데이터 베이스 MySQL 튜토리얼 AIX6.1/11.2.0.3数据库上关于SWAP的一个BUG

AIX6.1/11.2.0.3数据库上关于SWAP的一个BUG

Jun 07, 2016 pm 04:06 PM
swap ~에 대한 데이터 베이스

昨天去南京某客户那里调优新上线的业务数据库,在查看alert.log日志时发现在过去的一段时间里,每过几个小时或间隔一段时间,就会报类以下的内容: Thu Aug 21 09:01:26 2014WARNING: Heavy swapping observed on system in last 5 mins.pct of memory swappe

昨天去南京某客户那里调优新上线的业务数据库,在查看alert.log日志时发现在过去的一段时间里,每过几个小时或间隔一段时间,就会报类似以下的内容:
Thu Aug 21 09:01:26 2014 WARNING: Heavy swapping observed on system in last 5 mins. pct of memory swapped in [8.42%] pct of memory swapped out [2.16%]. Please make sure there is no memory pressure and the SGA and PGA are configured correctly. Look at DBRM trace file for more details.
Thu Aug 21 14:56:27 2014 WARNING: Heavy swapping observed on system in last 5 mins. pct of memory swapped in [5.40%] pct of memory swapped out [8.63%]. Please make sure there is no memory pressure and the SGA and PGA are configured correctly. Look at DBRM trace file for more details.
......
Sat Oct 18 22:13:48 2014 WARNING: Heavy swapping observed on system in last 5 mins. pct of memory swapped in [7.76%] pct of memory swapped out [0.33%]. Please make sure there is no memory pressure and the SGA and PGA are configured correctly. Look at DBRM trace file for more details.
客户的环境是IBM P570,AIX 6.1,安装了Oracle 11.2.0.3单实例数据库,物理内存64G,仅仅分配了20G给SGA,采用memory自动管理
查阅了一下MOS,发现是AIX平台上的一个bug,相关文档为:[1508575.1]
对应的数据库和平台:
Oracle Database - Enterprise Edition - Version 11.2.0.3 to 11.2.0.3 [Release 11.2] IBM AIX on POWER Systems (64-bit)
症状:

There is new warning message in alert.log in 11.2.0.3 similar to

WARNING: Heavy swapping observed on system in last 5 mins.
pct of memory swapped in [2.08%] pct of memory swapped out [0.12%].
Please make sure there is no memory pressure and the SGA and PGA
are configured correctly. Look at DBRM trace file for more details.

On AIX platform this message can be seen even when there is no virtual memory swapping at all. --物理内存足够,而且根本没有使用swap交换空间

You may compare the vmstat from AIX level with DBRM trace file entries to see the differences.


原因:

The issue is caused by unpublished Bug:14731911.

Swap usage messages are based on statistics that do not reflect the actual usage.

The v$osstat does not reflect proper stats for the swap space paging.

解决方法:

Apply Patch:11801934 on top of your IBM AIX on POWER Systems (64-bit) platform.

P.S: Bug is port-specific. --这个bug是针对端口指定的平台的

The issue is fixed in patchset 11.2.0.4 and release 12.1. --说是在12.1的patch中修复了,但实际上12.1还是会有这个问题,会有ora-700错误,详见文档:[ID 1919850.1]

来看一下BUG:14731911的描述:

Bug 属性


B - Defect
2 - Severe Loss of Service 11.2.0.3
96 - Closed, Duplicate Bug 212 - IBM AIX on POWER Systems (64-bit)
2012-10-8
2014-10-11 11801934
11.2.0.3 Port-Specific
Oracle 与此 Bug 相关的知识, 补丁程序和 Bug
\

相关产品


Oracle Database Products Oracle Database Suite
Oracle Database 5 - Oracle Database - Enterprise Edition
\
Hdr: 14731911 11.2.0.3 RDBMS 11.2.0.3 VOS PRODID-5 PORTID-212 11801934
Abstract: FALSE SWAP WARNING MESSAGES PRINTED TO ALERT.LOG ON AIX
 
*** 10/08/12 04:52 am ***
  
  
  BUG TYPE CHOSEN
  ===============
  Code
  
  SubComponent: Virtual Operating System
  ======================================
  DETAILED PROBLEM DESCRIPTION
  ============================
  Oracle process seems to check wrong OS local statistic (which include also
  FILESYSTEM caching etc.)
  
