©
This document uses PHP Chinese website manual Release
(PHP 4, PHP 5)
ip2long — 将一个IPV4的字符串互联网协议转换成数字格式
$ip_address
)方法 ip2long() 产生一个IPV4的互联网地址从互联网标准的格式(点字符串)表示。
ip2long() 还可以与非完整IP进行工作。 阅读 » http://publibn.boulder.ibm.com/doc_link/en_US/a_doc_lib/libs/commtrf2/inet_addr.htm 获得更多信息。
ip_address
一个标准格式的地址。
返回IP地址转换后的数字 或 FALSE
如果 ip_address
是无效的。
版本 | 说明 |
---|---|
5.2.10 | 再此之前的版本, ip2long() 有时会返回即使这不是一个IPV4的标准地址的数字地址。 |
Example #1 ip2long() 例子
<?php
$ip = gethostbyname ( 'www.example.com' );
$out = "The following URLs are equivalent:<br />\n" ;
$out .= 'http://www.example.com/, http://' . $ip . '/, and http://' . sprintf ( "%u" , ip2long ( $ip )) . "/<br />\n" ;
echo $out ;
?>
Example #2 显示IP地址
第二个例子说明打印一个转换后的地址使用 printf() 在PHP4和PHP5的功能:
<?php
$ip = gethostbyname ( 'www.example.com' );
$long = ip2long ( $ip );
if ( $long == - 1 || $long === FALSE ) {
echo 'Invalid IP, please try again' ;
} else {
echo $ip . "\n" ; // 192.0.34.166
echo $long . "\n" ; // -1073732954
printf ( "%u\n" , ip2long ( $ip )); // 3221234342
}
?>
Note:
因为PHP的 integer 类型是有符号,并且有许多的IP地址讲导致在32位系统的情况下为复数, 你需要使用 "%u" 进行转换通过 sprintf() 或 printf() 得到的字符串来表示无符号的IP地址。
Note:
ip2long() 将返回
FALSE
在IP是 255.255.255.255 的情况,版本为 PHP 5 <= 5.0.2. 在修复后 PHP 5.0.3 会返回 -1 (与PHP4相同).
[#1] Karl Rixon [2014-09-18 14:01:15]
The manual states that "ip2long() will also work with non-complete IP addresses", however this is system-dependant so cannot be relied upon. For example, on my system ip2long() will return FALSE for incomplete addresses:
<?php
var_dump(ip2long("255.255")); // bool(false)
?>
This is because ip2long will use inet_pton if available, which does not support non-complete addresses. If inet_pton is not available on your system, inet_addr will be used and incomplete addresses will work as stated.
[#2] oo dot para at gmail dot com [2014-01-08 10:30:58]
If you want to validate IPs using this function, please be careful:
The function filter_var should be used instead for validating IPs.
<?php
$ip = '192.168.0355.24';
var_dump(ip2long($ip) !== false); // true (expected false)
var_dump(filter_var($ip, FILTER_VALIDATE_IP) !== false); // false
$ip = '192.168.355.24';
var_dump(ip2long($ip) !== false); // false
var_dump(filter_var($ip, FILTER_VALIDATE_IP) !== false); // false
?>
[#3] rasmus at mindplay dot dk [2013-08-27 14:54:58]
As pointed out by others, this function's return value is not consistent on 32 and 64-bit platforms.
Your best bet for consistent behavior across 32/64-bit platforms (and Windows) is the lowest common denominator: force the return value of ip2long() into a signed 32-bit integer, e.g.:
var_dump(unpack('l', pack('l', ip2long('255.255.255.0'))));
This looks idiotic, but it gives you a consistent signed integer value on all platforms.
(the arguments to both pack() and unpack() are the lower-case letter "L", not the number "1", in case it looks that way on your screen...)
[#4] admin at wudimei dot com [2012-07-04 02:42:50]
<?php
function getIpRang( $cidr) {
list($ip, $mask) = explode('/', $cidr);
$maskBinStr =str_repeat("1", $mask ) . str_repeat("0", 32-$mask ); //net mask binary string
$inverseMaskBinStr = str_repeat("0", $mask ) . str_repeat("1", 32-$mask ); //inverse mask
$ipLong = ip2long( $ip );
$ipMaskLong = bindec( $maskBinStr );
$inverseIpMaskLong = bindec( $inverseMaskBinStr );
$netWork = $ipLong & $ipMaskLong;
$start = $netWork+1;//???????? ,ignore network ID(eg: 192.168.1.0)
$end = ($netWork | $inverseIpMaskLong) -1 ; //???????? ignore brocast IP(eg: 192.168.1.255)
return array( $start, $end );
}
?>
[#5] replay111 at tlen dot pl [2012-05-26 13:28:41]
Hi,
based on examples above I have mixed class IPFilter with netMatch function wich gives me complete class for IP4 check including CIDR IP format:
<?php
class IP4Filter {
private static $_IP_TYPE_SINGLE = 'single';
private static $_IP_TYPE_WILDCARD = 'wildcard';
private static $_IP_TYPE_MASK = 'mask';
private static $_IP_TYPE_CIDR = 'CIDR';
private static $_IP_TYPE_SECTION = 'section';
private $_allowed_ips = array();
public function __construct($allowed_ips) {
$this->_allowed_ips = $allowed_ips;
}
public function check($ip, $allowed_ips = null) {
$allowed_ips = $allowed_ips ? $allowed_ips : $this->_allowed_ips;
foreach ($allowed_ips as $allowed_ip) {
$type = $this->_judge_ip_type($allowed_ip);
$sub_rst = call_user_func(array($this, '_sub_checker_' . $type), $allowed_ip, $ip);
if ($sub_rst) {
return true;
}
}
return false;
}
private function _judge_ip_type($ip) {
if (strpos($ip, '*')) {
return self :: $_IP_TYPE_WILDCARD;
}
if (strpos($ip, '/')) {
$tmp = explode('/', $ip);
if (strpos($tmp[1], '.')) {
return self :: $_IP_TYPE_MASK;
} else {
return self :: $_IP_TYPE_CIDR;
}
}
if (strpos($ip, '-')) {
return self :: $_IP_TYPE_SECTION;
}
if (ip2long($ip)) {
return self :: $_IP_TYPE_SINGLE;
}
return false;
}
private function _sub_checker_single($allowed_ip, $ip) {
return (ip2long($allowed_ip) == ip2long($ip));
}
private function _sub_checker_wildcard($allowed_ip, $ip) {
$allowed_ip_arr = explode('.', $allowed_ip);
$ip_arr = explode('.', $ip);
for ($i = 0; $i < count($allowed_ip_arr); $i++) {
if ($allowed_ip_arr[$i] == '*') {
return true;
} else {
if (false == ($allowed_ip_arr[$i] == $ip_arr[$i])) {
return false;
}
}
}
}
private function _sub_checker_mask($allowed_ip, $ip) {
list($allowed_ip_ip, $allowed_ip_mask) = explode('/', $allowed_ip);
$begin = (ip2long($allowed_ip_ip) & ip2long($allowed_ip_mask)) + 1;
$end = (ip2long($allowed_ip_ip) | (~ ip2long($allowed_ip_mask))) + 1;
$ip = ip2long($ip);
return ($ip >= $begin && $ip <= $end);
}
private function _sub_checker_section($allowed_ip, $ip) {
list($begin, $end) = explode('-', $allowed_ip);
$begin = ip2long($begin);
$end = ip2long($end);
$ip = ip2long($ip);
return ($ip >= $begin && $ip <= $end);
}
private function _sub_checker_CIDR($CIDR, $IP) {
list ($net, $mask) = explode('/', $CIDR);
return ( ip2long($IP) & ~((1 << (32 - $mask)) - 1) ) == ip2long($net);
}
}
?>
For me this code works great, so I wanna thank to all You guys!!!
[#6] Aleksey Kuznetsov [2012-05-07 17:30:43]
Unfortunately sprintf('%u', ...) is low and returns string representation of integer value instead of integer.
