그룹 기반 복제는 오류에 사용되는 A 기술입니다. 관용 시스템. 복제 그룹은 서로 통신할 수 있는 여러 개의 서버(노드)로 구성됩니다.
통신 계층에서 그룹 복제는 원자성 메시지 전달 및 메시지 전체 순서 지정과 같은 일련의 메커니즘을 구현합니다. 이러한 원자적이고 추상적인 메커니즘은 고급 데이터베이스 복제 솔루션 구현을 위한 강력한 지원을 제공합니다.
MySQL 그룹 복제는 이러한 기술과 개념을 기반으로 완전히 업데이트된 다중 마스터 복제 프로토콜을 구현합니다.
간단히 말하면 복제 그룹은 노드 그룹입니다. 각 노드는 독립적으로 트랜잭션을 실행할 수 있으며 트랜잭션 읽기 및 쓰기는 커밋하기 전에 그룹 내 다른 노드와 조정됩니다.
따라서 트랜잭션을 제출할 준비가 되면 그룹 내에서 자동으로 자동으로 방송되어 어떤 내용이 변경되었는지/어떤 트랜잭션이 수행되었는지 다른 노드에 알립니다.
이 원자 브로드캐스트 방법은 모든 노드에서 이 트랜잭션을 동일한 순서로 유지합니다.
즉, 각 노드는 동일한 트랜잭션 로그를 동일한 순서로 수신하므로 각 노드는 이러한 트랜잭션 로그를 동일한 순서로 재생하며 궁극적으로 전체 그룹은 상태 완전히 일관되게 유지됩니다.
그러나 서로 다른 노드에서 실행되는 트랜잭션 간에 리소스 경합이 있을 수 있습니다. 이 현상은 두 개의 서로 다른 동시 트랜잭션에서 쉽게 발생합니다.
동일한 데이터 행을 업데이트하는 두 개의 동시 트랜잭션이 서로 다른 노드에 있다고 가정하면 리소스 경합이 발생합니다.
이러한 상황에 직면한 GroupReplication은 먼저 제출된 트랜잭션이 유효한 트랜잭션이라고 판단하고 나중에 제출된 트랜잭션이 직접 중단되거나 롤백된 후 최종적으로 폐기됩니다.
따라서 이 역시 비공유 복제 방식이며 각 노드는 데이터의 전체 복사본을 저장합니다. 특정 작업 흐름을 설명하고 다른 솔루션과 간결하게 비교할 수 있는 다음 그림 01.png를 참조하세요. 이 복제 방식은 DBSM(데이터베이스 상태 머신)의 복제 방법과 어느 정도 유사합니다.
공식 다운로드는 최신 버전만 유지하고 있습니다. URL 주소 5.7.17은 오랫동안 유효하지 않을 수 있으므로 여기 Baidu Cloud Disk에 보관해 두었습니다. 버전은 5.7.17이며 언제든지 다운로드하여 사용할 수 있습니다.
다음과 같이 3개의 db 서버에 /etc/hosts 매핑을 설정합니다.
192.168.121.71 db1 192.168.121.111 db2 192.168.121.24 db3
설치됨 데이터베이스 서버:
| 포트 | < td valign="top">데이터 디렉터리서버 ID | ||||||||||||||||
192.168.121.71 (db1) | 3317 |
| <🎜>12001 <🎜> | < /tr>|||||||||||||||
| <🎜 >192.168.121.111 (db2)<🎜> | <🎜>3317<🎜> | < td valign="top"><🎜>/data/mysql/data <🎜><🎜>12002<🎜> | ||||||||||||||||
| <🎜>3317<🎜> | <🎜>/data/mysql/data<🎜> | <🎜>12003<🎜> |
在db1/db2/db3上建立复制账号：
mysql> SET SQL_LOG_BIN=0; Query OK, 0 rows affected (0.00 sec) mysql> mysql> GRANT REPLICATION SLAVE ON *.* TO 'repl'@'192.168.%' IDENTIFIED BY 'rlpbright_1927@ys'; Query OK, 0 rows affected, 1 warning (0.00 sec) mysql> mysql> SET SQL_LOG_BIN=1; Query OK, 0 rows affected (0.00 sec) mysql>
在db1、db2、db3上依次安装group replication插件
mysql> INSTALL PLUGIN group_replication SONAME 'group_replication.so'; Query OK, 0 rows affected (0.01 sec) mysql>
plugin-load=group_replication或者直接在配置文件my.cnf中配置：
查看group replication组件
mysql> show plugins; +----------------------------+----------+--------------------+----------------------+---------+ | Name | Status | Type | Library | License | +----------------------------+----------+--------------------+----------------------+---------+ | binlog | ACTIVE | STORAGE ENGINE | NULL | GPL | | mysql_native_password | ACTIVE | AUTHENTICATION | NULL | GPL | | sha256_password | ACTIVE | AUTHENTICATION | NULL | GPL | | MyISAM | ACTIVE | STORAGE ENGINE | NULL | GPL | | PERFORMANCE_SCHEMA | ACTIVE | STORAGE ENGINE | NULL | GPL | | InnoDB | ACTIVE | STORAGE ENGINE | NULL | GPL | | INNODB_TRX | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_LOCKS | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_LOCK_WAITS | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_CMP | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_CMP_RESET | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_CMPMEM | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_CMPMEM_RESET | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_CMP_PER_INDEX | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_CMP_PER_INDEX_RESET | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_BUFFER_PAGE | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_BUFFER_PAGE_LRU | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_BUFFER_POOL_STATS | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_TEMP_TABLE_INFO | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_METRICS | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_FT_DEFAULT_STOPWORD | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_FT_DELETED | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_FT_BEING_DELETED | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_FT_CONFIG | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_FT_INDEX_CACHE | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_FT_INDEX_TABLE | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_SYS_TABLES | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_SYS_TABLESTATS | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_SYS_INDEXES | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_SYS_COLUMNS | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_SYS_FIELDS | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_SYS_FOREIGN | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_SYS_FOREIGN_COLS | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_SYS_TABLESPACES | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_SYS_DATAFILES | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_SYS_VIRTUAL | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | MRG_MYISAM | ACTIVE | STORAGE ENGINE | NULL | GPL | | MEMORY | ACTIVE | STORAGE ENGINE | NULL | GPL | | CSV | ACTIVE | STORAGE ENGINE | NULL | GPL | | BLACKHOLE | ACTIVE | STORAGE ENGINE | NULL | GPL | | partition | ACTIVE | STORAGE ENGINE | NULL | GPL | | FEDERATED | DISABLED | STORAGE ENGINE | NULL | GPL | | ARCHIVE | ACTIVE | STORAGE ENGINE | NULL | GPL | | ngram | ACTIVE | FTPARSER | NULL | GPL | | group_replication | ACTIVE | GROUP REPLICATION | group_replication.so | GPL | +----------------------------+----------+--------------------+----------------------+---------+ 45 rows in set (0.00 sec) mysql>
看到有group_replication ACTIVE，表示插group_replication插件安装成功。
确保binlog_format是row格式。
mysql> show variables like 'binlog_format'; +---------------+-------+ | Variable_name | Value | +---------------+-------+ | binlog_format | ROW | +---------------+-------+ 1 row in set (0.00 sec) mysql>
两种配置方式，在线添加 OR 配置文件
（1） db1上的my.cnf配置： # replication config server_id=12001 gtid_mode=ON enforce_gtid_consistency=ON master_info_repository=TABLE relay_log_info_repository=TABLE binlog_checksum=NONE log_slave_updates=ON log_bin=binlog binlog_format=ROW # group replication config transaction_write_set_extraction=XXHASH64 loose-group_replication_group_name="e4668cea-d7ca-11e6-86b5-18a99b76310d" loose-group_replication_start_on_boot=off loose-group_replication_local_address= "db1:24901" loose-group_replication_group_seeds= "db1:24901,db2:24902,db3:24903" loose-group_replication_bootstrap_group= off loose-group_replication_single_primary_mode=FALSE loose-group_replication_enforce_update_everywhere_checks= TRUE （2）db2上的my.cnf配置： # replication config server_id=12002 gtid_mode=ON enforce_gtid_consistency=ON master_info_repository=TABLE relay_log_info_repository=TABLE binlog_checksum=NONE log_slave_updates=ON log_bin=binlog binlog_format=ROW # group replication config transaction_write_set_extraction=XXHASH64 loose-group_replication_group_name="e4668cea-d7ca-11e6-86b5-18a99b76310d" loose-group_replication_start_on_boot=off loose-group_replication_local_address= "db2:24902" loose-group_replication_group_seeds= "db1:24901,db2:24902,db3:24903" loose-group_replication_bootstrap_group= off loose-group_replication_single_primary_mode=FALSE loose-group_replication_enforce_update_everywhere_checks= TRUE （3）db3上的my.cnf配置： # replication