頂級修復：驅動器字母本身更改＆C驅動器成為D

While browsing Windows forums, many users have reported the issue of the drive letter changed by itself. This can not only cause disk confusion but also lead to system boot failures if the C drive is reassigned to D or another letter. If you’re facing this problem, follow this MiniTool guide to find effective fixes.

Drive letters are alphabetical identifiers used by the Windows operating system to recognize storage devices, with each disk partition assigned a unique letter. However, some users have reported that their drive letter changed by itself, especially after a system restart or when reconnecting an external disk.

This unexpected reassignment of the drive letter may lead to broken shortcuts, software errors, or other issues. In more severe cases, many users have found that their C drive has been assigned a different letter, making the system unbootable.

This article provides targeted solutions for both situations. You can follow the fixes based on your specific case.

Case 1: Drive Letter of Data Disk Changed by Itself

Fix 1. Change the Drive Letter Back in Disk Management

Sometimes, a drive letter may change automatically due to a one-time glitch caused by a Windows update or other errors. You can fix this by manually reassigning the original drive letter in Disk Management.

Step 1. Right-click the Start button and choose Disk Management.

Step 2. Right-click the target disk partition and choose Change Drive Letter and Paths.

Step 3. In the new window, click Change. Next, select a drive letter from the drop-down menu and hit OK.

If Disk Management is not saving drive letter changes, you may consider using third-party disk management software to change the drive letter. Among these tools, MiniTool Partition Wizard is highly recommended as it is safe and trusted by many users. It is free to change the drive letter with this tool.

Step 1. Download MiniTool Partition Wizard free and launch it.

Step 2. On the home page of this tool, select the partition in the right panel, scroll down the left menu bar, and click Change Drive Letter. When the new small window pops up, select an available drive letter and click OK.

Step 3. Click Apply in the bottom left corner.

Fix 2. Check if Any External Devices Are Causing Interference

If the drive letter keeps changing, check if there is any external disk connected to your computer. Occasionally, external devices may conflict with existing drives because Windows automatically assigns drive letters to newly connected storage devices.

So, you can unplug unnecessary disks from your computer and check if the problem can be fixed.

Case 2: C Drive Changed to D, Windows Won’t Boot

Fix 1. Assign the Drive Letter With CMD

If the system fails to boot due to drive letter changes, you can boot into WinRE and use the Command Prompt to reassign the correct drive letter. Here I take ASUS for example.

Step 1. Press and hold the F9/F12 key, then press the Power button.

Step 2. When you see the blue WinRE window, click Troubleshoot > Advanced options > Command Prompt.  

Step 3. In the Command Prompt window, type the following command lines one by one, and press Enter after each command.

Tips:

Since the letter C has been incorrectly assigned to the D drive, you first need to change the drive currently using C (which is actually the D drive) to another non-conflicting letter, such as Z. Then, reassign the D drive (which was originally the C drive) back to C.

• diskpart
• list disk
• select disk x (x represents the disk number where the current C drive is located)
• list partition
• select partition x (x represents the current C drive number)
• assign letter x: (x represents a letter that is neither C nor D nor any other occupied letter)

Step 4. Duplicate the steps to reassign the D drive back to C.

Fix 2. Repair the System Partition

The system partition may have been corrupted due to the drive letter confusion process. In this case, you may need to use BCDBoot to recreate the system partition files.

Step 1. Access the Command Prompt window from WinRE.

Step 2. Execute the following command lines to determine which drive letter contains your Windows partition and system partition.

• diskpart
• list vol
• exit

Step 3. Type bcdboot x:\Windows (x represents the drive letter of your Windows partition) and press Enter to add a boot entry for your Windows partition.

Step 4. Restart your computer and check if the drive letter and system are back to normal.

Tips:

If Windows won’t boot at all, you may need to urgently recover your files and reinstall Windows. MiniTool Power Data Recovery offers a bootable edition, which allows you to create a bootable disk and safely transfer computer data. You can download the free edition of this software and then register it to the bootable edition to recover files.  

Can You Stop Windows From Changing the Drive Letter of a USB Drive?

Some users have reported that the drive letter of their USB drive or other removable disk changes automatically after reconnecting to the computer. This is normal because Windows releases the drive letter once the disk is disconnected, making it available for reassignment. Typically, there is no way to prevent Windows from doing this.

Bottom Line

How to fix the problem of “drive letter changed by itself” on Windows? The possible solutions for different scenarios are summarized above. Follow the step-by-step instructions to resolve the issue.

以上是頂級修復：驅動器字母本身更改＆C驅動器成為D的詳細內容。更多資訊請關注PHP中文網其他相關文章！