Here is a function I use to convert IP to mySQL-compatible signed integer:
function ip2int($ip) {
if (!$r = ip2long($ip)) return 0; // we want 0 instead of false, even in case of bad IP
if ($r > 2147483647)
$r-= 4294967296;
return $r; // ok
}
[#7] pink at pink dot art dot pl [2012-04-26 13:09:41]
Be aware when you're running 64bit system, ip2long will result 64 bit integer which doesn't fit in MySQL INT, you can use BIGINT or INT UNSIGNED because on 64bit systems ip2long will never return negative integer. See also https://bugs.php.net/bug.php?id=54338
[#8] PandoraBox2007 at gmail dot com [2011-12-03 19:06:40]
Universal ip4/ip6
<?php
// encoded --
function encode_ip ($ip)
{
$d = explode('.', $ip);
if (count($d) == 4) return sprintf('%02x%02x%02x%02x', $d[0], $d[1], $d[2], $d[3]);
$d = explode(':', preg_replace('/(^:)|(:$)/', '', $ip));
$res = '';
foreach ($d as $x)
$res .= sprintf('%0'. ($x == '' ? (9 - count($d)) * 4 : 4) .'s', $x);
return $res;
}
// decoded
function decode_ip($int_ip)
{
function hexhex($value) { return dechex(hexdec($value)); };
if (strlen($int_ip) == 32) {
$int_ip = substr(chunk_split($int_ip, 4, ':'), 0, 39);
$int_ip = ':'. implode(':', array_map("hexhex", explode(':',$int_ip))) .':';
preg_match_all("/(:0)+/", $int_ip, $zeros);
if (count($zeros[0]) > 0) {
$match = '';
foreach($zeros[0] as $zero)
if (strlen($zero) > strlen($match))
$match = $zero;
$int_ip = preg_replace('/'. $match .'/', ':', $int_ip, 1);
}
return preg_replace('/(^:([^:]))|(([^:]):$)/', '$2$4', $int_ip);
}
$hexipbang = explode('.', chunk_split($int_ip, 2, '.'));
return hexdec($hexipbang[0]). '.' . hexdec($hexipbang[1]) . '.' . hexdec($hexipbang[2]) . '.' . hexdec($hexipbang[3]);
}
?>
DB:
`user_ip` varchar(32) DEFAULT NULL
[#9] anjo2 [2011-05-28 09:13:42]
In 32bits systems, you cannot convert ipv6 to long, but you can convert ip2bin and bin2ip
This function converts ipv4 and ipv6, returns false if ip is not valid
<?php
function ip2bin($ip)
{
if(filter_var($ip, FILTER_VALIDATE_IP, FILTER_FLAG_IPV4) !== false)
return base_convert(ip2long($ip),10,2);
if(filter_var($ip, FILTER_VALIDATE_IP, FILTER_FLAG_IPV6) === false)
return false;
if(($ip_n = inet_pton($ip)) === false) return false;
$bits = 15; // 16 x 8 bit = 128bit (ipv6)
while ($bits >= 0)
{
$bin = sprintf("%08b",(ord($ip_n[$bits])));
$ipbin = $bin.$ipbin;
$bits--;
}
return $ipbin;
}
function bin2ip($bin)
{
if(strlen($bin) <= 32) // 32bits (ipv4)
return long2ip(base_convert($bin,2,10));
if(strlen($bin) != 128)
return false;
$pad = 128 - strlen($bin);
for ($i = 1; $i <= $pad; $i++)
{
$bin = "0".$bin;
}
$bits = 0;
while ($bits <= 7)
{
$bin_part = substr($bin,($bits*16),16);
$ipv6 .= dechex(bindec($bin_part)).":";
$bits++;
}
return inet_ntop(inet_pton(substr($ipv6,0,-1)));
}
?>
[#10] hanguofeng at gmail dot com [2011-03-13 07:50:01]
I've write an IPFilter class to check if a ip is in given ips.
<?php
class IPFilter
{
private static $_IP_TYPE_SINGLE = 'single';
private static $_IP_TYPE_WILDCARD = 'wildcard';
private static $_IP_TYPE_MASK = 'mask';
private static $_IP_TYPE_SECTION = 'section';
private $_allowed_ips = array();
public function __construct($allowed_ips)
{
$this -> _allowed_ips = $allowed_ips;
}
public function check($ip, $allowed_ips = null)
{
$allowed_ips = $allowed_ips ? $allowed_ips : $this->_allowed_ips;
foreach($allowed_ips as $allowed_ip)
{
$type = $this -> _judge_ip_type($allowed_ip);
$sub_rst = call_user_func(array($this,'_sub_checker_' . $type), $allowed_ip, $ip);
if ($sub_rst)
{
return true;
}
}
return false;
}
private function _judge_ip_type($ip)
{
if (strpos($ip, '*'))
{
return self :: $_IP_TYPE_WILDCARD;
}
if (strpos($ip, '/'))
{
return self :: $_IP_TYPE_MASK;
}
if (strpos($ip, '-'))
{
return self :: $_IP_TYPE_SECTION;
}
if (ip2long($ip))
{
return self :: $_IP_TYPE_SINGLE;
}
return false;
}
private function _sub_checker_single($allowed_ip, $ip)
{
return (ip2long($allowed_ip) == ip2long($ip));
}
private function _sub_checker_wildcard($allowed_ip, $ip)
{
$allowed_ip_arr = explode('.', $allowed_ip);
$ip_arr = explode('.', $ip);
for($i = 0;$i < count($allowed_ip_arr);$i++)
{
if ($allowed_ip_arr[$i] == '*')
{
return true;
}
else
{
if (false == ($allowed_ip_arr[$i] == $ip_arr[$i]))
{
return false;
}
}
}
}
private function _sub_checker_mask($allowed_ip, $ip)
{
list($allowed_ip_ip, $allowed_ip_mask) = explode('/', $allowed_ip);
$begin = (ip2long($allowed_ip_ip) &ip2long($allowed_ip_mask)) + 1;
$end = (ip2long($allowed_ip_ip) | (~ip2long($allowed_ip_mask))) + 1;
$ip = ip2long($ip);
return ($ip >= $begin && $ip <= $end);
}
private function _sub_checker_section($allowed_ip, $ip)
{
list($begin, $end) = explode('-', $allowed_ip);
$begin = ip2long($begin);
$end = ip2long($end);
$ip = ip2long($ip);
return ($ip >= $begin && $ip <= $end);
}
}
?>
useage:
<?php
$filter = new IPFilter(
array(
'127.0.0.1',
'172.0.0.*',
'173.0.*.*',
'126.1.0.0/255.255.0.0',
'125.0.0.1-125.0.0.9',
));
$filter -> check('126.1.0.2');
?>
[#11] me at iaincollins dot com [2010-05-19 03:37:38]
I would just like to try and clear up simply that if storing IPV4 addresses in an SQL database you should use an unsigned int (4 bytes).
The easiest way to do this in PHP is to use sprintf():
<?php
$dottedFormatAddress = '127.0.0.1';
$ipv4address = sprintf("%u", ip2long($dottedFormatAddress));
?>
Primary reasons are it's compatible with database functions like MySQL's INET_ATON & INET_NTOA (which also use unsigned int's), it's efficient, and it's the most common format used by IP lookup databases.
