nginx安裝vsftpd遇到的問題怎麼解決
最簡潔的安裝步驟
[root@itdragon ~]# useradd ftpuser [root@itdragon ~]# passwd ftpuser changing password for user ftpuser. new password: bad password: it is too short bad password: is too simple retype new password: passwd: all authentication tokens updated successfully. [root@itdragon ~]# yum -y install vsftpd [root@itdragon ~]# ifconfig
第一步:新增ftp使用者
第二步:設定ftp使用者密碼
第三步:安裝vsftpd
第四步:查看ip位址
第五步:本機使用免費的filezilla 連結虛擬機器
#遇到的問題
状态: 正在等待重试... 状态: 正在连接 192.168.0.11:21... 错误: 20 秒后无活动,连接超时 错误: 无法连接到服务器
##第三個操作是修改selinux,開啟外網可存取
[root@itdragon ~]# vim /etc/vsftpd/vsftpd.conf anonymous_enable=no pasv_min_port=30000 pasv_max_port=31000 [root@itdragon ~]# service vsftpd restart [root@itdragon ~]# vim /etc/sysconfig/iptables -a input -p tcp -m multiport --dport 20,21 -m state --state new -j accept -a input -p tcp -m state --state new -m tcp --dport 21 -j accept -a input -p tcp --dport 30000:31000 -j accept [root@itdragon ~]# service iptables restart [root@itdragon ~]# getsebool -a | grep ftp allow_ftpd_anon_write --> off allow_ftpd_full_access --> off allow_ftpd_use_cifs --> off allow_ftpd_use_nfs --> off ftp_home_dir --> off ftpd_connect_db --> off ftpd_use_fusefs --> off ftpd_use_passive_mode --> off httpd_enable_ftp_server --> off tftp_anon_write --> off tftp_use_cifs --> off tftp_use_nfs --> off [root@itdragon ~]# setsebool -p allow_ftpd_full_access on [root@itdragon ~]# setsebool -p ftp_home_dir on
暫時關閉防火牆不過癮,直接永久關閉防火牆
[root@itdragon modprobe.d]# service iptables stop iptables: setting chains to policy accept: filter [ ok ] iptables: flushing firewall rules: [ ok ] iptables: unloading modules: [ ok ] [root@itdragon modprobe.d]# chkconfig iptables off
在nginx 安裝目錄下建立了一個images資料夾,透過filezilla上傳圖片提示錯誤
响应:553 could not create file. 错误: 严重文件传输错误
解決方法如下
[root@itdragon html]# mkdir images [root@itdragon html]# chmod -r 777 images [root@itdragon html]# ll total 12 -rw-r--r--. 1 root root 537 nov 18 10:53 50x.html drwxrwxrwx. 2 root root 4096 nov 18 10:55 images -rw-r--r--. 1 root root 612 nov 18 10:53 index.html [root@itdragon html]# vim /etc/vsftpd/vsftpd.conf local_root=/var/ftp [root@itdragon html]# service vsftpd restart
注意點
##網路要能ping通
防火牆的問題要處理好
不能建立檔案問題
以上是nginx安裝vsftpd遇到的問題怎麼解決的詳細內容。更多資訊請關注PHP中文網其他相關文章!

熱AI工具

Undresser.AI Undress
人工智慧驅動的應用程序,用於創建逼真的裸體照片

AI Clothes Remover
用於從照片中去除衣服的線上人工智慧工具。

Undress AI Tool
免費脫衣圖片

Clothoff.io
AI脫衣器

Video Face Swap
使用我們完全免費的人工智慧換臉工具,輕鬆在任何影片中換臉!

熱門文章

熱工具

記事本++7.3.1
好用且免費的程式碼編輯器

SublimeText3漢化版
中文版,非常好用

禪工作室 13.0.1
強大的PHP整合開發環境

Dreamweaver CS6
視覺化網頁開發工具

SublimeText3 Mac版
神級程式碼編輯軟體(SublimeText3)

可以通過以下步驟查詢 Docker 容器名稱:列出所有容器(docker ps)。篩選容器列表(使用 grep 命令)。獲取容器名稱(位於 "NAMES" 列中)。

如何在 Windows 中配置 Nginx?安裝 Nginx 並創建虛擬主機配置。修改主配置文件並包含虛擬主機配置。啟動或重新加載 Nginx。測試配置並查看網站。選擇性啟用 SSL 並配置 SSL 證書。選擇性設置防火牆允許 80 和 443 端口流量。

確認 Nginx 是否啟動的方法:1. 使用命令行:systemctl status nginx(Linux/Unix)、netstat -ano | findstr 80(Windows);2. 檢查端口 80 是否開放;3. 查看系統日誌中 Nginx 啟動消息;4. 使用第三方工具,如 Nagios、Zabbix、Icinga。

Docker 容器啟動步驟:拉取容器鏡像:運行 "docker pull [鏡像名稱]"。創建容器:使用 "docker create [選項] [鏡像名稱] [命令和參數]"。啟動容器:執行 "docker start [容器名稱或 ID]"。檢查容器狀態:通過 "docker ps" 驗證容器是否正在運行。

在雲服務器上配置 Nginx 域名的方法:創建 A 記錄,指向雲服務器的公共 IP 地址。在 Nginx 配置文件中添加虛擬主機塊,指定偵聽端口、域名和網站根目錄。重啟 Nginx 以應用更改。訪問域名測試配置。其他注意事項:安裝 SSL 證書啟用 HTTPS、確保防火牆允許 80 端口流量、等待 DNS 解析生效。

可以查詢 Nginx 版本的方法有:使用 nginx -v 命令;查看 nginx.conf 文件中的 version 指令;打開 Nginx 錯誤頁,查看頁面的標題。

在 Docker 中創建容器: 1. 拉取鏡像: docker pull [鏡像名] 2. 創建容器: docker run [選項] [鏡像名] [命令] 3. 啟動容器: docker start [容器名]

啟動 Nginx 服務器需要按照不同操作系統採取不同的步驟:Linux/Unix 系統:安裝 Nginx 軟件包(例如使用 apt-get 或 yum)。使用 systemctl 啟動 Nginx 服務(例如 sudo systemctl start nginx)。 Windows 系統:下載並安裝 Windows 二進製文件。使用 nginx.exe 可執行文件啟動 Nginx(例如 nginx.exe -c conf\nginx.conf)。無論使用哪種操作系統,您都可以通過訪問服務器 IP
