©
このドキュメントでは、 php中国語ネットマニュアル リリース
(PHP 5 >= 5.0.1)
SoapVar::SoapVar — SoapVar constructor
$data
, string $encoding
[, string $type_name
[, string $type_namespace
[, string $node_name
[, string $node_namespace
]]]] )Constructs a new SoapVar object.
data
The data to pass or return.
encoding
The encoding ID, one of the XSD_... constants.
type_name
The type name.
type_namespace
The type namespace.
node_name
The XML node name.
node_namespace
The XML node namespace.
Example #1 SoapVar::SoapVar() example
<?php
class SOAPStruct {
function SOAPStruct ( $s , $i , $f )
{
$this -> varString = $s ;
$this -> varInt = $i ;
$this -> varFloat = $f ;
}
}
$client = new SoapClient ( null , array( 'location' => "http://localhost/soap.php" ,
'uri' => "http://test-uri/" ));
$struct = new SOAPStruct ( 'arg' , 34 , 325.325 );
$soapstruct = new SoapVar ( $struct , SOAP_ENC_OBJECT , "SOAPStruct" , "http://soapinterop.org/xsd" );
$client -> echoStruct (new SoapParam ( $soapstruct , "inputStruct" ));
?>
[#1] Francesco Nardone [2014-03-26 13:50:38]
I spent hours trying to find how to send a request where an element is repeated. Here is how I managed to do it:
<?php
$parm = array();
$parm[] = new SoapVar('123', XSD_STRING, null, null, 'customerNo' );
$parm[] = new SoapVar('THIS', XSD_STRING, null, null, 'selection' );
$parm[] = new SoapVar('THAT', XSD_STRING, null, null, 'selection' );
$resp = $client->getStuff( new SoapVar($parm, SOAP_ENC_OBJECT) );
?>
This will send something like:
<getStuff>
<customerNo>123</customerNo>
<selection>THIS</selection>
<selection>THAT</selection>
</getStuff>
Hope this will save someone else's time.
[#2] it at teamamericany dot com [2013-07-19 21:13:35]
To send requests containing ComplexTypes we needed to create stdClass objects for each ComplexType. If the ComplexType has an attribute we created a class with all the fields and attributes as members and added this class to the classmap with the correct type name from the wsdl. For example:
//to create soap client
$soapClient = new SoapClient("<your wsdl url>",
array('classmap' => array('RoomType' => 'RoomType'), 'trace' => 1));
//creating request object using custom class since there is an attribute needed
class RoomType {
//attribute
var $code;
var $name;
}
$RoomType = new RoomType();
$RoomType->code = $code;
//plain stdClass is ok since no attributes defined
$LRoomCode = new stdClass();
$LRoomCode->RoomType = new SoapVar($RoomType, SOAP_ENC_OBJECT, "RoomType", "<your namespace url from wsdl>");
//define a basic class object since attributes are not needed for this complex type
$RateAvailabilityReq = new stdClass();
$RateAvailabilityReq->LRoomCode = new SoapVar($LRoomCode, SOAP_ENC_OBJECT, "ArrayOfRoomType", "<your namespace url>");
$RateAvailabilityReq->idB2BHotel = $idB2BHotel;
$RateAvailabilityReq->idProduct = $idProduct;
$RateAvailabilityReq->lenght = $lenght;
$RateAvailabilityReq->nameDistributor = $nameDistributor;
$RateAvailabilityReq->password = $password;
$RateAvailabilityReq->propertyCode = $propertyCode;
$RateAvailabilityReq->startDate = $startDate;
$RateAvailabilityReq->userName = $userName;
$RateUpdateReqType = new SoapVar($RateAvailabilityReq , SOAP_ENC_OBJECT, "RateAvailabilityReq", "<your namespace url>");
$soapRequestType = new stdClass();
$soapRequestType->in0 = $RateUpdateReqType;
$getRateAvailabilityReq = new SoapVar($soapRequestType , SOAP_ENC_OBJECT, "getRateAvailability", "<your namespace url>");
$result = $soapClient->getRateAvailability($getRateAvailabilityReq);
Reading attributes from ComplexType response objects also required a custom class added to the classmap array with the attribute as a member of the class.