[#12] Mam(O)n [2010-01-23 03:37:03]
Another CIDR function, but with sanity check:
<?php
function mask2prefix($mask)
{
if (($long = ip2long($mask)) === false)
return false;
for ($prefix = 0; $long & 0x80000000; ++$prefix, $long <<= 1) {}
if ($long != 0)
return false;
return $prefix;
}
?>
[#13] joe at joeceresini dot com [2009-11-24 17:45:31]
A quick method to convert a netmask (ex: 255.255.255.240) to a cidr mask (ex: /28):
<?php
function mask2cidr($mask){
$long = ip2long($mask);
$base = ip2long('255.255.255.255');
return 32-log(($long ^ $base)+1,2);
}
?>
[#14] f dot wiessner at smart-weblications dot net [2009-11-07 06:12:01]
Here some working ip2long6 and long2ip6 functions - keep in mind that this needs php gmp-lib:
<?php
$ipv6 = "2001:4860:a005::68";
function ip2long6($ipv6) {
$ip_n = inet_pton($ipv6);
$bits = 15; // 16 x 8 bit = 128bit
while ($bits >= 0) {
$bin = sprintf("%08b",(ord($ip_n[$bits])));
$ipv6long = $bin.$ipv6long;
$bits--;
}
return gmp_strval(gmp_init($ipv6long,2),10);
}
function long2ip6($ipv6long) {
$bin = gmp_strval(gmp_init($ipv6long,10),2);
if (strlen($bin) < 128) {
$pad = 128 - strlen($bin);
for ($i = 1; $i <= $pad; $i++) {
$bin = "0".$bin;
}
}
$bits = 0;
while ($bits <= 7) {
$bin_part = substr($bin,($bits*16),16);
$ipv6 .= dechex(bindec($bin_part)).":";
$bits++;
}
// compress
return inet_ntop(inet_pton(substr($ipv6,0,-1)));
}
print $ipv6long = ip2long6($ipv6)."\n";
print $ipv6 = long2ip6($ipv6long)."\n";
?>
outputs:
42541956150894553250710573749450571880
2001:4860:a005::68
[#15] david dot schueler at tel-billig dot de [2009-10-27 06:41:16]
To get the network adress out of the broadcast adress and netmask just to an AND on it:
<?php
// simple example
$bcast = ip2long("192.168.178.255");
$smask = ip2long("255.255.255.0");
$nmask = $bcast & $smask;
echo long2ip($nmask); // Will give 192.168.178.0
?>
With this example you are able to check if a given host is in your own local net or not (on linux):
<?php
function clientInSameSubnet($client_ip=false,$server_ip=false) {
if (!$client_ip)
$client_ip = $_SERVER['REMOTE_ADDR'];
if (!$server_ip)
$server_ip = $_SERVER['SERVER_ADDR'];
// Extract broadcast and netmask from ifconfig
if (!($p = popen("ifconfig","r"))) return false;
$out = "";
while(!feof($p))
$out .= fread($p,1024);
fclose($p);
// This is because the php.net comment function does not
// allow long lines.
$match = "/^.*".$server_ip;
$match .= ".*Bcast:(\d{1,3}\.\d{1,3}i\.\d{1,3}\.\d{1,3}).*";
$match .= "Mask:(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})$/im";
if (!preg_match($match,$out,$regs))
return false;
$bcast = ip2long($regs[1]);
$smask = ip2long($regs[2]);
$ipadr = ip2long($client_ip);
$nmask = $bcast & $smask;
return (($ipadr & $smask) == ($nmask & $smask));
}
?>
[#16] joshua_r108 at hotmail dot com [2009-08-01 23:30:06]
I wrote something on the different ways to get an IP and convert it using ip2long(), the different ways to store an IP or an IP range in MySQL, and the different ways to query for the IP(s). Maybe something useful for others?
http://strictcoder.blogspot.com/2009_08_01_archive.html
Title: Query For An IP In A Database
Regards,
Joshua K Roberson
[#17] jwadhams1 at yahoo dot com [2009-07-28 15:41:46]
I wanted to build on what kaputt and spinyn contributed in a way that I think is a little more intuitive (e.g., let sprintf do all the binary conversion and padding, and let substr_compare do the trimming and comparing):
<?php
function ip_in_network($ip, $net_addr, $net_mask){
if($net_mask <= 0){ return false; }
$ip_binary_string = sprintf("%032b",ip2long($ip));
$net_binary_string = sprintf("%032b",ip2long($net_addr));
return (substr_compare($ip_binary_string,$net_binary_string,0,$net_mask) === 0);
}
ip_in_network("192.168.2.1","192.168.2.0",24); //true
ip_in_network("192.168.6.93","192.168.0.0",16); //true
ip_in_network("1.6.6.6","128.168.2.0",1); //false
?>
[#18] spinyn at gmail dot com [2009-04-16 19:51:00]
Just want to add a comment to kaputt's valuable contribution to the task of matching hosts to ip ranges, efficiently. The script works fine if the binary representation of the ip involves no leading zeros. Unfortunately, the way decbin() seems to work, leading zeros in the binary representation of the first ip quad get dropped. That is a serious matter if you're trying to match all possible candidates in the checklist. In those cases the leading zeros need to be added back to get accurate matches for values in the first quad between 0-127 (or the binary equivalent, 0-01111111).
The solution I came up with to address this issue was the following function:
<?php
function addLeadingZero($ip) {
if (($result = (32 - strlen($ip))) > 0)
return str_repeat("0", $result).$ip;
}
?>
[#19] Anonymous [2009-02-18 11:43:21]
To always get the signed 32bit representation of an ip, I found this workaround:
<?php
list(, $ip) = unpack('l',pack('l',ip2long('200.200.200.200')));
?>
In this example, $ip will be -926365496 regardless of a 32 or 64 bit system.
[#20] randolf [2009-01-20 13:19:22]
Convert IP to unsigned long
<?php
//$strIP : IP in String-format
//$lngIP : IP in unsigned long
if (($lngIP=ip2long($strIP)) < 0){ $lngIP += 4294967296 ;}
// ADD 2^32
thats all.
?>
[#21] kaputt at starnet dot md [2008-11-03 23:47:40]
Hi all!
I've maded simple script that allow you filter traffic by networks, like if you want to deny 192.168.0.0/24
I used ncritten's myip2long function for this.
Sorry for such non-optimized code, but it works enough good =)
file iplist.txt:
192.168.0.0/24
172.16.0.0/16
10.0.0.0/8
<?php
########### ncritten's function myip2long
function myip2long($ip) {
if (is_numeric($ip)) {
return sprintf("%u", floatval($ip));
} else {
return sprintf("%u", floatval(ip2long($ip)));
}
}
########### function to chek ip if it in one of denyied/allowed networks =)
function ipfilter($ip) {
$match = 0;
### converting ip address in binary
$ip_addr = decbin(myip2long($ip));
### the file wich contains allowed/denyied networks
if (fopen("iplist.txt", "r")) {
$source = file("iplist.txt");
foreach ($source as $line) {
### exploding each network to obtaid network address and cidr
$network = explode("/", $line);
$net_addr = decbin(myip2long($network[0]));
$cidr = $network[1];
### and finaly cheking quantity of network bits from left to right wich is equal to cidr is equal to the same bits of ip address
if (substr($net_addr, 0, $cidr) == substr($ip_addr, 0, $cidr)) {
$match = 1;
break;
}
}
}
return $match;
}
### this function will return 1 if IP match to some network or 0 if will not match
### and finaly the chek will be like this
$user_ip = $_SERVER['REMOTE_ADDR'];
if (ipfilter($user_ip) == 1) echo "allowed!";
else echo "deny!";
?>
Good Luck!
P.S. Sorry for my bad english =)
[#22] Teguh Iskanto - Kamprettos at yahoo [2008-08-29 09:53:44]
to Anonymous @ 29-Aug-2008 10:19
If you're speaking about efficiency, there's no absolute right / wrong as it all depends on the user's needs, specs and requirements.
But from what I'm coming from , this method served me well, I've used this to match 2 network ends of approx 2700++ something unique VRFs (Nortel Shasta) and yes, each VRF is a virtualized firewall that consists of at least 20 different network objects (some could have couple of hundreds). Not to mention that these , still have to be compared with another hundreds of contivity boxes and each box have a range of around 1-600 vpn peers (to add more complexity, each peer has around 1-50 network ranges).
So, if you do the math, the number of permutations that need to be calculated, is indeed quite complex. I could get the whole result somewhere in around 50-65 secs tops.
