4 Basic Data Types and Interfaces
Contents
- 4.1 Syntax
- 4.2 Basic data types
- 4.3 Real number precision
- 4.4 Recognized color keyword names
- 4.5 Basic DOM interfaces
- 4.5.1 Interface SVGElement
- 4.5.2 Interface SVGAnimatedBoolean
- 4.5.3 Interface SVGAnimatedString
- 4.5.4 Interface SVGStringList
- 4.5.5 Interface SVGAnimatedEnumeration
- 4.5.6 Interface SVGAnimatedInteger
- 4.5.7 Interface SVGNumber
- 4.5.8 Interface SVGAnimatedNumber
- 4.5.9 Interface SVGNumberList
- 4.5.10 Interface SVGAnimatedNumberList
- 4.5.11 Interface SVGLength
- 4.5.12 Interface SVGAnimatedLength
- 4.5.13 Interface SVGLengthList
- 4.5.14 Interface SVGAnimatedLengthList
- 4.5.15 Interface SVGAngle
- 4.5.16 Interface SVGAnimatedAngle
- 4.5.17 Interface SVGColor
- 4.5.18 Interface SVGICCColor
- 4.5.19 Interface SVGRect
- 4.5.20 Interface SVGAnimatedRect
- 4.5.21 Interface SVGUnitTypes
- 4.5.22 Interface SVGStylable
- 4.5.23 Interface SVGLocatable
- 4.5.24 Interface SVGTransformable
- 4.5.25 Interface SVGTests
- 4.5.26 Interface SVGLangSpace
- 4.5.27 Interface SVGExternalResourcesRequired
- 4.5.28 Interface SVGFitToViewBox
- 4.5.29 Interface SVGZoomAndPan
- 4.5.30 Interface SVGViewSpec
- 4.5.31 Interface SVGURIReference
- 4.5.32 Interface SVGCSSRule
- 4.5.33 Interface SVGRenderingIntent
4.1 Syntax
The EBNF grammar is as used in the XML specification,
with the addition of ~, a case-insensitive literal: characters in the ASCII range (only) are declared to be case-insensitive. For example, ~"Hello" will match (H|h)(e|e)(l|L)(l|L)(o|O). This makes the productions much easier to read.
? |
optional, zero or one |
+ |
one or more |
* |
zero or more |
| |
alternation |
"string" |
literal |
~"string" |
case-insensitive literal |
[] |
a character range |
[^] |
excluded character range |
() |
grouping |
4.2 Basic data types
This section defines a number of common data types used in the definitions
of SVG properties and attributes. Some data types that are not referenced by
multiple properties and attributes are defined inline in subsequent chapters.
Note that, as noted below, the specification of some types is different for CSS property values in style sheets (in the ‘style’ attribute,
‘style’ element or an external style sheet) than it is for for XML attribute values (including presentation attributes). This is due to restrictions in the CSS grammar. For example, scientific notation is allowed in attributes, including presentation attributes, but not in style sheets.
- <angle>
-
Angles are specified in one of two ways depending upon whether
they are used in CSS property syntax or SVG presentation attribute
syntax:
-
When an <angle> is used in a style sheet or with a
property in a ‘style’ attribute, the
syntax must match the following pattern:
angle ::= number (~"deg" | ~"grad" | ~"rad")?
where deg indicates degrees,
grad indicates grads and
rad indicates radians.
The unit identifier may be in lower (recommended) or upper case.
For properties defined in CSS2
[CSS2],
an angle unit identifier must be provided (for non-zero
values). For SVG-specific properties the angle unit
identifier is optional. If a unit is not provided, the angle
value is assumed to be in degrees.
-
When an <angle> is used in an SVG presentation attribute,
the syntax must match the following pattern:
angle ::= number ("deg" | "grad" | "rad")?
The unit identifier, if present, must be in lower case; if
not present, the angle value is assumed to be in degrees.
In the SVG DOM, <angle> values are represented using
SVGAngle or SVGAnimatedAngle objects.
- <anything>
-
The basic type <anything> is a sequence of zero or more characters.
Specifically:
anything ::= Char*
where Char is the
production for a character, as defined in XML 1.0
([XML10], section 2.2).
- <color>
-
The basic type <color> is a CSS2 compatible specification for a
color in the sRGB color space [SRGB].
<color> applies to SVG's use of the ‘color’ property and
is a component of the definitions of properties ‘fill’,
‘stroke’, ‘stop-color’, ‘flood-color’ and
‘lighting-color’, which also offer optional ICC-based color
specifications.
SVG supports all of the syntax alternatives for <color> defined in
CSS2
syntax and basic data types ([CSS2],
section 4.3.6), with the exception that SVG allows an expanded list of
recognized color keywords names.
A <color> is either a keyword (see
Recognized color keyword names) or a
numerical RGB specification.
In addition to these color keywords, users may specify
keywords that correspond to the colors used by objects in the
user's environment. The normative definition of these
keywords is found in
User preferences
for colors ([CSS2], section 18.2).
The format of an RGB value in hexadecimal notation is a "#"
immediately followed by either three or six hexadecimal
characters. The three-digit RGB notation (#rgb) is converted
into six-digit form (#rrggbb) by replicating digits, not by
adding zeros. For example, #fb0
expands to #ffbb00. This
ensures that white (#ffffff) can be
specified with the short notation (#fff)
and removes any dependencies on the color depth of the display.
The format of an RGB value in the
functional notation is an RGB start-function followed by a comma-separated
list of three numerical values (either three integer values
or three percentage values) followed by ")".
An RGB start-function is the case-insensitive string "rgb(", for example "RGB(" or "rGb(".
For compatibility, the all-lowercase form "rgb(" is preferred.
The integer
value 255 corresponds to 100%, and to F or FF in the
hexadecimal notation: rgb(255,255,255)
= rgb(100%,100%,100%)
= #FFF. White space characters are allowed
around the numerical values. All RGB colors are specified in the sRGB
color space [SRGB]. Using
sRGB provides an unambiguous and objectively measurable definition
of the color, which can be related to international standards
(see [COLORIMETRY]).
color ::= "#" hexdigit hexdigit hexdigit (hexdigit hexdigit hexdigit)?
| "rgb(" wsp* integer comma integer comma integer wsp* ")"
| "rgb(" wsp* integer "%" comma integer "%" comma integer "%" wsp* ")"
| color-keyword
hexdigit ::= [0-9A-Fa-f]
comma ::= wsp* "," wsp*
where color-keyword matches (case insensitively) one of the
color keywords listed in Recognized color keyword names
below, or one of the system color keywords listed in
User preferences
for colors ([CSS2], section 18.2).
The corresponding SVG DOM interface definitions for
<color> are defined in
Document Object Model CSS;
in particular, see RGBColor
([DOM2STYLE], section 2.2).
SVG's extension to color, including the ability to specify ICC-based colors,
are represented using DOM interface SVGColor.
- <coordinate>
-
A <coordinate> is a length in the user coordinate system that is
the given distance from the origin of the user coordinate system along the
relevant axis (the x-axis for X coordinates, the y-axis for Y
coordinates). Its syntax is the same as that for
<length>.
coordinate ::= length
Within the SVG DOM, a <coordinate> is represented as
an SVGLength or an SVGAnimatedLength.
- <frequency>
-
Frequency values are used with aural properties. As defined in
CSS2, a frequency value is a <number> immediately followed
by a frequency unit identifier. The frequency unit identifiers
are:
-
Hz: Hertz
-
kHz: kilo Hertz
Frequency values may not be negative.
In the SVG DOM, <frequency> values are represented
using the CSSPrimitiveValue
interface defined in Document Object Model CSS
([DOM2STYLE], section 2.2).
- <FuncIRI>
- Functional notation for an IRI: "url(" <IRI> ")".
- <icccolor>
-
An <icccolor> is an ICC color specification. In SVG 1.1,
an ICC color specification is given by a name, which references
a ‘color-profile’ element, and one or more color component
values. The grammar is as follows:
icccolor ::= "icc-color(" name (comma-wsp number)+ ")"
name ::= [^,()#x20#x9#xD#xA] /* any char except ",", "(", ")" or wsp */
The corresponding SVG DOM interface for <icccolor> is
SVGICCColor.
- <integer>
-
An <integer> is specified as an optional sign character ("+" or
"-") followed by one or more digits "0" to "9":
integer ::= [+-]? [0-9]+
If the sign character is not present, the number is non-negative.
Unless stated otherwise for a particular attribute or
property, the range for an <integer> encompasses (at a
minimum) -2147483648 to 2147483647.
Within the SVG DOM, an <integer> is represented as a
long or an
SVGAnimatedInteger.