[#3] Joni Lindqvist [2012-10-25 08:49:22]
I worked for hours to figure out how to create following structure:
<ns:Foo attr='bar'>
<ns:Baz attr='foobar'>barbaz</ns:Baz>
</ns:Foo>
It can be done with following array structure:
$arr = array(
'Foo' => array(
'attr'=>'bar',
'Baz'=>array( '_' => 'barbaz', 'attr'=>'foobar')
)
);
[#4] tcell [2012-02-29 18:53:19]
One potential gotcha with this is that if the XML you are passing in has the <?xml... declaration, it may cause problems on the server side. It's best to strip this out with str_replace.
[#5] Krzych [2010-12-03 06:54:37]
It might be obvious to some but not to everyone
if you ever wondered how to encode attribute in soap object, use proper coding and not hacking by passing xml and flag XSD_ANYXML
try using this
<?php
$amount['_'] = 25;
$amount['currencyId'] = 'GBP';
$encodded = new SoapVar($amount, SOAP_ENC_OBJECT);
?>
and end result wound be
<amount currencyId="GBP">25</amount>
hope that helps someone
[#6] cb at wasteland dot org [2009-07-02 14:01:50]
If you need to add attributes XML entities in your SOAP query like this:
"<FilterBy Column="Id" FilterOperator="=" FilterValue="NUMBER" Table="Case">"
Use SoapVar() with the type XSD_ANYXML as shown below. Example uses __soapCall and other SoapParams.
<?php
$response = $client->__soapCall('GetFilteredRecordList',
array(new SoapParam($DSToken, 'Token'),
new SoapParam('Slide', 'TableName'),
new SoapVar('<FilterBy Column="Id" FilterOperator="=" FilterValue="NUMBER" Table="Case"/>', XSD_ANYXML)),
array('soapaction' => 'http://www.example.com/webservices/GetFilteredRecordList'));
?>
Use this so you don't waste HOURS looking around:
[#7] OrionI [2005-07-11 07:30:39]
This class is useful when dealing with the "anyType" type (generic object reference): it lets you specify the xsd type to provide "late binding" type information.
Here's a really simple example: I have a .NET service that can take a string, a date, and integer, or other types, so I use the .NET "object" type. Here's an example of such a service--this one just tells me what type I passed in. (It's nice to use when checking to see if PHP passed in the type information the way .NET expects it.)
//inside a service.asmx.cs file...
[WebMethod]
public string WhatTypeIsThis(object ObjectParameter)
{
return "You passed in a " + ObjectParameter.GetType().Name
+ ": " + ObjectParamter.ToString();
}
To call this service with a string from PHP, I used this code:
<?php
//set up the service client using WSDL
$client = new SoapClient("http://localhost/folder/service.asmx?WSDL");
//This is the variable that will be typed as an XSD string
$typedVar = new SoapVar("mystring", XSD_STRING, "string", "http://www.w3.org/2001/XMLSchema");
//This is the wrapper object for incoming parameters
$wrapper->ObjectParameter = $typedVar;
//This is the named parameter object that will be passed in to the service
$params = new SoapParam($wrapper, "WhatTypeIsThis");
//call the service with the string
$result = $client->WhatTypeIsThis($params);
//show the result
echo $result->WhatTypeIsThisResult;
?>
The output from this should be:
"You passed in a String: mystring"
The SOAP message that is passed in looks like this:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:ns1="http://tempuri.org/">
<SOAP-ENV:Body>
<ns1:WhatTypeIsThis>
<ns1:ObjectParameter xsi:type="xsd:string">mystring</ns1:ObjectParameter>
</ns1:WhatTypeIsThis>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
It's that xsi:type="xsd:string" that gives .NET the heads up that though the ObjectParameter is being passed in as an object, it is also a string.
When trying other types, it's helpful to see exactly what is being sent to the service--to see the SOAP messages like the one above, use the trace option when making your SOAP client and then call the $client->__getLastRequest() function. (See http://www.php.net/soap_soapclient_getlastrequest) You may need to use try/catch constructs if you're generating errors.
Another helpful function is var_dump($client->__getTypes())--it shows how PHP parsed the WSDL file to create types to pass back and forth.