Had I used a php function to crunch those data the result would have been longer.
[#23] Anonymous [2008-08-29 05:19:35]
@Teguh Iskanto
Hi,
Your solution requires you to store the IP addresses and masks as strings, and also to store the subnet mask being used by your hosts. This is very inefficient.
If you stored your network addresses as unsigned Integers, and your masks as TinyInts (i.e. a value between 0 & 32), you could instead do this:
select * from networks WHERE inet_aton('10.20.251.130') between `ipnumber` AND (`ipnumber` + (POW(2,(32-`mask`)))-1);
Obviously this can be made quicker on very high load systems by storing the broadcast address in the table instead of calculating it on the fly:
select * from networks WHERE inet_aton('10.20.251.130') between `ipnumber` AND `broadcast`;
Nick
[#24] ncritten at gmail dot youknowwhat [2008-08-29 04:58:38]
Hi,
Please find below a little function I wrote for handling IP addresses as unsigned integers.
This function will take an IP address or IP number in ANY FORMAT (that I can think of) and will return it's decimal unsigned equivalent, as a string.
<?php
function myip2long($ip){
if (is_numeric($ip)){
return sprintf("%u", floatval($ip));
} else {
return sprintf("%u", floatval(ip2long($ip)));
}
}
?>
Here is is in action:
<?php
$ip['DottedQuadDec'] = "192.168.255.109";
$ip['PosIntStr'] = "3232300909";
$ip['NegIntStr'] = "-1062666387";
$ip['PosInt'] = 3232300909;
$ip['NegInt'] = -1062666387;
$ip['DottedQuadHex'] = "0xc0.0xA8.0xFF.0x6D";
$ip['DottedQuadOct'] = "0300.0250.0377.0155";
$ip['HexIntStr'] = "0xC0A8FF6D";
$ip['HexInt'] = 0xC0A8FF6D;
printf("\n% 16s : % 20s => % 11s => % 16s","Input Type","Input Value","Converted","Converted Back");
echo "\n ------------------------------------------------------------------";
foreach ($ip as $type => $value){
$ipnum = myip2long($value);
printf("\n% 16s : % 20s => % 11s => % 16s",$type,$value,$ipnum,long2ip($ipnum));
}
?>
[#25] Teguh Iskanto - Kamprettos_at_yahoo [2008-08-27 07:40:04]
A quick way to find which IP address belong to which network , *without* even creating a single PHP function (pure SQL)
Scenario :
- I have one table that has a list of host ip addresses
- I have another table that list all the networks' addresses
- I need to find which host belongs to which network
nodes table
+-------------+-----------------+-------+
| ip | mask | name |
+-------------+-----------------+-------+
| 192.168.1.1 | 255.255.255.0 | node1 |
| 192.168.1.1 | 255.255.255.252 | node2 |
| 192.168.2.1 | 255.255.255.252 | node3 |
+-------------+-----------------+-------+
network1 table
+-------------+---------------+------+
| ipaddr | netmask | name |
+-------------+---------------+------+
| 192.168.1.0 | 255.255.255.0 | net1 |
| 192.168.2.0 | 255.255.255.0 | net2 |
| 192.168.3.0 | 255.255.255.0 | net3 |
| 192.168.4.0 | 255.255.255.0 | net4 |
+-------------+---------------+------+
Solution 1 - with PHP ( Long ... ) :
1. create a PHP function that will calculate and compare IP address with the network
2. extract data from the table nodes, calculate the IP with its mask using a PHP function to get the network address
3. do the same with table network1
4. compare result 2 and result 3 , once finished put them into an array to be presented as an HTML
5. done
Solution 2 - With SQL ( Very Very Fast & Short ) :
1. create sql with 'inet_aton' function + table joins
2. extract the data from sql outputs
3. done
how :
SQL :
select a.name as host_name,
a.ip as host_ip,
b.name as net_name
from nodes a, network1 b
where (inet_aton(a.ip) & inet_aton(a.mask) = inet_aton(b.ipaddr) & inet_aton(b.netmask));
Results :
Voilla ...
+-----------+-------------+----------+
| host_name | host_ip | net_name |
+-----------+-------------+----------+
| node1 | 192.168.1.1 | net1 |
| node2 | 192.168.1.1 | net1 |
| node3 | 192.168.2.1 | net2 |
+-----------+-------------+----------+
Hope this helps
[#26] herwin at snt dot utwente nl [2008-06-04 08:50:43]
The code examples explain why printing needs a casting, but beware that also calculations are performed with signed integers. In my case, the result of (ip2long('130.89.0.1') >> 24) was supposed to be 130, but the actual result was -126
[#27] chrisp-phpnet at inventivedingo dot com [2008-05-30 19:36:13]
I had a problem with calling this function with REMOTE_ADDR on my lighttpd web server. Turned out that IPv6 was installed on this server, so even though REMOTE_ADDR was an IPv4 address, it was being formatted using IPv6's IPv4 compatibility mode. For example, 10.0.0.1 was becoming ::ffff:10.0.0.1, which caused iplong to report the address as invalid instead of parsing it correctly.
The correct fix would of course be to update my infrastructure so that it's properly IPv6-compatible; but in the context of my particular situation, this would involve a lot of re-engineering. So in the meantime, I worked around the issue using this quick and dirty hack:
<?php
$ip = htmlspecialchars($_SERVER['REMOTE_ADDR']);
if (strpos($ip, '::') === 0) {
$ip = substr($ip, strrpos($ip, ':')+1);
}
$host = ip2long($ip);
?>
Ugly but functional.
[#28] jpmarcotte at gmail dot com [2008-05-20 15:10:33]
In using a combination of jbothe's code below and some of the "$mask = 0xFFFFFFFF << (32 - $bits)" type code, I ran into an error with some later calculations on a 64 bit machine.
Keep in mind that when you're analyzing numbers meant to be treated as 32 bits wide (such as IP addresses), you may want to truncate them. Without relying on other libraries, it was simple enough to follow any calculations that may end with different results on a 64 bit machine with " & 0xFFFFFFFF"
Though in many cases, it seems like it might be simpler to just use "~0 << ..." for initial shifting to create the network mask instead of "0xFFFFFFFF << ...". I don't know that it guarantees further operations to work as expected though.
[#29] lutel [2008-04-09 04:45:47]
here is netMatch function which is the fastest I could wrote, I hope developers will include native function soon...
<?php
function netMatch ($CIDR,$IP) {
list ($net, $mask) = explode ('/', $CIDR);
return ( ip2long ($IP) & ~((1 << (32 - $mask)) - 1) ) == ip2long ($net);
}
?>
[#30] php dot net at kenman dot net [2008-04-01 10:02:32]
To nate, who advises that there is no reason to use an unsigned version of the IP in a MySQL DB:
I think it would depend on your application, but personally, I find it useful to store IP's as unsigneds since MySQL has 2 native functions, INET_ATON() and INET_NTOA(), which work the same as ip2long()/long2ip() _except_ that they generate the unsigned counterpart. So if you want, you could do:
-- IANA Class-B reserved/private
SELECT * FROM `servers`
WHERE `ip` >= INET_ATON('192.168.0.0')
AND `ip` <= INET_ATON('192.168.255.255');
In my current application, I find it easier to use the MySQL built-ins than the PHP counter-parts.
In case you're curious as to the names ATON and NTOA:
ATON = address to number aka. ip2long
NTOA = number to address aka. long2ip
[#31] johniskew at yahoo dot com [2008-03-24 10:14:22]
The following function ipToHex will take an IP (v4 or v6 formatted) and if it is valid, will return a 32 byte hex string representing that address. Requires php >= 5.2 as it uses the filter_var function.