- <IRI>
-
An Internationalized Resource Identifier (see IRI).
For the specification of IRI references in SVG, see
IRI references.
- <length>
-
A length is a distance measurement, given as a number along with a unit
which may be optional. Lengths are specified in one of two ways depending
upon whether they are used in CSS property syntax or SVG
presentation attribute syntax:
-
When a <length> is used in a style sheet or with a
property in a ‘style’ attribute, the
syntax must match the following pattern:
length ::= number (~"em" | ~"ex" | ~"px" | ~"in" | ~"cm" | ~"mm" | ~"pt" | ~"pc")?
See
the CSS2 specification for the meanings of the unit
identifiers. The unit identifier may be in lower (recommended)
or upper case.
For properties defined in CSS2
[CSS2],
a length unit identifier must be provided (for non-zero values).
For SVG-specific properties, the length unit identifier
is optional. If a unit is not provided, the length value
represents a distance in the current user coordinate system.
-
When a <length> is used in an SVG presentation attribute,
the syntax must match the following pattern:
length ::= number ("em" | "ex" | "px" | "in" | "cm" | "mm" | "pt" | "pc" | "%")?
The unit identifier, if present, must be in lower case; if
not present, the length value represents a distance in the
current user coordinate system.
Note that the non-property <length> definition also
allows a percentage unit identifier. The meaning of a
percentage length value depends on the attribute for which the
percentage length value has been specified. Two common cases
are: (a) when a percentage length value represents a percentage
of the viewport width or height (refer to the section that discusses units in
general), and (b) when a percentage length value represents
a percentage of the bounding box width or height on a given
object (refer to the
section that describes object bounding box units).
In the SVG DOM, <length> values are represented using
SVGLength or SVGAnimatedLength objects.
- <list-of-family-names>
-
A <list-of-family-names> is a list of font family names using the same syntax
as the ‘font-family’
property, excluding the <generic-family> and 'inherit'
values.
- <list-of-strings>
-
A <list-of-strings> consists of a separated sequence of <string>s.
String lists are white space-separated, where white space is defined as one or more of the
following consecutive characters: "space" (U+0020), "tab" (U+0009), "line feed" (U+000A) and
"carriage return" (U+000D).
The following is an EBNF grammar describing the <list-of-strings>
syntax:
list-of-strings ::= string
| string wsp list-of-strings
string ::= [^#x9#xA#xD#x20]*
wsp ::= [#x9#xA#xD#x20]+
-
<list-of-Ts>
-
(Where T is a type other than
<string> and
<family-name>.)
A list consists of a
separated sequence of values. Unless explicitly described
differently, lists within SVG's XML attributes can be either
comma-separated, with optional white space before or after the comma,
or white space-separated.
White space in lists is defined as one or more of the
following consecutive characters: "space" (U+0020), "tab" (U+0009),
"line feed" (U+000A), "carriage return" (U+000D)
and "form-feed" (U+000C).
The following is a template for an EBNF grammar describing the
<list-of-Ts> syntax:
list-of-Ts ::= T
| T comma-wsp list-of-Ts
comma-wsp ::= (wsp+ ","? wsp*) | ("," wsp*)
wsp ::= (#x20 | #x9 | #xD | #xA)
Within the SVG DOM, values of a <list-of-Ts>
type are represented by an interface specific for the
particular type T. For example, a <list-of-lengths>
is represented in the SVG DOM using an SVGLengthList
or SVGAnimatedLengthList object.
- <name>
-
A name, which is a string where a few characters of syntactic significance are disallowed.
name ::= [^,()#x20#x9#xD#xA] /* any char except ",", "(", ")" or wsp */
- <number>
-
Real numbers are specified in one of two ways. When used in a style sheet,
a <number> is defined as follows:
number ::= integer
| [+-]? [0-9]* "." [0-9]+
This syntax is the same as the definition in CSS
([CSS2], section 4.3.1).
When used in an SVG attribute,
a <number> is defined differently, to allow numbers with large magnitudes
to be specified more concisely:
number ::= integer ([Ee] integer)?
| [+-]? [0-9]* "." [0-9]+ ([Ee] integer)?
Within the SVG DOM, a <number> is represented as a
float, SVGNumber or a
SVGAnimatedNumber.
- <number-optional-number>
-
A pair of <number>s, where the second
<number> is optional.
number-optional-number ::= number
| number comma-wsp number
In the SVG DOM, a <number-optional-number> is represented
using a pair of SVGAnimatedInteger or SVGAnimatedNumber
objects.
- <paint>
-
The values for properties ‘fill’ and ‘stroke’
are specifications of the type of paint to use when filling or stroking
a given graphics element. The available options and syntax for
<paint> are described in
Specifying paint.
Within the SVG DOM, <paint> values are represented using
SVGPaint objects.
- <percentage>
-
Percentages are specified as a number followed by a "%" character:
percentage ::= number "%"
Note that the definition of <number> depends
on whether the percentage is specified in a style sheet or in an
attribute that is not also a presentation attribute.
Percentage values are always relative to another value, for example a
length. Each attribute or property that allows percentages also
defines the reference distance measurement to which the percentage
refers.
Within the SVG DOM, a <percentage> is
represented using an SVGNumber or SVGAnimatedNumber
object.
- <time>
-
A time value is a <number> immediately followed by a time unit
identifier. The time unit identifiers are:
-
ms: milliseconds
-
s: seconds
In the SVG DOM, <time> values are represented
using the CSSPrimitiveValue
interface defined in Document Object Model CSS
([DOM2STYLE], section 2.2).
- <transform-list>
-
A <transform-list> is used to specify a list of coordinate system
transformations. A detailed description of the possible values for a
<transform-list> is given in
Modifying the User Coordinate
System: the transform attribute.
Within the SVG DOM, a <transform-list> value is represented using
an SVGTransformList or SVGAnimatedTransformList
object.
- <XML-Name>
-
An XML name, as defined by the
Name
production in
Extensible Markup Language (XML) 1.0 ([XML10], section 2.3).
4.3 Real number precision
Unless stated otherwise for a particular attribute or property, a
<number> has the capacity
for at least a single-precision floating point number and has a range (at a
minimum) of -3.4e+38F to +3.4e+38F.
It is recommended that higher precision floating point
storage and computation be performed on operations such as
coordinate system transformations to provide the best
possible precision and to prevent round-off errors.
Conforming
High-Quality SVG Viewers are required to use at least double-precision
floating point for intermediate calculations on certain numerical operations.
