1. It may be due to computer system problems. You can try to reset it in BIOS mode.
2. The editor will now introduce to you the reasons: Reason 1: Have you reinstalled the system on your computer? If you have reinstalled the system, it may be caused by reinstalling the system. .
3. The computer automatically enters the bios as soon as it is turned on. The solution is as follows: Reason 1: Your BIOS battery is out of power. Solution: Just replace the battery. Reason 2: There is no floppy drive but the floppy drive is enabled.
4. The reasons for automatically entering the BIOS interface are as follows: Battery failure: You can check whether the system time is accurate on the BIOS interface. If it is not accurate, it can be judged that the motherboard battery has failed, causing the computer to call the BIOS default parameters. If the hardware environment of the machine does not match, the computer cannot start normally.
5. Enter the menu through the arrow keys, select the option through the arrow keys, set it to "Enabled", click F10 to save the settings, and try restarting the computer.
6. The solution to automatically enter the bios interface when the computer is turned on is as follows: Tools/Materials: ASUS computer (LAPTOP-NITROJRK), Windows 7 64-bit Home Edition, bios. First, enter the bios selection interface, and then press the Tab key. . Then select Setup under App Menu and press enter to enter bios.
1. Restart the laptop and press esc or f8 to enter the BIOS settings, change the bios to Simplified Chinese, and then press F7 to enter advanced model. After entering advanced mode, press the → arrow key to move to the startup options, select the secure boot menu, and then press Enter to enter key management and clear the key to turn off secure boot.
2. First, click Shut Down or Restart in the Windows menu. Secondly, wait for the computer to enter the startup interface. Press the F2 key on your keyboard until you enter the BIOS setup screen. Once in the BIOS, use the arrow keys to select an option and press Enter.
3. Press the F2 key on the ASUS motherboard to enter the BIOS. Method: Hold down the shift key and select Shut Down. When the computer starts, immediately press F2 on the keyboard. After successfully entering the bios setting screen, you can use the keyboard direction keys to control the movement of the cursor, the Enter key to perform the "OK" operation, and "Esc" to return to the exit operation.
1. Restart the notebook and press esc or f8 to enter the BIOS settings, change the bios to Simplified Chinese, and then press F7 to enter the advanced mode. After entering advanced mode, press the → arrow key to move to the startup options, select the secure boot menu, and then press Enter to enter key management and clear the key to turn off secure boot.
2. For ASUS notebooks, after pressing the power button, press the F2 key. Release the F2 key after seeing the BIOS screen: BIOS screen diagram: BIOS is the abbreviation of the English Basic Input Output System, literal translation After coming here, the Chinese name is Basic Input and Output System.
3. Press the F2 key on the ASUS motherboard to enter the BIOS. Method: Hold down the shift key and select Shut Down. When the computer starts, immediately press F2 on the keyboard. After successfully entering the bios setting screen, you can use the keyboard direction keys to control the movement of the cursor, the Enter key to perform the "OK" operation, and "Esc" to return to the exit operation.
The first situation: The system file is changed, causing it to fail to start. At this time, you only need to turn off safe boot in the bios and enable compatibility mode.
The first reason is that the motherboard BIOS is messed up due to unknown reasons, causing the settings to be confused, the startup items are wrong, the hard disk cannot be recognized, and the system cannot be entered. This phenomenon generally occurs: You can handle it like this: press DEL to enter the BIOS, select LoadOptimizedDefaults, and F10 to save and exit.
The editor will now introduce to you the reasons: Reason 1: Have you reinstalled the system on your computer? If you have reinstalled the system, it may be caused by reinstalling the system.
It may be due to computer system problems, you can try to reset it in bios mode.
The first reason is that the motherboard BIOS is messed up due to unknown reasons, causing the settings to be confused, the startup items are wrong, the hard disk cannot be recognized, and the system cannot be entered. This phenomenon generally occurs: You can handle it like this: press DEL to enter the BIOS, select Load Optimized Defaults, and F10 to save and exit.
The first reason is that the motherboard BIOS is messed up due to unknown reasons, causing the settings to be confused, the startup items are wrong, the hard disk cannot be recognized, and the system cannot be entered. In most cases, entering the bios upon booting is due to the fact that the hard disk cannot be detected.
Enter the BIOS setting page and restore the BIOS settings. Enter the [Save & Exit] page ①, select [Restore Defaults] ② and select [Yes] ③. Confirm whether the boot hard drive is correct.
Your BIOS battery is dead. Solution: Just replace the battery. There is no floppy drive but the floppy drive is enabled.
Enter BIOS, set Security-Secure Boot Control to Disabled, Boot-Launch CSM to Enabled, press F10 to save and restart.
Disabled" 2. 矢印キーを使用してメニューに入り、矢印キーを使用してオプションを選択し、「有効」に設定し、F10 をクリックして設定を保存すると、マシンが自動的に再起動します。それが無効であるか、BIOS が無効である場合は、マシンが自動的に再起動します。は変更をサポートしていません。ハードディスクを GPT フォーマットに変更し、uefi ブートをサポートする 64 ビット オペレーティング システムをインストールしてください。
システムを再インストールして、最初のブート オプションを選択するにはどうすればよいですか?システムをインストールするためのハード ディスクが機能しない場合は、ブート ディスク (U ディスクなど) を使用して PE を起動し、修復してみてください。システムの元のインストール バージョン
さらに、コンピュータがシステムに起動するときにエラーが発生した可能性があります (つまり、コンピュータが起動ハードディスクを認識しません)。解決策: 1. BIOS で起動オプションを設定し、ハード ディスクが見つかるかどうかを確認します。見つかった場合は、ハード ディスクを最初のブートに変更します。
コンピュータのハードドライブが故障し、コンピュータが認識できない場合、コンピュータは自動的に BIOS に入ります。 入った後、赤いボックスの最初のオプションを選択します。矢印で示された赤いボックスで boot-option1 を選択し、Enter キーを押します。
コンピュータ システムの問題が原因である可能性があります。BIOS モードでリセットしてみてください
理由 3:解決策: BIOS のデフォルト値を復元するだけです。コンピューターの電源を入れるか再起動し、DEL キーを押したまま BIOS に入り、矢印キーを押して選択します。 Enter を押します。確認を求められたら、 Y を押し、Enter を押します。最後に、「Save&exitstep」を選択して上記の手順を保存します。以上がASUS ノートブックに BIOS を入力するの詳細内容です。詳細については、PHP 中国語 Web サイトの他の関連記事を参照してください。
![[Web フロントエンド] Node.js クイック スタート](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