<?php
function ipToHex($ipAddress) {
$hex = '';
if(strpos($ipAddress, ',') !== false) {
$splitIp = explode(',', $ipAddress);
$ipAddress = trim($splitIp[0]);
}
$isIpV6 = false;
$isIpV4 = false;
if(filter_var($ipAddress, FILTER_VALIDATE_IP, FILTER_FLAG_IPV6) !== false) {
$isIpV6 = true;
}
else if(filter_var($ipAddress, FILTER_VALIDATE_IP, FILTER_FLAG_IPV4) !== false) {
$isIpV4 = true;
}
if(!$isIpV4 && !$isIpV6) {
return false;
}
// IPv4 format
if($isIpV4) {
$parts = explode('.', $ipAddress);
for($i = 0; $i < 4; $i++) {
$parts[$i] = str_pad(dechex($parts[$i]), 2, '0', STR_PAD_LEFT);
}
$ipAddress = '::'.$parts[0].$parts[1].':'.$parts[2].$parts[3];
$hex = join('', $parts);
}
// IPv6 format
else {
$parts = explode(':', $ipAddress);
// If this is mixed IPv6/IPv4, convert end to IPv6 value
if(filter_var($parts[count($parts) - 1], FILTER_VALIDATE_IP, FILTER_FLAG_IPV4) !== false) {
$partsV4 = explode('.', $parts[count($parts) - 1]);
for($i = 0; $i < 4; $i++) {
$partsV4[$i] = str_pad(dechex($partsV4[$i]), 2, '0', STR_PAD_LEFT);
}
$parts[count($parts) - 1] = $partsV4[0].$partsV4[1];
$parts[] = $partsV4[2].$partsV4[3];
}
$numMissing = 8 - count($parts);
$expandedParts = array();
$expansionDone = false;
foreach($parts as $part) {
if(!$expansionDone && $part == '') {
for($i = 0; $i <= $numMissing; $i++) {
$expandedParts[] = '0000';
}
$expansionDone = true;
}
else {
$expandedParts[] = $part;
}
}
foreach($expandedParts as &$part) {
$part = str_pad($part, 4, '0', STR_PAD_LEFT);
}
$ipAddress = join(':', $expandedParts);
$hex = join('', $expandedParts);
}
// Validate the final IP
if(!filter_var($ipAddress, FILTER_VALIDATE_IP)) {
return false;
}
return strtolower(str_pad($hex, 32, '0', STR_PAD_LEFT));
}
$ips = array(
'::192.168.0.2',
'0:0:0:0:0:0:192.168.0.2',
'192.168.0.2',
'::C0A8:2',
'0:0:0:0:0:0:C0A8:2'
);
$finals = array();
foreach($ips as $ip) {
$finals[] = ipToHex($ip);
}
var_dump($finals);
?>
[#32] og_sam at homail dot com [2008-03-16 07:15:34]
@ samb057 at gmail dot com
This function will not return a correct bigint.
base_convert() is limited to the double type,
which usually counts 64bits and not 128 like an IPv6 address.
For example:
FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF
will __NOT__ be converted to 128^2 -1
You should use a bigint lib's multiplication function,
with decimal shifting factors defined as string constants (much faster than recalculating them every time).
Grab 8 short integers (the 16bits between the ':' with base_convert($hex,16,10)) and shift the 7 higher ones with a bigint_multiplication.
Of course you can also do it with less bigint ops using 32bit integers, but then you should create them this way (additionally 'sprintf' for making an uint32 string):
$uint32= sprintf('%u',intval(base_convert($hex,16,10)));
Finally, "bigint_add" the shifted ones to the least (unshifted) significant interger string and be happy
PS: I'm working on an IPv4/6 tool class with raw (also endianness), 6/4 compatibility and validation methods,
I'll post it here as soon as it's finished and tested.
[#33] mhakopian at gmail dot com [2008-02-11 11:46:01]
Just a little function to check visitor's ip if it is in given range or not (I couldn't find anywhere so i improvise):
<?php
function in_ip_range($ip_one, $ip_two=false){
if($ip_two===false){
if($ip_one==$_SERVER['REMOTE_ADDR']){
$ip=true;
}else{
$ip=false;
}
}else{
if(ip2long($ip_one)<=ip2long($_SERVER['REMOTE_ADDR']) && ip2long($ip_two)>=ip2long($_SERVER['REMOTE_ADDR'])){
$ip=true;
}else{
$ip=false;
}
}
return $ip;
}
//usage
echo in_ip_range('192.168.0.0','192.168.1.254');
?>
[#34] curda2 at hotmail dot com - Dim Works dot org [2008-02-10 23:01:57]
The things that this function do is:
Structure of function:
<?php
$ip = getenv(REMOTE_ADDR);
$numbers=explode (".",$ip);
$code=($numbers[0] * 16777216) + ($numbers[1] * 65536) + ($numbers[2] * 256) + ($numbers[3]);
//$code is the final variant
?>
that is similar to do this:
<?php
$ip = getenv(REMOTE_ADDR);
$code=ip2long($ip);
//$code is the final variant
?>
[#35] dbemowsk [2008-01-26 07:41:00]
A common way to express IP addresses and subnet masks is to use what is refered to as slash notation. Instead of writing out:
IP = 192.168.100.2
Subnet Mask = 255.255.240.0
Writing out "192.168.100.2/20" is much shorter.
If you are looking for a way to convert a subnet mask into it's slash notation counterpart, here is a single line of code that can perform this task.
<?php
$slash_notation = strlen(preg_replace("/0/", "", decbin(ip2long($subnet_mask))));
?>
For example...
A subnet mask of 255.255.240.0 expressed in binary looks like this:
11111111111111111111000000000000
This gives us a slash notation of 20 which is simply counting the number of 1's in the masks binary representation.
Here is a function that uses this code to return an IP address and subnet mask in slash notation.
<?php
function slash_notation($ip, $mask) {
return $ip."/".strlen(preg_replace("/0/", "", decbin(ip2long($mask))));
}
?>
calling slash_notation("192.168.100.2", "255.255.255.0"); will return "192.168.100.2/24".
Hope this is of use to some of you out there.
[#36] nate [2007-12-18 01:44:16]
Thanks to sealbreaker for the conversion method. I'd seen
<?php (ip2long($ip) & 0x7FFFFFFF) + 0x80000000 ?>
before, but noticed it didn't work on all ips. You've discovered why. :)
In case anyone is wondering what sealbreaker means by obtaining an "integer value", s/he means an unsigned int, vs the signed version ip2long provides. Well, technically this conversion will sometimes give you a float since php's integer type is signed.
The good news is that long2ip will correctly handle converting these signed versions back into ips.
So, to get an unsigned version of an ip (ie, always >= 0):
<?php
$ip = '127.0.0.1';
// may return a php int or float
$signed = substr($ip, 0, 3) > 127 ? ((ip2long($ip) & 0x7FFFFFFF) + 0x80000000) : ip2long($ip);
// will return a string version
$signed2 = sprintf('%u', ip2long($ip));
var_dump($signed, $signed2, long2ip($signed), long2ip($signed2));
?>
P.S.: If you're storing IPs in MySQL, there is NO POINT in converting to these unsigned values to place in an INT UNSIGNED column. Just use an INT SIGNED column, and directly use the result from ip2long. The only reason you should really need to force your ip2long result into its unsigned version is if you need to compare them with another source that uses unsigned (ie: some IP database lookup utils use unsigned).
[#37] sealbreaker at email dot com [2007-11-03 00:47:54]
As a note : if you are using (PHP 4, PHP 5) and are looking to get the integer value of an IP address, i have found that the following works flawlessly for converting to and from IPv4 and it's integer equivalent. I must give credit elsewhere for this portion of the code (ip2long($ip) & 0x7FFFFFFF) + 0x80000000). I looked but was unable to find the comment where it was included.