4.4 Recognized color keyword names
The following is the list of recognized color keywords that
can be used as a keyword value for data type <color>:
|
aliceblue |
rgb(240, 248, 255) |
|
antiquewhite |
rgb(250, 235, 215) |
|
aqua |
rgb( 0, 255, 255) |
|
aquamarine |
rgb(127, 255, 212) |
|
azure |
rgb(240, 255, 255) |
|
beige |
rgb(245, 245, 220) |
|
bisque |
rgb(255, 228, 196) |
|
black |
rgb( 0, 0, 0) |
|
blanchedalmond |
rgb(255, 235, 205) |
|
blue |
rgb( 0, 0, 255) |
|
blueviolet |
rgb(138, 43, 226) |
|
brown |
rgb(165, 42, 42) |
|
burlywood |
rgb(222, 184, 135) |
|
cadetblue |
rgb( 95, 158, 160) |
|
chartreuse |
rgb(127, 255, 0) |
|
chocolate |
rgb(210, 105, 30) |
|
coral |
rgb(255, 127, 80) |
|
cornflowerblue |
rgb(100, 149, 237) |
|
cornsilk |
rgb(255, 248, 220) |
|
crimson |
rgb(220, 20, 60) |
|
cyan |
rgb( 0, 255, 255) |
|
darkblue |
rgb( 0, 0, 139) |
|
darkcyan |
rgb( 0, 139, 139) |
|
darkgoldenrod |
rgb(184, 134, 11) |
|
darkgray |
rgb(169, 169, 169) |
|
darkgreen |
rgb( 0, 100, 0) |
|
darkgrey |
rgb(169, 169, 169) |
|
darkkhaki |
rgb(189, 183, 107) |
|
darkmagenta |
rgb(139, 0, 139) |
|
darkolivegreen |
rgb( 85, 107, 47) |
|
darkorange |
rgb(255, 140, 0) |
|
darkorchid |
rgb(153, 50, 204) |
|
darkred |
rgb(139, 0, 0) |
|
darksalmon |
rgb(233, 150, 122) |
|
darkseagreen |
rgb(143, 188, 143) |
|
darkslateblue |
rgb( 72, 61, 139) |
|
darkslategray |
rgb( 47, 79, 79) |
|
darkslategrey |
rgb( 47, 79, 79) |
|
darkturquoise |
rgb( 0, 206, 209) |
|
darkviolet |
rgb(148, 0, 211) |
|
deeppink |
rgb(255, 20, 147) |
|
deepskyblue |
rgb( 0, 191, 255) |
|
dimgray |
rgb(105, 105, 105) |
|
dimgrey |
rgb(105, 105, 105) |
|
dodgerblue |
rgb( 30, 144, 255) |
|
firebrick |
rgb(178, 34, 34) |
|
floralwhite |
rgb(255, 250, 240) |
|
forestgreen |
rgb( 34, 139, 34) |
|
fuchsia |
rgb(255, 0, 255) |
|
gainsboro |
rgb(220, 220, 220) |
|
ghostwhite |
rgb(248, 248, 255) |
|
gold |
rgb(255, 215, 0) |
|
goldenrod |
rgb(218, 165, 32) |
|
gray |
rgb(128, 128, 128) |
|
grey |
rgb(128, 128, 128) |
|
green |
rgb( 0, 128, 0) |
|
greenyellow |
rgb(173, 255, 47) |
|
honeydew |
rgb(240, 255, 240) |
|
hotpink |
rgb(255, 105, 180) |
|
indianred |
rgb(205, 92, 92) |
|
indigo |
rgb( 75, 0, 130) |
|
ivory |
rgb(255, 255, 240) |
|
khaki |
rgb(240, 230, 140) |
|
lavender |
rgb(230, 230, 250) |
|
lavenderblush |
rgb(255, 240, 245) |
|
lawngreen |
rgb(124, 252, 0) |
|
lemonchiffon |
rgb(255, 250, 205) |
|
lightblue |
rgb(173, 216, 230) |
|
lightcoral |
rgb(240, 128, 128) |
|
lightcyan |
rgb(224, 255, 255) |
|
lightgoldenrodyellow |
rgb(250, 250, 210) |
|
lightgray |
rgb(211, 211, 211) |
|
lightgreen |
rgb(144, 238, 144) |
|
lightgrey |
rgb(211, 211, 211) |
|
|
|
lightpink |
rgb(255, 182, 193) |
|
lightsalmon |
rgb(255, 160, 122) |
|
lightseagreen |
rgb( 32, 178, 170) |
|
lightskyblue |
rgb(135, 206, 250) |
|
lightslategray |
rgb(119, 136, 153) |
|
lightslategrey |
rgb(119, 136, 153) |
|
lightsteelblue |
rgb(176, 196, 222) |
|
lightyellow |
rgb(255, 255, 224) |
|
lime |
rgb( 0, 255, 0) |
|
limegreen |
rgb( 50, 205, 50) |
|
linen |
rgb(250, 240, 230) |
|
magenta |
rgb(255, 0, 255) |
|
maroon |
rgb(128, 0, 0) |
|
mediumaquamarine |
rgb(102, 205, 170) |
|
mediumblue |
rgb( 0, 0, 205) |
|
mediumorchid |
rgb(186, 85, 211) |
|
mediumpurple |
rgb(147, 112, 219) |
|
mediumseagreen |
rgb( 60, 179, 113) |
|
mediumslateblue |
rgb(123, 104, 238) |
|
mediumspringgreen |
rgb( 0, 250, 154) |
|
mediumturquoise |
rgb( 72, 209, 204) |
|
mediumvioletred |
rgb(199, 21, 133) |
|
midnightblue |
rgb( 25, 25, 112) |
|
mintcream |
rgb(245, 255, 250) |
|
mistyrose |
rgb(255, 228, 225) |
|
moccasin |
rgb(255, 228, 181) |
|
navajowhite |
rgb(255, 222, 173) |
|
navy |
rgb( 0, 0, 128) |
|
oldlace |
rgb(253, 245, 230) |
|
olive |
rgb(128, 128, 0) |
|
olivedrab |
rgb(107, 142, 35) |
|
orange |
rgb(255, 165, 0) |
|
orangered |
rgb(255, 69, 0) |
|
orchid |
rgb(218, 112, 214) |
|
palegoldenrod |
rgb(238, 232, 170) |
|
palegreen |
rgb(152, 251, 152) |
|
paleturquoise |
rgb(175, 238, 238) |
|
palevioletred |
rgb(219, 112, 147) |
|
papayawhip |
rgb(255, 239, 213) |
|
peachpuff |
rgb(255, 218, 185) |
|
peru |
rgb(205, 133, 63) |
|
pink |
rgb(255, 192, 203) |
|
plum |
rgb(221, 160, 221) |
|
powderblue |
rgb(176, 224, 230) |
|
purple |
rgb(128, 0, 128) |
|
red |
rgb(255, 0, 0) |
|
rosybrown |
rgb(188, 143, 143) |
|
royalblue |
rgb( 65, 105, 225) |
|
saddlebrown |
rgb(139, 69, 19) |
|
salmon |
rgb(250, 128, 114) |
|
sandybrown |
rgb(244, 164, 96) |
|
seagreen |
rgb( 46, 139, 87) |
|
seashell |
rgb(255, 245, 238) |
|
sienna |
rgb(160, 82, 45) |
|
silver |
rgb(192, 192, 192) |
|
skyblue |
rgb(135, 206, 235) |
|
slateblue |
rgb(106, 90, 205) |
|
slategray |
rgb(112, 128, 144) |
|
slategrey |
rgb(112, 128, 144) |
|
snow |
rgb(255, 250, 250) |
|
springgreen |
rgb( 0, 255, 127) |
|
steelblue |
rgb( 70, 130, 180) |
|
tan |
rgb(210, 180, 140) |
|
teal |
rgb( 0, 128, 128) |
|
thistle |
rgb(216, 191, 216) |
|
tomato |
rgb(255, 99, 71) |
|
turquoise |
rgb( 64, 224, 208) |
|
violet |
rgb(238, 130, 238) |
|
wheat |
rgb(245, 222, 179) |
|
white |
rgb(255, 255, 255) |
|
whitesmoke |
rgb(245, 245, 245) |
|
yellow |
rgb(255, 255, 0) |
|
yellowgreen |
rgb(154, 205, 50) |
|
|
|
|
4.5 Basic DOM interfaces
4.5.1 Interface SVGElement
All of the SVG DOM interfaces that correspond directly to elements in the
SVG language (such as the SVGPathElement interface for the
‘path’ element) derive from the SVGElement interface.
interface SVGElement : Element {
attribute DOMString id setraises(DOMException);
attribute DOMString xmlbase setraises(DOMException);
readonly attribute SVGSVGElement ownerSVGElement;
readonly attribute SVGElement viewportElement;
};
-
id (DOMString)
-
The value of the ‘id’ attribute on the given element, or the
empty string if ‘id’ is not present.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised on an attempt
to change the value of a read only attribute.
-
xmlbase (DOMString)
-
Corresponds to attribute ‘xml:base’ on the given element.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised on an attempt
to change the value of a read only attribute.
-
ownerSVGElement (readonly SVGSVGElement)
The nearest ancestor ‘svg’ element. Null if the given element is
the outermost svg element.
-
viewportElement (readonly SVGElement)
The element which established the current viewport. Often, the nearest
ancestor ‘svg’ element. Null if the given element is the
outermost svg element.
4.5.2 Interface SVGAnimatedBoolean
Used for attributes of type boolean which can be animated.
interface SVGAnimatedBoolean {
attribute boolean baseVal setraises(DOMException);
readonly attribute boolean animVal;
};
-
baseVal (boolean)
-
The base value of the given attribute before applying any animations.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised on an
attempt to change the value of a read only attribute.
-
animVal (readonly boolean)
If the given attribute or property is being animated, contains the
current animated value of the attribute or property. If the given
attribute or property is not currently being animated, contains the
same value as baseVal.
4.5.3 Interface SVGAnimatedString
Used for attributes of type DOMString which can be animated.
interface SVGAnimatedString {
attribute DOMString baseVal setraises(DOMException);
readonly attribute DOMString animVal;
};
-
baseVal (DOMString)
-
The base value of the given attribute before applying any animations.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised on an
attempt to change the value of a read only attribute.
-
animVal (readonly DOMString)
If the given attribute or property is being animated, contains the
current animated value of the attribute or property. If the given
attribute or property is not currently being animated, contains the
same value as baseVal.
4.5.4 Interface SVGStringList
This interface defines a list of DOMString values.
