©
이 문서에서는 PHP 중국어 웹사이트 매뉴얼 풀어 주다
(PHP 4, PHP 5, PHP 7)
imagettfbbox — 取得使用 TrueType 字体的文本的范围
$size
, float $angle
, string $fontfile
, string $text
)本函数计算并返回一个包围着 TrueType 文本范围的虚拟方框的像素大小。
size
angle
text
将被度量的角度大小。 fontfile
text
0 | 左下角 X 位置 |
1 | 左下角 Y 位置 |
2 | 右下角 X 位置 |
3 | 右下角 Y 位置 |
4 | 右上角 X 位置 |
5 | 右上角 Y 位置 |
6 | 左上角 X 位置 |
7 | 左上角 Y 位置 |
本函数同时需要 GD 库和 FreeType 库。
参见 imagettftext() 。
[#1] indraaaa34 at gmail dot com [2015-05-07 12:49:43]
The returned array order is like this:
-----------------------------
| X:4 Y:5 | X: Y:7 |
-----------------------------
| X:0 Y:1 | X:2 Y:3 |
-----------------------------
eg:
4 for the upper left X
5 for the upper left Y and so on.
[#2] user107 [2015-03-31 15:36:23]
I found a simple solution that was working for me:
<?php
if(!isset($_GET['size'])) $_GET['size'] = 44;
if(!isset($_GET['text'])) $_GET['text'] = "Hello, world!";
$size = imagettfbbox($_GET['size'], 0, "ARIAL", $_GET['text']);
$xsize = abs($size[0]) + abs($size[2]);
$ysize = abs($size[5]) + abs($size[1]);
$image = imagecreate($xsize, $ysize);
$blue = imagecolorallocate($image, 0, 0, 255);
$white = ImageColorAllocate($image, 255,255,255);
imagettftext($image, $_GET['size'], 0, abs($size[0]), abs($size[5]), $white, "ARIAL", $_GET['text']);
header("content-type: image/png");
imagepng($image);
imagedestroy($image);
?>
Here is the link with a examples:
http://www.tuxradar.com/practicalphp/11/2/6#null
[#3] rasmus at mindplay dot dk [2013-04-11 13:33:35]
It should be noted that the bounding box coordinates returned by this function are inaccurate - bug reports about this have been open for 5 years, so expect this will likely never be fixed.
More information here:
https://gist.github.com/mindplay-dk/4429153
[#4] go4christian at gmail dot com [2012-07-31 15:02:29]
Automatic line breaks: This simple function is able automatically create line breaks if you want to write a text on an image. All you have to specify is a maximum length.
<?php
function write_multiline_text($image, $font_size, $color, $font, $text, $start_x, $start_y, $max_width)
{
//split the string
//build new string word for word
//check everytime you add a word if string still fits
//otherwise, remove last word, post current string and start fresh on a new line
$words = explode(" ", $text);
$string = "";
$tmp_string = "";
for($i = 0; $i < count($words); $i++)
{
$tmp_string .= $words[$i]." ";
//check size of string
$dim = imagettfbbox($font_size, 0, $font, $tmp_string);
if($dim[4] < $max_width)
{
$string = $tmp_string;
} else {
$i--;
$tmp_string = "";
imagettftext($image, 11, 0, $start_x, $start_y, $color, $font, $string);
$string = "";
$start_y += 22; //change this to adjust line-height. Additionally you could use the information from the "dim" array to automatically figure out how much you have to "move down"
}
}
imagettftext($image, 11, 0, $start_x, $start_y, $color, $font, $string); //"draws" the rest of the string
?>
[#5] magnum dot tc dot mr at gmail dot com [2012-06-07 22:50:48]
Please note that the 3rd argument is really a "path".
<?php
imagettfbbox(10, 0, 'arial.ttf', 'Hello, World!'); // will result in "Warning: imagettfbbox(): Could not find/open font in ...php on line ..."
?>
use instead something like this:
<?php imagettfbbox(10, 0, './arial.ttf', 'Hello, World!'); ?>
or
<?php imagettfbbox(10, 0, getcwd().'/arial.ttf', 'Hello, World!'); ?>
[#6] Anonymous [2012-05-04 13:29:00]
It seems to be worth pointing out that the "points" unit GD2 is using corresponds to 96 dpi, as defined in gd.h:
#define GD_RESOLUTION 96
So if you want to translate the bbox back to font points, you need to multiply all coordinates by 72/96 = 3/4.
[#7] jodybrabec at gmail dot com [2011-08-30 15:39:42]
Very CLEAR version of func., with example....
<?php
function calculateTextBox($text,$fontFile,$fontSize,$fontAngle) {
$rect = imagettfbbox($fontSize,$fontAngle,$fontFile,$text);
$minX = min(array($rect[0],$rect[2],$rect[4],$rect[6]));
$maxX = max(array($rect[0],$rect[2],$rect[4],$rect[6]));
$minY = min(array($rect[1],$rect[3],$rect[5],$rect[7]));
$maxY = max(array($rect[1],$rect[3],$rect[5],$rect[7]));
return array(
"left" => abs($minX) - 1,
"top" => abs($minY) - 1,
"width" => $maxX - $minX,
"height" => $maxY - $minY,
"box" => $rect
);
}
// Example usage - gif image output
$text_string = "Hullo World";
$font_ttf = "./fonts/arial.ttf";
$font_size = 22;
$text_angle = 0;
$text_padding = 10; // Img padding - around text
$the_box = calculateTextBox($text_string, $font_ttf, $font_size, $text_angle);
$imgWidth = $the_box["width"] + $text_padding;
$imgHeight = $the_box["height"] + $text_padding;
$image = imagecreate($imgWidth,$imgHeight);
imagefill($image, imagecolorallocate($image,200,200,200));
$color = imagecolorallocate($image,0,0,0);
imagettftext($image,
$font_size,
$text_angle,
$the_box["left"] + ($imgWidth / 2) - ($the_box["width"] / 2),
$the_box["top"] + ($imgHeight / 2) - ($the_box["height"] / 2),
$color,
$font_ttf,
$text_string);
header("Content-Type: image/gif");
imagegif($image);
imagedestroy($image);
?>
[ remember: No spaces before or after the
<?php ... ?>
tag, because of header() call, you Roast! ]
[#8] phpcity at phpcountry dot net [2011-05-18 06:21:58]
I could in no way reproduce this function's example if I was to use any accented letter.
Replacing imagecreatetruecolor by imagecreate worked correctly with accents.
[#9] Andrey Zakharov [2011-01-04 15:16:57]
For mixed text drawing on image, height given by this function is useless and leads to text's hip-hops over the baseline .
I will use just this:
<?php
$size = 12;//font height
$font = 'Arial';// your font
$char = 'Test';
$char = 'With W';
$char = 'without w but with p and y and q';
$rect = imagettfbbox($size, 0, $font, $char);
$image_height =abs( $rect[7] );//do no respect bottom margin
$imw = $rect[2] - $rect[0]; //as usual
$bx = abs( $rect[ 0 ] ); // X offset
$by = $size * 1.25; // Y offset - we will use const LINEHEIGHT
?>
[#10] a2hansolo at gmail dot com [2010-12-22 23:29:49]
measure bg image size, wrap text to fit image width
<?php
$mx = imagesx($main_img);
$my = imagesy($main_img);
//TEXT VARS/////////
$main_text = ;
$main_text_size = ;
$main_text_x = ($mx/2);
$main_text_color = imagecolorallocate($main_img, $main_text_red, $main_text_green, $main_text_blue);
$words = explode(' ', $main_text);
$lines = array($words[0]);
$currentLine = 0;
for($i = 1; $i < count($words); $i++)
{
$lineSize = imagettfbbox($main_text_size, 0, $mt_f, $lines[$currentLine] . ' ' . $words[$i]);
if($lineSize[2] - $lineSize[0] < $mx)
{
$lines[$currentLine] .= ' ' . $words[$i];
}
else
{
$currentLine++;
$lines[$currentLine] = $words[$i];
}
}
$line_count = 1;
// Loop through the lines and place them on the image
foreach ($lines as $line)
{
$line_box = imagettfbbox($main_text_size, 0, $mt_f, "$line");
$line_width = $line_box[0]+$line_box[2];
$line_height = $line_box[1]-$line_box[7];
$line_margin = ($mx-$line_width)/2;
$line_y = (($line_height+12) * $line_count);
imagettftext($main_img, $main_t_s, 0, $line_margin, $line_y, $main_text_color, $mt_f, $line);
// Increment Y so the next line is below the previous line
$line_count ++;
}
?>
[#11] blackbart at simail dot it [2010-04-15 11:12:18]
I wrote a simple function that calculates the *exact* bounding box (single pixel precision).
The function returns an associative array with these keys:
left, top: coordinates you will pass to imagettftext
width, height: dimension of the image you have to create
<?php
function calculateTextBox($font_size, $font_angle, $font_file, $text) {
$box = imagettfbbox($font_size, $font_angle, $font_file, $text);
if( !$box )
return false;
$min_x = min( array($box[0], $box[2], $box[4], $box[6]) );
$max_x = max( array($box[0], $box[2], $box[4], $box[6]) );
$min_y = min( array($box[1], $box[3], $box[5], $box[7]) );
$max_y = max( array($box[1], $box[3], $box[5], $box[7]) );
$width = ( $max_x - $min_x );
$height = ( $max_y - $min_y );
$left = abs( $min_x ) + $width;
$top = abs( $min_y ) + $height;
// to calculate the exact bounding box i write the text in a large image
$img = @imagecreatetruecolor( $width << 2, $height << 2 );
$white = imagecolorallocate( $img, 255, 255, 255 );
$black = imagecolorallocate( $img, 0, 0, 0 );
imagefilledrectangle($img, 0, 0, imagesx($img), imagesy($img), $black);
// for sure the text is completely in the image!
imagettftext( $img, $font_size,
$font_angle, $left, $top,
$white, $font_file, $text);
// start scanning (0=> black => empty)
$rleft = $w4 = $width<<2;
$rright = 0;
$rbottom = 0;
$rtop = $h4 = $height<<2;
for( $x = 0; $x < $w4; $x++ )
for( $y = 0; $y < $h4; $y++ )
if( imagecolorat( $img, $x, $y ) ){
$rleft = min( $rleft, $x );
$rright = max( $rright, $x );
$rtop = min( $rtop, $y );
$rbottom = max( $rbottom, $y );
}
// destroy img and serve the result
imagedestroy( $img );
return array( "left" => $left - $rleft,
"top" => $top - $rtop,
"width" => $rright - $rleft + 1,
"height" => $rbottom - $rtop + 1 );
}
?>
[#12] peterjwest3 at gmail dot com [2010-04-08 06:18:04]
As many of you know, this function is bugged in several versions of PHP. It should return the coordinates relative to the baseline of the font. So if your text includes characters like g and p then the bounding box should extend below zero on the Y axis, however it doesn't. This is a problem because imagettftext() positions text using the baseline, so all your text will be misaligned.
