iPad被停用，沒有電腦如何解救？ php小編草莓帶來無電腦解鎖指南。本文將介紹多種不同iOS版本及停用狀態的解鎖方式，詳細說明每種方法的操作步驟。無論是恢復模式、DFU模式，或是使用第三方工具，都能幫你輕鬆解除iPad停用狀態，恢復對裝置的使用權。
不用電腦無法解除
iPad已停用有三種方式可以恢復，但都只能透過電腦恢復使用。
第一種：使用iCloud抹除密碼
1.在電腦上開啟iCloud，登入Apple ID。
2.點選上方「所有裝置」選擇需要抹除開機密碼的iPad裝置名稱。
3.點選“抹除iPad設備名稱”，即可抹除iPad開機密碼。 （iPad裡面資料也會同時抹掉，可以透過備份來復原）
注意：需要抹除密碼的iPad必須是連網狀態，否則無法進行抹除。
第二種：連接iTunes，恢復iPad。
1.關閉iPad，長按電源鍵關機。
2.開啟電腦上的iTunes，用數據線連接iPad與電腦。
3.長按iPad的電源鍵，出現白色的蘋果標誌後按住home鍵，等到iPad黑屏以後，馬上鬆開電源鍵，繼續長按home鍵，直到iTunes彈出對話框。
4.如果你的ipad是最新系統，可以直接選擇“恢復iPad”，如果你的iPad不是最新系統，選擇“恢復並更新”。
5.確認恢復，根據電腦螢幕上的iTunes提示，點擊下一步和同意選項，開始設備恢復。
6.恢復完成。 iPad恢復完成以後會自動還原為出廠設定。
注意：如果之前做過備份，可以透過iTunes或iCloud進行資料恢復，如果沒有做過備份，所有內容遺失，設備需要全部重新下載應用程式和設定。
第二種：使用瘋師傅蘋果密碼解鎖抹除iPad密碼（如果前兩種方法使用過都無法恢復停用，就可以藉助第三方專業軟體來進行恢復，操作也很簡單）
1.電腦下載瘋師傅蘋果密碼解鎖，安裝並運作。
2.選擇「解鎖螢幕密碼」模式，然後用數據線連接iPad與電腦。 （如果iPad無法辨識可以選擇開啟 iTunes 進行辨識）。
3.依照電腦螢幕提示，設定iPad為DFU或恢復模式。
4.下載韌體。
5.點擊“開始解鎖”，螢幕解鎖完成。
分享
1、開啟電腦的iTunes應用軟體，如下圖所示。
2、進入iTunes的主程式介面，如下圖所示。
3、iPad關機，按住home鍵再用數據線與電腦連接，如下圖所示。
4、等待自動進入恢復模式，如下圖所示。
5、進入恢復模式之後點擊電腦上的“恢復”，如下圖所示。
6、等待恢復完成就解除停用了，如下圖所示。
不用電腦無法解除
iPad已停用有三種方式可以恢復，但都只能透過電腦恢復使用。
第一種：使用iCloud抹除密碼
1.在電腦上開啟iCloud，登入Apple ID。
2.點選上方「所有裝置」選擇需要抹除開機密碼的iPad裝置名稱。
3.點選“抹除iPad設備名稱”，即可抹除iPad開機密碼。 （iPad裡面資料也會同時抹掉，可以透過備份來復原）
注意：需要抹除密碼的iPad必須是連網狀態，否則無法進行抹除。
第二種：連接iTunes，恢復iPad。
1.關閉iPad，長按電源鍵關機。
2.開啟電腦上的iTunes，用數據線連接iPad與電腦。
3.長按iPad的電源鍵，出現白色的蘋果標誌後按住home鍵，等到iPad黑屏以後，馬上鬆開電源鍵，繼續長按home鍵，直到iTunes彈出對話框。
4.如果你的ipad是最新系統，可以直接選擇“恢復iPad”，如果你的iPad不是最新系統，選擇“恢復並更新”。
5.確認恢復，根據電腦螢幕上的iTunes提示，點擊下一步和同意選項，開始設備恢復。
6.恢復完成。 iPad恢復完成以後會自動還原為出廠設定。
注意：如果之前做過備份，可以透過iTunes或iCloud進行資料恢復，如果沒有做過備份，所有內容遺失，設備需要全部重新下載應用程式和設定。
第二種：使用瘋師傅蘋果密碼解鎖抹除iPad密碼（如果前兩種方法使用過都無法恢復停用，就可以藉助第三方專業軟體來進行恢復，操作也很簡單）
1.電腦下載瘋師傅蘋果密碼解鎖，安裝並運作。
2.選擇「解鎖螢幕密碼」模式，然後用數據線連接iPad與電腦。 （如果iPad無法辨識可以選擇開啟 iTunes 進行辨識）。
3.依照電腦螢幕提示，設定iPad為DFU或恢復模式。
4. Download firmware.
5. Click "Start Unlocking" to complete the screen unlocking.
First method: Use iCloud to erase password
1. Open iCloud on your computer and log in to your Apple ID.
2. Click "All Devices" at the top to select the name of the iPad device that needs to erase the power-on password.
3. Click "Erase iPad Device Name" to erase the iPad power-on password. (The data in the iPad will also be erased at the same time and can be restored through backup)
Note: The iPad whose password needs to be erased must be online, otherwise it cannot be erased.
Second option: Connect to iTunes and restore iPad.
1. Turn off the iPad and long press the power button to turn it off.
2. Open iTunes on the computer and connect the iPad to the computer with a data cable.
3. Press and hold the power button of the iPad. When the white Apple logo appears, press and hold the home button. After the iPad screen goes black, immediately release the power button and continue to press and hold the home button until the iTunes dialog box pops up.