SVGStringList has the same attributes and methods as other
SVGxxxList interfaces. Implementers may consider using a single base class
to implement the various SVGxxxList interfaces.
interface SVGStringList {
readonly attribute unsigned long numberOfItems;
void clear() raises(DOMException);
DOMString initialize(in DOMString newItem) raises(DOMException);
DOMString getItem(in unsigned long index) raises(DOMException);
DOMString insertItemBefore(in DOMString newItem, in unsigned long index) raises(DOMException);
DOMString replaceItem(in DOMString newItem, in unsigned long index) raises(DOMException);
DOMString removeItem(in unsigned long index) raises(DOMException);
DOMString appendItem(in DOMString newItem) raises(DOMException);
};
-
numberOfItems (readonly unsigned long)
The number of items in the list.
- void clear()
-
Clears all existing current items from the list, with the result being
an empty list.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the list
cannot be modified.
- DOMString initialize(in DOMString newItem)
-
Clears all existing current items from the list and re-initializes the
list to hold the single item specified by the parameter.
-
DOMString newItem
The item which should become the only member of the list.
The item being inserted into the list.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the list
cannot be modified.
- DOMString getItem(in unsigned long index)
-
Returns the specified item from the list.
-
unsigned long index
The index of the item from the list which is to be
returned. The first item is number 0.
The selected item.
- DOMException, code INDEX_SIZE_ERR
- Raised if the index number is
greater than or equal to numberOfItems.
- DOMString insertItemBefore(in DOMString newItem, in unsigned long index)
-
Inserts a new item into the list at the specified position. The first
item is number 0.
-
DOMString newItem
The item which is to be inserted into the list.
-
unsigned long index
The index of the item before which the new item is to be
inserted. The first item is number 0. If the index is equal to 0,
then the new item is inserted at the front of the list. If the index
is greater than or equal to numberOfItems, then the new item is
appended to the end of the list.
The inserted item.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the list
cannot be modified.
- DOMString replaceItem(in DOMString newItem, in unsigned long index)
-
Replaces an existing item in the list with a new item.
-
DOMString newItem
The item which is to be inserted into the list.
-
unsigned long index
The index of the item which is to be replaced. The first
item is number 0.
The inserted item.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the list
cannot be modified.
- DOMException, code INDEX_SIZE_ERR
- Raised if the index number is
greater than or equal to numberOfItems.
- DOMString removeItem(in unsigned long index)
-
Removes an existing item from the list.
-
unsigned long index
The index of the item which is to be removed. The first
item is number 0.
The removed item.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the list
cannot be modified.
- DOMException, code INDEX_SIZE_ERR
- Raised if the index number is
greater than or equal to numberOfItems.
- DOMString appendItem(in DOMString newItem)
-
Inserts a new item at the end of the list.
-
DOMString newItem
The item which is to be inserted. The first item is
number 0.
The inserted item.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the list
cannot be modified.
4.5.5 Interface SVGAnimatedEnumeration
Used for attributes whose value must be a constant from a particular
enumeration and which can be animated.
interface SVGAnimatedEnumeration {
attribute unsigned short baseVal setraises(DOMException);
readonly attribute unsigned short animVal;
};
-
baseVal (unsigned short)
-
The base value of the given attribute before applying any animations.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised on an
attempt to change the value of a read only attribute.
-
animVal (readonly unsigned short)
If the given attribute or property is being animated, contains the
current animated value of the attribute or property. If the given
attribute or property is not currently being animated, contains the
same value as baseVal.
4.5.6 Interface SVGAnimatedInteger
Used for attributes of basic type
<integer> which can be
animated.
interface SVGAnimatedInteger {
attribute long baseVal setraises(DOMException);
readonly attribute long animVal;
};
-
baseVal (long)
-
The base value of the given attribute before applying any animations.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised on an
attempt to change the value of a read only attribute.
-
animVal (readonly long)
If the given attribute or property is being animated, contains the
current animated value of the attribute or property. If the given
attribute or property is not currently being animated, contains the
same value as baseVal.
4.5.7 Interface SVGNumber
Used for attributes of basic type
<number>.
interface SVGNumber {
attribute float value setraises(DOMException);
};
-
value (float)
-
The value of the given attribute.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised on an
attempt to change the value of a read only attribute.
4.5.8 Interface SVGAnimatedNumber
Used for attributes of basic type
<number> which can be
animated.
interface SVGAnimatedNumber {
attribute float baseVal setraises(DOMException);
readonly attribute float animVal;
};
-
baseVal (float)
-
The base value of the given attribute before applying any animations.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised on an
attempt to change the value of a read only attribute.
-
animVal (readonly float)
If the given attribute or property is being animated, contains the
current animated value of the attribute or property. If the given
attribute or property is not currently being animated, contains the
same value as baseVal.
4.5.9 Interface SVGNumberList
This interface defines a list of SVGNumber objects.
SVGNumberList has the same attributes and methods as other
SVGxxxList interfaces. Implementers may consider using a single base class
to implement the various SVGxxxList interfaces.
An SVGNumberList object can be designated as read only,
which means that attempts to modify the object will result in an exception
being thrown, as described below.
interface SVGNumberList {
readonly attribute unsigned long numberOfItems;
void clear() raises(DOMException);
SVGNumber initialize(in SVGNumber newItem) raises(DOMException);
SVGNumber getItem(in unsigned long index) raises(DOMException);
SVGNumber insertItemBefore(in SVGNumber newItem, in unsigned long index) raises(DOMException);
SVGNumber replaceItem(in SVGNumber newItem, in unsigned long index) raises(DOMException);
SVGNumber removeItem(in unsigned long index) raises(DOMException);
SVGNumber appendItem(in SVGNumber newItem) raises(DOMException);
};
-
numberOfItems (readonly unsigned long)
The number of items in the list.
- void clear()
-
Clears all existing current items from the list, with the result being
an empty list.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the list
corresponds to a read only attribute or when the object itself is
read only.
- SVGNumber initialize(in SVGNumber newItem)
-
Clears all existing current items from the list and re-initializes the
list to hold the single item specified by the parameter. If the inserted
item is already in a list, it is removed from its previous list before
it is inserted into this list. The inserted item is the item itself and
not a copy.
-
SVGNumber newItem
The item which should become the only member of the list.
The item being inserted into the list.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the list
corresponds to a read only attribute or when the object itself is
read only.
- SVGNumber getItem(in unsigned long index)
-
Returns the specified item from the list. The returned item is the
item itself and not a copy. Any changes made to the item are
immediately reflected in the list.
-
unsigned long index
The index of the item from the list which is to be
returned. The first item is number 0.
The selected item.
- DOMException, code INDEX_SIZE_ERR
- Raised if the index number is
greater than or equal to numberOfItems.
- SVGNumber insertItemBefore(in SVGNumber newItem, in unsigned long index)
-
Inserts a new item into the list at the specified position. The first
item is number 0. If newItem is already in a list, it is
removed from its previous list before it is inserted into this list.
The inserted item is the item itself and not a copy. If the item is
already in this list, note that the index of the item to insert
before is before the removal of the item.
-
SVGNumber newItem
The item which is to be inserted into the list.
-
unsigned long index
The index of the item before which the new item is to be
inserted. The first item is number 0. If the index is equal to 0,
then the new item is inserted at the front of the list. If the index
is greater than or equal to numberOfItems, then the new item is
appended to the end of the list.
The inserted item.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the list
corresponds to a read only attribute or when the object itself is
read only.
- SVGNumber replaceItem(in SVGNumber newItem, in unsigned long index)
-
Replaces an existing item in the list with a new item. If
newItem is already in a list, it is removed from its
previous list before it is inserted into this list. The inserted item
is the item itself and not a copy. If the item is already in this
list, note that the index of the item to replace is before
the removal of the item.
-
SVGNumber newItem
The item which is to be inserted into the list.
-
unsigned long index
The index of the item which is to be replaced. The first
item is number 0.
The inserted item.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the list
corresponds to a read only attribute or when the object itself is
read only.
- DOMException, code INDEX_SIZE_ERR
- Raised if the index number is
greater than or equal to numberOfItems.
- SVGNumber removeItem(in unsigned long index)
-
Removes an existing item from the list.
-
unsigned long index
The index of the item which is to be removed. The first
item is number 0.
The removed item.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the list
cannot be modified.
- DOMException, code INDEX_SIZE_ERR
- Raised if the index number is
greater than or equal to numberOfItems.
- SVGNumber appendItem(in SVGNumber newItem)
-
Inserts a new item at the end of the list. If newItem is
already in a list, it is removed from its previous list before it is
inserted into this list. The inserted item is the item itself and
not a copy.
-
SVGNumber newItem
The item which is to be inserted. The first item is
number 0.
The inserted item.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the list
cannot be modified.
4.5.10 Interface SVGAnimatedNumberList
Used for attributes which take a list of numbers and which can be animated.
interface SVGAnimatedNumberList {
readonly attribute SVGNumberList baseVal;
readonly attribute SVGNumberList animVal;
};
-
baseVal (readonly SVGNumberList)
The base value of the given attribute before applying any animations.
