©
이 문서에서는 PHP 중국어 웹사이트 매뉴얼 풀어 주다
(PECL ps >= 1.1.0)
ps_setcolor — Sets current color
$psdoc
, string $type
, string $colorspace
, float $c1
, float $c2
, float $c3
, float $c4
)Sets the color for drawing, filling, or both.
psdoc
Resource identifier of the postscript file as returned by ps_new() .
type
The parameter type
can be
both, fill, or
fillstroke.
colorspace
The colorspace should be one of gray, rgb, cmyk, spot, pattern. Depending on the colorspace either only the first, the first three or all parameters will be used.
c1
Depending on the colorspace this is either the red component (rgb), the cyan component (cmyk), the gray value (gray), the identifier of the spot color or the identifier of the pattern.
c2
Depending on the colorspace this is either the green component (rgb), the magenta component (cmyk).
c3
Depending on the colorspace this is either the blue component (rgb), the yellow component (cmyk).
c4
This must only be set in cmyk colorspace and specifies the black component.
The second parameter is currently not always evaluated. The color is sometimes set for filling and drawing just as if fillstroke were passed.
成功时返回 TRUE
, 或者在失败时返回 FALSE
。
[#1] php at catchall dot toao dot net [2009-06-14 08:29:29]
Note that if you specify colors in RGB, the parameters C1, C2, and C3 should be specified in decimal form. To calculate this, divide the value by 255. Example: rgb(58,110,165) becomes
<?php ps_setcolor($ps, "stroke", "rgb", .23, .43, .65, 0.0); ?>
However, since this is PostScript, most if not all files will be destined for printing and colors should be specified in CMYK anyway.