©
Dokumen ini menggunakan Manual laman web PHP Cina Lepaskan
(PHP 4, PHP 5)
snmprealwalk — 返回指定的所有对象,包括它们各自的对象 ID
$host
, string $community
, string $object_id
[, int $timeout
= 1000000
[, int $retries
= 5
]] )
The snmprealwalk() function is used to traverse over a number
of SNMP objects starting from object_id
and return not only their values but also their object ids.
host
The hostname of the SNMP agent (server).
community
The read community.
object_id
The SNMP object id which precedes the wanted one.
timeout
The number of microseconds until the first timeout.
retries
The number of times to retry if timeouts occur.
Returns an associative array of the SNMP object ids and their values on success or FALSE
on error.
In case of an error, an E_WARNING message is shown.
Example #1 Using snmprealwalk()
<?php
print_r ( snmprealwalk ( "localhost" , "public" , "IF-MIB::ifName" ));
?>
The above will output something like:
Array ( [IF-MIB::ifName.1] => STRING: lo [IF-MIB::ifName.2] => STRING: eth0 [IF-MIB::ifName.3] => STRING: eth2 [IF-MIB::ifName.4] => STRING: sit0 [IF-MIB::ifName.5] => STRING: sixxs )
[#1] aleksander dot sztramski at kpsi dot pl [2009-08-20 04:39:21]
If you wish to use version 2c or 3, use the following functions:
snmp v2c functions:
snmp2_get (string host, string community, string object_id [, int timeout [, int retries]])
snmp2_getnext (string host, string community, string object_id [, int timeout [, int retries]])
snmp2_walk (string host, string community, string object_id [, int timeout [, int retries]])
snmp2_real_walk (string host, string community, string object_id [, int timeout [, int retries]])
snmp2_set (string host, string community, string object_id, string type, mixed value [, int timeout [, int retries]])
snmp v3 functions:
snmp3_get (string host, string sec_name, string sec_level, string auth_protocol, string auth_passphrase, string priv_pr)
snmp3_getnext (string host, string sec_name, string sec_level, string auth_protocol, string auth_passphrase, string pri)
snmp3_walk (string host, string sec_name, string sec_level, string auth_protocol, string auth_passphrase, string priv_p)
snmp3_real_walk (string host, string sec_name, string sec_level, string auth_protocol, string auth_passphrase, string p)
snmp3_set (string host, string sec_name, string sec_level, string auth_protocol, string auth_passphrase, string priv_pr)
[#2] Anonymous [2008-05-21 10:19:37]
To check if there were any results found you have to use the empty() function. The count() function always returns a number 1 or larger.
$walk_result = snmprealwalk($machine_ip, $community, $snmpcodes['interface_names']);
if (empty($walk_result)) {
print "No network interfaces found.<br>\n";
exit(0);
}
[#3] scot at indievisible dot org [2006-08-09 12:10:51]
Some improvements based on testing a lot of OIDs on a lot of devices.
<?php
function snmptable($host, $community, $oid) {
// TODO: get original state and restore at bottom
snmp_set_oid_numeric_print(TRUE);
snmp_set_quick_print(TRUE);
snmp_set_enum_print(TRUE);
$retval = array();
$raw = snmprealwalk($host, $community, $oid);
if (count($raw) == 0) return ($retval); // no data
$prefix_length = 0;
$largest = 0;
foreach ($raw as $key => $value) {
if ($prefix_length == 0) {
// don't just use $oid's length since it may be non-numeric
$prefix_elements = count(explode('.',$oid));
$tmp = '.' . strtok($key, '.');
while ($prefix_elements > 1) {
$tmp .= '.' . strtok('.');
$prefix_elements--;
}
$tmp .= '.';
$prefix_length = strlen($tmp);
}
$key = substr($key, $prefix_length);
$index = explode('.', $key, 2);
isset($retval[$index[1]]) or $retval[$index[1]] = array();
if ($largest < $index[0]) $largest = $index[0];
$retval[$index[1]][$index[0]] = $value;
}
if (count($retval) == 0) return ($retval); // no data
// fill in holes and blanks the agent may "give" you
foreach($retval as $k => $x) {
for ($i = 1; $i <= $largest; $i++) {
if (! isset($retval[$k][$i])) {
$retval[$k][$i] = '';
}
}
ksort($retval[$k]);
}
return($retval);
}
?>
[#4] scot at indievisible dot org [2006-08-09 08:16:49]
Since PHP doesn't have a nice snmptable-like function... here is a quick-and-dirty hack that works for me. Works on complete and sparse tables. The example oids are for the route (complete) and interface (often sparse) tables.