config server_id=12003 gtid_mode=ON enforce_gtid_consistency=ON master_info_repository=TABLE relay_log_info_repository=TABLE binlog_checksum=NONE log_slave_updates=ON log_bin=binlog binlog_format=ROW # group replication config transaction_write_set_extraction=XXHASH64 loose-group_replication_group_name="e4668cea-d7ca-11e6-86b5-18a99b76310d" loose-group_replication_start_on_boot=off loose-group_replication_local_address= "db3:24903" loose-group_replication_group_seeds= "db1:24901,db2:24902,db3:24903" loose-group_replication_bootstrap_group= off loose-group_replication_single_primary_mode=FALSE loose-group_replication_enforce_update_everywhere_checks= TRUE
配置完后，重启3个db上的mysql服务
Db1启动：
[root@hch_test_dbm2_121_71 ~]# service mysqld start Starting MySQL.. [确定] [root@hch_test_dbm2_121_71 ~]#
Db2启动：
[root@bpe_service ~]# service mysqld start Starting MySQL.. [确定] [root@bpe_service ~]#
Db3启动：
[root@hch_test_web_1_24 ~]# service mysqld start Starting MySQL.. [确定] [root@hch_test_web_1_24 ~]#
构建之前，保证db1、db2、db3的read_only是关闭的
开始构建group replication集群，通常操作命令
mysql> CHANGE MASTER TO MASTER_USER='repl', MASTER_PASSWORD='rlpbright_1927@ys' FOR CHANNEL 'group_replication_recovery'; Query OK, 0 rows affected, 2 warnings (0.02 sec) mysql>
db1上建立基本主库master库：
# 设置group_replication_bootstrap_group为ON是为了标示以后加入集群的服务器以这台服务器为基准，以后加入的就不需要设置。
mysql> SET GLOBAL group_replication_bootstrap_group = ON; Query OK, 0 rows affected (0.00 sec) mysql> START GROUP_REPLICATION; Query OK, 0 rows affected (1.03 sec) mysql> SET GLOBAL group_replication_bootstrap_group=OFF; Query OK, 0 rows affected (0.00 sec) mysql> mysql> SELECT * FROM performance_schema.replication_group_members; +---------------------------+--------------------------------------+----------------------+-------------+--------------+ | CHANNEL_NAME | MEMBER_ID | MEMBER_HOST | MEMBER_PORT | MEMBER_STATE | +---------------------------+--------------------------------------+----------------------+-------------+--------------+ | group_replication_applier | 3381d155-d7d1-11e6-94f7-b8ca3af6e36c | hch_test_dbm2_121_71 | 3317 | ONLINE | +---------------------------+--------------------------------------+----------------------+-------------+--------------+ 1 row in set (0.00 sec) mysql>
Db2上启动group_replication：
Db2上mysql命令行上执行启动：
mysql> START GROUP_REPLICATION; Query OK, 0 rows affected (1.02 sec) mysql>
db1后台error log日志显示，看到db2加入进来了，进了group：
2017-01-11T07:51:40.623093Z 0 [Note] Plugin group_replication reported: 'Marking group replication view change with view_id 14841207424144277:8' 2017-01-11T07:51:40.650962Z 21 [Note] Start binlog_dump to master_thread_id(21) slave_server(12002), pos(, 4) 2017-01-11T07:51:40.687441Z 0 [Note] Plugin group_replication reported: 'The member with address bpe_service:3317 was declared online within the replication group' 2017-01-11T07:52:40.651481Z 21 [Note] Aborted connection 21 to db: 'unconnected' user: 'repl' host: '192.168.121.111' (failed on flush_net())
再去master库db1上，查看group_replication成员，会有db2的显示，看到MEMBER_STATE都是ONLINE，表示都是MASTER：
mysql> SELECT * FROM performance_schema.replication_group_members; +---------------------------+--------------------------------------+----------------------+-------------+--------------+ | CHANNEL_NAME | MEMBER_ID | MEMBER_HOST | MEMBER_PORT | MEMBER_STATE | +---------------------------+--------------------------------------+----------------------+-------------+--------------+ | group_replication_applier | 3381d155-d7d1-11e6-94f7-b8ca3af6e36c | hch_test_dbm2_121_71 | 3317 | ONLINE | | group_replication_applier | 84dba8ff-d7d2-11e6-aa9a-18a99b76310d | bpe_service | 3317 | ONLINE | +---------------------------+--------------------------------------+----------------------+-------------+--------------+ 2 rows in set (0.00 sec) mysql>
