©
이 문서에서는 PHP 중국어 웹사이트 매뉴얼 풀어 주다
(PHP 4 >= 4.3.0, PHP 5)
msg_receive — Receive a message from a message queue
$queue
, int $desiredmsgtype
, int &$msgtype
, int $maxsize
, mixed &$message
[, bool $unserialize
= true
[, int $flags
= 0
[, int &$errorcode
]]] ) msg_receive() will receive the first message from the
specified queue
of the type specified by
desiredmsgtype
.
queue
desiredmsgtype
If desiredmsgtype
is 0, the message from the front
of the queue is returned. If desiredmsgtype
is
greater than 0, then the first message of that type is returned.
If desiredmsgtype
is less than 0, the first
message on the queue with the lowest type less than or equal to the
absolute value of desiredmsgtype
will be read.
If no messages match the criteria, your script will wait until a suitable
message arrives on the queue. You can prevent the script from blocking
by specifying MSG_IPC_NOWAIT
in the
flags
parameter.
msgtype
The type of the message that was received will be stored in this parameter.
maxsize
The maximum size of message to be accepted is specified by the
maxsize
; if the message in the queue is larger
than this size the function will fail (unless you set
flags
as described below).
message
The received message will be stored in message
,
unless there were errors receiving the message.
unserialize
If set to
TRUE
, the message is treated as though it was serialized using the
same mechanism as the session module. The message will be unserialized
and then returned to your script. This allows you to easily receive
arrays or complex object structures from other PHP scripts, or if you
are using the WDDX serializer, from any WDDX compatible source.
If unserialize
is FALSE
, the message will be
returned as a binary-safe string.
flags
The optional flags
allows you to pass flags to the
low-level msgrcv system call. It defaults to 0, but you may specify one
or more of the following values (by adding or ORing them together).
MSG_IPC_NOWAIT | If there are no messages of the
desiredmsgtype , return immediately and do not
wait. The function will fail and return an integer value
corresponding to MSG_ENOMSG .
|
MSG_EXCEPT | Using this flag in combination with a
desiredmsgtype greater than 0 will cause the
function to receive the first message that is not equal to
desiredmsgtype . |
MSG_NOERROR |
If the message is longer than maxsize ,
setting this flag will truncate the message to
maxsize and will not signal an error.
|
errorcode
If the function fails, the optional errorcode
will be set to the value of the system errno variable.
成功时返回 TRUE
, 或者在失败时返回 FALSE
。
Upon successful completion the message queue data structure is updated as follows: msg_lrpid is set to the process-ID of the calling process, msg_qnum is decremented by 1 and msg_rtime is set to the current time.
[#1] marbledore at mail dot ru [2011-06-16 03:38:40]
It looks like msg_receive() allocates a memory with size $maxsize, and only then tries to receive a message from queue into allocated memory. Because my script dies with $maxsize = 1 Gib, but works with $maxsize = 10 Kib.
[#2] shepik at yandex dot ru [2009-07-02 07:09:36]
The behaviour of msg_recieve function depends on value of $desiredmsgtype:
If zero: the first message with any $msgtype will be recieved.
Positive: the first message with $msgtype = desiredmsgtype
Negative: the first message with $msgtype <= abs ($desiredmsgtype)
(where "$msgtype" means msgtype the message was sent with)
[#3] eimers at mehrkanal dot com [2008-03-19 08:49:45]
<?php error_reporting(E_ALL);
header('Content-Type: text/plain; charset=ISO-8859-1');
echo "Start...\n";
// Create System V Message Queue. Integer value is the number of the Queue
$queue = msg_get_queue(100379);
// Sendoptions
$message='nachricht'; // Transfering Data
$serialize_needed=false; // Must the transfer data be serialized ?
$block_send=false; // Block if Message could not be send (Queue full...) (true/false)
$msgtype_send=1; // Any Integer above 0. It signeds every Message. So you could handle multible message
// type in one Queue.
// Receiveoptions
$msgtype_receive=1; // Whiche type of Message we want to receive ? (Here, the type is the same as the type we send,
// but if you set this to 0 you receive the next Message in the Queue with any type.
$maxsize=100; // How long is the maximal data you like to receive.
$option_receive=MSG_IPC_NOWAIT; // If there are no messages of the wanted type in the Queue continue without wating.
// If is set to NULL wait for a Message.
// Send or receive 20 Messages
for ($i=0;$i<20;$i++) {
sleep(1);
// This one sends
if ($_GET['typ']=='send') {
if(msg_send($queue,$msgtype_send, $message,$serialize_needed, $block_send,$err)===true) {
echo "Message sendet.\n";
} else {
var_dump($err);
}
// This one received
} else {
$queue_status=msg_stat_queue($queue);
echo 'Messages in the queue: '.$queue_status['msg_qnum']."\n";
// WARNUNG: nur weil vor einer Zeile Code noch Nachrichten in der Queue waren, muss das jetzt nciht mehr der Fall sein!
if ($queue_status['msg_qnum']>0) {
if (msg_receive($queue,$msgtype_receive ,$msgtype_erhalten,$maxsize,$daten,$serialize_needed, $option_receive, $err)===true) {
echo "Received data".$daten."\n";
} else {
var_dump($err);
}
}
}
}
?>
[#4] marvel at post dot cz [2008-01-26 02:27:20]
Consider this e.g. Linux situation:
<?php
//file send.php
$ip = msg_get_queue(12340);
msg_send($ip,8,"abcd",false,false,$err);
//-----------------------------------------------------
<?php
//file receive.php
$ip = msg_get_queue(12340);
msg_receive($ip,0,$msgtype,4,$data,false,null,$err);
echo "msgtype {$msgtype} data {$data}\n";
msg_receive($ip,0,$msgtype,4,$data,false,null,$err);
echo "msgtype {$msgtype} data {$data}\n";
?>
Now run:
in terminal #1 php5 receive.php
in terminal #2 php5 receive.php
in terminal #3 php5 send.php
Showing messages from queue will flip-flop. It means you run once send.php, the message will be shown in terminal #1. Second run it will be in t#2, third #1 and so on.
[#5] webmaster at toolshed51 dot com [2003-04-10 03:56:17]
This is meant to be run as your apache user in a terminal, call script in note of msg_send and they will communicate.
#! /usr/bin/env php
<?php
$MSGKEY = 519051; // Message
$msg_id = msg_get_queue ($MSGKEY, 0600);
while (1) {
if (msg_receive ($msg_id, 1, $msg_type, 16384, $msg, true, 0, $msg_error)) {
if ($msg == 'Quit') break;
echo "$msg\n";
} else {
echo "Received $msg_error fetching message\n";
break;
}
}
msg_remove_queue ($msg_id);
?>