MYSQL每隔10分鐘進行分組統計的實作方法

Mysql關係型資料庫管理系統

MySQL是一個開放式原始碼的小型關聯式資料庫管理系統，開發者為瑞典MySQL AB公司。 MySQL被廣泛地應用在Internet上的中小型網站。由於其體積小、速度快、總體擁有成本低，尤其是開放原始碼這一特點，許多中小型網站為了降低網站總體擁有成本而選擇了MySQL作為網站資料庫。

這篇文章主要給大家介紹瞭如何利用MYSQL實現每隔10分鐘進行分組統計的方法，文中給出了詳細的示例代碼，相信對大家的理解和學習具有一定的參考借鑒價值，有需要的朋友們下面來一起看看吧。

前言

本文的內容主要是介紹了MYSQL每隔10分鐘進行分組統計的實現方法，在畫用戶登錄、操作情況在一天內的分佈圖時會非常有用，之前我只知道用“存儲過程」實現的方法（雖然執行速度快，但真的是太不靈活了），後來學會了用高階點的「group by」方法來靈活實現類似功能。

正文：

-- time_str '2016-11-20 04:31:11'
-- date_str 20161120

select concat(left(date_format(time_str, '%y-%m-%d %h:%i'),15),'0') as time_flag, count(*) as count from `security`.`cmd_info` where `date_str`=20161120 
group by time_flag order by time_flag; -- 127 rows

select round(unix_timestamp(time_str)/(10 * 60)) as timekey, count(*) from `security`.`cmd_info` where `date_str`=20161120 group by timekey 
order by timekey; -- 126 rows

-- 以上2个SQL语句的思路类似——使用「group by」进行区分，但是方法有所不同，前者只能针对10分钟(或1小时)级别，后者可以动态调整间隔大小，两者效率差不多，
可以根据实际情况选用

select concat(date(time_str),' ',hour(time_str),':',round(minute(time_str)/10,0)*10), count(*) from `security`.`cmd_info` where `date_str`=20161120 
group by date(time_str), hour(time_str), round(minute(time_str)/10,0)*10; -- 145 rows

select concat(date(time_str),' ',hour(time_str),':',floor(minute(time_str)/10)*10), count(*) from `security`.`cmd_info` where `date_str`=20161120 
group by date(time_str), hour(time_str), floor(minute(time_str)/10)*10; -- 127 rows (和 date_format 那个等价)

select concat(date(time_str),' ',hour(time_str),':',ceil(minute(time_str)/10)*10), count(*) from `security`.`cmd_info` where `date_str`=20161120 
group by date(time_str), hour(time_str), ceil(minute(time_str)/10)*10; -- 151 rows

&

DELIMITER //

DROP PROCEDURE IF EXISTS `usp_cmd_info`;

CREATE PROCEDURE `usp_cmd_info`(IN dates VARCHAR(12))
BEGIN
 SELECT count(*) from `cmd_info` where `time_str` BETWEEN CONCAT(dates, " 00:00:00") AND CONCAT(dates, " 00:10:00") 
 INTO @count_0;
 SELECT count(*) from `cmd_info` where `time_str` BETWEEN CONCAT(dates, " 00:10:00") AND CONCAT(dates, " 00:20:00") 
 INTO @count_1;
 ...
 SELECT count(*) from `cmd_info` where `time_str` BETWEEN CONCAT(dates, " 23:40:00") AND CONCAT(dates, " 23:50:00") 
 INTO @count_142;
 SELECT count(*) from `cmd_info` where `time_str` BETWEEN CONCAT(dates, " 23:50:00") AND CONCAT(dates, " 23:59:59") 
 INTO @count_143;
 select @count_0, @count_1, @count_2, @count_3, @count_4, @count_5, @count_6, @count_7, @count_8, @count_9, @count_10, 
 @count_11, @count_12, @count_13, @count_14, @count_15, @count_16, @count_17, @count_18, @count_19, @count_20, @count_21, 
 @count_22, @count_23, @count_24, @count_25, @count_26, @count_27, @count_28, @count_29, @count_30, @count_31, @count_32, 
 @count_33, @count_34, @count_35, @count_36, @count_37, @count_38, @count_39, @count_40, @count_41, @count_42, @count_43, 
 @count_44, @count_45, @count_46, @count_47, @count_48, @count_49, @count_50, @count_51, @count_52, @count_53, @count_54, 
 @count_55, @count_56, @count_57, @count_58, @count_59, @count_60, @count_61, @count_62, @count_63, @count_64, @count_65, 
 @count_66, @count_67, @count_68, @count_69, @count_70, @count_71, @count_72, @count_73, @count_74, @count_75, @count_76, 
 @count_77, @count_78, @count_79, @count_80, @count_81, @count_82, @count_83, @count_84, @count_85, @count_86, @count_87,
  @count_88, @count_89, @count_90, @count_91, @count_92, @count_93, @count_94, @count_95, @count_96, @count_97, @count_98, 
  @count_99, @count_100, @count_101, @count_102, @count_103, @count_104, @count_105, @count_106, @count_107, @count_108, 
  @count_109, @count_110, @count_111, @count_112, @count_113, @count_114, @count_115, @count_116, @count_117, @count_118, 
  @count_119, @count_120, @count_121, @count_122, @count_123, @count_124, @count_125, @count_126, @count_127, @count_128, 
  @count_129, @count_130, @count_131, @count_132, @count_133, @count_134, @count_135, @count_136, @count_137, @count_138, 
  @count_139, @count_140, @count_141, @count_142, @count_143;
END //

DELIMITER ;

show PROCEDURE status\G

CALL usp_cmd_info("2016-10-20");
上面的这段MySQL存储过程的语句非常长，不可能用手工输入，可以用下面的这段Python代码按所需的时间间隔自动生成：
import datetime

today = datetime.date.today()
# 或 由给定格式字符串转换成
# today = datetime.datetime.strptime('2016-11-21', '%Y-%m-%d')

min_today_time = datetime.datetime.combine(today, datetime.time.min) # 2016-11-21 00:00:00
max_today_time = datetime.datetime.combine(today, datetime.time.max) # 2016-11-21 23:59:59

sql_procedure_arr = []
sql_procedure_arr2 = []
for x in xrange(0, 60*24/5, 1):
  start_datetime = min_today_time + datetime.timedelta(minutes = 5*x)
  end_datetime = min_today_time + datetime.timedelta(minutes = 5*(x+1))
  # print x, start_datetime.strftime("%Y-%m-%d %H:%M:%S"), end_datetime.strftime("%Y-%m-%d %H:%M:%S")
  select_str = 'SELECT count(*) from `cmd_info` where `time_str` BETWEEN "{0}" AND "{1}" INTO @count_{2};'.format(start_datetime, end_datetime, x)
  # print select_str
  sql_procedure_arr.append(select_str)
  sql_procedure_arr2.append('@count_{0}'.format(x))
print '\n'.join(sql_procedure_arr)
print 'select {0};'.format(', '.join(sql_procedure_arr2))

總結

以上就是MYSQL每隔10分鐘進行分組統計的實現方法的全部內容了，更多相關內容請關注PHP中文網（www.php.cn）！