简体中文(ZH-CN) English(EN) 繁体中文(ZH-TW) 日本語(JA) 한국어(KO) Melayu(MS) Français(FR) Deutsch(DE)
Rumah > pangkalan data > tutorial mysql > teks badan

【原创】haproxy + varnish + nginx + fastCGi + mysql 搭建

WBOY
Lepaskan： 2016-06-07 16:30:17
asal
911 orang telah melayarinya

二、172.26.11.71 172.26.11.72 安装varnish mkdir -p /data/softwaremkdir -p /data/srcmkdir -p /data/confmkdir -p /data/logsyum -y install gcc gcc-c++ gcc-g77 flex bison autoconf automake bzip2-devel zlib-devel ncurses-devel libjpeg-devel lib

二、172.26.11.71 172.26.11.72 安装varnish

mkdir -p /data/software
mkdir -p /data/src
mkdir -p /data/conf
mkdir -p /data/logs
yum -y install gcc gcc-c++ gcc-g77 flex bison autoconf automake bzip2-devel zlib-devel ncurses-devel libjpeg-devel libpng-devel libtiff-devel freetype-devel pam-devel  gettext-devel
yum -y install gcc gcc-c++ autoconf libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2 libxml2-devel zlib zlib-devel glibc glibc-devel glib2 glib2-devel bzip2 bzip2-devel ncurses ncurses-devel curl curl-devel e2fsprogs e2fsprogs-devel krb5 krb5-devel libidn libidn-devel openssl openssl-devel openldap openldap-devel nss_ldap openldap-clients openldap-servers libtool
yum -y install rsyslog gcc gcc-c++ libstdc++-devel httpd-devel pcre perl pcre-devel zlib zlib-devel GeoIP GeoIP-devel
cd /data/software/
wget http://repo.varnish-cache.org/source/varnish-3.0.3.tar.gz
cd /data/src/
tar zxf ../software/varnish-3.0.3.tar.gz
cd varnish-3.0.3
./autogen.sh
./configure --prefix=/usr/local/varnish PKG_CONFIG_PATH=/usr/lib/pkgconfig
make && make install
#指定一下命令的快捷方式
ln -s /usr/local/varnish/sbin/varnishd /usr/bin/varnishd
ln -s /usr/local/varnish/sbin/varnishd /usr/sbin/varnishd
ln -s /usr/local/varnish/bin/varnishlog /usr/bin/varnishlog
ln -s /usr/local/varnish/bin/varnishncsa /usr/bin/varnishncsa
ln -s /usr/local/varnish/bin/varnishadm /usr/bin/varnishadm
ln -s /usr/local/varnish/bin/varnishstat   /usr/bin/varnishstat
#配置文件也指定到熟悉的位置
ln -s /usr/local/varnish/etc/varnish/default.vcl  /etc/varnish.conf
#看看是否已正确安装了
varnishd -V
Salin selepas log masuk