My solution is to create an image of the desired font and font-size using all ascii characters with imagettfbbox() and imagettftext(). The height of this image is used as the height for the real image.
I then analyse the image to get the vertical offset of the text (the background color should be $baseColor)
<?php
function getYOffset($image, $baseColor) {
for($y = 0; $y < $this->height(); $y++)
for($x = 0; $x < $this->width(); $x++)
if (imagecolorat($image, $x, $y) !== $baseColor)
return $y; }
?>
This offset can be used as the baseline for the font (for this font-size). You can use a similar trick for the horizontal offset, but that changes depending on the first character.
[#13] hkc@taiwan [2009-08-22 00:57:08]
I want to output a bounding box of a text as an image straightly. I did like this:
<?php
";
$text = "<?php echo \"hello, world\"; ?>
$font = "./arial.ttf";
$size = "60";
$bbox = imagettfbbox($size, 0, $font, $text);
$width = abs($bbox[2] - $bbox[0]);
$height = abs($bbox[7] - $bbox[1]);
$image = imagecreatetruecolor($width, $height);
$bgcolor = imagecolorallocate($image, 255, 255, 255);
$color = imagecolorallocate($image, 0, 0, 0);
$x = $bbox[0] + ($width / 2) - ($bbox[4] / 2);
$y = $bbox[1] + ($height / 2) - ($bbox[5] / 2);
imagefilledrectangle($image, 0, 0, $width - 1, $height - 1, $bgcolor);
imagettftext($image, $size, 0, $x, $y, $color, $font, $text);
$last_pixel= imagecolorat($image, 0, 0);
for ($j = 0; $j < $height; $j++)
{
for ($i = 0; $i < $width; $i++)
{
if (isset($blank_left) && $i >= $blank_left)
{
break;
}
if (imagecolorat($image, $i, $j) !== $last_pixel)
{
if (!isset($blank_top))
{
$blank_top = $j;
}
$blank_left = $i;
break;
}
$last_pixel = imagecolorat($image, $i, $j);
}
}
$x -= $blank_left;
$y -= $blank_top;
imagefilledrectangle($image, 0, 0, $width - 1, $height - 1, $bgcolor);
imagettftext($image, $size, 0, $x, $y, $color, $font, $text);
header('Content-type: image/png');
imagepng($image);
imagedestroy($image);
?>
[#14] alvaro at demogracia dot com [2009-05-22 03:35:48]
If $fontfile is a Windows UNC path, it *must* start with //SERVER rather than \\SERVER:
<?php
imagettfbbox(10, 0, '\\\\server\\path\\file.ttf', 'Hello, World!'); // Warning: imagettfbbox() [http://es.php.net/function.imagettfbbox]: Could not find/open font
?>
[#15] Dario [2009-05-05 19:09:49]
My solution to below-baseline characters is to simply apply a smaller angle and some padding when calculating your boundaries, so the function thinks your text goes below baseline. For example:
<?php
// GET BOUNDS OF TEXT
$bounds = imagettfbbox($size*1.05, $angle-3, $font, $text);
?>
[#16] Anonymous [2008-11-06 11:18:32]
SIMPLE OVERLOADED FUNCTION: Adds TTF Center and Right Alignment to co ordintate points.
Correctly demonstrates the use of the bouning box TTF function and the array of coordinates that it returns.
After obtaining values and adjusting based on a set of values [L, C, R], it uses simple math based of the length of the text to move it from the origin (x = 0 )
<?php
function imagettftextalign($image, $size, $angle, $x, $y, $color, $font, $text, $alignment='L')
{
//check width of the text
$bbox = imagettfbbox ($size, $angle, $font, $text);
$textWidth = $bbox[2] - $bbox[0];
switch ($alignment) {
case "R":
$x -= $textWidth;
break;
case "C":
$x -= $textWidth / 2;
break;
}
//write text
imagettftext ($image, $size, $angle, $x, $y, $color, $font, $text);
}
?>
[#17] decimealgo at gmail dot com [2008-10-04 10:11:41]
This is a function which reformats a text string into a text block of a given width.
Usefull when you have a long single line string and want to fit it into a fixed width but don't care about it's height
<?php
function makeTextBlock($text, $fontfile, $fontsize, $width)
{
$words = explode(' ', $text);
$lines = array($words[0]);
$currentLine = 0;
for($i = 1; $i < count($words); $i++)
{
$lineSize = imagettfbbox($fontsize, 0, $fontfile, $lines[$currentLine] . ' ' . $words[$i]);
if($lineSize[2] - $lineSize[0] < $width)
{
$lines[$currentLine] .= ' ' . $words[$i];
}
else
{
$currentLine++;
$lines[$currentLine] = $words[$i];
}
}
return implode("\n", $lines);
}
?>
[#18] beosman at gmail dot com [2008-08-22 09:00:40]
I was viewing the code for calculate the box of a text for a given font but I do not found one that works fine with different angles from zero, so I have made a function simpler than above:
<?php
function calculateTextBox($text,$fontFile,$fontSize,$fontAngle) {
$rect = imagettfbbox($fontSize,$fontAngle,$fontFile,$text);
$minX = min(array($rect[0],$rect[2],$rect[4],$rect[6]));
$maxX = max(array($rect[0],$rect[2],$rect[4],$rect[6]));
$minY = min(array($rect[1],$rect[3],$rect[5],$rect[7]));
$maxY = max(array($rect[1],$rect[3],$rect[5],$rect[7]));
return array(
"left" => abs($minX),
"top" => abs($minY),
"width" => $maxX - $minX,
"height" => $maxY - $minY,
"box" => $rect
);
}
?>
With this function you can center an angled string in any image:
<?php
$mystring = "Hello world!";
$imgWidth = 300;
$imgHeight = 150;
$image = imagecreate($imgWidth,$imgHeight);
imagefill($image,imagecolorallocate($image,200,200,200));
$box = calculateTextBox($mystring,"./Verdana.ttf",15,45);
$color = imagecolorallocate($image,0,0,0);
imagettftext($image,
15,
45,
$box["left"] + ($imgWidth / 2) - ($box["width"] / 2),
$box["top"] + ($imgHeight / 2) - ($box["height"] / 2),
$color,
"./Verdana.ttf",
$mystring);
header("Content-Type: image/x-png");
imagepng($im);
imagedestroy($im);
?>
[#19] Stefan at colulus dot com [2008-05-30 11:13:02]
I worked out a script that allows the transfer of alphanumeric data to be placed on an image. The HTML feature is img src and the php feature is imagettftext. This simple code will increment from 1 to 3 on images.
code:
<?php
//ImageCall.php -- This script will call a script to produce the image.
for($next = 1;$next < 4; $next++){
print "Image $next:<br>";
print "<img src = 'Image.php?\$text=$next'>";
print "<br><br>";
}
?>
<?php
//Image.php -- This script creates a square image and places the text on it.
// image size and color
$im = ImageCreate(77,77);
$color1 = ImageColorAllocate($im,0x66,0xCC,0x00);
$color2 = ImageColorAllocate($im,0x33,0x66,0x00);
$color3 = ImageColorAllocate($im,0x00,0x99,0x00);
$color4 = ImageColorAllocate($im,0x3D,0x3D,0x3D);
// image creation
ImageFilledRectangle($im,1,1,76,76,$color1);
ImageFilledpolygon($im, array (76,1,1,76,76,76),3,$color2);
ImageFilledRectangle($im,5,5,72,72,$color3);
// determine numeric center of image
$size = ImageTTFBBox(45,0,'impact',$_GET['$text']);
$X = (77 - (abs($size[2]- $size[0])))/2;
$Y = ((77 - (abs($size[5] - $size[3])))/2 + (abs($size[5] - $size[3])));
//places numeric information on image
ImageTTFText($im,45,0,($X-1),$Y,$color4,'impact',$_GET['$text']);
//returns completed image to calling script
Header('Content-Type: image/png');
Imagepng($im);
?>
[#20] Valentijn de Pagter [2008-05-16 10:14:30]
If you're looking for easy text alignment, you need to use the imagettfbbox() command. When given the correct parameters, it will return the boundaries of your to-be-made text field in an array, which will allow you to calculate the x and y coordinate that you need to use for centering or aligning your text.
A horizontal centering example:
<?php
$tb = imagettfbbox(17, 0, 'airlock.ttf', 'Hello world!');
?>
$tb would contain:
Array
(
[0] => 0 // lower left X coordinate
[1] => -1 // lower left Y coordinate
[2] => 198 // lower right X coordinate
[3] => -1 // lower right Y coordinate
[4] => 198 // upper right X coordinate
[5] => -20 // upper right Y coordinate
[6] => 0 // upper left X coordinate
[7] => -20 // upper left Y coordinate
)
For horizontal alignment, we need to substract the "text box's" width { $tb[2] or $tb[4] } from the image's width and then substract by two.