4. If your iPad is the latest system, you can directly select "Restore iPad". If your iPad is not the latest system, select "Restore and Update".
5. Confirm the recovery, follow the iTunes prompts on the computer screen, click Next and agree to the option to start device recovery.
6. Recovery completed. After the iPad is restored, it will automatically be restored to factory settings.
Note: If you have done a backup before, you can restore the data through iTunes or iCloud. If you have not done a backup, all content will be lost, and the device will need to re-download all applications and settings.
Second: Use Crazy Master Apple password to unlock and erase iPad password (if the first two methods cannot be restored and deactivated, you can use third-party professional software to restore it, and the operation is also very simple)
1. Download Crazy Master Apple Password Unlocker on your computer, install and run it.
2. Select the "Unlock Screen Password" mode, and then connect the iPad to the computer with a data cable. (If the iPad cannot be recognized, you can choose to open iTunes for recognition).
3. Follow the computer screen prompts to set the iPad to DFU or recovery mode.
4. Download the firmware.
5. Click "Start Unlocking" to complete the screen unlocking.
There are three ways to restore the disabled iPad, but they can only be restored through the computer.
First method: Use iCloud to erase password
1. Open iCloud on your computer and log in to your Apple ID.
2. Click "All Devices" at the top to select the name of the iPad device that needs to erase the power-on password.
3. Click "Erase iPad Device Name" to erase the iPad power-on password. (The data in the iPad will also be erased at the same time and can be restored through backup)
Note: The iPad whose password needs to be erased must be online, otherwise it cannot be erased.
Second option: Connect to iTunes and restore iPad.
1. Turn off the iPad and long press the power button to turn it off.
2. Open iTunes on the computer and connect the iPad to the computer with a data cable.
3. Press and hold the power button of the iPad. When the white Apple logo appears, press and hold the home button. After the iPad screen goes black, immediately release the power button and continue to press and hold the home button until the iTunes dialog box pops up.
4. If your iPad is the latest system, you can directly select "Restore iPad". If your iPad is not the latest system, select "Restore and Update".
5. Confirm the recovery, follow the iTunes prompts on the computer screen, click Next and agree to the option to start device recovery.
6. Recovery completed. After the iPad is restored, it will automatically be restored to factory settings.
Note: If you have done a backup before, you can restore the data through iTunes or iCloud. If you have not done a backup, all content will be lost, and the device will need to re-download all applications and settings.