  Alert log shows WARNING: Heavy swapping observed on system in last 5 mins.
  pct of memory swapped in [2.08%] pct of memory swapped out [0.12%].
  Please make sure there is no memory pressure and the SGA and PGA 
  are configured correctly. Look at DBRM trace file for more details.
  
  but this is not reflected at OS level.
  
  DIAGNOSTIC ANALYSIS
  ===================
  1. nmon shows virtual memory swapping does not occur at all - see attached file --nmon根本没有监控到swap动作
  
  2. Oracle Database Server is 11.2.0.3 and contains fix for 10220118
  
  3. Server configuration
  real mem: 144GB
  lowest value of fre memory : 87,65 GB --剩余内存充足
  
  4. DBRM seems to use a wrong OS statistics - trace file is attached
  
  WORKAROUND?
  ===========
  No
  
  TECHNICAL IMPACT
  ================
  Wrong diagnostic analyze.
  Message is bothering customer's DBA when in fact the warning message is
  misleading
  
  RELATED ISSUES (bugs, forums, RFAs)
  ===================================
  http://myforums.oracle.com/jive3/thread.jspa?threadID=1104581 
  10220118
  
  HOW OFTEN DOES THE ISSUE REPRODUCE AT CUSTOMER SITE?
  ====================================================
  Always
  
  DOES THE ISSUE REPRODUCE INTERNALLY?
  ====================================
  No
  
  EXPLAIN WHY THE ISSUE WAS NOT TESTED INTERNALLY.
  ================================================
  Unavailable Data Volume
  
  IS A TESTCASE AVAILABLE?
  ========================
  No
  
  Link to IPS Package:
  ====================
  not available
로그인 후 복사

DBRM(Database Resource Manager)是11gR2中新特性中出现的后台进程,会在alert.log告警日志中反映OS操作系统最近5分钟是否有剧烈的swap活动,而在AIX平台上,由于BUG:14731911的存在,oracle的这个进程谎报了内存进行了swapin和swapout动作。我们知道,只有当物理内存真的不够用的情况下,才会去用swap(通常会配置成物理内存的2倍),而swap是非常耗费性能的(从物理磁盘读写)。但是个人认为这个bug的危害性并不大,仅仅只是在alert.log日志中报了一个WARNING,并没有因为这个影响导致对数据库更加负面的影响,因此是否打补丁到11.2.0.4就见仁见智了,如果想让alert.log平安无事,那么就可以升级一下patch。当然了,如果真的是因为OS内存吃紧造成的swap动作,就要区别对待了,因为此时的确会对数据库造成严重影响。要区分是否真的内存不足而非系统误报,那么主要还是通过nmon,topas,vmstat等监控工具来进行分析(linux下还可以用free监控)

对于AIX平台,其实还有另一个bug,只不过是unpublished base bug,而不是port-specific bug

AIX Platform

If your Platform is IBM-AIX then this is not the only possible reason for this alert log message.
For IBM AIX on POWER Systems (64-bit), there is also next known port-specific bug:
Bug 14731911 - FALSE SWAP WARNING MESSAGES PRINTED TO ALERT.LOG ON AIX
with unpublished base bug:
Bug 11801934 : WRONG PAGE-IN AND PAGE-OUT OS VM STATS IN AIX.