Saying you have a 200px wide image, you could do something like this:
<?php
$x = ceil((200 - $tb[2]) / 2); // lower left X coordinate for text
imagettftext($im, 17, 0, $x, $y, $tc, 'airlock.ttf', 'Hello world!'); // write text to image
?>
This'll give you perfect horizontal center alignment for your text, give or take 1 pixel. Have fun!
[#21] mihai.draghicioiu at gmailcom [2008-04-14 15:57:35]
To get the height for a line of text, I've found it useful to do:
<?php
$bbox = imagettfbbox($size, 0, $ttf, " \n "); // space, newline, space
$height = $bbox[3] - $bbox[5];
?>
I hope this helps. Before, I used the string "Tj", but that sometimes fell short, especially for crazy fonts.
[#22] heshan at sjtu dot edu dot cn [2008-01-07 04:18:45]
the imagettfbbox and imagettftext quirks are:
1. imagettfbbox and imagettftext have the same return value and both of them are wrong for angle not equal to zero.
2. imagettfbbox returns the correct bounding box when angle is zero.
3. the bounding box has a coordinate system that the x gets bigger from left to right and y gets bigger from top to bottom.
4. the "base point" used in imagettftext is the origin in the bounding box coordinate system.
5. when the angle is other than 0, it is actually rotated in the coordinate system with respect to the base point. so if we know the bounding box coordinate when angle is zero, we can get the new bounding box coordinate by doing the rotation by math equations manually.
6. to have pixel level accuracy, we should also be aware of another thing. suppose the axis is like this: |_|_|_|, the bounding box coordinate uses point on the vertical line while image function uses point on the horizontal line, so there is a 1 pixel difference you should take care of.
The following snippet creates minimal images containing a letter of different font and rotation angle. This is especially useful in captcha scripts.
<?php
function create_font_image( $size, $angle, $font, $char )
{
$rect = imagettfbbox( $size, 0, $font, $char );
if( 0 == $angle ) {
$imh = $rect[1] - $rect[7];
$imw = $rect[2] - $rect[0];
$bx = -1 - $rect[0];
$by = -1 - $rect[7];
} else {
$rad = deg2rad( $angle );
$sin = sin( $rad );
$cos = cos( $rad );
if( $angle > 0 ) {
$tmp = $rect[6] * $cos + $rect[7] * $sin;
$bx = -1 - round( $tmp );
$imw = round( $rect[2] * $cos + $rect[3] * $sin - $tmp );
$tmp = $rect[5] * $cos - $rect[4] * $sin;
$by = -1 - round( $tmp );
$imh = round( $rect[1] * $cos - $rect[0] * $sin - $tmp );
} else {
$tmp = $rect[0] * $cos + $rect[1] * $sin;
$bx = -1 - round( $tmp );
$imw = round( $rect[4] * $cos + $rect[5] * $sin - $tmp );
$tmp = $rect[7] * $cos - $rect[6] * $sin;
$by = -1 - round( $tmp );
$imh = round( $rect[3] * $cos - $rect[2] * $sin - $tmp );
}
}
$im = imagecreatetruecolor( $imw, $imh );
imagefill( $im, 0, 0, imagecolorallocate( $im, 255, 0, 255 ) );
imagettftext( $im, $size, $angle, $bx, $by, imagecolorallocate( $im, 0, 0, 0 ), $font, $char );
imagegif( $im, trim( $font, './' ) . ord( $char ) . $angle . '.gif' );
imagedestroy( $im );
}
$chars = 'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890';
$angles = array( -30, -20, -10, 0, 10, 20, 30 );
$fonts = array( './latinwide.ttf', './verdana.ttf', './times.ttf', './broadway.ttf' );
foreach( $angles as $angle )
foreach( $fonts as $font )
for( $i = 0; $i < strlen( $chars ); ++$i )
create_font_image( 100, $angle, $font, $chars[$i] );
?>
[#23] intuz et gmx dt de [2007-08-29 23:45:49]
I still got problems trying to rotate imagettftext using imagettfbbox.
It's position calculation is mostly wrong. So i tried to rotate ttftext with IMAGEROTATE.
As a special the result is in black fontcolor and transparent background.
Hope it helps sombody (thanks for function convertBoundingBox, reading below)
<?php
function ImgText($text,$fontsize,$font,$angle){
$im = '';
if($text){
if(!$fontsize || $fontsize < 1) $fontsize = 12;
if(!$font) $font = "fonts/arial.ttf";
$bbox = imagettfbbox($fontsize, 0, $font, $text);
$size=convertBoundingBox($bbox);
$im = ImageCreatetruecolor($size['width'],$size['height']);
$white = ImageColorAllocate($im, 255, 255, 255);
$black = ImageColorAllocate($im, 0,0,0);
imagefill ($im, 0, 0, $white );
imagettftext($im, $fontsize, 0, $size['xOffset'], $size['yOffset'], $black, $font, $text);
$im = imagerotate( $im,$angle, $white);
imagecolortransparent ($im,$white);
}else{
// No text
}
}
?>
[#24] bushj at rpi dot edu [2007-07-10 21:11:23]
Apparently the bounding box returned by imagettftext and imagettfbbox is not the same, and it appears as though imagettftext does a better job at calculating the actual bounding box (maybe because it has to render every character and it then finds out really everywhere it rendered).
So, you can create a dummy image render the text to it and get a better box. Here is an example function:
<?php
function better_imagettfbbox($size, $angle, $font, $text) {
$dummy = imagecreate(1, 1);
$black = imagecolorallocate($dummy, 0, 0, 0);
$bbox = imagettftext($dummy, $size, $angle, 0, 0, $black, $font, $text);
imagedestroy($dummy);
return $bbox;
}
?>
If you use this a lot, it would be better to keep one dummy image instead of continually creating and destroying images.
[#25] Ruquay [2007-06-04 04:12:09]
Several comments show that the output of this function is often not what is expected, especially when the text is rotated.
For those of you who'd like a visual representation of what is happening to the bounding box as the text is rotated, take a look here:
http://ruquay.com/sandbox/imagettf/
[#26] Nate Sweet [2007-06-01 12:11:21]
An improvement to the convertBoundingBox function. The previous function was completely wrong. My confusion came from characters like "1" and "_" that are rendered to the right or below the basepoint (in the font I'm using). I ended up using mike at mikeleigh dot com's function with a fix for these characters, and a "belowBasepoint" value.
<?php
function convertBoundingBox ($bbox) {
if ($bbox[0] >= -1)
$xOffset = -abs($bbox[0] + 1);
else
$xOffset = abs($bbox[0] + 2);
$width = abs($bbox[2] - $bbox[0]);
if ($bbox[0] < -1) $width = abs($bbox[2]) + abs($bbox[0]) - 1;
$yOffset = abs($bbox[5] + 1);
if ($bbox[5] >= -1) $yOffset = -$yOffset; // Fixed characters below the baseline.
$height = abs($bbox[7]) - abs($bbox[1]);
if ($bbox[3] > 0) $height = abs($bbox[7] - $bbox[1]) - 1;
return array(
'width' => $width,
'height' => $height,
'xOffset' => $xOffset, // Using xCoord + xOffset with imagettftext puts the left most pixel of the text at xCoord.
'yOffset' => $yOffset, // Using yCoord + yOffset with imagettftext puts the top most pixel of the text at yCoord.
'belowBasepoint' => max(0, $bbox[1])
);
}
?>
[#27] Nate Sweet [2007-06-01 00:07:18]
It took me some time to make full use of imagettfbbox. Hopefully the following function makes it much easier to use for others.
<?php
function convertBoundingBox ($bbox) {
if ($bbox[0] >= -1)
$leftOfBasepoint = -abs($bbox[0] + 1);
else
$leftOfBasepoint = abs($bbox[0] + 2);
$rightOfBasepoint = abs($bbox[2] - $bbox[0]);
if ($bbox[0] < -1) $rightOfBasepoint = abs($bbox[2]) + abs($bbox[0]) - 1;
$aboveBasepoint = abs($bbox[5] + 1);
$height = abs($bbox[7]) - abs($bbox[1]);
if ($bbox[3] > 0) $height = abs($bbox[7] - $bbox[1]) - 1;
$width = $leftOfBasepoint + $rightOfBasepoint;
$belowBasepoint = $height - $aboveBasepoint;
return array(
'width' => $width,
'height' => $height,
'leftOfBasepoint' => $leftOfBasepoint,
'rightOfBasepoint' => $rightOfBasepoint,
'aboveBasepoint' => $aboveBasepoint,
'belowBasepoint' => $belowBasepoint
);
}
?>
Thanks goes to mike at mikeleigh dot com for providing the core of this function.
Remember, the basepoint is the x, y coords you use to draw text with imagettftext. A useful thing to do is take a string like...
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz01234567890
...and use the "aboveBasepoint" value for the height of your font. Now you can draw lines and use "the height of your font * leading" as the distance between lines of text, where leading is a number like 1.45 (for 45% leading).
[#28] Nate Sweet [2007-05-30 01:36:03]
This script shows you side by side the difference between a font rendered at a certain size and the same font rendered at some multiple of that size and then scaled down by the same multiple. It seems to help small sizes and affects large ones less. This script lets you see if it is worth implementing for your situation. Included is the great "imagettfbboxextended" function by mike at mikeleigh dot com below.