vi /etc/varnish.conf

# This is a basic VCL configuration file for varnish.  See the vcl(7)
# man page for details on VCL syntax and semantics.
#
# Default backend definition.  Set this to point to your content
# server.
#
backend web1 {
        .host = "172.26.11.73";
        .port = "8080";
        .connect_timeout = 1s;
        .first_byte_timeout = 5s;
        .between_bytes_timeout = 2s;
}
backend web2 {
        .host = "172.26.11.74";
        .port = "8080";
        .connect_timeout = 1s;
        .first_byte_timeout = 5s;
        .between_bytes_timeout = 2s;
}
director load random {
    {
      .backend = web1;
      .weight = 5;
     }
     {
       .backend = web2;
       .weight = 5;
     }
}
#
# Below is a commented-out copy of the default VCL logic.  If you
# redefine any of these subroutines, the built-in logic will be
# appended to your code.
acl purge {
       "localhost";
       "127.0.0.1";
}
sub vcl_recv {
	if (req.request == "PURGE") {
		if (!client.ip ~ purge) {
			error 405 "Not allowed.";
		}
		return (lookup);
	}
	if (req.restarts == 0) {
		if (req.http.x-forwarded-for) {
			set req.http.X-Forwarded-For = req.http.X-Forwarded-For + ", " + client.ip;
		} else {
			set req.http.X-Forwarded-For = client.ip;
		}
	}
	if (req.request == "GET" && req.url ~ "\.(js|css|html|jpg|png|gif|swf|jpeg|ico)$") {
		unset req.http.cookie;
	}
	if (req.http.host ~ "^(.*)ijie.com$") {
		set req.backend = load;
		if (req.request != "GET" && req.request != "HEAD") {
			return (pipe);
		}
		elseif(req.url ~ "\.(php|cgi)($|\?)") {
			return (pass);
			#return (lookup);
		}
		else {
			return (lookup);
		}
	}
	else {
		error 404 "Tyler's Server";
		return (lookup);
	}
}
#
sub vcl_pipe {
#     # Note that only the first request to the backend will have
#     # X-Forwarded-For set.  If you use X-Forwarded-For and want to
#     # have it set for all requests, make sure to have:
#     # set bereq.http.connection = "close";
#     # here.  It is not set by default as it might break some broken web
#     # applications, like IIS with NTLM authentication.
     return (pipe);
 }
#
sub vcl_pass {
    return (pass);
}
#
sub vcl_hash {
	hash_data(req.url);
	if (req.http.host) {
		hash_data(req.http.host);
	} else {
		hash_data(server.ip);
	}
	return (hash);
}
#
sub vcl_hit {
#       if(req.http.Cache-Control~"no-cache"||req.http.Cache-Control~"max-age=0"||req.http.Pragma~"no-cache"){
#               set obj.ttl=0s;
#               return (restart);
#       }
    return (deliver);
}
#
sub vcl_miss {
    return (fetch);
}
sub vcl_fetch {
#    if (beresp.ttl 
 
     "} + obj.status + " " + obj.response + {"
     Error "} + obj.status + " " + obj.response + {"
     "} + obj.response + {"
     Guru Meditation:
     XID: "} + req.xid + {"
     Varnish cache server
 "};
     return (deliver);
}
#
sub vcl_init {
    return (ok);
}
sub vcl_fini {
    return (ok);
}
Salin selepas log masuk

#建立Varnish用户以及用户组
useradd -s /sbin/nologin varnish

#将varnish配置文件和服务写入到系统：
cp /data/src/varnish-3.0.3/redhat/varnish.initrc /root/varnish
cp /data/src/varnish-3.0.3/redhat/varnish.sysconfig /etc/sysconfig/varnish
cp /data/src/varnish-3.0.3/redhat/varnish_reload_vcl /usr/local/varnish/bin/
#生成一个secret用于varnish 的 reload，这样以后修改了 /etc/varnish.conf,可以不用重启就可以重新载入新的配置了！
mkdir -p /etc/varnish/
uuidgen > /etc/varnish/secret
chmod 600 /etc/varnish/secret