db3上启动group_replication：
Db3命令行上执行：
mysql> set global group_replication_allow_local_disjoint_gtids_join=ON; Query OK, 0 rows affected (0.00 sec) mysql> start group_replication; Query OK, 0 rows affected (1.99 sec) mysql>
再去master库db1上，查看group_replication成员，会有db3的显示，而且已经是ONLINE了
mysql> SELECT * FROM performance_schema.replication_group_members; +---------------------------+--------------------------------------+----------------------+-------------+--------------+ | CHANNEL_NAME | MEMBER_ID | MEMBER_HOST | MEMBER_PORT | MEMBER_STATE | +---------------------------+--------------------------------------+----------------------+-------------+--------------+ | group_replication_applier | 21750571-d7d3-11e6-91e2-18a99b763071 | hch_test_web_1_24 | 3317 | ONLINE | | group_replication_applier | 3381d155-d7d1-11e6-94f7-b8ca3af6e36c | hch_test_dbm2_121_71 | 3317 | ONLINE | | group_replication_applier | 84dba8ff-d7d2-11e6-aa9a-18a99b76310d | bpe_service | 3317 | ONLINE | +---------------------------+--------------------------------------+----------------------+-------------+--------------+ 3 rows in set (0.00 sec) mysql>
db1上后台error log显示：
2017-01-11T08:13:05.972276Z 0 [Note] Plugin group_replication reported: 'getstart group_id 8da193f6' 2017-01-11T08:13:08.146144Z 0 [Note] Plugin group_replication reported: 'Marking group replication view change with view_id 14841207424144277:11' 2017-01-11T08:13:08.174808Z 25 [Note] Start binlog_dump to master_thread_id(25) slave_server(12003), pos(, 4) 2017-01-11T08:13:08.218338Z 0 [Note] Plugin group_replication reported: 'The member with address hch_test_web_1_24:3317 was declared online within the replication group' 2017-01-11T08:14:08.175308Z 25 [Note] Aborted connection 25 to db: 'unconnected' user: 'repl' host: '192.168.121.24' (failed on flush_net())
最后查看集群状态：
mysql> SELECT * FROM performance_schema.replication_group_members; +---------------------------+--------------------------------------+----------------------+-------------+--------------+ | CHANNEL_NAME | MEMBER_ID | MEMBER_HOST | MEMBER_PORT | MEMBER_STATE | +---------------------------+--------------------------------------+----------------------+-------------+--------------+ | group_replication_applier | 3d872c2e-d670-11e6-ac1f-b8ca3af6e36c | hch_test_dbm2_121_71 | 3317 | ONLINE | | group_replication_applier | ef8ac2de-d671-11e6-9ba4-18a99b763071 | hch_test_web_1_24 | 3317 | ONLINE | | group_replication_applier | fdf2b02e-d66f-11e6-98a8-18a99b76310d | bpe_service | 3317 | ONLINE | +---------------------------+--------------------------------------+----------------------+-------------+--------------+ 3 rows in set (0.00 sec) mysql>
测试，在master库db1上建立测试库db1，测试表t1，录入一条数据
mysql> create database db1; Query OK, 1 row affected (0.00 sec) mysql> create table db1.t1(id int,cn varchar(32)); Query OK, 0 rows affected (0.02 sec) mysql> mysql> insert into t1(id,cn)values( 1,'a'); ERROR 3098 (HY000): The table does not comply with the requirements by an external plugin. mysql> mysql> # 这里原因是group_replaction环境下面，表必须有主键不然不允许往里insert值。所以修改表t1，将id字段设置程主键即可。 mysql> alter table t1 modify id int primary key; Query OK, 0 rows affected (0.02 sec) Records: 0 Duplicates: 0 Warnings: 0 로그인 후 복사 |
然后在db2上执行insert操作，则成功
然后再db3上执行insert操作，则成功