-
animVal (readonly SVGNumberList)
A read only SVGNumberList representing the current animated value of
the given attribute. If the given attribute is not currently being
animated, then the SVGNumberList will have the same contents
as baseVal. The object referenced by animVal will always
be distinct from the one referenced by baseVal, even when
the attribute is not animated.
4.5.11 Interface SVGLength
The SVGLength interface corresponds to the
<length> basic data type.
An SVGLength object can be designated as read only,
which means that attempts to modify the object will result in an exception
being thrown, as described below.
interface SVGLength {
// Length Unit Types
const unsigned short SVG_LENGTHTYPE_UNKNOWN = 0;
const unsigned short SVG_LENGTHTYPE_NUMBER = 1;
const unsigned short SVG_LENGTHTYPE_PERCENTAGE = 2;
const unsigned short SVG_LENGTHTYPE_EMS = 3;
const unsigned short SVG_LENGTHTYPE_EXS = 4;
const unsigned short SVG_LENGTHTYPE_PX = 5;
const unsigned short SVG_LENGTHTYPE_CM = 6;
const unsigned short SVG_LENGTHTYPE_MM = 7;
const unsigned short SVG_LENGTHTYPE_IN = 8;
const unsigned short SVG_LENGTHTYPE_PT = 9;
const unsigned short SVG_LENGTHTYPE_PC = 10;
readonly attribute unsigned short unitType;
attribute float value setraises(DOMException);
attribute float valueInSpecifiedUnits setraises(DOMException);
attribute DOMString valueAsString setraises(DOMException);
void newValueSpecifiedUnits(in unsigned short unitType, in float valueInSpecifiedUnits) raises(DOMException);
void convertToSpecifiedUnits(in unsigned short unitType) raises(DOMException);
};
-
SVG_LENGTHTYPE_UNKNOWN (unsigned short)
The unit type is not one of predefined unit types. It is invalid to
attempt to define a new value of this type or to attempt to switch an
existing value to this type.
-
SVG_LENGTHTYPE_NUMBER (unsigned short)
No unit type was provided (i.e., a unitless value was specified), which
indicates a value in user units.
-
SVG_LENGTHTYPE_PERCENTAGE (unsigned short)
A percentage value was specified.
-
SVG_LENGTHTYPE_EMS (unsigned short)
A value was specified using the em units defined in CSS2.
-
SVG_LENGTHTYPE_EXS (unsigned short)
A value was specified using the ex units defined in CSS2.
-
SVG_LENGTHTYPE_PX (unsigned short)
A value was specified using the px units defined in CSS2.
-
SVG_LENGTHTYPE_CM (unsigned short)
A value was specified using the cm units defined in CSS2.
-
SVG_LENGTHTYPE_MM (unsigned short)
A value was specified using the mm units defined in CSS2.
-
SVG_LENGTHTYPE_IN (unsigned short)
A value was specified using the in units defined in CSS2.
-
SVG_LENGTHTYPE_PT (unsigned short)
A value was specified using the pt units defined in CSS2.
-
SVG_LENGTHTYPE_PC (unsigned short)
A value was specified using the pc units defined in CSS2.
-
unitType (readonly unsigned short)
The type of the value as specified by one of the SVG_LENGTHTYPE_*
constants defined on this interface.
-
value (float)
-
The value as a floating point value, in user units. Setting this
attribute will cause valueInSpecifiedUnits and
valueAsString to be updated automatically to reflect this setting.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the length
corresponds to a read only attribute or when the object itself is
read only.
-
valueInSpecifiedUnits (float)
-
The value as a floating point value, in the units expressed by
unitType. Setting this attribute will cause value and
valueAsString to be updated automatically to reflect this setting.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the length
corresponds to a read only attribute or when the object itself is
read only.
-
valueAsString (DOMString)
-
The value as a string value, in the units expressed by unitType.
Setting this attribute will cause value,
valueInSpecifiedUnits and unitType
to be updated automatically to reflect this
setting.
- DOMException, code SYNTAX_ERR
- Raised if the assigned string cannot
be parsed as a valid <length>.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the length
corresponds to a read only attribute or when the object itself is
read only.
- void newValueSpecifiedUnits(in unsigned short unitType, in float valueInSpecifiedUnits)
-
Reset the value as a number with an associated unitType, thereby
replacing the values for all of the attributes on the object.
-
unsigned short unitType
The unit type for the value (e.g., SVG_LENGTHTYPE_MM).
-
float valueInSpecifiedUnits
The new value.
- DOMException, code NOT_SUPPORTED_ERR
- Raised if unitType is SVG_LENGTHTYPE_UNKNOWN
or not a valid unit type constant (one of the other SVG_LENGTHTYPE_* constants
defined on this interface).
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the length
corresponds to a read only attribute or when the object itself is
read only.
- void convertToSpecifiedUnits(in unsigned short unitType)
-
Preserve the same underlying stored value, but reset the stored unit
identifier to the given unitType. Object attributes
unitType, valueInSpecifiedUnits and valueAsString
might be modified as a result of this method. For example, if the
original value were "0.5cm" and the method was invoked to convert to
millimeters, then the unitType would be changed to
SVG_LENGTHTYPE_MM, valueInSpecifiedUnits would be changed
to the numeric value 5 and valueAsString would be changed to
"5mm".
-
unsigned short unitType
The unit type to switch to (e.g., SVG_LENGTHTYPE_MM).
- DOMException, code NOT_SUPPORTED_ERR
- Raised if unitType is SVG_LENGTHTYPE_UNKNOWN
or not a valid unit type constant (one of the other SVG_LENGTHTYPE_* constants
defined on this interface).
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the length
corresponds to a read only attribute or when the object itself is
read only.
4.5.12 Interface SVGAnimatedLength
Used for attributes of basic type
<length> which can be
animated.
interface SVGAnimatedLength {
readonly attribute SVGLength baseVal;
readonly attribute SVGLength animVal;
};
-
baseVal (readonly SVGLength)
The base value of the given attribute before applying any animations.
-
animVal (readonly SVGLength)
A read only SVGLength representing the current animated value of
the given attribute. If the given attribute is not currently being
animated, then the SVGLength will have the same contents
as baseVal. The object referenced by animVal will always
be distinct from the one referenced by baseVal, even when
the attribute is not animated.
4.5.13 Interface SVGLengthList
This interface defines a list of SVGLength objects.
SVGLengthList has the same attributes and methods as other
SVGxxxList interfaces. Implementers may consider using a single base class
to implement the various SVGxxxList interfaces.
An SVGLengthList object can be designated as read only,
which means that attempts to modify the object will result in an exception
being thrown, as described below.
interface SVGLengthList {
readonly attribute unsigned long numberOfItems;
void clear() raises(DOMException);
SVGLength initialize(in SVGLength newItem) raises(DOMException);
SVGLength getItem(in unsigned long index) raises(DOMException);
SVGLength insertItemBefore(in SVGLength newItem, in unsigned long index) raises(DOMException);
SVGLength replaceItem(in SVGLength newItem, in unsigned long index) raises(DOMException);
SVGLength removeItem(in unsigned long index) raises(DOMException);
SVGLength appendItem(in SVGLength newItem) raises(DOMException);
};
-
numberOfItems (readonly unsigned long)
The number of items in the list.
- void clear()
-
Clears all existing current items from the list, with the result being
an empty list.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the list
corresponds to a read only attribute or when the object itself is
read only.
- SVGLength initialize(in SVGLength newItem)
-
Clears all existing current items from the list and re-initializes the
list to hold the single item specified by the parameter. If the inserted
item is already in a list, it is removed from its previous list before
it is inserted into this list. The inserted item is the item itself and
not a copy.
-
SVGLength newItem
The item which should become the only member of the list.
The item being inserted into the list.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the list
corresponds to a read only attribute or when the object itself is
read only.
- SVGLength getItem(in unsigned long index)
-
Returns the specified item from the list. The returned item is the
item itself and not a copy. Any changes made to the item are
immediately reflected in the list.
-
unsigned long index
The index of the item from the list which is to be
returned. The first item is number 0.
The selected item.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the list
corresponds to a read only attribute or when the object itself is
read only.
- SVGLength insertItemBefore(in SVGLength newItem, in unsigned long index)
-
Inserts a new item into the list at the specified position. The first
item is number 0. If newItem is already in a list, it is
removed from its previous list before it is inserted into this list.
The inserted item is the item itself and not a copy. If the item is
already in this list, note that the index of the item to insert
before is before the removal of the item.
