©
このドキュメントでは、 php中国語ネットマニュアル リリース
(PECL ssh2 >= 0.9.0)
ssh2_auth_pubkey_file — Authenticate using a public key
$session
, string $username
, string $pubkeyfile
, string $privkeyfile
[, string $passphrase
] )Authenticate using a public key read from a file.
session
An SSH connection link identifier, obtained from a call to ssh2_connect() .
username
pubkeyfile
The public key file needs to be in OpenSSH's format. It should look something like:
ssh-rsa AAAAB3NzaC1yc2EAAA....NX6sqSnHA8= rsa-key-20121110
privkeyfile
passphrase
If privkeyfile
is encrypted (which it should
be), the passphrase
must be provided.
成功时返回 TRUE
, 或者在失败时返回 FALSE
。
Example #1 Authentication using a public key
<?php
$connection = ssh2_connect ( 'shell.example.com' , 22 , array( 'hostkey' => 'ssh-rsa' ));
if ( ssh2_auth_pubkey_file ( $connection , 'username' ,
'/home/username/.ssh/id_rsa.pub' ,
'/home/username/.ssh/id_rsa' , 'secret' )) {
echo "Public Key Authentication Successful\n" ;
} else {
die( 'Public Key Authentication Failed' );
}
?>
Note:
The underlying libssh library doesn't support partial auths very cleanly That is, if you need to supply both a public key and a password it will appear as if this function has failed. In this particular case a failure from this call may just mean that auth hasn't been completed yet. You would need to ignore this failure and continue on and call ssh2_auth_password() in order to complete authentication.
[#1] nerak-spelled-backwards at modo dot coop [2013-01-10 17:49:44]
This function has a known bug (https://bugs.php.net/bug.php?id=58573) under some Linux installations: you can't encrypt your private key if you've compiled libssh2 using libgcrypt. According to the bug page, the solution is to rebuild libssh2 with OpenSSL. (Or don't encrypt your private key, but that seems irresponsible somehow.)
This isn't a bug report -- the bug is apparently already being fixed -- but a note for others, because it took me at least an hour of Googling to realize the problem wasn't with my own code.
[#2] christian at cvj dot se [2012-01-03 04:21:39]
On my linux debian server running php communicating with another linux debian server I had problems getting rsa to work. dsa worked out of the box. I got it to work by doing the following in terminal
* ssh-keygen -t rsa
.... PUBFILE
* ssh-keygen -f PUBFILE -e
OUTPUT
id_rsa.pub =
ssh-rsa OUTPUT [COMMENT]
[#3] max [2011-09-16 04:37:07]
Well, you have to format the publickey with the following command:
# ssh-keygen -f id_rsa.pub -i
Output: "ssh-rsa <YOURKEYDATA>"
That worked fine for me.
[#4] anjo2 [2011-05-11 20:49:37]
rsa keys may don't work, using dsa keys are more compatible
Linux:
ssh-keygen -t dsa
cat ~/.ssh/id_dsa.pub >> ~/.ssh/authorized_keys
chmod 700 ~/.ssh/
chmod -R 600 ~/.ssh/*
PHP:
<?php
$methods = array(
'kex' => 'diffie-hellman-group1-sha1',
'hostkey' => 'ssh-dss',
'client_to_server' => array(
'crypt' => '3des-cbc',
'mac' => 'hmac-md5',
'comp' => 'none'),
'server_to_client' => array(
'crypt' => '3des-cbc',
'mac' => 'hmac-md5',
'comp' => 'none'));
$connect = ssh2_connect('127.0.0.1', 22, $methods);
if(ssh2_auth_pubkey_file($connect, 'username', '~/.ssh/id_dsa.pub', '~/.ssh/id_dsa'))
{
echo "Public Key Authentication Successful\n";
}
else
{
echo "Public Key Authentication Failed\n";
}
?>
[#5] deepakssn@gmailcom [2010-05-19 16:12:27]
Setting up public key authentication:
1. Login to the unix server you want to connect using putty.
2. mkdir .ssh (there is a dot before ssh)
3. cd .ssh
4. ssh-keygen -t rsa mykey
5. Enter passphrase as test
6. ls -al -> you will find two files mykey , mykey.pub
7. cat mykey.pub >>authorized_keys
8. cat mykey
9. Copy what you get on screen to notepad and save it as "c:\mykey" (within quotes)
10. cat mykey.pub
11. Copy what you get on screen to notepad and save it as "c:\mykey.pub" (within quotes)
<?php
function my_ssh_disconnect($reason, $message, $language)
{
printf("Server disconnected with reason code [%d] and message: %s\n", $reason, $message);
}
//Open a connection forcing 3des-cbc when sending packets, any strength aes cipher when receiving packets, no compression in either direction, and Group1 key exchange.