<?php
$a = snmptable("10.1.1.1", "public", ".1.3.6.1.2.1.4.21") or die("error");
print_r($a);
$a = snmptable("10.1.1.1", "public", ".1.3.6.1.2.1.2.2") or die("error");
print_r($a);
function snmptable($host, $community, $oid) {
// TODO: get original state and restore at bottom
snmp_set_oid_numeric_print(TRUE);
snmp_set_quick_print(TRUE);
snmp_set_enum_print(TRUE);
$retval = array();
$raw = snmprealwalk($host, $community, $oid) or die("snmptable: unable to walk OID $oid");
$prefix_length = 0;
foreach ($raw as $key => $value) {
if ($prefix_length == 0) {
// don't just use $oid's length since it may be non-numeric
$prefix_elements = count(explode('.',$oid));
$tmp = '.' . strtok($key, '.');
while ($prefix_elements > 1) {
$tmp .= '.' . strtok('.');
$prefix_elements--;
}
$tmp .= '.';
$prefix_length = strlen($tmp);
}
$key = substr($key, $prefix_length);
$index = explode('.', $key, 2);
isset($retval[$index[1]]) or $retval[$index[1]] = array();
isset($firstrow) or $firstrow = $index[1];
$retval[$index[1]][$index[0]] = $value;
}
// check for holes in the table and fill them in
foreach ($retval[$firstrow] as $key => $tmp) {
foreach($retval as $check => $tmp2) {
if (! isset($retval[$check][$key])) {
$retval[$check][$key] = '';
}
}
}
return($retval);
}
?>
[#5] railson at amixsi dot com dot br [2006-05-30 10:52:43]
Attention: timeout is in microseconds (multiply by 1,000,000 for seconds)
[#6] Stephen Cope [2004-09-09 20:38:09]
Here's a way to find the uptime and number of users on a machine. (Note that uptime is the uptime of the snmpd daemon, which should be fairly close to the uptime for the host.)
<?php
$state = snmprealwalk($host, "public", ".1.3.6.1.2.1.25.1", 50, 1);
$uptime = ereg_replace("^.*\) ([0-9]+ .*):[0-9][0-9]\.[0-9]{2}.*$", "\\1", $state['host.hrSystem.hrSystemUptime.0']);
$users = (int)ereg_replace("Gauge32: ", "", $state['host.hrSystem.hrSystemNumUsers.0']);
printf('<div class="machine"><dt>%s</dt><dd>%s</dd>', $host, $desc);
printf('<dd>up %s</dd>', $uptime);
if ( $users ) printf('<dd>%d user%s</dd>', $users, ($users > 1) ? 's' : '');
printf('</div>');
?>
[#7] Lars Troen [2003-02-24 05:30:30]
snmprealwalk indexes the values using the oid instead of an integer. This is useful when you need data that is contained in the oid as well as the value.
Here's an example for retrieving and printing vlan info:
//
// I have collected the vlan identifiers earlier from the 3com mib and they are stored in the $vlan table.
//
for($n=0;$n<count($vlan);$n++){
print $vlan[$n][id]." ".$vlan[$n][name]."<br>\n";
$ifStackStatusTable=@snmprealwalk($switch, $community, ".1.3.6.1.2.1.31.1.2.1.3.".$vlan[$n][id]); // ifMIB.ifMIBObjects.ifStackTable.ifStackEntry.ifStackStatus
for(reset($ifStackStatusTable); $port = key($ifStackStatusTable); next($ifStackStatusTable)){
print "$port=$ifStackStatusTable[$port]<br>";
}