Second: Use Crazy Master Apple password to unlock and erase iPad password (if the first two methods cannot be restored and deactivated, you can use third-party professional software to restore it, and the operation is also very simple)
1. Download Crazy Master Apple Password Unlocker on your computer, install and run it.
2. Select the "Unlock Screen Password" mode, and then connect the iPad to the computer with a data cable. (If the iPad cannot be recognized, you can choose to open iTunes for recognition).
3. Follow the computer screen prompts to set the iPad to DFU or recovery mode.
4. Download the firmware.
5. Click "Start Unlocking" to complete the screen unlocking.
Use iTunes to unlock your iOS device.
1. Connect your iPhone or iPad to a notebook or desktop computer that you usually synchronize with.
2. After opening iTunes, make a backup first. Please click (Back Up Now) and iTunes will automatically synchronize the device and create a backup.
3. After the backup is completed, click the (Restore iPhone) button on the upper right to restore the device to its original factory settings.
4. Finally press (Restore Backup), select the most recent backup time, and wait for the device recovery backup to be completed.
Forgot your password: Method 2 - Use iCloud
1. On a notebook or desktop computer connected to your iPhone or iPad, open and log in to "iCloud".
2. Select "Find My iPhone" to find my iPhone APP.
3. When iCloud is remotely connected to an iOS device, its location will be displayed on the map, then click "Clear iPhone" in the device location option on the upper right, and follow the instructions to set it.
The prerequisite for using this method is that your iOS device has already turned on the "Find My iPhone" function. Here are the steps to enable this feature: Go to (Settings) > (Privacy) > (Location Services) > and turn on (Find My iPhone). And to (Settings)》》(Find My iPhone).
Forgot password: Method 3 - iOS device that has never been backed up
1. After connecting the iOS device to iTunes, the screen may display "iTunes cannot connect to the iOS device because It is locked with a passcode. You must enter a passcode on your iOS device to use it with iTunes." At this time, unplug the connection cable of the iOS device first, and then shut down the iPhone or iPad.
2. Then, keep pressing the "Home button" of the iPhone or iPad with one hand, and reconnect the cable to the iOS device with the other hand. The device will automatically turn on. Do not release the "Home Button" until the "Connect to iTunes" screen appears.
3. After iTunes pops up, the message "iTunes has detected an iOS device in recovery mode. To use it with iTunes, you must restore the iOS device." Please press " good".
4. Press "Restore" in iTunes to restore the iOS device.
The above method is easy to operate and can be applied to iOS devices such as iPad, iPhone and iPod.
1. Download the latest version of itunes on the computer, otherwise unknown errors may occur during reinstallation.
2. Connect the ipad to itunes, shut down the ipad, press and hold the HOME button and the power button at the same time for 10 seconds, release the power button, and continue to hold the home button until you see the recognition in DFU state on the computer. After the device or computer prompts, release the home button, select the recovery option button on itunes, and click to confirm recovery in the pop-up selection box.
3. Next, iTunes will pop up a page prompting that all content will be erased, and the recovery will be verified with the Apple server. When the verification and file extraction are completed, iTunes will automatically reinstall the downloaded files for the iPad. The firmware version is up, just wait for the installation to be successful and then reactivate the iPad.
Method to set iPad disabled without a computer:
The first method: enter DFU recovery normally
This recovery method is the most commonly used in our general unlocking tutorials How to restore iPad firmware.
1. Connect the iPad to the computer, then shut down the iPad
2. Press and hold the power button and home button at the same time
3. When you see the white Apple logo , please release the power button and continue to hold the home button.
4. Open iTunes, wait for it to prompt you to enter recovery mode, then hold down the shift key on the keyboard, click "Restore", and select the corresponding firmware to restore.
The second method: black screen and enter DFU recovery
1. Connect the iPad to the computer with a USB cable, and then you will hear a prompt sound that the computer has been connected successfully.
2. Now please turn off the iPad first, and then you will hear the prompt sound that the computer has not been connected successfully.
3. Please press and hold the power button and home button at the same time until the 10th second. Please release the power button immediately and continue to hold the home
button.
