電腦系統更新藍屏怎麼解決？-故障排查-PHP中文網

當電腦系統更新後出現藍屏問題時，該如何解決？ php小編柚子帶來詳細的故障排除步驟，幫助您快速解決這個問題。以下內容將提供：導致更新藍色畫面的常見原因使用系統還原或安全模式復原系統檢查驅動程式更新和硬體故障其他可能的解決方案繼續閱讀以了解如何解決電腦系統更新後的藍色畫面問題，確保您的系統正常運行。

電腦系統更新藍屏怎麼解決？

一、電腦系統更新藍屏怎麼解決？

如果您的電腦在系統更新或安裝時遇到藍色畫面錯誤，可以嘗試以下方法解決：

1. 重新啟動電腦：嘗試重新啟動電腦，並在啟動時按F8鍵進入安全模式。此時可能會有選項讓您恢復到先前的系統狀態。

2. 執行系統還原：如果電腦無法啟動或進入安全模式，您可以嘗試執行系統還原來回到先前的系統狀態。

3. 更新驅動程式和修補程式：有些系統更新和安裝需要更新某些驅動程式和修補程式。請查看更新日誌，並檢查是否有缺少的更新需要下載安裝。

4. 卸載近期安裝的軟體：有些軟體可能與系統更新不相容，您可以嘗試卸載這些軟體，並進行系統更新。

5. 防止未來藍色畫面錯誤：您可以在更新和安裝系統更新之前備份原始系統的重要檔案。這樣如果出現問題，您依然可以恢復到原來的狀態。

如果您嘗試了上述方法，問題仍未解決，建議聯絡相關專業技術人員進行進一步維修。

二、電腦系統重裝後藍屏？

1、如果藍屏前安裝了軟體或驅動，進安全模式下，把新安裝的軟體及驅動卸載或刪除後，再開機試下。

2、如果刪除後仍然藍屏，或根本進不了安全模式，則重新安裝作業系統試下。

3、重裝系統後仍藍屏，考慮硬體問題。先將電腦裡面的灰塵徹底清理一下，將記憶體、顯示卡、PCI插槽上的裝置拆下，用橡皮探試試看。因為灰塵造成溫度過高、接觸不良等也會造成藍屏；同時將CPU、顯示卡等風扇拆下，更換新的散熱矽膠；另外檢查下所有硬體的溫度是否正常。

4、如果清潔電腦後還是不行，則用替換法檢查電腦硬件，如果沒有可替換的硬體或不熟悉電腦，建議找專業維修人員處理。

5、硬體替換依下列順序排查：記憶體、硬碟、顯示卡、主機板、電源供應器、其它硬體、CPU。

6、採用替換法時最好拔掉電腦上所有連接線及開機不需要用到的硬件，只保留電源、主機板、CPU、記憶體、顯示卡、硬碟、顯示器。 7.排查時注意檢查硬體上面是否有焦味，硬體上的電容是否有鼓包現象。

三、電腦系統意外終止啟動後藍屏？

原因

可能係統檔案遺失造成的，也可能是硬碟出現磁碟壞道造成的，還有是記憶體條氧化造成！

解決方法

1.先把內存條取出來，用橡皮擦，擦拭金屬排線！然後清理乾淨，插進卡槽，開機再看狀況！

2.是開機按F8按鍵！進入進階設定，用上下鍵移動遊標，停在最後一次配置上，恢復系統！

3.重裝系統來恢復電腦！

四、電腦系統已關閉藍色畫面怎麼處理？

有三種方式來解決，出現藍屏，可能係統文件丟失造成的，也可能是硬碟出現磁碟壞道造成的，還有是內存條氧化造成！

首先，把記憶條取出來，用橡皮擦，擦拭金屬排線！然後清理乾淨，插進卡槽，開機再看狀況！

一種是開機按F8按鍵！進入進階設定，用上下鍵移動遊標，停在最後一次配置上，恢復系統！

最後一種，重裝系統來恢復電腦！

五、電腦系統關閉藍色畫面怎麼辦？

原因及解決方法如下：

1.退出Windows時的聲音檔案損壞

先確定退出Windows聲音檔案是否已毀損開啟控制面板，開啟聲音，將退出Windows聲音取消。如果Windows正常關閉，則問題是由退出聲音檔案引起的，要解決這一問題，可以從備份中恢復聲音檔案或重新安裝提供聲音檔案的程序，也可定義退出Windows為無聲。

