any duplicate entries.
It means we can't use the same names for variables declared with the let or const keywords if they are already used in that scope.
let a = 1 let a = 2 // SyntaxError: Identifier 'a' has already been declared
- It is a Syntax Error if Initializer is not present and IsConstantDeclaration of the LexicalDeclaration containing this LexicalBinding is true.
IsConstantDeclaration is an abstract operation in the standard that checks if the variable is declared with the const keyword. This rule could be decrypted like that: if IsConstantDeclaration is true and the variable doesn't have an Initializer, a Syntax Error will be returned.
const x; // SyntaxError: Missing initializer in const declaration
Another vital thing only related to the const keyword: variables declared with the const keyword can't be reassigned. It is not stated explicitly in the standard, but we can get it from the IsConstantDeclaration operation and the syntax rule that variables declared with the const keyword should always be initialised with the Initializer
const variable = 42 variable = 46 // TypeError: Assignment to constant variable
Before 2015, when the ECMAScript 2015 wasn't released yet, only the var keyword was available to create a variable in JavaScript.
In the paragraph 14.3.2 Variable Statement of ECMAScript standard the following is stated:
A var statement declares variables scoped to the running execution context's VariableEnvironment. Var variables are created when their containing Environment Record is instantiated and are initialized to undefined when created. Within the scope of any VariableEnvironment a common BindingIdentifier may appear in more than one VariableDeclaration but those declarations collectively define only one variable. A variable defined by a VariableDeclaration with an Initializer is assigned the value of its Initializer's AssignmentExpression when the VariableDeclaration is executed, not when the variable is created.
I again explain it sentence by sentence.
A var statement declares variables scoped to the running execution context's VariableEnvironment.
This means that variables declared with the var keyword are either function-scoped if declared inside a function or global-scoped if declared outside any function.
let condition = true
if (condition) {
var globalVariable = 'This is a global variable'
}
console.log(globalVariable ) // This is a global variable
function outerFunction() {
// Outer Function Execution Context
var outerVariable = 'This is an outer variable'
}
outerFunction()
// Global Execution Context
{
// Environment Record
{
identifier: 'condition'
value: true
}
{
identifier: 'globalVariable'
value: 'This is a global variable'
}
{
identifier: 'outerFunction'
value: Function
}
[[OuterEnv]]: null
}
// Outer Function Execution Context
{
// Environment Record
{
identifier: 'outerVariable'
value: 'This is an outer variable'
}
[[OuterEnv]]: Global Execution Context
}
Var variables are created when their containing Environment Record is instantiated and are initialized to undefined when created.
During the Creation Phase of the Execution Context variables are assigned the undefined value. The process of assigning the undefined to a variable during the Creation Phase is often referred to as "hoisting" or declaration hoisting. It is worth mentioning that the terms "hoisting" or declaration hoisting are not included in the standard. However, it is a convention used by many developers to explain the availability of variables "before" they were declared.
console.log(globalVariable) // undefined
var globalVariable = 'This is a global variable'
// Global Execution Context Creation Phase
{
// Environment Record
{
identifier: 'globalVariable'
value: undefined
}
[[OuterEnv]]: null
}
Sometimes, it is explained that the code example above is possible because variables declared with the var keyword are "moved" to the top of the scope. However, nothing is moved anywhere; it is only possible by assigning the undefined value to the variable during the Creation Phase of Execution Context.
Within the scope of any VariableEnvironment a common BindingIdentifier may appear in more than one VariableDeclaration but those declarations collectively define only one variable.
BindingIdentifier is a more specific type of the Identifier. We used the Identifier term before to explain the name of a variable. While Identifier also refers to the variable's name, BindingIdentifier is only used in the context of the declaration of variables (function or other data structure).
let variable = 42 // BindingIdentifier console.log(variable ) // Identifier
Now, let's go back to explaining the sentence's meaning.
BindingIdentifier may appear in more than one VariableDeclaration
In the same scope, we can create multiple variables with the same name using the var keyword, whilst all these "variables" reference only one variable.
var variable = 42
var variable = 66
var variable = 2015
// Execution context
{
// Environment Record
{
identifier: 'variable '
value: 2015
}
[[OuterEnv]]: null
}
It may appear we declared three variables with the BindingIdentifier variable, but we just reassigned the original variable variable twice. First, we reassigned it from 42 to 66, then from 66 to 2015
A variable defined by a VariableDeclaration with an Initializer is assigned the value of its Initializer's AssignmentExpression when the VariableDeclaration is executed, not when the variable is created.
The variable's value (Initializer) is assigned to it during the Execution Phase, not the Creation Phase of the Execution Context. Variables declared with the let and const keywords behave identically.
var variable = 42
// Global Execution Context Creation Phase
{
// Environment Record
{
identifier: variable
value: undefined
}
[[OuterEnv]]: null
}
// Global Execution Context Execution Phase
{
// Environment Record
{
identifier: variable
value: 42
}
[[OuterEnv]]: null
}
To sum up the article, I would like to highlight the following differences:
The first difference between variables created with var, let, and const keywords is how they are scoped. Variables created with let and const are scoped to the LexicalEnvironment, meaning they are available in the Environment Record of a block, function, or the Global Execution Context. In contrast, variables created with var are scoped to the VariableEnvironment, meaning they are only available in the Environment Record of a function or the Global Execution Context.
During the Execution Context's Creation Phase, variables created with let and const are uninitialised, whilst var variables are assigned the undefined value. The state of let and const being uninitialised is sometimes referenced as a Temporal Dead Zone or TDZ. Also, the behaviour of var being assigned the undefined value is usually known as “hoisting”.
Variables created with let and var keywords are assigned the undefined value if Initializer is not provided. Meanwhile, const variables must always have Initializer.
var キーワードを使用して作成された変数は、すべて同じ変数を参照するため、重複した名前を持つことができます。ただし、let 変数と const 変数に重複した名前を付けることはできません。重複した名前を付けると、構文エラーが発生します。
let および var キーワードを使用して作成された変数は、初期のイニシャライザ (値) を別のイニシャライザ (値) に再割り当てできます。ただし、const 変数には Initializer を再割り当てすることはできません。
以上がECMAScript 標準のプリズムによる var、let、const の違い。の詳細内容です。詳細については、PHP 中国語 Web サイトの他の関連記事を参照してください。
![[Web フロントエンド] Node.js クイック スタート](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