-
SVGLength newItem
The item which is to be inserted into the list.
-
unsigned long index
The index of the item before which the new item is to be
inserted. The first item is number 0. If the index is equal to 0,
then the new item is inserted at the front of the list. If the index
is greater than or equal to numberOfItems, then the new item is
appended to the end of the list.
The inserted item.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the list
corresponds to a read only attribute or when the object itself is
read only.
- SVGLength replaceItem(in SVGLength newItem, in unsigned long index)
-
Replaces an existing item in the list with a new item. If
newItem is already in a list, it is removed from its
previous list before it is inserted into this list. The inserted item
is the item itself and not a copy. If the item is already in this
list, note that the index of the item to replace is before
the removal of the item.
-
SVGLength newItem
The item which is to be inserted into the list.
-
unsigned long index
The index of the item which is to be replaced. The first
item is number 0.
The inserted item.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the list
corresponds to a read only attribute or when the object itself is
read only.
- DOMException, code INDEX_SIZE_ERR
- Raised if the index number is
greater than or equal to numberOfItems.
- SVGLength removeItem(in unsigned long index)
-
Removes an existing item from the list.
-
unsigned long index
The index of the item which is to be removed. The first
item is number 0.
The removed item.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the list
corresponds to a read only attribute or when the object itself is
read only.
- DOMException, code INDEX_SIZE_ERR
- Raised if the index number is
greater than or equal to numberOfItems.
- SVGLength appendItem(in SVGLength newItem)
-
Inserts a new item at the end of the list. If newItem is
already in a list, it is removed from its previous list before it is
inserted into this list. The inserted item is the item itself and
not a copy.
-
SVGLength newItem
The item which is to be inserted. The first item is
number 0.
The inserted item.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the list
corresponds to a read only attribute or when the object itself is
read only.
4.5.14 Interface SVGAnimatedLengthList
Used for attributes of type SVGLengthList which can be animated.
interface SVGAnimatedLengthList {
readonly attribute SVGLengthList baseVal;
readonly attribute SVGLengthList animVal;
};
-
baseVal (readonly SVGLengthList)
The base value of the given attribute before applying any animations.
-
animVal (readonly SVGLengthList)
A read only SVGLengthList representing the current animated value of
the given attribute. If the given attribute is not currently being
animated, then the SVGLengthList will have the same contents
as baseVal. The object referenced by animVal will always
be distinct from the one referenced by baseVal, even when
the attribute is not animated.
4.5.15 Interface SVGAngle
The SVGAngle interface corresponds to the
<angle> basic data type.
An SVGAngle object can be designated as read only,
which means that attempts to modify the object will result in an exception
being thrown, as described below.
interface SVGAngle {
// Angle Unit Types
const unsigned short SVG_ANGLETYPE_UNKNOWN = 0;
const unsigned short SVG_ANGLETYPE_UNSPECIFIED = 1;
const unsigned short SVG_ANGLETYPE_DEG = 2;
const unsigned short SVG_ANGLETYPE_RAD = 3;
const unsigned short SVG_ANGLETYPE_GRAD = 4;
readonly attribute unsigned short unitType;
attribute float value setraises(DOMException);
attribute float valueInSpecifiedUnits setraises(DOMException);
attribute DOMString valueAsString setraises(DOMException);
void newValueSpecifiedUnits(in unsigned short unitType, in float valueInSpecifiedUnits) raises(DOMException);
void convertToSpecifiedUnits(in unsigned short unitType) raises(DOMException);
};
-
SVG_ANGLETYPE_UNKNOWN (unsigned short)
The unit type is not one of predefined unit types. It is invalid to
attempt to define a new value of this type or to attempt to switch an
existing value to this type.
-
SVG_ANGLETYPE_UNSPECIFIED (unsigned short)
No unit type was provided (i.e., a unitless value was specified). For
angles, a unitless value is treated the same as if degrees were
specified.
-
SVG_ANGLETYPE_DEG (unsigned short)
The unit type was explicitly set to degrees.
-
SVG_ANGLETYPE_RAD (unsigned short)
The unit type is radians.
-
SVG_ANGLETYPE_GRAD (unsigned short)
The unit type is radians.
-
unitType (readonly unsigned short)
The type of the value as specified by one of the SVG_ANGLETYPE_*
constants defined on this interface.
-
value (float)
-
The angle value as a floating point value, in degrees. Setting this
attribute will cause valueInSpecifiedUnits and
valueAsString to be updated automatically to reflect this setting.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the angle
corresponds to a read only attribute or when the object itself is
read only.
-
valueInSpecifiedUnits (float)
-
The angle value as a floating point value, in the units expressed by
unitType. Setting this attribute will cause value and
valueAsString to be updated automatically to reflect this setting.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the angle
corresponds to a read only attribute or when the object itself is
read only.
-
valueAsString (DOMString)
-
The angle value as a string value, in the units expressed by
unitType. Setting this attribute will cause value,
valueInSpecifiedUnits and unitType
to be updated automatically to reflect
this setting.
- DOMException, code SYNTAX_ERR
- Raised if the assigned string cannot
be parsed as a valid <angle>.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the angle
corresponds to a read only attribute or when the object itself is
read only.
- void newValueSpecifiedUnits(in unsigned short unitType, in float valueInSpecifiedUnits)
-
Reset the value as a number with an associated unitType, thereby
replacing the values for all of the attributes on the object.
-
unsigned short unitType
The unit type for the value (e.g., SVG_ANGLETYPE_DEG).
-
float valueInSpecifiedUnits
The angle value.
- DOMException, code NOT_SUPPORTED_ERR
- Raised if unitType is SVG_ANGLETYPE_UNKNOWN
or not a valid unit type constant (one of the other SVG_ANGLETYPE_* constants
defined on this interface).
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the angle
corresponds to a read only attribute or when the object itself is
read only.
- void convertToSpecifiedUnits(in unsigned short unitType)
-
Preserve the same underlying stored value, but reset the stored unit
identifier to the given unitType. Object attributes
unitType, valueInSpecifiedUnits and valueAsString
might be modified as a result of this method.
-
unsigned short unitType
The unit type to switch to (e.g., SVG_ANGLETYPE_DEG).
- DOMException, code NOT_SUPPORTED_ERR
- Raised if unitType is SVG_ANGLETYPE_UNKNOWN
or not a valid unit type constant (one of the other SVG_ANGLETYPE_* constants
defined on this interface).
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the angle
corresponds to a read only attribute or when the object itself is
read only.
4.5.16 Interface SVGAnimatedAngle
Used for attributes of basic data type <angle>
that can be animated.
interface SVGAnimatedAngle {
readonly attribute SVGAngle baseVal;
readonly attribute SVGAngle animVal;
};
-
baseVal (readonly SVGAngle)
The base value of the given attribute before applying any animations.
-
animVal (readonly SVGAngle)
A read only SVGAngle representing the current animated value of
the given attribute. If the given attribute is not currently being
animated, then the SVGAngle will have the same contents
as baseVal. The object referenced by animVal will always
be distinct from the one referenced by baseVal, even when
the attribute is not animated.
4.5.17 Interface SVGColor
The SVGColor interface corresponds to color value definition for
properties ‘stop-color’, ‘flood-color’ and
‘lighting-color’ and is a base class for interface SVGPaint.
It incorporates SVG's extended notion of color, which incorporates
ICC-based color specifications.
Interface SVGColor does not correspond to the
<color> basic data type. For
the <color> basic data type,
the applicable DOM interfaces are defined in
DOM Level 2 Style;
in particular, see the RGBColor interface
([DOM2STYLE], section 2.2).
Note: The SVGColor interface is deprecated, and may be dropped
from future versions of the SVG specification.
interface SVGColor : CSSValue {
// Color Types
const unsigned short SVG_COLORTYPE_UNKNOWN = 0;
const unsigned short SVG_COLORTYPE_RGBCOLOR = 1;
const unsigned short SVG_COLORTYPE_RGBCOLOR_ICCCOLOR = 2;
const unsigned short SVG_COLORTYPE_CURRENTCOLOR = 3;
readonly attribute unsigned short colorType;
readonly attribute RGBColor rgbColor;
readonly attribute SVGICCColor iccColor;
void setRGBColor(in DOMString rgbColor) raises(SVGException);
void setRGBColorICCColor(in DOMString rgbColor, in DOMString iccColor) raises(SVGException);
void setColor(in unsigned short colorType, in DOMString rgbColor, in DOMString iccColor) raises(SVGException);
};
-
SVG_COLORTYPE_UNKNOWN (unsigned short)
The color type is not one of predefined types. It is invalid to attempt
to define a new value of this type or to attempt to switch an existing
value to this type.