在vmware平台中的这个WARNING信息,如果不是bug引起,则很有可能和ora-04031/ora-04030相关,这个就严重多了

VMWare

Under VMWare, the messages may perhaps indicate a more serious issue, even when no memory related ORA-4031/ORA-4030 errors are reported.
Under circumstances, an instance in a virtual machine may be simply terminated by PMON due to error 471 without further errors in the alert log.
The OS logs may in such case report an out of memory condition like below:

[root@vmh ~]# grep Kill /var/log/messages*
/var/log/messages-20140629:Jun 27 18:29:06 vmh-msfc-dodp02 kernel: [1895074.304941] Out of memory: Kill process 42094 (oracle) score 391 or sacrifice child
/var/log/messages-20140629:Jun 27 18:29:06 vmh-msfc-dodp02 kernel: [1895074.305203] Killed process 42094, UID 303, (oracle) total-vm:189081588kB, anon-rss:27412kB, file-rss:109612

通常解决OS内存swap问题有以下几种方案:

1. 诊断是否存在内存泄露的进程,解决内存泄露 2. 调优SGA/PGA,减少oracle对内存的占用 3. 利用/proc/sys/vm/drop_caches,暂时释放一些cache的内存(Linux) 4. 调整系统VM内存管理参数, 例如Linux上sysctl.conf中的以下几个参数:


vm.min_free_kbytes:Raising the value in /proc/sys/vm/min_free_kbytes will cause the system to start reclaiming memory at an earlier time than it would have before.

vm.vfs_cache_pressure:At the default value of vfs_cache_pressure = 100 the kernel will attempt to reclaim dentries and inodes at a “fair” rate with respect to pagecache and swapcache reclaim. Decreasing vfs_cache_pressure causes the kernel to prefer to retain dentry and inode caches. Increasing vfs_cache_pressure beyond 100 causes the kernel to prefer to reclaim dentries and inodes.


vm.swappiness:default 60,Apparently /proc/sys/vm/swappiness on Red Hat Linux allows the admin to tune how aggressively the kernel swaps out processes'memory. Decreasing the swappiness setting may result in improved Directory performance as the kernel holds more of the server process in memory longer before swapping it out.

设置以下值,以减少OOM(Out Of Memory)的可能性:

# Oracle-Validated setting for vm.min_free_kbytes is 51200 to avoid OOM killer
vm.min_free_kbytes = 51200
vm.swappiness = 40
vm.vfs_cache_pressure = 200


본 웹사이트의 성명
본 글의 내용은 네티즌들의 자발적인 기여로 작성되었으며, 저작권은 원저작자에게 있습니다. 본 사이트는 이에 상응하는 법적 책임을 지지 않습니다. 표절이나 침해가 의심되는 콘텐츠를 발견한 경우 admin@php.cn으로 문의하세요.

핫 AI 도구

Undresser.AI Undress

Undresser.AI Undress

사실적인 누드 사진을 만들기 위한 AI 기반 앱

AI Clothes Remover

AI Clothes Remover

사진에서 옷을 제거하는 온라인 AI 도구입니다.

Undress AI Tool

Undress AI Tool

무료로 이미지를 벗다

Clothoff.io

Clothoff.io

AI 옷 제거제

AI Hentai Generator

AI Hentai Generator

AI Hentai를 무료로 생성하십시오.

인기 기사

R.E.P.O. 에너지 결정과 그들이하는 일 (노란색 크리스탈)
4 몇 주 전 By 尊渡假赌尊渡假赌尊渡假赌
R.E.P.O. 최고의 그래픽 설정
4 몇 주 전 By 尊渡假赌尊渡假赌尊渡假赌
R.E.P.O. 아무도들을 수없는 경우 오디오를 수정하는 방법
4 몇 주 전 By 尊渡假赌尊渡假赌尊渡假赌
WWE 2K25 : Myrise에서 모든 것을 잠금 해제하는 방법
1 몇 달 전 By 尊渡假赌尊渡假赌尊渡假赌

뜨거운 도구

메모장++7.3.1

메모장++7.3.1

사용하기 쉬운 무료 코드 편집기

SublimeText3 중국어 버전

SublimeText3 중국어 버전

중국어 버전, 사용하기 매우 쉽습니다.