$ip = "127.0.0.0"; // as an example
$integer_ip = (substr($ip, 0, 3) > 127) ? ((ip2long($ip) & 0x7FFFFFFF) + 0x80000000) : ip2long($ip);
echo $integer_ip; // integer value of IP address
echo long2ip($integer_ip); // convert to an IPv4 formatted address
-----------------------
Results are as follows:
-----------------------
2130706432
127.0.0.0
-----------------------
255.255.255.255 (converts to) 4294967295 (and back to) 255.255.255.255
209.65.0.0 (converts to) 3510697984 (and back to) 209.65.0.0
12.0.0.0 (converts to) 201326592 (and back to) 12.0.0.0
1.0.0.0 (converts to) 16777216 (and back to) 1.0.0.0
[#38] ir on ir id is at gm ai ld ot co m [2007-10-20 23:54:56]
Keep in mind that storing IP addresses inside of your database as integers (rather than 15 character strings in decimal format, or 8 character strings in hex format) is hundreds of times faster.
Take the typical case of a MySQL database doing a search for an IP address on thousands (or millions!) of rows; you're either doing a string compare for each entry, or an integer equation. If you do your indexes correctly, your lookups should be literally 100x faster using an INT rather than a VARCHAR.
Also note that an integer doesn't need to be escaped when passed to a database. :)
[#39] andrew dot minerd at sellingsource dot com [2007-07-20 17:15:20]
A somewhat more efficient alternative to convert the signed integer return by ip2long:
$float = ((ip2long($ip) & 0x7FFFFFFF) + 0x80000000);
[#40] one tiger one at gee mail dot comm [2007-04-02 07:49:00]
I wrote a small function to validate a netmask (We have a form where the netmask of a given server is entered in, and I wanted to make sure it was valid). Hope this is useful.
<?php
// Netmask Validator //
function checkNetmask($ip) {
if (!ip2long($ip)) {
return false;
} elseif(strlen(decbin(ip2long($ip))) != 32 && ip2long($ip) != 0) {
return false;
} elseif(ereg('01',decbin(ip2long($ip))) || !ereg('0',decbin(ip2long($ip)))) {
return false;
} else {
return true;
}
}
?>
[#41] laacz at php dot net [2007-02-16 01:06:08]
Just to save you some time.
Beware that octets in IP address are being treated as numbers. So, '10.0.0.11' is not equal to '10.0.0.011'. '011' is octal number (base 8), so it converts to '9'. You can even go further and see that '10.0.0.0xa' also works (equals to '10.0.0.16').
This is not PHP issue, though.
[#42] samb057 at gmail dot com [2006-12-26 00:37:17]
Convert an ipv6 address to an base 10 integer
<?php
function ip2long6($ip)
{
if (substr_count($ip, '::'))
{
$ip = str_replace('::', str_repeat(':0000', 8 - substr_count($ip, ':')) . ':', $ip) ;
}
$ip = explode(':', $ip) ;
$r_ip = '' ;
foreach ($ip as $v)
{
$r_ip .= str_pad(base_convert($v, 16, 2), 16, 0, STR_PAD_LEFT) ;
}
return base_convert($r_ip, 2, 10) ;
}
?>
[#43] samb057 at gmail dot com [2006-12-26 00:20:48]
Here's a simple IP address match checking function.
It takes 3 arguments: ip address to check (after ip2long), ip address to check against (after ip2long), and mask to check against (integer 0-32).
Just make sure you perform ip2long on the ip addresses before inputting them to the function.
<?php
function match_ip($check_ip, $match_ip, $match_mask = 32)
{
for ($i = 0 ; $i < $match_mask ; $i++)
{
$n = pow(2, 31 - $i) ;
if (($n & $check_ip) != ($n & $match_ip))
{
return FALSE ;
}
}
return TRUE ;
}
?>
I've been looking for a function like this for a while, i hope it helps someone.
[#44] Ian B [2006-12-24 04:22:24]
NOTE: ip2long() should NOT be used for CIDR calculation.
Instead, you should use something like the following:
<?php
list($base, $bits) = explode('/', $CIDR);
list($a, $b, $c, $d) = explode('.', $base);
$i = ($a << 24) + ($b << 16) + ($c << 8) + $d;
$mask = $bits == 0 ? 0 : (~0 << (32 - $bits));
$low = $i & $mask;
$high = $i | (~$mask & 0xFFFFFFFF);
list($a, $b, $c, $d) = explode('.', $iptocheck);
$check = ($a << 24) + ($b << 16) + ($c << 8) + $d;
if ($check >= $low && $check <= $high)
return 1;
else
return 0;
?>
This means that you should check to see if the IP
address is of the correct format each time.
[#45] jgwright [2006-10-25 12:13:36]
Here is a modified version of the code posted by legetz81 (AT) yahoo (dot) com. It handles the shorter, and more common, notation: "189.128/11".
<?php
$ip_addr_cidr = "192.168.37.215/27";
cidr($ip_addr_cidr);
function cidr($ip_addr_cidr) {
$ip_arr = explode('/', $ip_addr_cidr);
$dotcount = substr_count($ip_arr[0], ".");
$padding = str_repeat(".0", 3 - $dotcount);
$ip_arr[0].=$padding;
$bin = '';
for($i=1;$i<=32;$i++) {
$bin .= $ip_arr[1] >= $i ? '1' : '0';
}
$ip_arr[1] = bindec($bin);
$ip = ip2long($ip_arr[0]);
$nm = ip2long($ip_arr[1]);
$nw = ($ip & $nm);
$bc = $nw | (~$nm);
echo "Number of Hosts: " . ($bc - $nw - 1) . "\n";
echo "Host Range: " . long2ip($nw + 1) . " -> " . long2ip($bc - 1) . "\n";
}
?>
[#46] dh06 at biztechwiz dot com [2006-10-24 09:59:26]
I made one tiny change to Stephane's routine below when I had problems with spaces in an IP range. I moved the trim function before the ip2long call.
Thanks Stephane!
Dirk.
<?php
function netMatch($network, $ip) {
$network=trim($network);
$ip = trim($ip);
$d = strpos($network,"-");
if ($d===false) {
$ip_arr = explode('/', $network);
if (!preg_match("@\d*\.\d*\.\d*\.\d*@",$ip_arr[0],$matches)){
$ip_arr[0].=".0"; // Alternate form 194.1.4/24
}
$network_long = ip2long($ip_arr[0]);
$x = ip2long($ip_arr[1]);
$mask = long2ip($x) == $ip_arr[1] ? $x : (0xffffffff << (32 - $ip_arr[1]));
$ip_long = ip2long($ip);
return ($ip_long & $mask) == ($network_long & $mask);
}
else {
$from = ip2long(trim(substr($network,0,$d)));
$to = ip2long(trim(substr($network,$d+1)));
$ip = ip2long($ip);
return ($ip>=$from and $ip<=$to);
}
}
?>
[#47] legetz81 (AT) yahoo (dot) com [2006-03-30 06:15:07]
Here is a script that will calculate host range and number of hosts with a given ip address CIDR notation (modified code which was posted by phl AT cyways.com):
<?php
$ip_addr_cidr = "192.168.37.215/27";
$ip_arr = explode('/', $ip_addr_cidr);
$bin = '';
for($i=1;$i<=32;$i++) {
$bin .= $ip_arr[1] >= $i ? '1' : '0';
}
$ip_arr[1] = bindec($bin);
$ip = ip2long($ip_arr[0]);
$nm = ip2long($ip_arr[1]);
$nw = ($ip & $nm);
$bc = $nw | (~$nm);
echo "Number of Hosts: " . ($bc - $nw - 1) . "\n";
echo "Host Range: " . long2ip($nw + 1) . " -> " . long2ip($bc - 1) . "\n";
?>
This will produce:
Number of Hosts: 30
Host Range: 192.168.37.193 -> 192.168.37.222
[#48] [2005-09-01 12:47:51]
<?php
# m.ozarek
#
# Check if given mask is correct. You can check the short format mask
# like 8,16,24 or long format like 255.255.255.0
#
function isIpMask($mask){
$format = '';
if(preg_match("/[0-9]++\.[0-9]++\.[0-9]++\.[0-9]++/",$mask)){
$format = "long";
}else{
if($mask<=30){
$format = "short";
}else{
return false;
}
}
switch($format){
case long;
$mask = decbin(ip2long($mask));
break;
case short:
$tmp = $mask;
for($i=0; $i < $mask ;$i++){
$tmp.= 1;
}
for($j=0; $j < (32 - $mask);$j++){
$tmp.= 0;
}
$mask = $tmp;
break;
}
if(strlen($mask) <= 32){
for($i=0;$i<=32 ;$i++){
$bit = substr($mask,$i,1);
if(($bit - substr($mask,$i+1,1)) < 0){
return false;
}
}
}
return true;
}
# EXAMPLE
# isIpMask("255.255.255.0") -> return true
# isIpMask("24") -> return true
# isIpMask("5.5.5.5") -> return false
?>
[EDIT BY danbrown AT php DOT net: Contains a fix provided by (greg AT netops DOT gvtc DOT com) on 19-Dec-2005.]