4. At this time, iTunes will automatically start and prompt you to enter recovery mode (the iPad will remain black screen). Then you can hold down the shift key on the keyboard, click "Restore", and select the corresponding firmware to restore
Cannot be deactivated without a computer
The iPad has been disabled. There are three ways to restore it, but they can only be restored through a computer.
First method: Use iCloud to erase password
1. Open iCloud on your computer and log in to your Apple ID.
2. Click "All Devices" at the top to select the name of the iPad device that needs to erase the power-on password.
3. Click "Erase iPad Device Name" to erase the iPad power-on password. (The data in the iPad will also be erased at the same time and can be restored through backup)
Note: The iPad whose password needs to be erased must be online, otherwise it cannot be erased.
Second option: Connect to iTunes and restore iPad.
1. Turn off the iPad and long press the power button to turn it off.
2. Open iTunes on the computer and connect the iPad to the computer with a data cable.
3. Press and hold the power button of the iPad. When the white Apple logo appears, press and hold the home button. After the iPad screen goes black, immediately release the power button and continue to press and hold the home button until the iTunes dialog box pops up.
4. If your iPad is the latest system, you can directly select "Restore iPad". If your iPad is not the latest system, select "Restore and Update".
5. Confirm the recovery, follow the iTunes prompts on the computer screen, click Next and agree to the option to start device recovery.
6. Recovery completed. After the iPad is restored, it will automatically be restored to factory settings.
Note: If you have done a backup before, you can restore the data through iTunes or iCloud. If you have not done a backup, all content will be lost, and the device will need to re-download all applications and settings.
Second: Use Crazy Master Apple Password to unlock and erase iPad password (if the first two methods cannot be restored and deactivated, you can use third-party professional software to restore it, and the operation is also very simple)
1. Download Crazy Master Apple Password Unlocker on your computer, install and run it.
2. Select the "Unlock Screen Password" mode, and then connect the iPad to the computer with a data cable. (If the iPad cannot be recognized, you can choose to open iTunes for recognition).
3. Follow the computer screen prompts to set the iPad to DFU or recovery mode.
4. Download the firmware.
5. Click "Start Unlocking" to complete the screen unlocking.
Cannot be deactivated without a computer
The iPad has been disabled. There are three ways to restore it, but they can only be restored through a computer.
First method: Use iCloud to erase password
1. Open iCloud on your computer and log in to your Apple ID.
2. Click "All Devices" at the top to select the name of the iPad device that needs to erase the power-on password.
3. Click "Erase iPad Device Name" to erase the iPad power-on password. (The data in the iPad will also be erased at the same time and can be restored through backup)
Note: The iPad whose password needs to be erased must be online, otherwise it cannot be erased.
Second option: Connect to iTunes and restore iPad.
1. Turn off the iPad and long press the power button to turn it off.
2. Open iTunes on the computer and connect the iPad to the computer with a data cable.
3. Press and hold the power button of the iPad. When the white Apple logo appears, press and hold the home button. After the iPad screen goes black, immediately release the power button and continue to press and hold the home button until the iTunes dialog box pops up.
4. If your iPad is the latest system, you can directly select "Restore iPad". If your iPad is not the latest system, select "Restore and Update".
5. Confirm the recovery, follow the iTunes prompts on the computer screen, click Next and agree to the option to start device recovery.
6. Recovery completed. After the iPad is restored, it will automatically be restored to factory settings.
Note: If you have done a backup before, you can restore the data through iTunes or iCloud. If you have not done a backup, all content will be lost, and the device will need to re-download all applications and settings.
Second: Use Crazy Master Apple password to unlock and erase iPad password (if the first two methods cannot be restored and deactivated, you can use third-party professional software to restore it, and the operation is also very simple)
1. Download Crazy Master Apple Password Unlocker on your computer, install and run it.
2. Select the "Unlock Screen Password" mode, and then connect the iPad to the computer with a data cable. (If the iPad cannot be recognized, you can choose to open iTunes for recognition).
3. Follow the computer screen prompts to set the iPad to DFU or recovery mode.
4. Download the firmware.
5. Click "Start Unlocking" to complete the screen unlocking.
以上是ipad停用不用電腦解開？的詳細內容。更多資訊請關注PHP中文網其他相關文章！