-
SVG_COLORTYPE_RGBCOLOR (unsigned short)
An sRGB color has been specified without an alternative ICC color
specification.
-
SVG_COLORTYPE_RGBCOLOR_ICCCOLOR (unsigned short)
An sRGB color has been specified along with an alternative ICC color
specification.
-
SVG_COLORTYPE_CURRENTCOLOR (unsigned short)
Corresponds to when keyword currentColor
has been specified.
-
colorType (readonly unsigned short)
The type of the value as specified by one of the SVG_COLORTYPE_*
constants defined on this interface.
-
rgbColor (readonly RGBColor)
The color specified in the sRGB color space.
-
iccColor (readonly SVGICCColor)
The alternate ICC color specification.
- void setRGBColor(in DOMString rgbColor)
-
Modifies the color value to be the specified sRGB color without an
alternate ICC color specification.
-
DOMString rgbColor
A string that matches <color>,
which specifies the new sRGB color value.
- SVGException, code SVG_INVALID_VALUE_ERR
- Raised if rgbColor
does not match <color>.
- void setRGBColorICCColor(in DOMString rgbColor, in DOMString iccColor)
-
Modifies the color value to be the specified sRGB color with an
alternate ICC color specification.
-
DOMString rgbColor
A string that matches <color>,
which specifies the new sRGB color value.
-
DOMString iccColor
A string that matches <icccolor>,
which specifies the alternate ICC color specification.
- SVGException, code SVG_INVALID_VALUE_ERR
- Raised if rgbColor
does not match <color>
or if iccColor does not match
<icccolor>.
- void setColor(in unsigned short colorType, in DOMString rgbColor, in DOMString iccColor)
-
Sets the color value as specified by the parameters. If
colorType requires an RGBColor, then
rgbColor must be a string that matches
<color>;
otherwise, rgbColor. must be null. If colorType
requires an SVGICCColor, then iccColor must be a string
that matches <icccolor>;
otherwise, iccColor must be null.
-
unsigned short colorType
One of the defined constants for colorType.
-
DOMString rgbColor
The specification of an sRGB color, or null.
-
DOMString iccColor
The specification of an ICC color, or null.
- SVGException, code SVG_INVALID_VALUE_ERR
- Raised if one of the
parameters has an invalid value.
4.5.18 Interface SVGICCColor
The SVGICCColor interface expresses an ICC-based color
specification.
Note: The SVGICCColor interface is deprecated, and may be dropped
from future versions of the SVG specification.
interface SVGICCColor {
attribute DOMString colorProfile setraises(DOMException);
readonly attribute SVGNumberList colors;
};
-
colorProfile (DOMString)
-
The name of the color profile, which is the first parameter of an ICC
color specification.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised on an attempt
to change the value of a read only attribute.
-
colors (readonly SVGNumberList)
The list of color values that define this ICC color. Each color value
is an arbitrary floating point number.
4.5.19 Interface SVGRect
Represents rectangular geometry. Rectangles are defined as consisting
of a (x,y) coordinate pair identifying a minimum X value, a minimum Y
value, and a width and height, which are usually constrained to be
non-negative.
An SVGRect object can be designated as read only,
which means that attempts to modify the object will result in an exception
being thrown, as described below.
interface SVGRect {
attribute float x setraises(DOMException);
attribute float y setraises(DOMException);
attribute float width setraises(DOMException);
attribute float height setraises(DOMException);
};
-
x (float)
-
The x coordinate of the rectangle, in user units.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the rectangle
corresponds to a read only attribute or when the object itself is
read only.
-
y (float)
-
The y coordinate of the rectangle, in user units.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the rectangle
corresponds to a read only attribute or when the object itself is
read only.
-
width (float)
-
The width coordinate of the rectangle, in user units.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the rectangle
corresponds to a read only attribute or when the object itself is
read only.
-
height (float)
-
The height coordinate of the rectangle, in user units.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised when the rectangle
corresponds to a read only attribute or when the object itself is
read only.
4.5.20 Interface SVGAnimatedRect
Used for attributes of type SVGRect which can be animated.
interface SVGAnimatedRect {
readonly attribute SVGRect baseVal;
readonly attribute SVGRect animVal;
};
-
baseVal (readonly SVGRect)
The base value of the given attribute before applying any animations.
-
animVal (readonly SVGRect)
A read only SVGRect representing the current animated value of
the given attribute. If the given attribute is not currently being
animated, then the SVGRect will have the same contents
as baseVal. The object referenced by animVal will always
be distinct from the one referenced by baseVal, even when
the attribute is not animated.
4.5.21 Interface SVGUnitTypes
The SVGUnitTypes interface defines a commonly used set of constants
and is a base interface used by SVGGradientElement,
SVGPatternElement, SVGClipPathElement, SVGMaskElement
and SVGFilterElement.
interface SVGUnitTypes {
// Unit Types
const unsigned short SVG_UNIT_TYPE_UNKNOWN = 0;
const unsigned short SVG_UNIT_TYPE_USERSPACEONUSE = 1;
const unsigned short SVG_UNIT_TYPE_OBJECTBOUNDINGBOX = 2;
};
-
SVG_UNIT_TYPE_UNKNOWN (unsigned short)
The type is not one of predefined types. It is invalid to attempt to
define a new value of this type or to attempt to switch an existing
value to this type.
-
SVG_UNIT_TYPE_USERSPACEONUSE (unsigned short)
Corresponds to value 'userSpaceOnUse'.
-
SVG_UNIT_TYPE_OBJECTBOUNDINGBOX (unsigned short)
Corresponds to value 'objectBoundingBox'.
4.5.22 Interface SVGStylable
The SVGStylable interface is implemented on all objects
corresponding to SVG elements that can have
‘style’,
‘class’ and
presentation attributes specified on them. It
is thus an ancestor interface for many of the interfaces defined in this
specification.
interface SVGStylable {
readonly attribute SVGAnimatedString className;
readonly attribute CSSStyleDeclaration style;
CSSValue getPresentationAttribute(in DOMString name);
};
-
className (readonly SVGAnimatedString)
Corresponds to attribute ‘class’ on the given element.
-
style (readonly CSSStyleDeclaration)
Corresponds to attribute ‘style’ on the given element. If the
user agent does not support styling
with CSS, then this attribute must always have the value of null.
- CSSValue getPresentationAttribute(in DOMString name)
-
Returns the base (i.e., static) value of a given
presentation attribute as an object of type CSSValue. The returned object
is live; changes to the objects represent immediate changes to the
objects to which the CSSValue is attached.
Note: The getPresentationAttribute
method is deprecated,
and may be dropped from future versions of the SVG specification.
-
DOMString name
The name of the presentation attribute whose value is to be
returned.
The static/base value of the given presentation attribute
as a CSSValue, or null if the given attribute does not have a
specified value.
4.5.23 Interface SVGLocatable
Interface SVGLocatable is for all elements which either have a
‘transform’ attribute or don't have a
‘transform’ attribute
but whose content can have a bounding box in current user space.
interface SVGLocatable {
readonly attribute SVGElement nearestViewportElement;
readonly attribute SVGElement farthestViewportElement;
SVGRect getBBox();
SVGMatrix getCTM();
SVGMatrix getScreenCTM();
SVGMatrix getTransformToElement(in SVGElement element) raises(SVGException);
};
-
nearestViewportElement (readonly SVGElement)
The element which established the current viewport. Often, the nearest
ancestor ‘svg’ element. Null if the current element is the
outermost svg element.
-
farthestViewportElement (readonly SVGElement)
The farthest ancestor ‘svg’ element. Null if the current element
is the outermost svg element.
- SVGRect getBBox()
-
Returns the tight bounding box in current user space (i.e., after
application of the ‘transform’ attribute, if any) on the
geometry of all contained graphics elements, exclusive of stroking, clipping, masking and
filter effects). Note that getBBox must return the actual bounding box
at the time the method was called, even in case the element has not
yet been rendered.
An SVGRect object that defines the bounding box.
- SVGMatrix getCTM()
-
Returns the transformation matrix from current user units (i.e., after
application of the ‘transform’ attribute, if any) to the viewport
coordinate system for the nearestViewportElement.
An SVGMatrix object that defines the CTM.
- SVGMatrix getScreenCTM()
-
Returns the transformation matrix from current user units (i.e., after
application of the ‘transform’ attribute, if any) to the parent
user agent's notice of a "pixel". For display devices, ideally this
represents a physical screen pixel. For other devices or environments
where physical pixel sizes are not known, then an algorithm similar to
the CSS2 definition of a "pixel" can be used instead. Note that null
is returned if this element is not hooked into the document tree. This
method would have been more aptly named as getClientCTM
,
but the name getScreenCTM
is kept for historical reasons.