$methods = array(
'kex' => 'diffie-hellman-group1-sha1',
'client_to_server' => array(
'crypt' => 'aes256-cbc',
'comp' => 'none',
'mac' => 'hmac-sha1'),
'server_to_client' => array(
'crypt' => 'aes256-cbc',
'comp' => 'none',
'mac' => 'hmac-sha1'));
$callbacks = array('disconnect' => 'my_ssh_disconnect');
// Function to run a command on the unix server
function run_cmd($ssh_host, $user_name, $keyfilename, $ssh_command)
{
$connection = ssh2_connect($ssh_host, 22, $methods, $callbacks);
if (!$connection) die('Connection failed');
if (ssh2_auth_pubkey_file($connection, $user_name, $keyfilename.".pub", $keyfilename, 'test'))
{
echo "Public Key Authentication Successful as user: $user_name";
}
else
{
die('Public Key Authentication Failed');
}
$stream = ssh2_exec($connection, $ssh_command);
$i=0;
stream_set_blocking($stream, true);
$line = stream_get_line($stream, 1024, "\n");
while (!feof($stream))
{
echo $line.' ';
$line = stream_get_line($stream, 1024, "\n");
$i++;
}
echo "Count : ".$i;
flush();
unset($stream);
}
function my_ssh_disconnect($reason, $message, $language)
{
printf("Server disconnected with reason code [%d] and message: %s\n",
$reason, $message);
}
// Main Code
$user_name = "USERID";
$keydir = "c:\\";
$search_string = 'needle';
$keyfilename= $keydir.'mykey';
$ssh_host = "foo.bar.com";
$ssh_command = 'grep "'.$search_string.'" /haystack/*.log';
run_cmd($ssh_host, $user_name, $keyfilename, $ssh_command);
$ssh_command = 'ls -al';
run_cmd($ssh_host, $user_name, $keyfilename, $ssh_command);
?>
[#6] gramo dot gnu at gmail dot com [2009-10-29 15:26:46]
I had an anoyiing problem with this function, everytime I tried to make it run it responds with an
Authentication failed for <user> using public key
but when I try directly to connect to the server using
ssh <user>@<domain>
Things works fine...
After lots of intents I realize that local files were read protected from user apache (they were stored at /home/<user>/.ssh directory)
So, if you also have this problem, just make a new directory into a place where apache can read and place there the keys.
The whole thing I do is as follows (Linux & Apache both server and client):
First I create a directory where apache can read
mkdir ~/.newssh_keys
chmod 777 ~/.newssh_keys
(This is a security issue, so maybe you need to realize how to make it safer.)
Then I create keys into local server choosing ~/.newssh_keys/id_dsa as the file to save the key:
ssh-keygen -t dsa
...
Enter file in which to save the key (/home/<user>/.ssh/id_dsa): ~/.newssh_keys/id_dsa
...
Then I have to change permissions to private key
(This is a security issue, so maybe you need to realize how to make it safer.)
chmod 644 ~/.newssh_keys/id_dsa
I copy the public key into the server's .ssh directory
client$ scp id_dsa.pub <remoteuser>@<server_domain>:~/.ssh/
and then I connect myself to the server using traditional ssh in order to append the public key at the end of authorized_keys2 file
server$ cat ~/.ssh/id_dsa.pub >> ~/.ssh/authorized_keys2
and remove the public key in order to be clean
server$ rm ~/.ssh/id_dsa.pub
Finally I use this code into my php script
<?php
// This in order to be sure apache can read public key
// (remove this after debug)
$pub_key = file_get_contents('~/.newssh_keys/id_dsa.pub');
print "<pre>";
var_export($pub_key);
print "</pre>";
// This in order to check private one
// (remove this after debug)
$prv_key = file_get_contents('~/.newssh_keys/id_dsa');
print "<pre>";
var_export($prv_key);
print "</pre>";
// Finally the connection code
$connection = ssh2_connect('<server_domain>', 22, array('hostkey', 'ssh-dss'));
if (ssh2_auth_pubkey_file($connection, '<server_user>',
'~/.newssh_keys/id_dsa.pub',
'~/.newssh_keys/id_dsa')) {
echo "Public Key Authentication Successful\n";
} else {
echo "Public Key Authentication Failed";
}
?>
[#7] tekiedude at gmail dot com [2007-07-31 13:45:13]
This is probably incredibly insecure but if you are in a closed environment, you can run it at your own risk.
I was trying to get ssh access from server A to server B but server A was running apache as 'apache' and
I needed files on server B that were owned by root. So I needed some way for the apache user to connect
to server B as root. Here's what I did (both servers running linux - specifically CentOS4):
1. ssh-keygen -t rsa -f id_rsa generate with no passphrase
2. append the id_rsa.pub file to server B /root/.ssh/authorized_keys2
3. copy the id_rsa and id_rsa.pub files to a directory like /var/www/.ssh/
(happens to be apache's home dir on CentOS)
4. chown -R apache.apache /var/www/.ssh
Then you can connect like this:
$connection = ssh2_connect($server,22,array('hostkey'=>'ssh-rsa'));
if (ssh2_auth_pubkey_file($connection,'root',
'/var/www/.ssh/id_rsa.pub',
'/var/www/.ssh/id_rsa')) {
echo "success!";
}
else
{
echo "no success :-(";
}