在db1、db2、db3分部录入的数据，再分表去db1、db2、db3上查看t1表的数据，数据都已经复制同步过来了，已经实现了group里面多成员member多处写操作。
简要步骤：
（1） 安装mysql实例
（2） 准备my.cnf
#replication server_id=12001 # 这个是随着新服务器的添加会变化 gtid_mode=ON enforce_gtid_consistency=ON master_info_repository=TABLE relay_log_info_repository=TABLE binlog_checksum=NONE log_slave_updates=ON log_bin=binlog binlog_format=ROW #group replication transaction_write_set_extraction=XXHASH64 loose-group_replication_group_name="e4668cea-d7ca-11e6-86b5-18a99b76310d" loose-group_replication_start_on_boot=off loose-group_replication_local_address= "db1:24901" # 这个是随着新服务器的添加会变化 loose-group_replication_group_seeds= "db1:24901,db2:24902,db3:24903"# 这个是随着新服务器的添加会变化 loose-group_replication_bootstrap_group= off loose-group_replication_single_primary_mode=FALSE loose-group_replication_enforce_update_everywhere_checks= TRUE 로그인 후 복사
|
（3） 启动mysql实例，service mysqld start;
（4） 开启group replication
SET SQL_LOG_BIN=0; # 在建立复制账号的时候，不需要进入binlog日志 GRANT REPLICATION SLAVE ON *.* TO 'repl'@'192.168.%' IDENTIFIED BY 'rlpbright_1927@ys'; SET SQL_LOG_BIN=1; CHANGE MASTER TO MASTER_USER='repl', MASTER_PASSWORD='rlpbright_1927@ys' FOR CHANNEL 'group_replication_recovery'; START group_replication; SELECT * FROM performance_schema.replication_group_members; 로그인 후 복사 |
（5）验证组成员，SELECT * FROM performance_schema.replication_group_members;
查看group状态信息：SELECT * FROM performance_schema.replication_group_members;
查询replication协议的其它数据：select * from performance_schema.replication_group_member_stats\G
|
查看后台进程2个：
[root@hch_test_dbm2_121_71 soft]# netstat -ntpl|grep mysql tcp 0 0 0.0.0.0:24901 0.0.0.0:* LISTEN 3665/mysqld tcp 0 0 :::3317 :::* LISTEN 3665/mysqld [root@hch_test_dbm2_121_71 soft]# 로그인 후 복사
|
组复制成员状态表：select * from performance_schema.replication_group_member_stats;查看的是当前的状态：
performance_schema.replication_applier_status
Db2的mysql窗口报错： mysql> START GROUP_REPLICATION; ERROR 3092 (HY000): The server is not configured properly to be an active member of the group. Please see more details on error log. mysql> db2的error log信息如下： 2017-01-11T07:57:41.161360Z 0 [ERROR] Plugin group_replication reported: 'This member has more executed transactions than those present in the group. Local transactions: 84dba8ff-d7d2-11e6-aa9a-18a99b76310d:1 > Group transactions: 3381d155-d7d1-11e6-94f7-b8ca3af6e36c:1, e4668cea-d7ca-11e6-86b5-18a99b76310d:1-3' 2017-01-11T07:57:41.161430Z 0 [ERROR] Plugin group_replication reported: 'The member contains transactions not present in the group. The member will now exit the group.' 2017-01-11T07:57:41.161445Z 0 [Note] Plugin group_replication reported: 'To force this member into the group you can use the group_replication_allow_local_disjoint_gtids_join option' 2017-01-11T07:57:41.161589Z 3 [Note] Plugin group_replication reported: 'Going to wait for view modification' 2017-01-11T07:57:41.162126Z 0 [Note] Plugin group_replication reported: 'getstart group_id 8da193f6' 2017-01-11T07:57:44.508236Z 0 [Note] Plugin group_replication reported: 'state 4330 action xa_terminate' 2017-01-11T07:57:44.508429Z 0 [Note] Plugin group_replication reported: 'new state x_start' 2017-01-11T07:57:44.508561Z 0 [Note] Plugin group_replication reported: 'state 4257 action xa_exit' 2017-01-11T07:57:44.508720Z 0 [Note] Plugin group_replication reported: 'Exiting xcom thread' 2017-01-11T07:57:44.508746Z 0 [Note] Plugin group_replication reported: 'new state x_start' 2017-01-11T07:57:49.549137Z 3 [Note] Plugin group_replication reported: 'auto_increment_increment is reset to 1' 2017-01-11T07:57:49.549192Z 