©
이 문서에서는 PHP 중국어 웹사이트 매뉴얼 풀어 주다
本节包括在 HP-UX 平台下安装 PHP 的说明和提示。
在 HP-UX 系统下安装 PHP 有两个选择,一是编译,二是安装预编译的可执行包。
官方发布的预编译包可在此地址搜索:» http://software.hp.com/。
在重新编写本节手册之前,在 HP-UX 系统下编译 PHP(以及相关扩展)的文档已被删除。目前请参考此外部文档:» Building Apache and PHP on HP-UX 11.11。
[#1] Vinayak [2006-03-23 04:14:59]
Installing PHP 5.x with Apache 2.x on HP UX 11i and configuring
PHP 5.x with Oracle 9i
I am very glad to share this information to configure PHP 5.x work
with Apache 2.x and Oracle 9i on HP UX 11i.
Step 1: Install Apache 2.x with DSO support:
--------------------------------------------
This is a stratight forward Apache installation with
--enable-so option
gzip -d httpd-2_0_NN.tar.gz
tar xvf httpd-2_0_NN.tar
cd httpd-2_0_NN
./configure \
--prefix=/var/apps/apache2 \
--enable-so \
--enable-mods-shared=most \
--libexecdir=/var/apps/apache2/libexec
You can add other options as required.
make
make install
Step 2: Install and configure PHP 5.x with Oracle 9i
----------------------------------------------------
Edit the ./configure file to change "$OCI8_DIR/lib" as "$OCI8_DIR/lib32"
By default, with Oracle 9i, "$OCI8_DIR/lib" will be poiting to
Oracle 64 bit libraries in "$OCI8_DIR/lib64" directory.
Unfortunately, PHP 5.x does not work with 64 bit oracle shared libraries.
Run configure..
$ ./configure \
--prefix=/var/apps/php \
--with-apxs2=/var/apps/apache2/bin/apxs \
--with-oci8=/oracle/app/product/9.0.2 \
--disable-libxml \
--enable-libgcc \
--enable-ftp \
--enable-calendar \
--enable-track-vars \
--enable-trans-sid \
--enable-sigchild \
--libexecdir=/var/apps/apache2/libexec \
--with-config-file-path=/var/apps/apache2/conf
--enable-libgcc \
--enable-sigchild \
You can add other options as required. You can use the --help
option to configure to get a complete list.
After configure runs, you must edit the file libtool.
$ vi ./libtool
At line 184, you should change the line from:
deplibs_check_method="unknown"
to
deplibs_check_method="pass_all"
so that PHP and mod_php are properly compiled.
3. Compile and install the files.
Run make. This should complete normally.
$ make
Run make install. This will fail when it attempts to call apxs.
$ make install
Step 3: Configure Apache 2.x
----------------------------
Edit httpd.conf file to include
For PHP 5:
LoadModule php5_module modules/libphp5.so
AddType application/x-httpd-php .php .phtml
Set environment variables in $APACHE_ROOT/bin/envvars file
SHLIB_PATH="/var/apps/apache2/lib:$SHLIB_PATH"
export SHLIB_PATH
LD_LIBRARY_PATH=$ORACLE_HOME/app/product/9.0.2
/lib32
export LD_LIBRARY_PATH
LD_PRELOAD=/usr/lib/libpthread.sl:$ORACLE_HOME/app/
product/9.0.2/JRE/lib/PA_RISC/native_threads/libjava.sl
export LD_PRELOAD
After lot of hard work, by following the above procedure,
we were able to make PHP 5.x is work with Apache 2.x
and Oracle 9i on HP UX 11i OS.
Hope this will save your time!!
[#2] flconseil at yahoo dot fr [2006-01-23 06:47:01]
If hpws is not an option for you, or if you want to build Apache and PHP with your own options and extensions, I have written a step by step tutorial.