mkdir -p /data/varnish/cache/

vi /etc/init.d/varnish

#! /bin/sh
. /etc/init.d/functions
retval=0
pidfile=/var/run/varnish.pid
exec="/usr/bin/varnishd"                                        #attention this...
reload_exec="/usr/local/varnish/bin/varnish_reload_vcl"         #attention this...
prog="varnishd"                                                                         #attention this...
config="/etc/sysconfig/varnish"                                 #attention this...
lockfile="/var/lock/subsys/varnish"
# Include varnish defaults
[ -e /etc/sysconfig/varnish ] && . /etc/sysconfig/varnish
start() {
        if [ ! -x $exec ]
        then
                echo $exec not found
                exit 5
        fi
        if [ ! -f $config ]
        then
                echo $config not found
                exit 6
        fi
        echo -n "Starting Varnish Cache: "
        # Open files (usually 1024, which is way too small for varnish)
        ulimit -n ${NFILES:-131072}
        # Varnish wants to lock shared memory log in memory.
        ulimit -l ${MEMLOCK:-82000}
        # $DAEMON_OPTS is set in /etc/sysconfig/varnish. At least, one
        # has to set up a backend, or /tmp will be used, which is a bad idea.
        if [ "$DAEMON_OPTS" = "" ]; then
                echo "\$DAEMON_OPTS empty."
                echo -n "Please put configuration options in $config"
                return 6
        else
                # Varnish always gives output on STDOUT
                daemon --pidfile $pidfile  $exec -P $pidfile "$DAEMON_OPTS" > /dev/null 2>&1
                retval=$?
                if [ $retval -eq 0 ]
                then
                        touch $lockfile
                        echo_success
                        echo
                else
                        echo_failure
                        echo
                fi
                return $retval
        fi
}
stop() {
        echo -n "Stopping Varnish Cache: "
        killproc -p $pidfile $prog
        retval=$?
        echo
        [ $retval -eq 0 ] && rm -f $lockfile
        return $retval
}
restart() {
        stop
        start
}
reload() {
        if [ "$RELOAD_VCL" = "1" ]
        then
                $reload_exec
        else
                force_reload
        fi
}
force_reload() {
        restart
}
rh_status() {
        status -p $pidfile $prog
}
rh_status_q() {
        rh_status >/dev/null 2>&1
}
configtest() {
    if [ -f "$VARNISH_VCL_CONF" ]; then
        $exec -f "$VARNISH_VCL_CONF" -C -n /tmp > /dev/null && echo "Syntax ok"
    else
        echo "VARNISH_VCL_CONF is  unset or does not point to a file"
    fi
}
# See how we were called.
case "$1" in
        start)
                rh_status_q && exit 0
                $1
                ;;
        stop)
                rh_status_q || exit 0
                $1
                ;;
        restart)
                $1
                ;;
        reload)
                rh_status_q || exit 7
                $1
                ;;
        force-reload)
                force_reload
                ;;
        status)
                rh_status
                ;;
        condrestart|try-restart)
                rh_status_q || exit 0
                restart
                ;;
        configtest)
                configtest
                ;;
        *)
        echo "Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload}"
        exit 2
esac
exit $?
Salin selepas log masuk

vi /etc/init.d/varnish

NFILES=131072
MEMLOCK=82000
RELOAD_VCL=1
VARNISH_VCL_CONF=/etc/varnish.conf   #attention this...
VARNISH_LISTEN_ADDRESS=0.0.0.0
VARNISH_LISTEN_PORT=80
VARNISH_ADMIN_LISTEN_ADDRESS=127.0.0.1
VARNISH_ADMIN_LISTEN_PORT=2000
VARNISH_SECRET_FILE=/etc/varnish/secret   #attention this...
VARNISH_MIN_THREADS=50
VARNISH_MAX_THREADS=1000
VARNISH_THREAD_TIMEOUT=120   #attention this...
VARNISH_STORAGE_FILE=/data/varnish/cache/varnish_cache.data   #attention this...
VARNISH_STORAGE_SIZE=1G
VARNISH_STORAGE="file,${VARNISH_STORAGE_FILE},${VARNISH_STORAGE_SIZE}"    #attention this...
#it can also be fixed as this: VARNISH_STORAGE="malloc,1G"
VARNISH_TTL=120
DAEMON_OPTS="-a ${VARNISH_LISTEN_ADDRESS}:${VARNISH_LISTEN_PORT} \
             -f ${VARNISH_VCL_CONF} \
             -T ${VARNISH_ADMIN_LISTEN_ADDRESS}:${VARNISH_ADMIN_LISTEN_PORT} \
             -t ${VARNISH_TTL} \
             -w ${VARNISH_MIN_THREADS},${VARNISH_MAX_THREADS},${VARNISH_THREAD_TIMEOUT} \
             -u varnish -g varnish \
             -S ${VARNISH_SECRET_FILE} \
             -s ${VARNISH_STORAGE}"
Salin selepas log masuk

chmod 755 /root/varnish
chmod 755 /usr/local/varnish/bin/varnish_reload_vcl

#可以用的命令：
/root/varnish {start|stop|status|restart|condrestart|try-restart|reload|force-reload}