$size = 30;
$factor = 16;
$smallSize = imagettfbboxextended($size, 0, "fonts/MPlantin.ttf", "The quick brown fox jumps over the lazy dog.");
$smallWidth = $smallSize['width'];
$smallHeight = $smallSize['height'];
$canvas = imagecreatetruecolor($smallWidth + 20, $smallHeight * 2 + 20);
imagefill($canvas, 0, 0, imagecolorallocate($canvas, 255, 255, 255));
imagettftext($canvas, $size, 0, 10 + $smallSize['x'], 10 + $smallSize['y'], imagecolorallocate($canvas, 0, 0, 0), "fonts/MPlantin.ttf", "The quick brown fox jumps over the lazy dog.");
$largeSize = imagettfbboxextended($size * $factor, 0, "fonts/MPlantin.ttf", "The quick brown fox jumps over the lazy dog.");
$largeWidth = $largeSize['width'];
$largeHeight = $largeSize['height'];
$temp = imagecreatetruecolor($largeWidth, $largeHeight);
imagefill($temp, 0, 0, imagecolorallocate($canvas, 255, 255, 255));
imagettftext($temp, $size * $factor, 0, $largeSize['x'], $largeSize['y'], imagecolorallocate($temp, 0, 0, 0), "fonts/MPlantin.ttf", "The quick brown fox jumps over the lazy dog.");
imagecopyresampled($canvas, $temp, 10 + $smallSize['x'], 10 + $smallSize['y'] + 10, 0, 0, $smallWidth, $smallHeight, $largeWidth, $largeHeight);
imagepng($temp, "temp.png");
imagepng($canvas, "test.png");
function imagettfbboxextended($size, $angle, $fontfile, $text) {
$bbox = imagettfbbox($size, $angle, $fontfile, $text);
//calculate x baseline
if($bbox[0] >= -1) {
$bbox['x'] = abs($bbox[0] + 1) * -1;
} else {
//$bbox['x'] = 0;
$bbox['x'] = abs($bbox[0] + 2);
}
//calculate actual text width
$bbox['width'] = abs($bbox[2] - $bbox[0]);
if($bbox[0] < -1) {
$bbox['width'] = abs($bbox[2]) + abs($bbox[0]) - 1;
}
//calculate y baseline
$bbox['y'] = abs($bbox[5] + 1);
//calculate actual text height
$bbox['height'] = abs($bbox[7]) - abs($bbox[1]);
if($bbox[3] > 0) {
$bbox['height'] = abs($bbox[7] - $bbox[1]) - 1;
}
return $bbox;
}
[#29] mike at mikeleigh dot com [2007-05-28 07:05:00]
I have been testing this function for a while now and have come up with many of the same issues that other people have touched upon. Not being able to calculate the width of the text correctly. Or if a solution is found then it won't work with a hanging letter or a negative start letter like 'j'.
Like Ralph I also wanted to draw a box around some text and this would require me being pixel perfect with the font. The trouble is I did not know which font would be used or which size. This led me to come up with a solution which I am sharing below.
<?php
function imagettfbboxextended($size, $angle, $fontfile, $text) {
$bbox = imagettfbbox($size, $angle, $fontfile, $text);
//calculate x baseline
if($bbox[0] >= -1) {
$bbox['x'] = abs($bbox[0] + 1) * -1;
} else {
//$bbox['x'] = 0;
$bbox['x'] = abs($bbox[0] + 2);
}
//calculate actual text width
$bbox['width'] = abs($bbox[2] - $bbox[0]);
if($bbox[0] < -1) {
$bbox['width'] = abs($bbox[2]) + abs($bbox[0]) - 1;
}
//calculate y baseline
$bbox['y'] = abs($bbox[5] + 1);
//calculate actual text height
$bbox['height'] = abs($bbox[7]) - abs($bbox[1]);
if($bbox[3] > 0) {
$bbox['height'] = abs($bbox[7] - $bbox[1]) - 1;
}
return $bbox;
}
?>
The function above gives the correct x and y coordinates that the text should be drawn from and also gives the actual image width and height. This has been tested with various fonts and sizes ranging from 6 up to 144 points. Some of the output will appear to be incorrect and have an extra pixel on the right, using verdana at size 144 and outputting the character 'Q' for example. This is not an error as this is part of the anti-aliasing of the font output.
Example Usage:
<?php
$font = 'c:\windows\fonts\verdana.ttf';
$font_size = 144;
$text = 'j?yZgQ';
$bbox = imagettfbboxextended($font_size, 0, $font, $text);
?>
Return Values:
Array
(
[0] => -8
[1] => 40
[2] => 715
[3] => 40
[4] => 715
[5] => -177
[6] => -8
[7] => -177
[x] => 6
[width] => 722
[y] => 176
[height] => 216
)
Further notes can be found here along with images of the output of the function http://mikeleigh.com/links/imagettfbbox
[#30] lassial dot gmail dot com [2007-05-24 04:46:16]
Ralph Bolton commented about the difference in calculating the bounding box size vs. aligning text base line.
The workaround for this issue is to calculate the difference in height between a character going below baseline and one above the baseline. This is likely going to vary from font to font, so I'd suggest something like this:
<?php
function fontBaselineOffset($font, $fontSize)
{
//this should be above baseline
$test2="H";
//some of these additional letters should go below it
$test3="Hjgqp";
//get the dimension for these two:
$box2 = imageTTFBbox($fontSize,0,$font,$test2);
$box3 = imageTTFBbox($fontSize,0,$font,$test3);
//return the offset value
return abs((abs($box2[5]) + abs($box2[1])) - (abs($box3[5]) + abs($box3[1])));
}
?>
This is not perfect yet. You should define a range of allowed characters that can go below baseline, compare them to the ones actually found in your string and use them instead of the string $test3 used in the example function above. This should avoid problems with letters that go further below baseline than the others (e.g. there could be a difference between 'g' and 'p')
[#31] ralphbolton at mail2sexy dot com [2007-04-23 09:16:40]
There's a bit of an annoyance with measuring font sizes and drawing boxes around text. When fonts are measured using ImageTTFbbox, the correct vertical height is returned. That is, the measurement of the phrase "Hanging" will be from the top of the "H" to the bottom of the "g".
The problem is that functions like imageTTFtext align with the "line" of the text - that is, in the phrase "Hanging", the alignment is below the "H", not the bottom of the "g". That means that if you draw a rectangle behind your text, it'll be incorrectly aligned because the hanging "g" will be outside the box.
For example, this doesn't work as you might expect (because the "g" hangs below the box):
<?php
// Get the size of the font box
$textbox = imageTTFBbox($size, 0, $font, 'Hanging');
$textwidth = abs($textbox[4] - $textbox[0]);
$textheight = abs($textbox[5] - $textbox[1]);
// Now draw a rectangle on the image
$colour = ImageColorAllocate($im, 100, 100, 100);
imagefilledrectangle($im, $x, $y - $textheight, $x + $textwidth, $y, $colour );
// Now draw the text
$black = ImageColorAllocate($im, 0, 0, 0);
ImageTTFText($image['resource'], $size, 0, $x, $y, $black, $font, 'Hanging');
?>
It also seems that the rectangle in the above example is located 1 pixel to the left of the text.
I haven't found a way to resolve this problem correctly. Instead, I have enlarged the rectangle and then put the text into it. I don't think this will work absolutely correctly for all fonts, so it's not exactly a perfect solution. However, it's better than nothing! Here is a snippet of it:
<?php
$enlargex = $textwidth * 0.08;
$enlargey = $textheight * 0.1;
$enlargey2 = $textheight * 0.5;
// Now draw a rectangle on the image
$colour = ImageColorAllocate($im, 100, 100, 100);
imagefilledrectangle($im, $x - $enlargex, $y - $textheight - $enlargey, $x + $textwidth + $enlargex, $y + $enlarge2, $colour );
?>
[#32] marclaz [2006-07-31 06:13:00]
Please note that as imageTTFBbox and imageTTFText functions return an array of coordinates which could be negative numbers care must be taken with height and width calculations.
The rigth way to do that is to use the abs() function:
for an horizontal text:
$box = @imageTTFBbox($size,0,$font,$text);
$width = abs($box[4] - $box[0]);
$height = abs($box[5] - $box[1]);
Then to center your text at ($x,$y) position the code should be like that:
$x -= $width/2;
$y += $heigth/2;
imageTTFText($img,$size,0,$x,$y,$color,$font,$text);
this because (0,0) page origin is topleft page corner and (0,0) text origin is lower-left readable text corner.
Hope this help.
[#33] Nimja [2006-05-08 01:09:47]
Warning:
james.logsdon's function has a few flaws in copying my own function. Though he did a great job in making an overall nicer looking function it does have a few flaws.
His function does not allow for long words (longer then the width) linebreaks (harder then it looks) and has a non-pixel perfect location.
The problem with the imagettfbbox function is that different letters give a different x/y top-left coordinate. At least it looks that way for the eye. I 'solved' this by putting a space in front of every line and then offset the text by the width of that space.
So, although some things of my function seem useless they do serve an important purpose.
[#34] james.logsdon at firesidemedia dot net [2006-05-05 13:32:08]
I've modified Nimja's function a little. It doesn't support line-breaks (didn't need it in my script), but it's easy enough to add in.
<?php
function imageWordWrapBBox ( $Text, $Width = 650, $FontSize = 10, $Font = './fonts/arial.ttf' )
{
$Words = split ( ' ', $Text );
$Lines = array ( );
$Line = '';
foreach ( $Words as $Word )
{
$Box = imagettfbbox ( $FontSize, 0, $Font, $Line . $Word );
$Size = $Box[4] - $Box[0];
if ( $Size > $Width )
{
$Lines[] = trim ( $Line );
$Line = '';
}
$Line .= $Word . ' ';
}
$Lines[] = trim ( $Line );
$Dimensions = imagettfbbox ( $FontSize, 0, $Font, 'AJLMYabdfghjklpqry019`@$^&*(,' );
$lineHeight = $Dimensions[1] - $Dimensions[5];
return array ( $lineHeight, $Lines, $lineHeight * count ( $Lines ) );
}
function imageWordWrap ( $Text, $Width, $Color, $X = 0, $Y = 0, $FontSize = 10, $Font = './fonts/arial.ttf' )
{
$Data = $this->imageWordWrapBBox ( $Text, $Width, $FontSize, $Font );
foreach ( $Data[1] as $Key => $Line )
{
$locX = $X;
$locY = $Y + ( $Key * $Data[0] );
imagettftext ( $this->Image, $FontSize, 0, $locX, $locY, $Color, $Font, $Line );
}
return $Data;
}
?>
[#35] toe dot cutter at telia dot com [2006-02-28 07:41:18]
Neither Greg's or Henrik N's code worked for me.