It explains how to build Apache 2.0 and PHP 5 from scratch on HP-UX 11i (11.11), including most modules and extensions (zlib, SSL, LDAP, iconv, expat, xml, xslt, gd, png, Xpm, jpeg, freetype, bzip2, curl, MySQL, PostgreSQL, Oracle, AdoDB) :
http://flaupretre.free.fr/redir.php?key=build_apa_php
[#3] Marcus dot Reimann at reimann-systemberatung dot de [2003-08-29 07:50:58]
If you need an Apache2-Server with PHP4 under HP-UX 11.x, it's a good way to download the HP-WebServer from the HP-Website (http://software.hp.com). The HP-Webserver comes with numerous moduls. First install the HP-Webserver (swinstall -s /absolute_path_to_depot_file/name_of_depot_file). After that, download the newest PHP-Version from http://www.php.net (HP ships the HP-Webserver with an old PHP-Version) and unpack the tar-file in a working-directory.
Use the following parameters for configure PHP:
./configure --with-apxs2=/opt/hpws/apache/bin/apxs --prefix=/opt/hpws/apache/php [and so on...]
If configure prints the error "expr: An integer value was expected.", than you have to edit the Script "configure". Replace the line:
APACHE_VERSION=`expr $4 \* 1000000 + $5 \* 1000 + $6`
with the following (correct and very long) line:
APACHE_VERSION=`$APXS_HTTPD -v | head -1 | cut -f3 -d' ' | cut -f2 -d'/' | awk 'BEGIN { FS = "."; } { printf "%d", ($1 * 1000 + $2) * 1000 + $3;}'`
Why? The output of "httpd -v" prints the following string:
Server version: HP-UX_Apache-based_Web_Server/2.0.46
Server built: Jun 26 2003 04:41:28
But the configure-Script can't deal with this string.
[#4] james at nospam dot hp dot com [2002-01-28 19:46:31]
To build for HP-UX 10.X/11.X (and some other UNIX variants) with '--enable-sockets', you'll get an error about 'u_int' being redefined in /usr/include/netinet/in.h and ext/sockets/sockets.c will fail to compile. The problem is this line from main/php_config.h:
#define in_addr_t u_int
The above define is a problem because HP-UX (and some other UNIXs) typedef in_addr_t. A good workaround is to replace this define in main/php_config.h with the lines from the HP-UX 11.X netinet/in.h header file (which will work for 10.X as well):
#ifndef _IN_ADDR_T
#define _IN_ADDR_T
#ifdef __LP64__
typedef unsigned int in_addr_t;
#else
typedef unsigned long in_addr_t;
#endif
#endif
[#5] spam at adhocinc dot com [2001-10-11 14:35:22]
For PHP 4.0.6 under HP-UX 11.00, I ran into errors during the compilation related to "LC_CTYPE" and other "LC_" vars. The compilation complained that "LC_" such and such first used in such and such function. (I think the error first came up in php_pcre.c, then in basic_functions.c). The solution was to add "#include <locale.h>" to the php.h file. Compilation was successful after that was added, with no other issues. Used gcc 2.95.3, apache 1.3.20, bison 1.28, flex 2.5.4.a.
[#6] steven at oakleafconsultancy dot com [2001-07-23 08:28:30]
Just a quick point to those of you (like me!) who might not be sharp enough to notice this: If you want to install PHP on an HP-UX 11.x box then you'll need to download and install the 11.x (not 10.20) versions of the software (like gcc and bison). I didn't notice this and spent a large proportion of a day trying to figure out why the software wouldn't install!
Steve
[#7] marshalm at ebrd dot com [2001-05-17 10:58:21]
HP-UX 11.X PA-RISC installation with oracle (oci8). You need to install the HP-UX patch PHSS_22514 patch (updated libdld.sl), otherwise you will get errors with dlopen() and dlclose() not found during the apache integration stage.
[#8] jonas__linden at hotmail dot com [2001-01-22 21:05:10]
Building under HP-UX11
If you are using HP ANSI C you have to add +e i.e -Aa -D_HPUX_SOURCE +e