2.快速關機不正常

快速關機是Windows98中的新增功能，可以大幅減少關機時間，但是該功能與某些硬體不相容，可能會導致電腦停止回應。可執行Msconfig，在進階選項中停用快速關機。如果電腦能正常關機，則表示硬體設備不相容現象存在。

3.注意高階電源管理

In addition, the Advanced Power Management (APM) function on the computer can also cause shutdown or black screen issues. To determine whether APM is causing the shutdown problem, open Device Manager and open system devices. Disable the power management selection in Advanced Power Management. If the computer shuts down normally, the cause of the problem may be APM.

4. Start-up and shutdown failure

We often encounter problems such as when Windows just starts, it will show that you can safely shut down the computer, or it will shut down immediately upon startup or restart upon shutdown. The cause of this type of failure is generally caused by damage to the Wininit.exe or Vmm32.vxd file. The solution is to retrieve these two files from the WINDOWS installation program compressed package. Place it in the Windows system subdirectory, rename Vmm32.vxd to Vmm32. Back it up, then open the system tool, select the system file checker in the system information tool, select to extract a file from the installation disk, and enter Wininit.exe or Vmm32.vxd . Repeat this step to replace the file Wininit.exe or Vmm32.vxd.

5. There is a problem with Config.sys or Autoexec.bat

Extract a file from the installation disk. In addition, check whether there is a conflict in the Config.sys file or Autoexec.bat file. Use a text editor to check the contents of these two files to see if there are redundant commands. You can also use rem to prohibit the execution of certain statements and gradually eliminate them until conflicting commands are found.

6. Check the CMOS settings

Incorrect CMOS settings can also cause computer shutdown problems. When the computer starts, you can enter the CMOS settings page and focus on checking the CPU FSB, power management, virus detection, IRQ interrupt shutdown, and disk Are the startup sequence and other options set correctly? For the specific setting method, you can refer to your motherboard manual, which has very detailed setting instructions. If you really don’t understand the settings, it is recommended to just use the factory default settings.

6. Solution to blue screen problem when computer starts up

Common causes

It is a common fault phenomenon that a blue screen appears as soon as the computer starts up. It may be caused by the following reasons:

Hardware failure: such as memory module damage, hard disk failure, etc. Driver issues: Outdated or incompatible drivers. Corrupted system files: System files are damaged or deleted. Virus infection: Malware can corrupt the system, causing a blue screen. Power supply issues: An unstable power supply can cause your computer to blue screen.

Solutions

The following are some common solutions to solve the blue screen problem on computer startup:

1. Check the hardware

First, rule out the possibility of hardware failure. You can try the following:

Reseat the memory modules and make sure they are installed correctly. To check whether the hard disk is working properly, you can perform disk testing. Check other hardware components for damage or poor connections.

2. Update drivers

Outdated or incompatible drivers may cause system crashes. Drivers can be updated by following these steps:

Open Device Manager. Find the device in question (usually with a yellow exclamation mark). Right-click the device and select "Update Driver". Follow the prompts to update the driver.

3. Repair system files

If system files are damaged, they can be repaired by the following methods:

Run the System File Checker (SFC). Open a command prompt, type "sfc /scannow" and press Enter. Wait for the system file check to complete and if there are any issues, SFC will try to fix them.

4. Scan for viruses

Conducting a comprehensive virus scan can eliminate blue screen problems caused by malware.

5. Check the power supply

Power supply problems may cause computer instability and may also cause blue screen problems. You can try the following methods:

Replace the power cord. Check whether the power supply is overheated and clean the power supply fan. Use a stable power source.

If the above methods cannot solve the problem, it is recommended to consult a professional computer repairman for further troubleshooting.

Thank you for reading this article. I hope that through this article you can solve the problem of blue screen on computer startup and improve the stability and performance of your computer.