I figured out that imagettfbbox gives the size (coordinates) of the whole letter (ie. with the hang on 'g' or 'j'). So it was only a matter of finding the correct index of coordinates in the array.
Note: This doesn't work on Times New Roman Italic's 'f' for some reason.
<?php
$size = imagettfbbox($fontsize, 0, $font, $text);
$dx = abs($size[2]-$size[0]);
$dy = abs($size[5]-$size[3]);
ImageTTFText($im, $fontsize, 0, abs($size[6]), abs($size[5]), $txtcolor, $font, $text);
?>
[#36] Henrik N [2006-02-26 01:48:15]
Tried Greg's code below, but it didn't quite work for me. This did, however:
<?php
$size = imagettfbbox($fontSize, 0, $font, $text);
$width = $size[2] + $size[0];
$height = abs($size[1]) + abs($size[7]);
$image = imagecreatetruecolor($width, $height);
imagettftext($image, $fontSize, 0, 0, abs($size[5]), $black, $font, $text);
?>
[#37] greg at gregoryfenton dot be [2006-02-11 14:23:24]
Have a problem with imagettfbbox cutting off the hang of letters such as 'g' or 'j'??
After days trying to figure this thing out, I finally cracked it:
$size = imagettfbbox($s,0,$font,$text);
$dx=abs($size[0])+abs($size[2]);
$dy=abs($size[1])+abs($size[7]);
ImageTTFText($im, $s, 0, $dx-abs($size[0]), $dy-abs($size[1]), $black, $font, $text);
The key is the abs commands - you must account for the negative numbers in the original imagettfbbox, and if you have any, take them away from the location at the end when the text is displayed:
you need to start the x and y at a (possibly) negative number, not 0,0 as I had thought.
Hope that helps someone..
[#38] Nimja [2006-01-13 08:32:11]
My previous function had 2 bugs which are now fixed:
* Align is now pixel perfect, no longer dependant on the first character. Solved by putting a space " " in front of every rendered line, making the basepoint at the exact same place every time.
* X Y Coordinates are no longer the base-point, but the perfect top/left coordinates. This made my life designing a LOT easier.
Features:
* Newline support! (both Windows and Linux)
* Paragraph support, no newlines are ignored, not even empty ones. So empty lines are properly supported.
* True top/left x/y coordinates instead of TTF basepoint.(at least as close as possible).
* Align function for Left, Center and Right
* Support for words that are longer then the supported width.
<?php
//A function for pixel precise text Wrapping
function imageTextWrapped(&$img, $x, $y, $width, $font, $color, $text, $textSize, $align="l") {
//Recalculate X and Y to have the proper top/left coordinates instead of TTF base-point
$y += $textSize;
$dimensions = imagettfbbox($textSize, 0, $font, " "); //use a custom string to get a fixed height.
$x -= $dimensions[4]-$dimensions[0];
$text = str_replace ("\r", '', $text); //Remove windows line-breaks
$srcLines = split ("\n", $text); //Split text into "lines"
$dstLines = Array(); // The destination lines array.
foreach ($srcLines as $currentL) {
$line = '';
$words = split (" ", $currentL); //Split line into words.
foreach ($words as $word) {
$dimensions = imagettfbbox($textSize, 0, $font, $line.$word);
$lineWidth = $dimensions[4] - $dimensions[0]; // get the length of this line, if the word is to be included
if ($lineWidth > $width && !empty($line) ) { // check if it is too big if the word was added, if so, then move on.
$dstLines[] = ' '.trim($line); //Add the line like it was without spaces.
$line = '';
}
$line .= $word.' ';
}
$dstLines[] = ' '.trim($line); //Add the line when the line ends.
}
//Calculate lineheight by common characters.
$dimensions = imagettfbbox($textSize, 0, $font, "MXQJPmxqjp123"); //use a custom string to get a fixed height.
$lineHeight = $dimensions[1] - $dimensions[5]; // get the heightof this line
$align = strtolower(substr($align,0,1)); //Takes the first letter and converts to lower string. Support for Left, left and l etc.
foreach ($dstLines as $nr => $line) {
if ($align != "l") {
$dimensions = imagettfbbox($textSize, 0, $font, $line);
$lineWidth = $dimensions[4] - $dimensions[0]; // get the length of this line
if ($align == "r") { //If the align is Right
$locX = $x + $width - $lineWidth;
} else { //If the align is Center
$locX = $x + ($width/2) - ($lineWidth/2);
}
} else { //if the align is Left
$locX = $x;
}
$locY = $y + ($nr * $lineHeight);
//Print the line.
imagettftext($img, $textSize, 0, $locX, $locY, $color, $font, $line);
}
}
?>
[#39] Nimja [2006-01-13 06:01:31]
This is a completely rewritten function of "printWordWrapped" because it lacked a few important features. First of all, it started too high with it's text, which was easily fixed. And it has the annoying 'feature' of adding a space in front of every line. Not ideal.
But secondly, and more importantly, it didn't support long words or linebreaks. This is all fixed. And I rewrote it for cleaner code.
Please note that with the current code you could easily make a vertical align as well if you wanted to. I have not done this myself since it did not fit my own needs (and I'm slightly lazy)
Enjoy:
<?php
function imageTextWrapped(&$img, $x, $y, $width, $font, $color, $text, $textSize, $align="l") {
$y += $fontSize; //Correct place for the fonts.
$text = str_replace ("\\r", '', $text); //Remove windows line-breaks
$srcLines = split ("\\n", $text); //Split text into "lines"
$dstLines = Array(); // The destination lines array.
foreach ($srcLines as $currentL) {
$line = '';
$words = split (" ", $currentL); //Split line into words.
foreach ($words as $word) {
$dimensions = imagettfbbox($textSize, 0, $font, $line.' '.$word);
$lineWidth = $dimensions[4] - $dimensions[0]; // get the length of this line, if the word is to be included
if ($lineWidth > $width && !empty($line) ) { // check if it is too big if the word was added, if so, then move on.
$dstLines[] = trim($line); //Add the line like it was without spaces.
$line = '';
}
$line .= $word.' ';
}
$dstLines[] = trim($line); //Add the line when the line ends.
}
//Calculate lineheight by common characters.
$dimensions = imagettfbbox($textSize, 0, $font, "MXQJPmxqjp123"); //use a custom string to get a fixed height.
$lineHeight = $dimensions[1] - $dimensions[5]; // get the heightof this line
$align = strtolower(substr($align,0,1)); //Takes the first letter and converts to lower string. Support for Left, left and l etc.
foreach ($dstLines as $nr => $line) {
if ($align != "l") {
$dimensions = imagettfbbox($textSize, 0, $font, $line);
$lineWidth = $dimensions[4] - $dimensions[0]; // get the length of this line
if ($align == "r") { //If the align is Right
$locX = $x + $width - $lineWidth;
} else { //If the align is Center
$locX = $x + ($width/2) - ($lineWidth/2);
}
} else { //if the align is Left
$locX = $x;
}
$locY = $y + ($nr * $lineHeight);
//Print the line.
imagettftext($img, $textSize, 0, $locX, $locY, $color, $font, $line);
}
}
?>
[#40] peisenmann at gmail dot com [2005-12-28 18:41:31]
Another function for centered text string.
What it does: Generate a truecolor .png image of a text string. The image will be just large enough encompass the text and a 2 px border and the text will be centered in it.
It is called from any other page like so...
<img src="linkImg.php?text=php.net is great&border=out" /> // Text with #&+"'\<> will need to be escaped, but I've found spaces don't cause errors. I haven't tested this with any other languages.
The following code is the file named linkImg.php
The file was not designed to have anything else here with it, and the open and close php tags should the the very first and very last characters of the page respectively, as outside whitespace can be a little evil sometimes.
<?php
//Obtain text and border via GET
//Border can be out, in, or flat
$text = $_GET['text'];
$border = $_GET['border'];
$font = "fontpath"; //(str) "fonts/sasquatchlives.ttf"
$fontsize = font size; //(int) pixels in GD 1, or points in GD 2
//Register box
$box = imagettfbbox ($fontsize, 0, $font, $text);
//Find out the width and height of the text box
$textW = $box[2] - $box[0];
$textH= $box[3]-$box[5];
//Add padding
$paddingx = 10;
$paddingy = 10;
//Set image dimentions
$width = $textW+$paddingx;
$height= $textH+$paddingy;
//Bottom left corner of text
$textx = $paddingx/2;
$texty = $height - $paddingy/2;
//Shadow offset (pixels)
$shadoffx = 1;
$shadoffy = 1;
//Create the image
$img = imagecreatetruecolor($width,$height);
//Define some colors
$white = imagecolorallocate($img,255,255,255);
$black = imagecolorallocate($img,0,0,0);
$lightgrey = imagecolorallocate($img,200,200,200);
$grey = imagecolorallocate($img,100,100,100);
//Define Text (fg) and background (bg) colors
$bgcol = imagecolorallocate($img,192,213,196); //Celadon (light pastel green)
$fgcol = imagecolorallocate($img,243,104,88); //Peach
// Fill image with background color
imagefill($img,0,0,$bgcol);
//Write Shadow
imagettftext($img, $fontsize, 0, $textx+$shadoffx, $texty+$shadoffy, $grey, $font, $text);
//Write Text
imagettftext($img, $fontsize, 0, $textx, $texty, $fgcol, $font, $text);
//Bordering
//Embossed border (button-looking)
if ($border == "out")
{
imageline ($img,0,0,$width,0,$white);imageline ($img,0,0,0,$height,$white);
imageline ($img,1,1,$width,1,$lightgrey);imageline ($img,1,1,1,$height-1,$lightgrey);
imageline ($img,0,$height-1,$width-1,$height-1,$black);imageline ($img,$width-1,$height-1,$width-1,0,$black);
imageline ($img,2,$height-2,$width-2,$height-2,$grey);imageline ($img,$width-2,$height-2,$width-2,2,$grey);
}
//Flat border
if ($border == "flat")
{
imageline ($img,0,0,$width,0,$white);imageline ($img,0,0,0,$height,$white);
imageline ($img,1,1,$width,1,$grey);imageline ($img,1,1,1,$height-1,$grey);
imageline ($img,0,$height-1,$width-1,$height-1,$white);imageline ($img,$width-1,$height-1,$width-1,0,$white);
imageline ($img,2,$height-2,$width-2,$height-2,$grey);imageline ($img,$width-2,$height-2,$width-2,2,$grey);
}
//Engraved border (pushed button)
if ($border == "in")
{
imageline ($img,0,0,$width,0,$black);imageline ($img,0,0,0,$height,$black);
imageline ($img,1,1,$width,1,$grey);imageline ($img,1,1,1,$height-1,$grey);
imageline ($img,0,$height-1,$width-1,$height-1,$white);imageline ($img,$width-1,$height-1,$width-1,0,$white);
imageline ($img,2,$height-2,$width-2,$height-2,$lightgrey);imageline ($img,$width-2,$height-2,$width-2,2,$lightgrey);
}
// Header info
header("Content-type: image/png");
//Sends the image
imagepng($img);
imagedestroy($img);
?>
Hope this helps someone!