스튜디오 13.0.1 보내기

스튜디오 13.0.1 보내기

강력한 PHP 통합 개발 환경

드림위버 CS6

드림위버 CS6

시각적 웹 개발 도구

SublimeText3 Mac 버전

SublimeText3 Mac 버전

신 수준의 코드 편집 소프트웨어(SublimeText3)

Go 언어는 데이터베이스의 추가, 삭제, 수정 및 쿼리 작업을 어떻게 구현합니까? Go 언어는 데이터베이스의 추가, 삭제, 수정 및 쿼리 작업을 어떻게 구현합니까? Mar 27, 2024 pm 09:39 PM

Go 언어는 효율적이고 간결하며 배우기 쉬운 프로그래밍 언어입니다. 동시 프로그래밍과 네트워크 프로그래밍의 장점 때문에 개발자들이 선호합니다. 실제 개발에서 데이터베이스 작업은 필수적인 부분입니다. 이 기사에서는 Go 언어를 사용하여 데이터베이스 추가, 삭제, 수정 및 쿼리 작업을 구현하는 방법을 소개합니다. Go 언어에서는 일반적으로 사용되는 SQL 패키지, Gorm 등과 같은 타사 라이브러리를 사용하여 데이터베이스를 운영합니다. 여기서는 sql 패키지를 예로 들어 데이터베이스의 추가, 삭제, 수정 및 쿼리 작업을 구현하는 방법을 소개합니다. MySQL 데이터베이스를 사용하고 있다고 가정합니다.

Hibernate는 어떻게 다형성 매핑을 구현합니까? Hibernate는 어떻게 다형성 매핑을 구현합니까? Apr 17, 2024 pm 12:09 PM

Hibernate 다형성 매핑은 상속된 클래스를 데이터베이스에 매핑할 수 있으며 다음 매핑 유형을 제공합니다. Join-subclass: 상위 클래스의 모든 열을 포함하여 하위 클래스에 대한 별도의 테이블을 생성합니다. 클래스별 테이블: 하위 클래스별 열만 포함하는 하위 클래스에 대한 별도의 테이블을 만듭니다. Union-subclass: Joined-subclass와 유사하지만 상위 클래스 테이블이 모든 하위 클래스 열을 통합합니다.

iOS 18에는 손실되거나 손상된 사진을 검색할 수 있는 새로운 '복구된' 앨범 기능이 추가되었습니다. iOS 18에는 손실되거나 손상된 사진을 검색할 수 있는 새로운 '복구된' 앨범 기능이 추가되었습니다. Jul 18, 2024 am 05:48 AM

Apple의 최신 iOS18, iPadOS18 및 macOS Sequoia 시스템 릴리스에는 사진 애플리케이션에 중요한 기능이 추가되었습니다. 이 기능은 사용자가 다양한 이유로 손실되거나 손상된 사진과 비디오를 쉽게 복구할 수 있도록 설계되었습니다. 새로운 기능에는 사진 앱의 도구 섹션에 '복구됨'이라는 앨범이 도입되었습니다. 이 앨범은 사용자가 기기에 사진 라이브러리에 포함되지 않은 사진이나 비디오를 가지고 있을 때 자동으로 나타납니다. "복구된" 앨범의 출현은 데이터베이스 손상으로 인해 손실된 사진과 비디오, 사진 라이브러리에 올바르게 저장되지 않은 카메라 응용 프로그램 또는 사진 라이브러리를 관리하는 타사 응용 프로그램에 대한 솔루션을 제공합니다. 사용자는 몇 가지 간단한 단계만 거치면 됩니다.