#查看实时运行状况
varnishstat
#查看日志 方式一（varnish的特有方式）：
varnishlog
#查看日志 方式二（与nginx日志相似方式）：
varnishncsa
#清除缓存：
varnishadm -T 127.0.0.1:2000 -S /etc/varnish/secret ban.url ^/index.html
varnishadm -T 127.0.0.1:2000 -S /etc/varnish/secret ban.url ^.* #清除所有的
varnishadm -T 127.0.0.1:2000 -S /etc/varnish/secret ban.list
清除www.bbs.com域名下的/static/image/tt.jpg
varnishadm -T 127.0.0.1:2000 -S /etc/varnish/secret ban “req.http.host ~www.bbs.com$ && req.url ~ /static/image/tt.jpg”
varnishadm -T 127.0.0.1:2000 -S /etc/varnish/secret BAN “req.http.host ~www.aipinp.com$ && req.url ~ /index.html”

#优化Linux内核参数
vi /etc/sysctl.conf

net.ipv4.tcp_fin_timeout = 30
net.ipv4.tcp_keepalive_time = 300
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_tw_recycle = 1
net.ipv4.ip_local_port_range = 5000    65000
Salin selepas log masuk

原文地址：【原创】haproxy + varnish + nginx + fastCGi + mysql 搭建, 感谢原作者分享。

Label berkaitan：
haproxy nginx varnish 原创
sumber：php.cn
Artikel sebelumnya：linux centos5.8 安装memcached Artikel seterusnya：CentOS 6.4 安装Redis 2.6.13和phpRedis扩展
Kenyataan Laman Web ini
Kandungan artikel ini disumbangkan secara sukarela oleh netizen, dan hak cipta adalah milik pengarang asal. Laman web ini tidak memikul tanggungjawab undang-undang yang sepadan. Jika anda menemui sebarang kandungan yang disyaki plagiarisme atau pelanggaran, sila hubungi admin@php.cn
Artikel terbaru oleh pengarang
Isu terkini
Pertanyaan dan formula membentuk keseluruhan jadual, dengan lajur baharu, dengan lajur baharu ialah formula yang melibatkan nilai lajur bersyarat lain EDIT: Formula mestilah lajur "nilai" - lajur "nilai" dengan user_id te...
daripada 2024-04-06 21:23:40
0
2
530
Menggunakan Grid untuk Mencipta Reka Bentuk Khusus Ini: Panduan Langkah demi Langkah Saya cuba membuat reka letak yang serupa dengan imej ini, saya telah cuba menggunakan grid...
daripada 2024-04-06 20:29:08
0
2
492
Masalah yang dihadapi apabila menggunakan opentbs untuk menjana fail odt: nilai kunci yang sama dipaparkan dalam baris yang sama dan bukannya lajur yang berasingan. Saya menggunakan perpustakaan yang dipanggil OpenTbs untuk mencipta odt menggunakan PHP, s...
daripada 2024-04-06 20:18:18
0
1
483
Tidak dapat mendapatkan elemen input daripada tapak web Jadi saya cuba mendapatkan elemen input daripada Twitter tetapi apabila saya menjalankanny...
daripada 2024-04-06 18:59:57
0
1
442
Titik Scatterplot tidak mengekalkan nilai semasa mengezum masuk d3.js Ini adalah kali pertama saya menggunakan d3.js, jadi harap bersabar. Saya melaksanakannya ...
daripada 2024-04-06 18:16:26
0
1
403
Topik-topik yang berkaitan
Lagi>
Cadangan popular
Tutorial Popular
Lagi>
Tutorial berkaitan
Cadangan popular
Kursus terkini
Muat turun terkini
Lagi>
kesan web
Kod sumber laman web
Bahan laman web
Templat hujung hadapan
Tentang kita Penafian Sitemap
Laman web PHP Cina：Latihan PHP dalam talian kebajikan awam，Bantu pelajar PHP berkembang dengan cepat！