-Patrick-
[#41] Mickey9801 at ComicParty dot com [2005-12-11 09:31:21]
I have revised my mb_wordwrap function to fix 2 major bugs: cannot handle line break and infinite loop while handling very very long long long single byte word.
<?php
function mb_wordwrap($txt,$font,$size,$width) {
$pointer = 0; // Current character position pointer
$this_line_start = 0; // Starting character position of current line
$this_line_strlen = 1; // How long is the current line
$single_byte_stack = ""; // Variable for storing single byte word
$sbs_line_width = 0; // Pixel width of the Single byte word
$this_is_cr = FALSE; // Check if the character is new line code (ASCII=10)
$result_lines = array(); // Array for storing the return result
while ($pointer < mb_strlen($txt)) {
$this_char = mb_substr($txt,$pointer,1);
if (ord($this_char[0])==10) $this_is_cr = TRUE; // Check if it is a new line
// Check current line width
$tmp_line = mb_substr($txt, $this_line_start, $this_line_strlen);
$tmp_line_bbox = imagettfbbox($size,0,$font,$tmp_line);
$this_line_width = $tmp_line_bbox[2]-$tmp_line_bbox[0];
// Prevent to cut off english word at the end of line
// if this character is a alphanumeric character or open bracket, put it into stack
if (is_alphanumeric($this_char, $single_byte_stack)) $single_byte_stack .= $this_char;
// Check the width of single byte words
if ($single_byte_stack != "") {
$tmp_line_bbox = imagettfbbox($size,0,$font,$single_byte_stack);
$sbs_line_width = $tmp_line_bbox[2]-$tmp_line_bbox[0];
}
if ($this_is_cr || $this_line_width > $width || $sbs_line_width >= $width) {
// If last word is alphanumeric, put it to next line rather then cut it off
if ($single_byte_stack != "" && is_alphanumeric($this_char, $single_byte_stack) && $sbs_line_width < $width) {
$stack_len = mb_strlen($single_byte_stack);
$this_line_strlen = $this_line_strlen - $stack_len + 1;
$pointer = $pointer - $stack_len + 1;
}
// Move the current line to result array and reset all counter
$result_lines[] = mb_substr($txt, $this_line_start, $this_line_strlen-1);
if ($this_is_cr) { $pointer++; $this_is_cr=FALSE; }
if ($sbs_line_width >= $width) $sbs_line_width = 0;
$this_line_start = $pointer;
$this_line_strlen = 1;
$single_byte_stack = "";
} else {
if (!is_alphanumeric($this_char, $single_byte_stack)) {
$single_byte_stack = ""; // Clear stack if met multibyte character and not line end
}
$this_line_strlen++;
$pointer++;
}
}
// Move remained word to result
$result_lines[] = mb_substr($txt, $this_line_start);
return $result_lines;
}
function is_alphanumeric($character, $stack) {
if (
(ord($character)>=48 && ord($character)<=57) ||
(ord($character)>=65 && ord($character)<=91) ||
(ord($character)>=97 && ord($character)<=123) ||
ord($character)==40 ||
ord($character)==60 ||
($stack=="" && (ord($character)==34 || ord($character)==39))
) return TRUE;
else return FALSE;
}
?>
[#42] Nashev [2005-12-11 05:38:59]
see http://php.rinet.ru/manual/ru/function.imagettftext.php#57416
function ByteCount($s) {
$has_mbstring = extension_loaded('mbstring') ||@dl(PHP_SHLIB_PREFIX.'mbstring.'.PHP_SHLIB_SUFFIX);
$has_mb_shadow = (int) ini_get('mbstring.func_overload');
if ($has_mbstring && ($has_mb_shadow & 2) ) {
$size = mb_strlen($s,'latin1');
} else {
$size = strlen($s);
}
return $size;
}
function foxy_utf8_to_nce($s) {
$utf = "$s";
$max_count = 5; // flag-bits in $max_mark ( 1111 1000 == 5 times 1)
$max_mark = 248; // marker for a (theoretical ;-)) 5-byte-char and mask for a 4-byte-char;
$html = '';
$ByteCount = ByteCount($utf);
for($str_pos = 0; $str_pos < $ByteCount; $str_pos++) {
$old_chr = $utf{$str_pos};
$old_val = ord($old_chr);
$new_val = 0;
$utf8_marker = 0;
// skip non-utf-8-chars
if ($old_val > 127) {
$mark = $max_mark;
for ($byte_ctr = $max_count; $byte_ctr > 2; $byte_ctr--) {
// actual byte is utf-8-marker?
if (($old_val & $mark) == (($mark << 1) & 255)) {
$utf8_marker = $byte_ctr - 1;
break;
}
$mark = ($mark << 1) & 255;
}
}
// marker found: collect following bytes
if ($utf8_marker > 1 and isset($utf{$str_pos + 1})) {
$str_off = 0;
$new_val = $old_val & (127 >> $utf8_marker);
for($byte_ctr = $utf8_marker; $byte_ctr > 1; $byte_ctr--) {
// check if following chars are UTF8 additional data blocks
// UTF8 and ord() > 127
if( (ord($utf{$str_pos + 1}) & 192) == 128 ) {
$new_val = $new_val << 6;
$str_off++;
// no need for Addition, bitwise OR is sufficient
// 63: more UTF8-bytes; 0011 1111
$new_val = $new_val | ( ord( $utf{$str_pos + $str_off} ) & 63 );
}
// no UTF8, but ord() > 127
// nevertheless convert first char to NCE
else {
$new_val = $old_val;
}
}
// build NCE-Code
$html .= '&#'.$new_val.';';
// Skip additional UTF-8-Bytes
$str_pos = $str_pos + $str_off;
} else {
$html .= chr($old_val);
//$new_val = $old_val;
}
}
return $html;
}
[#43] Mickey9801 at ComicParty dot com [2005-11-22 12:49:16]
Most of functions shared here seems only work with western language and is not suitable for multibyte characters (like Chinese). I have written a function using mb_string functions to match the need of multibyte character word wrapping.
I also added some machanism so that English word won't be cut off at the end of line. Of couse you must use unicode string on GD.
function mb_wordwrap($txt,$font,$size,$width) {
$pointer = 0;
$this_line_start = 0;
$this_line_strlen = 1;
$single_byte_stack = "";
$result_lines = array();
while ($pointer <= mb_strlen($txt)) {
$this_char = mb_substr($txt,$pointer,1);
$tmp_line = mb_substr($txt, $this_line_start, $this_line_strlen);
$tmp_line_bbox = imagettfbbox($size,0,$font,$tmp_line);
$this_line_width = $tmp_line_bbox[2]-$tmp_line_bbox[0];
if ($this_line_width > $width) {
// If last word is alphanumeric, put it to next line rather then cut it off
if ($single_byte_stack != "") {
$stack_len = mb_strlen($single_byte_stack);
$this_line_strlen -= $stack_len;
$pointer -= $stack_len;
}
$result_lines[] = mb_substr($txt, $this_line_start, $this_line_strlen-1);
$this_line_start = $pointer;
$this_line_strlen = 1;
$single_byte_stack = "";
} else {
// Prevent to cut off english word at the end of line
// if this character is a alphanumeric character or open bracket, put it into stack
if (
(ord($this_char)>=48 && ord($this_char)<=57) ||
(ord($this_char)>=65 && ord($this_char)<=91) ||
(ord($this_char)>=97 && ord($this_char)<=123) ||
ord($this_char)==40 ||
ord($this_char)==60 ||
($single_byte_stack=="" && (ord($this_char)==34 || ord($this_char)==39))
) $single_byte_stack .= $this_char;
else $single_byte_stack = ""; // Clear stack if met multibyte character and not line end
$this_line_strlen++;
$pointer++;
}
}
// Move remained word to result
$result_lines[] = mb_substr($txt, $this_line_start);
return $result_lines;
}
[#44] Info at GravoMaster dot com [2005-11-04 08:01:50]
TTF character charmap page
Could use some help in reading ttf file
so that unused rectangle chars are filtered out of the charmap
see
http://www.phpenabled.com/ttf_fontlist/
fontlist.php?font=Phones_NormalA.ttf
[#45] c.scheffers [gmail] [2005-08-14 13:15:20]
I would like to post a small modification to the imageprintWordWrapped() posted below also.