[#49] ken at expitrans dot com [2005-08-31 15:31:52]
Below is a merged form of all various notes, and a better (and correct) network matching function.
<?php
function net_match($network, $ip) {
// determines if a network in the form of 192.168.17.1/16 or
// 127.0.0.1/255.255.255.255 or 10.0.0.1 matches a given ip
$ip_arr = explode('/', $network);
$network_long = ip2long($ip_arr[0]);
$x = ip2long($ip_arr[1]);
$mask = long2ip($x) == $ip_arr[1] ? $x : 0xffffffff << (32 - $ip_arr[1]);
$ip_long = ip2long($ip);
// echo ">".$ip_arr[1]."> ".decbin($mask)."\n";
return ($ip_long & $mask) == ($network_long & $mask);
}
echo net_match('192.168.17.1/16', '192.168.15.1')."\n"; // returns true
echo net_match('127.0.0.1/255.255.255.255', '127.0.0.2')."\n"; // returns false
echo net_match('10.0.0.1', '10.0.0.1')."\n"; // returns true
?>
[#50] tristram at ccteam dot ru [2005-07-26 06:33:52]
<?php
if (!function_exists("ip2long"))
{
function ip2long($ip)
{
$ip = explode(".",$ip);
if (!is_numeric(join(NULL,$ip)) or count($ip) != 4) {return false;}
else {return $ip[3]+256*$ip[2]+256*256*$ip[1]+256*256*256*$ip[0];}
}
}
?>
[#51] cam at wecreate dot com [2005-07-20 09:37:25]
A simple function to compare two IP addresses against a netmask. Useful if you're locking down a web app with an IP address, but can't force the IPs to be exactly the same.
<?php
function ipcompare ($ip1, $ip2, $mask) {
$masked1 = ip2long($ip1) & ip2long($mask); // bitwise AND of $ip1 with the mask
$masked2 = ip2long($ip2) & ip2long($mask); // bitwise AND of $ip2 with the mask
if ($masked1 == $masked2) return true;
else return false;
}
?>
Examples:
<?php
ipcompare("192.168.1.63","192.168.1.65","255.255.255.0") // true
ipcompare("192.168.1.63","192.168.1.65","255.255.255.192") // false
?>
[#52] Paragina Silviu [2005-07-12 08:41:03]
Note: ip2long and long2ip do not function as the c linux functions inet_addr and inet_ntoa. They store the long in reverse byte order (little endian vs big endian i guess).
For example you send 10.0.0.1 to inet_ntoa you take the long from the result and you pass it to long2ip you get 1.0.0.10. You won't run into this issue unless you use a database both from c linux programs and php scripts.
My first idea was to reverse the long, but unfortunatley the long was stored as unsigned and i got a lot of problems doing calculations with it (some operations would work well others not; probably it was stored as float i do not know for sure...)
So my solution was
<?php
function str_rev_ip($str)
{
$ar=explode(".",$str);
return "$ar[3].$ar[2].$ar[1].$ar[0]";
}
?>
and i take the result from inet_ntoa and parse it as str_rev_ip(long2ip($var))
[#53] tomlove at gmail dot com [2005-07-03 16:09:55]
A quick and efficient way to compare two IPs with a given mask:
<?php
function ipmatch ($ip1, $ip2, $mask) {
if ((ip2long($ip1) & ~(pow(2, 32-$mask)-1)) == (ip2long($ip2) & ~(pow(2, 32-$mask)-1))) return true;
else return false;
}
?>
Here's an application of it that selects the best IP given the choice of a (possibly private or invalid) forwarded address or a (possibly proxy) apparent address:
<?php
$a = $_SERVER['HTTP_X_FORWARDED_FOR'];
if ($a == '' || ipmatch($a, "10.0.0.0", 8) || ipmatch($a, "172.16.0.0", 12) || ipmatch($a, "192.168.0.0", 16) || ipmatch($a, "255.255.255.255", 32)) $ip = $_SERVER['REMOTE_ADDR'];
else $ip = $a;
?>
Or use it to ban people:
<?php
$banned_ip = '135.23.12.3';
if (ipmatch($ip, $banned_ip, 32)) die('BANNED!');
?>
The bitwise comparison the function uses can be done in SQL to do ban matches right in your database.
[#54] lawpoop at gmail dot com [2005-04-06 15:29:51]
Here is a function that tells you if an ip address is in a CIDR range. However, the CIDR argument can be an array of CIDRs. This was created from other matchCIDR functions in the user notes.
<?php
function matchCIDR($addr, $cidr) {
// $addr should be an ip address in the format '0.0.0.0'
// $cidr should be a string in the format '100/8'
// or an array where each element is in the above format
$output = false;
if ( is_array($cidr) ) {
foreach ( $cidr as $cidrlet ) {
if ( matchCIDR( $addr, $cidrlet) ) {
$output = true;
}
}
} else {
list($ip, $mask) = explode('/', $cidr);
$mask = 0xffffffff << (32 - $mask);
$output = ((ip2long($addr) & $mask) == (ip2long($ip) & $mask));
}
return $output;
}
?>
[#55] mailNO at SPAMdapuzz dot com [2005-02-13 11:05:21]
a little function to make a range in this form:
0.0.0.1/0.0.0.255 ==> 0.0.0.1/255
0.0.0.1/255.255.255.255 ==> 0.0.0.1/255.255.255.255
<?php
$primo = "62.4.32.0";
$ultimo = "62.4.63.255";
echo do_range($primo,$ultimo); //Example
function do_range($primo,$ultimo) {
list($a,$b,$c,$d)=explode(".",$primo);
list($e,$f,$g,$h)=explode(".",$ultimo);
if ($a !== $e) return "$primo/$ultimo";
else {
if ($b !== $f) return "$primo/$f.$g.$h";
else{
if ($c !== $g) return "$primo/$g.$h";
else {
if ($d !== $h) return "$primo/$h";
else return -1; //error
}
}
}
}
?>
Please write me if you have any suggestion
[#56] frank at vista dot com [2005-01-26 17:43:42]
remixing mediator's function further:
<?php
function matchCIDR($addr, $cidr) {
list($ip, $mask) = explode('/', $cidr);
return (ip2long($addr) >> (32 - $mask) == ip2long($ip) >> (32 - mask));
}
?>
[#57] [2004-12-01 06:06:00]
I re-wrote the functions from jbothe at hotmail dot com as a little exercise in OO and added a couple of extra functions.
