open()関数は主にファイル処理に使用され、一般に次の3つのプロセスに分かれています:
1.ファイルを開きます
2.ファイルを操作します
3. ファイルを閉じます
一般的な形式の例:
f = open('note.txt','r') f.read() f.close()
文件句柄 = open('文件路径','模式')
一般的なモードは次のとおりです:
1.'r'、読み取り専用
2.'w' 、書き込み専用 (開いているファイルに対して書き込み専用操作を実行すると、ファイルの元の内容がクリアされるため、バックアップを作成してください)
3.'a'、追加
「+」は、ファイルは同時に読み書きできます
1.'r+'
2.'w+'
3.'a+'
「b」はバイナリファイルの処理を意味します
1.'rb' ,'rb+'
2.'wb','wb+'
3 .'ab','ab+'
「U」は、読み取り時に r n rn を n に自動的に変換できることを意味します (r またはr+ モード)
1.'rU'
class file(object)
def close(self): # real signature unknown; restored from __doc__
关闭文件
"""
close() -> None or (perhaps) an integer. Close the file.
Sets data attribute .closed to True. A closed file cannot be used for
further I/O operations. close() may be called more than once without
error. Some kinds of file objects (for example, opened by popen())
may return an exit status upon closing.
"""
def fileno(self): # real signature unknown; restored from __doc__
文件描述符
"""
fileno() -> integer "file descriptor".
This is needed for lower-level file interfaces, such os.read().
"""
return 0
def flush(self): # real signature unknown; restored from __doc__
刷新文件内部缓冲区
""" flush() -> None. Flush the internal I/O buffer. """
pass
def isatty(self): # real signature unknown; restored from __doc__
判断文件是否是同意tty设备
""" isatty() -> true or false. True if the file is connected to a tty device. """
return False
def next(self): # real signature unknown; restored from __doc__
获取下一行数据，不存在，则报错
""" x.next() -> the next value, or raise StopIteration """
pass
def read(self, size=None): # real signature unknown; restored from __doc__
读取指定字节数据
"""
read([size]) -> read at most size bytes, returned as a string.
If the size argument is negative or omitted, read until EOF is reached.
Notice that when in non-blocking mode, less data than what was requested
may be returned, even if no size parameter was given.
"""
pass
def readinto(self): # real signature unknown; restored from __doc__
读取到缓冲区，不要用，将被遗弃
""" readinto() -> Undocumented. Don't use this; it may go away. """
pass
def readline(self, size=None): # real signature unknown; restored from __doc__
仅读取一行数据
"""
readline([size]) -> next line from the file, as a string.
Retain newline. A non-negative size argument limits the maximum
number of bytes to return (an incomplete line may be returned then).
Return an empty string at EOF.
"""
pass
def readlines(self, size=None): # real signature unknown; restored from __doc__
读取所有数据，并根据换行保存值列表
"""
readlines([size]) -> list of strings, each a line from the file.
Call readline() repeatedly and return a list of the lines so read.
The optional size argument, if given, is an approximate bound on the
total number of bytes in the lines returned.
"""
return []
def seek(self, offset, whence=None): # real signature unknown; restored from __doc__
指定文件中指针位置
"""
seek(offset[, whence]) -> None. Move to new file position.
Argument offset is a byte count. Optional argument whence defaults to
(offset from start of file, offset should be >= 0); other values are 1
(move relative to current position, positive or negative), and 2 (move
relative to end of file, usually negative, although many platforms allow
seeking beyond the end of a file). If the file is opened in text mode,
only offsets returned by tell() are legal. Use of other offsets causes
undefined behavior.
Note that not all file objects are seekable.
"""
pass
def tell(self): # real signature unknown; restored from __doc__
获取当前指针位置
""" tell() -> current file position, an integer (may be a long integer). """
pass
def truncate(self, size=None): # real signature unknown; restored from __doc__
截断数据，仅保留指定之前数据
"""
truncate([size]) -> None. Truncate the file to at most size bytes.
Size defaults to the current file position, as returned by tell().
"""
pass
def write(self, p_str): # real signature unknown; restored from __doc__
写内容
"""
write(str) -> None. Write string str to file.
Note that due to buffering, flush() or close() may be needed before
the file on disk reflects the data written.
"""
pass
def writelines(self, sequence_of_strings): # real signature unknown; restored from __doc__
将一个字符串列表写入文件
"""
writelines(sequence_of_strings) -> None. Write the strings to the file.
Note that newlines are not added. The sequence can be any iterable object
producing strings. This is equivalent to calling write() for each string.
"""
pass
def xreadlines(self): # real signature unknown; restored from __doc__
可用于逐行读取文件，非全部
"""
xreadlines() -> returns self.
For backward compatibility. File objects now include the performance
optimizations previously implemented in the xreadlines module.
"""
pass
Python 2.xrreee
3 操作ファイル事実、共通の操作はほんのわずかです:
class TextIOWrapper(_TextIOBase):
"""
def close(self, *args, **kwargs): # real signature unknown
关闭文件
pass
def fileno(self, *args, **kwargs): # real signature unknown
文件描述符
pass
def flush(self, *args, **kwargs): # real signature unknown
刷新文件内部缓冲区
pass
def isatty(self, *args, **kwargs): # real signature unknown
判断文件是否是同意tty设备
pass
def read(self, *args, **kwargs): # real signature unknown
读取指定字节数据
pass
def readable(self, *args, **kwargs): # real signature unknown
是否可读
pass
def readline(self, *args, **kwargs): # real signature unknown
仅读取一行数据
pass
def seek(self, *args, **kwargs): # real signature unknown
指定文件中指针位置
pass
def seekable(self, *args, **kwargs): # real signature unknown
指针是否可操作
pass
def tell(self, *args, **kwargs): # real signature unknown
获取指针位置
pass
def truncate(self, *args, **kwargs): # real signature unknown
截断数据，仅保留指定之前数据
pass
def writable(self, *args, **kwargs): # real signature unknown
是否可写
pass
def write(self, *args, **kwargs): # real signature unknown
写内容
pass
Python 3.xファイルの内容を切り詰めるために使用される
、ファイルの内容が切り詰められる前の内容のみを保持する という関数もあります。これは理解するのが簡単ではありません。例は次のとおりです: f.read(3) # python2中表示指定读取3个字节，python3中表示指定读取3个字符！
f.readline() # 读取文件内容中的一行
f.readlines() # 自动将文件内容解析为一个< 行的列表 >，可以用 for line in f.readlines(): 处理
f.write('helloPython')
f.seek(9) # 按照字节来执行，用来指定当前文件指针位置,seek(0)表示文件指针移到文件头，seek(0,2)指向文件尾，便于追加内容
f.tell() # 是按照字节来执行的，用来查看当前指针位置
の try、excel、finally キーワードをすべて削除することと、リソースの割り当てと解放に関連するコードを削除することにより、記述されるコードの量を削減し、より多くのコードを作成することです。簡潔！ 例:
f = open('test.log','r+',encoding='utf-8') # encoding='utf-8'，有处理汉字的时候这样用 f.seek(9) # 原文件内容是‘小苹果helloPython’ f.truncate() #执行truncate()后，仅保留原文件截断之前的内容，这里即为‘小苹果’ f.close()
は次と同等です:
with open('name.txt', 'w') as f:
f.write('Somebody^Fancy1')以上がPythonのファイル操作方法の紹介の詳細内容です。詳細については、PHP 中国語 Web サイトの他の関連記事を参照してください。
![[Web フロントエンド] Node.js クイック スタート](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