The following code causes each line to start with a space, which results in the incorrect alignment of text:
$line .= ' '.$words[0]; // add the word to the current sentence
A (quick) fix for this problem:
$line .= ($line != '' ? ' ' : '').$words[0]; // add the word to the current sentence
[#46] fernandez_marce at yahoo dot com [2005-08-03 10:53:52]
I would modify the last function imageprintWordWrapped() posted below. When it says:
// do the actual printing
$i = 0;
$i should be equal to 1, because if $top is greater than 0, the imagettftext() call will not work for the first element in the $lines array ($top + lineHeight*$i) == $top when $i=0!
imagettftext($image, $textSize, 0, $leftStart, $top + $lineHeight * $i, $color, $font, $line);
$i++;
To sum up, replace
// do the actual printing
$i = 0;
with:
// do the actual printing
$i = 1;
Cheers,
Marcelo
[#47] thetorpedodog [gmail] [2005-07-28 09:09:23]
Just for the sake of consistency, I turned Miles' function into one that takes a $right value rather than a $maxWidth value. This makes it like all the other image* functions.
<?php
function imageprintWordWrapped(&$image, $top, $left, $right, $font, $color, $text, $textSize, $halign="left") {
$maxWidth = $right - $left ; //the trivial change
$words = explode(' ', strip_tags($text)); // split the text into an array of single words
$line = '';
while (count($words) > 0) {
$dimensions = imagettfbbox($textSize, 0, $font, $line.' '.$words[0]);
$lineWidth = $dimensions[2] - $dimensions[0]; // get the length of this line, if the word is to be included
if ($lineWidth > $maxWidth) { // if this makes the text wider that anticipated
$lines[] = $line; // add the line to the others
$line = ''; // empty it (the word will be added outside the loop)
}
$line .= ' '.$words[0]; // add the word to the current sentence
$words = array_slice($words, 1); // remove the word from the array
}
if ($line != '') { $lines[] = $line; } // add the last line to the others, if it isn't empty
$lineHeight = $dimensions[1] - $dimensions[7]; // the height of a single line
$height = count($lines) * $lineHeight; // the height of all the lines total
// do the actual printing
$i = 0;
//print_R($widths);
foreach ($lines as $line) {
if($halign=="center") {
//figure out width of line
$dimensions = imagettfbbox($textSize, 0, $font, $line);
$lineWidth = $dimensions[2] - $dimensions[0];
//figure out where the center is.
$center=floor($maxWidth/2 + $left);
$leftStart=$center-$lineWidth/2;
} else if ($halign=="right") {
//figure out width of line
$dimensions = imagettfbbox($textSize, 0, $font, $line);
$lineWidth = $dimensions[2] - $dimensions[0];
$leftStart=$left+$maxWidth-$lineWidth;
} else {
$leftStart=$left;
}
imagettftext($image, $textSize, 0, $leftStart, $top + $lineHeight * $i, $color, $font, $line);
$i++;
}
return $height;
}
?>
[#48] miles at dinewilmingtononline dot com [2005-07-12 18:29:48]
Here is a slight modification to the function posted below that vegard posted that allows for left, right or center alignment within the text boxes.
$halign has a default of left. center, and right can also be put in.
<?php
function printWordWrapped(&$image, $top, $left, $maxWidth, $font, $color, $text, $textSize, $halign="left") {
$words = explode(' ', strip_tags($text)); // split the text into an array of single words
$line = '';
while (count($words) > 0) {
$dimensions = imagettfbbox($textSize, 0, $font, $line.' '.$words[0]);
$lineWidth = $dimensions[2] - $dimensions[0]; // get the length of this line, if the word is to be included
if ($lineWidth > $maxWidth) { // if this makes the text wider that anticipated
$lines[] = $line; // add the line to the others
$line = ''; // empty it (the word will be added outside the loop)
}
$line .= ' '.$words[0]; // add the word to the current sentence
$words = array_slice($words, 1); // remove the word from the array
}
if ($line != '') { $lines[] = $line; } // add the last line to the others, if it isn't empty
$lineHeight = $dimensions[1] - $dimensions[7]; // the height of a single line
$height = count($lines) * $lineHeight; // the height of all the lines total
// do the actual printing
$i = 0;
//print_R($widths);
foreach ($lines as $line) {
if($halign=="center") {
//figure out width of line
$dimensions = imagettfbbox($textSize, 0, $font, $line);
$lineWidth = $dimensions[2] - $dimensions[0];
//figure out where the center is.
$center=floor($maxWidth/2 + $left);
$leftStart=$center-$lineWidth/2;
} else if ($halign=="right") {
//figure out width of line
$dimensions = imagettfbbox($textSize, 0, $font, $line);
$lineWidth = $dimensions[2] - $dimensions[0];
$leftStart=$left+$maxWidth-$lineWidth;
} else {
$leftStart=$left;
}
imagettftext($image, $textSize, 0, $leftStart, $top + $lineHeight * $i, $color, $font, $line);
$i++;
}
return $height;
}
?>
[#49] info at rainer-schuetze dot de [2005-06-10 21:32:41]
[#50] php@da dot mcbf dot net [2005-04-30 19:37:44]
Pretty trivial, but still might save someone some trouble: on my system (Debian Linux), the absolute path to the font file had to be specified. I tried it relative to the current webpage and that did not work.
[#51] vegard at I dot DONT dot WANT dot SPAM dot programmer dot no [2005-04-04 06:37:43]
Here is a function that wordwraps text you want to print, allows to specify where the text should be printed, what the maximum width should be, and returns the height used.
<?php
function printWordWrapped(&$image, $top, $left, $maxWidth, $font, $color, $text, $textSize) {
$words = explode(' ', strip_tags($text)); // split the text into an array of single words
$line = '';
while (count($words) > 0) {
$dimensions = imagettfbbox($textSize, 0, $font, $line.' '.$words[0]);
$lineWidth = $dimensions[2] - $dimensions[0]; // get the length of this line, if the word is to be included
if ($lineWidth > $maxWidth) { // if this makes the text wider that anticipated
$lines[] = $line; // add the line to the others
$line = ''; // empty it (the word will be added outside the loop)
}
$line .= ' '.$words[0]; // add the word to the current sentence
$words = array_slice($words, 1); // remove the word from the array
}
if ($line != '') { $lines[] = $line; } // add the last line to the others, if it isn't empty
$lineHeight = $dimensions[1] - $dimensions[7]; // the height of a single line
$height = count($lines) * $lineHeight; // the height of all the lines total
// do the actual printing
$i = 0;
foreach ($lines as $line) {
imagettftext($image, $textSize, 0, $left, $top + $lineHeight * $i, $color, $font, $line);
$i++;
}
return $height;
}
?>
[#52] ryan at retronetworks dot com [2005-03-28 19:46:40]
Here is a function that lets you write a string with your own "font tracking" level (the amount of pixels separating each character). It uses imagettfbbox to determine the width of each character, so it doesn't discriminate against the skinnier of characters. For this example, let $t = the amount of distance in pixels you want to separate each character from its neighbors.
<?php
function ImageTTFTextWithTracking($im, $size, $angle, $t, $x, $y, $color, $font, $text) {
$numchar = strlen($text);
for($i = 0; $i < $numchar; $i++) {
# Assign character
$char[$i] = substr($text, $i, 1);
# Write character
imagettftext($im, $size, $angle, ($x + $w + ($i * $t)), $y, $color, $font, $char[$i]);
# Get width of character
$width = imagettfbbox($size, $angle, $font, $char[$i]);
$w = $w + $width[2];
}
}
?>
Be aware that it currently does not work for angles other than the 0 default (I have no need for that).
[#53] soukhinov at mail dot ru [2005-03-15 16:00:31]
I have tryed all of fixes
The David Eder's fix is the only working fix.
The "jtopland at hive dot no"s fix is good enough, but it not working with angle = 180 degrees.
[#54] helloktk at naver dot com [2004-06-24 06:55:49]
Here is a function which moves the center of text's bounding
box to a given pivot point (px,py) and rotates text about
that point.
<?php
$width=500;
$height=400;
$fontpath = 'c:/windows/fonts/arial.ttf';
$text = 'Finally, I have a roated text box';
$fontsize = 20;
$angle = 30.0;
// create an image and fill the background with lightgray
$image = imagecreatetruecolor($width,$height);
imagefill($image, 0, 0, 0xDDDDDD);
// bounding box
$bbox = imagettfbbox($fontsize, 0, $fontpath, $text);
// baseline point for drawing non-rotated text.
$x0= $bbox[6];
$y0=-$bbox[7];
// fixes bounding box w.r.t. image coordinate.
$bbox[5]=-$bbox[5]+$bbox[1];
$bbox[7]=-$bbox[7]+$bbox[3];
$bbox[1]=0;
$bbox[3]=0;
// get the size of image.
$sx=imagesx($image);
$sy=imagesy($image);
// center of bounding box (xc,yc);
$xc=($bbox[0]+$bbox[2])/2.0;
$yc=($bbox[1]+$bbox[7])/2.0;
// rotation angle in radian
$rad=$angle*pi()/180.0;
$sa=sin($rad);
$ca=cos($rad);
$x1=$x0-$xc;
$y1=$y0-$yc;
//pivot point(here, we take the center of image)
$px=$sx/2.0;
$py=$sy/2.0;
// new baseline point for rotated text.
$x2= intval( $x1*$ca+$y1*$sa+$px+0.5);
$y2= intval(-$x1*$sa+$y1*$ca+$py+0.5);
imagettftext($image,$fontsize,$angle,$x2,$y2,0xFF,$fontpath,$text);
// draw rotated bounding box;
rotbbox($bbox,$angle,$px,$py);
for($i=0;$i<4;$i++){
$x0=$bbox[2*$i+0];
$y0=$bbox[2*$i+1];
$j=$i+1;
if($j==4) $j=0;
$x1=$bbox[2*$j+0];
$y1=$bbox[2*$j+1];
imageline($image,$x0,$y0,$x1,$y1,0xFF0000);
}
// Show the image
imagepng($image);
function rotbbox(&$bbox,$angle,$px,$py){
$xc=($bbox[0]+$bbox[2])/2.0;
$yc=($bbox[1]+$bbox[7])/2.0;
$rad=$angle*pi()/180.0;
$sa=sin($rad);
$ca=cos($rad);
for ($i=0;$i<4;$i++){
$x=$bbox[$i*2+0]-$xc;
$y=$bbox[$i*2+1]-$yc;
$bbox[$i*2+0]= intval( $ca*$x+$sa*$y+$px+0.5);
$bbox[$i*2+1]= intval(-$sa*$x+$ca*$y+$py+0.5);
}
}
?>
[#55] jrisken at mn dot rr dot com [2004-03-09 14:12:04]
I took Magicaltux's word wrap procedure and modified it in two ways. I changed the order of processing so that the string plotting function is called only once for each word instead of for every character. And I wrote the results to a string scalar instead of a string array, with embedded breaks <br> at line ends. It should run pretty fast. Mine breaks only on spaces, but hyphens could easily be added.