An SVGMatrix object that defines the given
transformation matrix.
- SVGMatrix getTransformToElement(in SVGElement element)
-
Returns the transformation matrix from the user coordinate system on the
current element (after application of the ‘transform’ attribute,
if any) to the user coordinate system on parameter element
(after application of its ‘transform’ attribute, if any).
-
SVGElement element
The target element.
An SVGMatrix object that defines the transformation.
- SVGException, code SVG_MATRIX_NOT_INVERTABLE
- Raised if the currently
defined transformation matrices make it impossible to compute the
given matrix (e.g., because one of the transformations is singular).
Interface SVGTransformable contains properties and methods that
apply to all elements which have attribute
‘transform’.
interface SVGTransformable : SVGLocatable {
readonly attribute SVGAnimatedTransformList transform;
};
-
transform (readonly SVGAnimatedTransformList)
Corresponds to attribute ‘transform’ on the given element.
4.5.25 Interface SVGTests
Interface SVGTests defines an interface which applies to all
elements which have attributes
‘requiredFeatures’,
‘requiredExtensions’ and
‘systemLanguage’.
interface SVGTests {
readonly attribute SVGStringList requiredFeatures;
readonly attribute SVGStringList requiredExtensions;
readonly attribute SVGStringList systemLanguage;
boolean hasExtension(in DOMString extension);
};
-
requiredFeatures (readonly SVGStringList)
Corresponds to attribute ‘requiredFeatures’ on the given element.
-
requiredExtensions (readonly SVGStringList)
Corresponds to attribute ‘requiredExtensions’ on the given element.
-
systemLanguage (readonly SVGStringList)
Corresponds to attribute ‘systemLanguage’ on the given element.
- boolean hasExtension(in DOMString extension)
-
Returns true if the user agent supports the given extension, specified
by a URI.
-
DOMString extension
The name of the extension, expressed as a URI.
True or false, depending on whether the given extension is
supported.
4.5.26 Interface SVGLangSpace
Interface SVGLangSpace defines an interface which applies to all
elements which have attributes
‘xml:lang’ and
‘xml:space’.
interface SVGLangSpace {
attribute DOMString xmllang setraises(DOMException);
attribute DOMString xmlspace setraises(DOMException);
};
-
xmllang (DOMString)
-
Corresponds to attribute ‘xml:lang’ on the given element.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised on an
attempt to change the value of a read only attribute.
-
xmlspace (DOMString)
-
Corresponds to attribute ‘xml:space’ on the given element.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised on an
attempt to change the value of a read only attribute.
4.5.27 Interface SVGExternalResourcesRequired
Interface SVGExternalResourcesRequired defines an interface which
applies to all elements where this element or one of its descendants can
reference an external resource.
interface SVGExternalResourcesRequired {
readonly attribute SVGAnimatedBoolean externalResourcesRequired;
};
-
externalResourcesRequired (readonly SVGAnimatedBoolean)
Corresponds to attribute ‘externalResourcesRequired’ on the given
element. Note that the SVG DOM defines the attribute
‘externalResourcesRequired’ as being of type
SVGAnimatedBoolean, whereas the SVG language definition says that
‘externalResourcesRequired’ is not animated. Because the SVG
language definition states that ‘externalResourcesRequired’
cannot be animated, the animVal will always be
the same as the baseVal.
4.5.28 Interface SVGFitToViewBox
Interface SVGFitToViewBox defines DOM attributes that apply to
elements which have XML attributes
‘viewBox’ and
‘preserveAspectRatio’.
interface SVGFitToViewBox {
readonly attribute SVGAnimatedRect viewBox;
readonly attribute SVGAnimatedPreserveAspectRatio preserveAspectRatio;
};
-
viewBox (readonly SVGAnimatedRect)
Corresponds to attribute ‘viewBox’ on the given element.
-
preserveAspectRatio (readonly SVGAnimatedPreserveAspectRatio)
Corresponds to attribute ‘preserveAspectRatio’ on the given element.
4.5.29 Interface SVGZoomAndPan
The SVGZoomAndPan interface defines attribute zoomAndPan and
associated constants.
interface SVGZoomAndPan {
// Zoom and Pan Types
const unsigned short SVG_ZOOMANDPAN_UNKNOWN = 0;
const unsigned short SVG_ZOOMANDPAN_DISABLE = 1;
const unsigned short SVG_ZOOMANDPAN_MAGNIFY = 2;
attribute unsigned short zoomAndPan setraises(DOMException);
};
-
SVG_ZOOMANDPAN_UNKNOWN (unsigned short)
The enumeration was set to a value that is not one of predefined types.
It is invalid to attempt to define a new value of this type or to
attempt to switch an existing value to this type.
-
SVG_ZOOMANDPAN_DISABLE (unsigned short)
Corresponds to value 'disable'.
-
SVG_ZOOMANDPAN_MAGNIFY (unsigned short)
Corresponds to value 'magnify'.
-
zoomAndPan (unsigned short)
-
Corresponds to attribute ‘zoomAndPan’ on the given element. The
value must be one of the SVG_ZOOMANDPAN_* constants defined on this
interface.
- DOMException, code NO_MODIFICATION_ALLOWED_ERR
- Raised on an
attempt to change the value of a read only attribute.
4.5.30 Interface SVGViewSpec
The interface corresponds to an SVG View Specification.
interface SVGViewSpec : SVGZoomAndPan,
SVGFitToViewBox {
readonly attribute SVGTransformList transform;
readonly attribute SVGElement viewTarget;
readonly attribute DOMString viewBoxString;
readonly attribute DOMString preserveAspectRatioString;
readonly attribute DOMString transformString;
readonly attribute DOMString viewTargetString;
};
-
transform (readonly SVGTransformList)
Corresponds to the transform setting on the SVG View Specification.
-
viewTarget (readonly SVGElement)
Corresponds to the viewTarget setting on the SVG View Specification.
-
viewBoxString (readonly DOMString)
Corresponds to the viewBox setting on the SVG View Specification.
-
preserveAspectRatioString (readonly DOMString)
Corresponds to the preserveAspectRatio setting on the SVG View Specification.
-
transformString (readonly DOMString)
Corresponds to the transform setting on the SVG View Specification.
-
viewTargetString (readonly DOMString)
Corresponds to the viewTarget setting on the SVG View Specification.
4.5.31 Interface SVGURIReference
Interface SVGURIReference defines an interface which applies to all
elements which have the collection of XLink attributes, such as
‘xlink:href’, which define a URI reference.
interface SVGURIReference {
readonly attribute SVGAnimatedString href;
};
-
href (readonly SVGAnimatedString)
Corresponds to attribute ‘xlink:href’ on
the given element.
4.5.32 Interface SVGCSSRule
SVG extends interface CSSRule with interface SVGCSSRule
by adding an SVGColorProfileRule rule to allow for specification of
ICC-based color.
It is likely that this extension will become part of a future version of
CSS and DOM.
interface SVGCSSRule : CSSRule {
const unsigned short COLOR_PROFILE_RULE = 7;
};
-
COLOR_PROFILE_RULE (unsigned short)
The rule is an @color-profile.
4.5.33 Interface SVGRenderingIntent
The SVGRenderingIntent interface defines the enumerated list of
possible values for
‘rendering-intent’ attributes or descriptors.
interface SVGRenderingIntent {
// Rendering Intent Types
const unsigned short RENDERING_INTENT_UNKNOWN = 0;
const unsigned short RENDERING_INTENT_AUTO = 1;
const unsigned short RENDERING_INTENT_PERCEPTUAL = 2;
const unsigned short RENDERING_INTENT_RELATIVE_COLORIMETRIC = 3;
const unsigned short RENDERING_INTENT_SATURATION = 4;
const unsigned short RENDERING_INTENT_ABSOLUTE_COLORIMETRIC = 5;
};
-
RENDERING_INTENT_UNKNOWN (unsigned short)
The type is not one of predefined types. It is invalid to attempt to
define a new value of this type or to attempt to switch an existing value
to this type.
-
RENDERING_INTENT_AUTO (unsigned short)
Corresponds to a value of 'auto'.
-
RENDERING_INTENT_PERCEPTUAL (unsigned short)
Corresponds to a value of 'perceptual'.
-
RENDERING_INTENT_RELATIVE_COLORIMETRIC (unsigned short)
Corresponds to a value of 'relative-colorimetric'.
-
RENDERING_INTENT_SATURATION (unsigned short)
Corresponds to a value of 'saturation'.
-
RENDERING_INTENT_ABSOLUTE_COLORIMETRIC (unsigned short)
Corresponds to a value of 'absolute-colorimetric'.