<?php
//--------------
// IPv4 class
class ipv4
{
var $address;
var $netbits;
//--------------
// Create new class
function ipv4($address,$netbits)
{
$this->address = $address;
$this->netbits = $netbits;
}
//--------------
// Return the IP address
function address() { return ($this->address); }
//--------------
// Return the netbits
function netbits() { return ($this->netbits); }
//--------------
// Return the netmask
function netmask()
{
return (long2ip(ip2long("255.255.255.255")
<< (32-$this->netbits)));
}
//--------------
// Return the network that the address sits in
function network()
{
return (long2ip((ip2long($this->address))
& (ip2long($this->netmask()))));
}
//--------------
// Return the broadcast that the address sits in
function broadcast()
{
return (long2ip(ip2long($this->network())
| (~(ip2long($this->netmask())))));
}
//--------------
// Return the inverse mask of the netmask
function inverse()
{
return (long2ip(~(ip2long("255.255.255.255")
<< (32-$this->netbits))));
}
}
$ip = new ipv4("192.168.2.1",24);
print "Address: $ip->address()\n";
print "Netbits: $ip->netbits()\n";
print "Netmask: $ip->netmask()\n";
print "Inverse: $ip->inverse()\n";
print "Network: $ip->network()\n";
print "Broadcast: $ip->broadcast()\n";
?>
[#58] DivineHawk [2004-10-30 00:38:46]
For PHP5 I had to replace:
$mask_long= pow(2,32)-pow(2,(32-$ip_arr[1]));
-with-
$mask_long = 0xffffffff << (32 - $ip_arr[1]);
in dzver's IP_Match Function below.
[#59] mediator [2004-06-02 03:50:09]
Another function for matching $_SERVER['REMOTE_ADDR'] against CIDR.
<?php
function matchCIDR($addr, $cidr) {
list($ip, $mask) = explode('/', $cidr);
$mask = 0xffffffff << (32 - $mask);
return ((ip2long($addr) & $mask) == (ip2long($ip) & $mask));
}
?>
[#60] dzver [2004-04-15 05:12:10]
Mix of rbsmith's function and pasted above url:
<?php
// returns 1 if $ip is part of $network
function IP_Match($network, $ip) {
$ip_arr = explode("/",$network);
$network_long=ip2long($ip_arr[0]);
$mask_long= pow(2,32)-pow(2,(32-$ip_arr[1]));
$ip_long=ip2long($ip);
if (($ip_long & $mask_long) == $network_long) {
return 1;
} else {
return 0;
}
}
// usage
$network="200.100.50.0/23";
$ip="200.100.51.55";
$ip2="200.100.52.2";
echo IP_Match($network, $ip); //prints 1
echo IP_Match($network, $ip2); //prints 0
?>
[#61] jbothe at hotmail dot com [2003-11-26 23:01:11]
The following script will print out subnet statistics when you supply the IP Address and Subnet Mask. Usefull to calculate the broadcast address and network address as well as the number of hosts and the range of IP addresses in the subnet.
#!/usr/local/bin/php
<?php
$ip_addr = "172.14.1.57";
$subnet_mask = "255.255.255.0";
$ip = ip2long($ip_addr);
$nm = ip2long($subnet_mask);
$nw = ($ip & $nm);
$bc = $nw | (~$nm);
echo "IP Address: " . long2ip($ip) . "\n";
echo "Subnet Mask: " . long2ip($nm) . "\n";
echo "Network Address: " . long2ip($nw) . "\n";
echo "Broadcast Address: " . long2ip($bc) . "\n";
echo "Number of Hosts: " . ($bc - $nw - 1) . "\n";
echo "Host Range: " . long2ip($nw + 1) . " -> " . long2ip($bc - 1) . "\n";
?>
Produces the output:
IP Address: 172.14.1.57
Subnet Mask: 255.255.255.0
Network Address: 172.14.1.0
Broadcast Address: 172.14.1.255
Number of Hosts: 254
Host Range: 172.14.1.1 -> 172.14.1.254
[#62] daevid at daevid dot com [2003-10-13 21:23:22]
<?php
function CalculateIPRange($iprange)
{
// Daevid Vincent [daevid@daevid.com] 10.13.03
// This function will return an array of either a negative error code
// or all possible IP addresses in the given range.
// format is NNN.NNN.NNN.NNN - NNN.NNN.NNN.NNN (spaces are okay)
$temp = preg_split("/-/",$iprange, -1, PREG_SPLIT_NO_EMPTY);
$QRange1 = $temp[0];
$QRange2 = $temp[1];
if ($QRange2 == "") return array($QRange1); //special case, they didn't put a second quad parameter
//basic error handling to see if it is generally a valid IP in the form N.N.N.N
if ( preg_match("/\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}/",$QRange1) != 1 ) return array(-1);
if ( preg_match("/\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}/",$QRange2) != 1 ) return array(-1);
$quad1 = explode(".",$QRange1);
$quad2 = explode(".",$QRange2);
reset ($quad1);
while (list ($key, $val) = each ($quad1))
{
$quad1[$key] = intval($val);
if ($quad1[$key] < 0 || $quad1[$key] > 255) return array(-2);
}
reset ($quad2);
while (list ($key, $val) = each ($quad2))
{
$quad2[$key] = intval($val);
if ($quad2[$key] < 0 || $quad2[$key] > 255) return array(-2);
}
$startIP_long = sprintf("%u",ip2long($QRange1));
$endIP_long = sprintf("%u",ip2long($QRange2));
$difference = $endIP_long - $startIP_long;
//echo "startIP_long = ".$startIP_long." and endIP_long = ".$endIP_long." difference = ".$difference."<BR>";
$ip = array();
$k = 0;
for ($i = $startIP_long; $i <= $endIP_long; $i++)
{
$temp = long2ip($i);
//this is a total hack. there must be a better way.
$thisQuad = explode(".",$temp);
if ($thisQuad[3] > 0 && $thisQuad[3] < 255)
$ip[$k++] = $temp;
}
return $ip;
} //CalculateIPRange()
?>
[#63] anderson at piq dot com dot br [2003-08-06 22:02:19]
If you want to get the interface of an IP, based on the local route table, use this.
<?php
function GetIfaceforIP($user_ip)
{
$route = "/bin/netstat -rn";
exec($route, $aoutput);
foreach($aoutput as $key => $line)
{
if($key > 1)
{
$line = ereg_replace("[[:space:]]+",",",$line);
list($network, $gateway, $mask, $flags, $mss, $window, $irtt, $iface) = explode(",", $line)
if((ip2long($user_ip) & ip2long($mask)) == ip2long($network))
{
return $iface;
}
}
}
}
?>
[#64] rbsmith [2003-06-01 18:29:16]
Yet another word on IP_Match here is the complete functions
as described by php-net at dreams4net dot com on 08-Aug-2002 09:31
<?php
# determine if an IP address is within
# a particular network with mask
function IP_Match($network, $mask, $ip) {
$ip_long=ip2long($ip);
$network_long=ip2long($network);
$mask_long=ip2long($mask);
if (($ip_long & $mask_long) == $network_long) {
return true;
} else {
return false;
}
}
?>
Thank you, it is simple, fast, and best of all works!
[#65] phl AT cyways.com [2001-10-22 16:36:02]
Here's a function I whipped up today to deduce some important network information given a hostname (or its IP address) and its subnet mask:
<?php
function find_net($host,$mask) {
### Function to determine network characteristics
### $host = IP address or hostname of target host (string)
### $mask = Subnet mask of host in dotted decimal (string)
### returns array with
### "cidr" => host and mask in CIDR notation
### "network" => network address
### "broadcast" => broadcast address
###
### Example: find_net("192.168.37.215","255.255.255.224")
### returns:
### "cidr" => 192.168.37.215/27
### "network" => 192.168.37.192
### "broadcast" => 192.168.37.223
###
$bits=strpos(decbin(ip2long($mask)),"0");
$net["cidr"]=gethostbyname($host)."/".$bits;
$net["network"]=long2ip(bindec(decbin(ip2long(gethostbyname($host))) & decbin(ip2long($mask))));
$binhost=str_pad(decbin(ip2long(gethostbyname($host))),32,"0",STR_PAD_LEFT);
$binmask=str_pad(decbin(ip2long($mask)),32,"0",STR_PAD_LEFT);
for ($i=0; $i<32; $i++) {
if (substr($binhost,$i,1)=="1" || substr($binmask,$i,1)=="0") {
$broadcast.="1";
} else {
$broadcast.="0";
}
}
$net["broadcast"]=long2ip(bindec($broadcast));
return $net;
}
?>