I'm new to PHP so I apologize for my idiosyncratic formatting conventions.
<?php
function myWordWrap($txt,$font,$size,$width)
{
$txt.=" "; // guaranteed to find end of line
$spaces=array();
$wids=array();
$i=0;
while(true)
{
$j=strpos(substr($txt,$i)," ");
if(!($j===false))
{
$spaces[]=$j+$i;
$bbox=imagettfbbox($size,0,$font,substr($txt,$i,$j+1));
$left=($bbox[0]>$bbox[6])?$bbox[6]:$bbox[0];
$right=($bbox[2]>$bbox[4])?$bbox[2]:$bbox[4];
$wids[]=$right-$left;
$i=$j+$i+1;
}
else break;
}
$lastspace=-1;
$cum=0;
$t2="";
for($i=0;$i<count($spaces);$i++)
{
if((($cum>0)&&($cum+$wids[$i])>$width)) // time for a line break
{
$t2.="<br>";
$cum=0;
$i--;
}
else
{
// we'll always get at least one word (even if too wide) thanks to
// ($cum>0) test above
$t2.=substr($txt,$lastspace+1,$spaces[$i]-$lastspace);
$cum+=$wids[$i];
$lastspace=$spaces[$i];
}
}
return $t2;
}
?>
[#56] LB [2004-02-11 07:55:23]
the oliver dot martin at onemail dot fixbbox function is just lacking a small thing:
the coordonates for top and left have to be the opposite, because the imagettftext x and y coordonates are calculated from the top left of the image and set the bottom left of the first character.
The correct function is:
function fixbbox($bbox)
{
$tmp_bbox["left"] = min($bbox[0],$bbox[2],$bbox[4],$bbox[6]);
$tmp_bbox["top"] = min($bbox[1],$bbox[3],$bbox[5],$bbox[7]);
$tmp_bbox["width"] = max($bbox[0],$bbox[2],$bbox[4],$bbox[6]) -
min($bbox[0],$bbox[2],$bbox[4],$bbox[6]) + 1;
$tmp_bbox["height"] = max($bbox[1],$bbox[3],$bbox[5],$bbox[7]) - min($bbox[1],$bbox[3],$bbox[5],$bbox[7]);
$tmp_bbox["left"] = 0 - $tmp_bbox["left"];
$tmp_bbox["top"] = 0 - $tmp_bbox["top"];
return $tmp_bbox;
}
And it works for any rotated text.
[#57] David Eder [2004-02-10 09:46:52]
As "oliver dot martin at onemail dot at" noted above, imagettfbbox() does not work correctly in php 4.3.4. To remedy this, I've written a short function that uses trig to calculate the bounding box from rotating a non-rotated piece of text.
Hopefully, this comment will be obsolete soon, but for now, ...
function imagettfbbox_t($size, $angle, $fontfile, $text)
{
// compute size with a zero angle
$coords = imagettfbbox($size, 0, $fontfile, $text);
// convert angle to radians
$a = $angle * M_PI / 180;
// compute some usefull values
$ca = cos($a);
$sa = sin($a);
$ret = array();
// perform transformations
for($i = 0; $i < 7; $i += 2)
{
$ret[$i] = round($coords[$i] * $ca + $coords[$i+1] * $sa);
$ret[$i+1] = round($coords[$i+1] * $ca - $coords[$i] * $sa);
}
return $ret;
}
[#58] jtopland at hive dot no [2004-02-08 14:26:16]
Finally managed to make a fixed version of imagettfbbox().
All angles returns correct values.
Except that imagettftext() returns different trackings (space between each character) when rotating.
<?php
// Set some test variables
$font = "d://www//tahoma.ttf";
$text = "Finally, I can center rotated text!";
$size = 20;
$angle = 20;
// Create an image and fill the background with lightgray
$image = imagecreatetruecolor(500, 400);
imagefill($image, 0, 0, hexdec("dddddd"));
// Make a cross to make it easier to analyze
imageline($image, 0, 0, imagesx($image), imagesy($image), hexdec("000000"));
imageline($image, imagesx($image), 0, 0, imagesy($image), hexdec("000000"));
// Run a fixed version of imagettfbbox()
$bbox = imagettfbbox_fixed($size, $angle, $font, $text);
// Make some text and center the text on the image.
// imagettftext() pivot is on lower left
imagettftext($image, $size, $angle, imagesx($image) / 2 - $bbox['width'] / 2, imagesy($image) / 2 + $bbox['height'] / 2, hexdec("0000ff"), $font, $text);
// Show the image
imagepng($image);
function imagettfbbox_fixed($size, $angle, $font, $text)
{
// Get the boundingbox from imagettfbbox(), which is correct when angle is 0
$bbox = imagettfbbox($size, 0, $font, $text);
// Rotate the boundingbox
$angle = pi() * 2 - $angle * pi() * 2 / 360;
for ($i=0; $i<4; $i++)
{
$x = $bbox[$i * 2];
$y = $bbox[$i * 2 + 1];
$bbox[$i * 2] = cos($angle) * $x - sin($angle) * $y;
$bbox[$i * 2 + 1] = sin($angle) * $x + cos($angle) * $y;
}
// Variables which tells the correct width and height
$bbox['width'] = $bbox[0] + $bbox[4];
$bbox['height'] = $bbox[1] - $bbox[5];
return $bbox;
}
?>
[#59] oliver dot martin at onemail dot at [2004-01-09 13:13:18]
The original fixbox function by
<?php at deathz0rz dot homeunix dot net> doesn't work when the text is rotated, as it assumes that the upper left corner of the text is also the upper left corner of the bounding box. Same goes for the lower right corner. Here is my corrected version of it:
<?
function fixbbox($bbox)
{
$tmp_bbox["left"] = min($bbox[0],$bbox[2],$bbox[4],$bbox[6]);
$tmp_bbox["top"] = min($bbox[1],$bbox[3],$bbox[5],$bbox[7]);
$tmp_bbox["width"] = max($bbox[0],$bbox[2],$bbox[4],$bbox[6]) - min($bbox[0],$bbox[2],$bbox[4],$bbox[6]);
$tmp_bbox["height"] = max($bbox[1],$bbox[3],$bbox[5],$bbox[7]) - min($bbox[1],$bbox[3],$bbox[5],$bbox[7]);
return $tmp_bbox;
}
?>
However, be aware that this might not be very useful, as gd-2.0.8 introduces a bug which renders the results of imagettfbbox() useless when the text is rotated. This is still not fixed in the the php-4.3.4 bundled version (2.0.15 compatible).
[#60] MagicalTux at FF.ST [2003-12-22 12:09:24]
One use of this function is to do some WordWrap =p
I wrote a little function to make a basic wordwrap : it returns an array with each line in a row.
You just have to display each row on a different line (calling many times imagettftext) to get a good result.
The character ^ is assumed as a linebreak.
<?php
function im_wordwrap($txt,$font,$size,$width) {
$sep=array(' ','-'); // separators
$res=array();
$buf='';
// main function loop
for($i=0;$i<strlen($txt);$i++) {
$l=$txt{$i};
if ($l=='^') {
$res[]=$buf;
$buf='';
continue;
}
$t=$buf.$l;
$bbox=imagettfbbox($size,0,$font,$t);
$left=($bbox[0]>$bbox[6])?$bbox[6]:$bbox[0]; // determine most far points
$right=($bbox[2]>$bbox[4])?$bbox[2]:$bbox[4]; // idem
$w=$right-$left; // get total width
if ($w>$width) {
if ($buf=='') return false; // FATAL: 1 letter is smallest than the pixel width - avoid infinite loop
// we can assume that everything present in $buf currently is inside our limits
// find a separator in string
$fp=false;
foreach($sep as $s) {
$p=strrpos($buf,$s);
if (($p!==false) and ($p>$fp)) $fp=$p;
}
if ($fp===false) {
// let's break here !
$res[]=$buf;
$buf='';
$i--; // dececrase $i to retry this letter
continue;
}
// $fp+1 -> we put the separator char at the end of the prev. line =p
$res[]=substr($buf,0,$fp+1);
$buf=substr($buf,$fp+1);
$i--;
continue;
}
$buf.=$l;
}
if ($buf!='') $res[]=$buf;
return $res;
}
?>
[#61] php at deathz0rz dot homeunix dot net [2003-12-14 06:38:37]
The array this function returns is very strange, at least, i think so... So i created this function that 'fixes' the bounding box array into some human-understandable format
<?php
function fixbbox($bbox)
{
$xcorr=0-$bbox[6]; //northwest X
$ycorr=0-$bbox[7]; //northwest Y
$tmp_bbox['left']=$bbox[6]+$xcorr;
$tmp_bbox['top']=$bbox[7]+$ycorr;
$tmp_bbox['width']=$bbox[2]+$xcorr;
$tmp_bbox['height']=$bbox[3]+$ycorr;
return $tmp_bbox;
}
?>
[#62] Brian at NOSPAM at PrintsMadeEasy dot com [2002-09-04 13:12:35]
There seems to be a little confusion regarding the font coordinate system. PHP's TTF functions will make more sense after you understand the principals of font creation. This guy wrote a really good overview...
http://pfaedit.sourceforge.net/overview.html