3 [Note] Plugin group_replication reported: 'auto_increment_offset is reset to 1' 2017-01-11T07:57:49.549472Z 23 [Note] Error reading relay log event for channel 'group_replication_applier': slave SQL thread was killed 2017-01-11T07:57:49.550037Z 20 [Note] Plugin group_replication reported: 'The group replication applier thread was killed' 【解决办法】设置group_replication_allow_local_disjoint_gtids_join为ON mysql> set global group_replication_allow_local_disjoint_gtids_join=ON; Query OK, 0 rows affected (0.00 sec) mysql> START GROUP_REPLICATION; Query OK, 0 rows affected (5.52 sec) mysql> 로그인 후 복사 |
Sql界面显示状态为ERROR：
Errorlog显示：
2017-01-11T08:07:34.587378Z 12 [Note] 'CHANGE MASTER TO FOR CHANNEL 'group_replication_recovery' executed'. Previous state master_host='bpe_service', master_port= 3317, master_log_file='', master_log_pos= 4, master_bind=''. New state master_host='<NULL>', master_port= 0, master_log_file='', master_log_pos= 4, master_bind=''. 2017-01-11T08:07:34.591679Z 12 [ERROR] Plugin group_replication reported: 'Fatal error during the Recovery process of Group Replication. The server will leave the group.' 2017-01-11T08:07:34.592447Z 0 [Note] Plugin group_replication reported: 'getstart group_id 8da193f6' 2017-01-11T08:07:37.943536Z 0 [Note] Plugin group_replication reported: 'state 4330 action xa_terminate' 2017-01-11T08:07:37.943852Z 0 [Note] Plugin group_replication reported: 'new state x_start' 2017-01-11T08:07:37.943879Z 0 [Note] Plugin group_replication reported: 'state 4257 action xa_exit' 2017-01-11T08:07:37.943981Z 0 [Note] Plugin group_replication reported: 'Exiting xcom thread' 2017-01-11T08:07:37.943999Z 0 [Note] Plugin group_replication reported: 'new state x_start' 로그인 후 복사 |
【解决办法】：
mysql> CHANGE MASTER TO MASTER_USER='repl', MASTER_PASSWORD='rlpbright_1927@ys' FOR CHANNEL 'group_replication_recovery'; Query OK, 0 rows affected, 2 warnings (0.01 sec) mysql> stop group_replication; Query OK, 0 rows affected (0.01 sec) mysql> start group_replication; Query OK, 0 rows affected (2.20 sec) mysql> mysql> SELECT * FROM performance_schema.replication_group_members; +---------------------------+--------------------------------------+----------------------+-------------+--------------+ | CHANNEL_NAME | MEMBER_ID | MEMBER_HOST | MEMBER_PORT | MEMBER_STATE | +---------------------------+--------------------------------------+----------------------+-------------+--------------+ | group_replication_applier | 21750571-d7d3-11e6-91e2-18a99b763071 | hch_test_web_1_24 | 3317 | ONLINE | | group_replication_applier | 3381d155-d7d1-11e6-94f7-b8ca3af6e36c | hch_test_dbm2_121_71 | 3317 | ONLINE | | group_replication_applier | 84dba8ff-d7d2-11e6-aa9a-18a99b76310d | bpe_service | 3317 | ONLINE | +---------------------------+--------------------------------------+----------------------+-------------+--------------+ 3 rows in set (0.00 sec) mysql> 로그인 후 복사
위 내용은 MySQL 그룹 복제 [다중 기본 모드]의 구성 및 배포 프로세스에 대한 자세한 소개(그림 및 텍스트)의 상세 내용입니다. 자세한 내용은 PHP 중국어 웹사이트의 기타 관련 기사를 참조하세요!
관련 라벨：
원천：php.cn
본 웹사이트의 성명
본 글의 내용은 네티즌들의 자발적인 기여로 작성되었으며, 저작권은 원저작자에게 있습니다. 본 사이트는 이에 상응하는 법적 책임을 지지 않습니다. 표절이나 침해가 의심되는 콘텐츠를 발견한 경우 admin@php.cn으로 문의하세요.
저자별 최신 기사
최신 이슈
자식 창이 부모 창을 작동하지만 출력이 응답하지 않습니다.
처음 두 문장은 실행 가능하지만 마지막 문장은 구현할 수 없습니다.
에서 2024-04-19 15:37:47
0
1
1880
상위 창에 출력이 없습니다.
document.onclick = function(){ window.opener.document.write('나는 자식 창의 출력입니다.');
에서 2024-04-18 23:52:34
0
1
1763
관련 주제
더>
|
![[웹 프런트엔드] Node.js 빠른 시작](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