7. What should I do if a blue screen occurs after the computer system is updated?

I hope my answer can solve your worries

If you can’t turn on the computer, press f8 to restart into safe mode. If you can turn on the computer, press below too

First, it may be the blue screen caused by the incompatibility lock of your graphics card. It is recommended You uninstall the graphics card driver in safe mode and install the driver from the driver disk that comes with the computer graphics card.

Second, it may be caused by software conflict lock. You can adjust the hardware acceleration to maximum or minimum on the desktop--right-click--Properties--Advanced options---Third, if the above can solve your blue screen, I recommend that you install Tencent Computer Butler, conduct a safety check, and clear out system garbage (because system garbage may also cause your computer to crash with a blue screen)

Fourth, during driver installation, you can open Tencent Computer Butler --- Toolbox ---Hardware detection--Install the driver, and Tencent Computer Manager will automatically retrieve the latest driver for your computer hardware to ensure the normal use of your computer driver.

If you are not satisfied with my answer, you can continue to ask questions or provide valuable suggestions, thank you

8. What should I do if the computer system is updated and a blue screen occurs?

Solution to blue screen:

1. Press F8 immediately after booting until the advanced options appear. Release, select "Last Known Good Configuration" and press Enter to repair.

2. If it still doesn't work, press F8 to enter safe mode and restore the system or reinstall the system:

(1 ) Insert the prepared one into the computer USB interface, press the boot shortcut key to enter the u startup main menu interface, select "Dafushu win8pe standard version (new machine)" and press Enter;

(2) Install the computer on Dafushu PE In the tool, select the win7 system image and install it in the c drive, click OK;

(3) Reminder that the program will perform the restore operation, click "OK";

(4) Then proceed with the program restore process, and wait quietly for the image release to complete ;

(5) The computer will automatically restart, and then proceed with the program installation process. After the installation is completed, the general parameters are set and the win7 system can be used.

9. Is it necessary to update the computer system if a blue screen appears?

It is not necessary to update the computer system if there is a blue screen. The blue screen problem includes software operating system problems and computer hardware failures, which will cause the blue screen. You can reinstall the computer operating system first to see if the blue screen can be solved. If the blue screen persists, If a problem occurs, it is necessary to test the computer's hardware memory, CPU graphics card, etc. before confirming the specific fault and repairing it.

Computer blue screen, also known as blue screen of death (BSOD), refers to the situation where the computer cannot continue to work normally after a blue screen appears. A blue screen means a serious system error has occurred, which may be caused by a software or hardware problem. The following are several common causes of computer blue screen failure:

Hardware failure: It may be caused by hardware failure such as memory, hard disk, power supply, etc. Driver issues: Outdated, incompatible, or corrupted drivers can cause blue screens. Memory problems: Memory problems, such as incorrect installation, damage, insufficient memory, etc., can also cause blue screens. System file errors: Corrupted or missing system files may also cause a blue screen. Malware infection: The presence of viruses or malware can cause a blue screen.

How to solve the computer blue screen problem?

When a computer blue screen appears, you can try the following methods to solve the problem:

Check the hardware: First check if there are any problems with the hardware, such as memory, hard disk, power supply, etc. If it is caused by hardware failure, you can replace the faulty component. Update drivers: Check and update all required drivers for your hardware to make sure they are compatible with the operating system. Repair system files: Use the system's own tools, such as Windows' SFC (System File Checker) tool, to scan and repair system files. Anti-virus software scan: Run anti-virus software to perform a full system scan to ensure that the system is not infected by malware. System Restore: If you did not install new software or drivers after the problem occurred, you can try using System Restore to restore your system to a previous state.

How to prevent computer blue screen?

In addition to solving problems, it is also very important to prevent computer blue screens. Here are some ways to prevent blue screens on your computer:

Update drivers regularly: Make sure the drivers for all your hardware are up to date, which can help resolve driver compatibility issues. Install reliable anti-virus software: Update the anti-virus software regularly and perform a full scan to remove potential threats from the system. Regular computer maintenance: Cleaning temporary files, uninstalling unnecessary programs, defragmenting the hard drive, etc. can improve computer performance. Avoid overuse of your computer: Using your computer for long periods of time can cause your hardware to overheat. Taking adequate breaks can help keep your computer running normally.