HTML이 데이터베이스를 읽는 방법에 대한 심층 분석 HTML이 데이터베이스를 읽는 방법에 대한 심층 분석 Apr 09, 2024 pm 12:36 PM

HTML은 데이터베이스를 직접 읽을 수 없지만 JavaScript 및 AJAX를 통해 읽을 수 있습니다. 단계에는 데이터베이스 연결 설정, 쿼리 보내기, 응답 처리 및 페이지 업데이트가 포함됩니다. 이 기사에서는 JavaScript, AJAX 및 PHP를 사용하여 MySQL 데이터베이스에서 데이터를 읽는 실제 예제를 제공하고 쿼리 결과를 HTML 페이지에 동적으로 표시하는 방법을 보여줍니다. 이 예제에서는 XMLHttpRequest를 사용하여 데이터베이스 연결을 설정하고 쿼리를 보내고 응답을 처리함으로써 페이지 요소에 데이터를 채우고 데이터베이스를 읽는 HTML 기능을 실현합니다.

PHP에서 MySQLi를 사용하여 데이터베이스 연결을 설정하는 방법에 대한 자세한 튜토리얼 PHP에서 MySQLi를 사용하여 데이터베이스 연결을 설정하는 방법에 대한 자세한 튜토리얼 Jun 04, 2024 pm 01:42 PM

MySQLi를 사용하여 PHP에서 데이터베이스 연결을 설정하는 방법: MySQLi 확장 포함(require_once) 연결 함수 생성(functionconnect_to_db) 연결 함수 호출($conn=connect_to_db()) 쿼리 실행($result=$conn->query()) 닫기 연결( $conn->close())

PHP에서 데이터베이스 연결 오류를 처리하는 방법 PHP에서 데이터베이스 연결 오류를 처리하는 방법 Jun 05, 2024 pm 02:16 PM

PHP에서 데이터베이스 연결 오류를 처리하려면 다음 단계를 사용할 수 있습니다. mysqli_connect_errno()를 사용하여 오류 코드를 얻습니다. 오류 메시지를 얻으려면 mysqli_connect_error()를 사용하십시오. 이러한 오류 메시지를 캡처하고 기록하면 데이터베이스 연결 문제를 쉽게 식별하고 해결할 수 있어 애플리케이션이 원활하게 실행될 수 있습니다.

PHP를 사용하여 데이터베이스에서 중국어 왜곡 문자를 처리하기 위한 팁과 사례 PHP를 사용하여 데이터베이스에서 중국어 왜곡 문자를 처리하기 위한 팁과 사례 Mar 27, 2024 pm 05:21 PM

PHP는 웹사이트 개발에 널리 사용되는 백엔드 프로그래밍 언어로, 강력한 데이터베이스 운영 기능을 갖추고 있으며 MySQL과 같은 데이터베이스와 상호 작용하는 데 자주 사용됩니다. 그러나 한자 인코딩의 복잡성으로 인해 데이터베이스에서 잘못된 한자를 처리할 때 문제가 자주 발생합니다. 이 기사에서는 잘못된 문자의 일반적인 원인, 솔루션 및 특정 코드 예제를 포함하여 데이터베이스에서 중국어 잘못된 문자를 처리하기 위한 PHP의 기술과 사례를 소개합니다. 문자가 왜곡되는 일반적인 이유는 잘못된 데이터베이스 문자 집합 설정 때문입니다. 데이터베이스를 생성할 때 utf8 또는 u와 같은 올바른 문자 집합을 선택해야 합니다.

Golang에서 데이터베이스 콜백 함수를 사용하는 방법은 무엇입니까? Golang에서 데이터베이스 콜백 함수를 사용하는 방법은 무엇입니까? Jun 03, 2024 pm 02:20 PM

Golang의 데이터베이스 콜백 기능을 사용하면 다음을 달성할 수 있습니다. 지정된 데이터베이스 작업이 완료된 후 사용자 정의 코드를 실행합니다. 추가 코드를 작성하지 않고도 별도의 함수를 통해 사용자 정의 동작을 추가할 수 있습니다. 삽입, 업데이트, 삭제, 쿼리 작업에 콜백 함수를 사용할 수 있습니다. 콜백 함수를 사용하려면 sql.Exec, sql.QueryRow, sql.Query 함수를 사용해야 합니다.

See all articles