mysql官方关于2013和2006错误代码产生原因和解决方案_MySQL
一、错误代码
Error: 2013 (CR_SERVER_LOST)
Message: Lost connection to MySQL server during query
Error: 2006 (CR_SERVER_GONE_ERROR)
Message: MySQL server has gone away
二、错误代码原因
错误代码
描述
CR_SERVER_GONE_ERROR
客户端无法向服务器发送请求
CR_SERVER_LOST
当向服务器写入时无法获取错误,但无法获取请求的完整应答。
主要原因和解决办法:
By default, the server closes the connection after eight hours if nothing has happened. You can change the time limit by setting the wait_timeout variable when you start mysqld.
默认服务器在8小时后关闭连接,可以通过参数wait_timeout,然后重启mysqld服务来修改默认值。
If you have a cript:, you just have to issue the query again for the client to do an automatic reconnection. This assumes that you have automatic reconnection in the client enabled (which is the default for the mysql command-line client).
如果你使用脚本,你只能在客户端重新连接再查询。这种情况你必须打开客户端重连接。
Some other common reasons for the MySQL server has gone away error are:
引起MySQL server has gone away错误的其它常见原因:
You (or the db administrator) has killed the running thread with a KILL statement or a mysqladmin kill command. 人为杀掉查询进程。
You tried to run a query after closing the connection to the server. This indicates a logic error in the application that should be corrected. 服务器关闭连接后,试图向服务器发送查询,这表明必须修改应用逻辑错误。
A client application running on a different host does not have the necessary privileges to connect to the MySQL server from that host. 客户端应用运行不同主机,连接至 mysql的主机没有必要的权限。
You got a timeout from the TCP/IP connection on the client side. This may happen if you have been using the commands: mysql_options(..., MYSQL_OPT_READ_TIMEOUT,...) or mysql_options(..., MYSQL_OPT_WRITE_TIMEOUT,...). In this case increasing the timeout may help solve the problem. 客户端TCP/IP连接超时,这可能是使用了mysql选项引起的,这种情况增加超时时间可以帮助解决问题。
You have encountered a timeout on the server side and the automatic reconnection in the client is disabled (the reconnect flag in the MYSQL structure is equal to 0). 服务器端连接超时和客户端自动重连被关闭
You are using a Windows client and the server had dropped the connection (probably because wait_timeout expired) before the command was issued.
如果你使用Windows客户端,命令发送前服务器就已经删除连接(可能是因为wait_timeout已经过期)
The problem on Windows is that in some cases MySQL doesn't get an error from the OS when writing to the TCP/IP connection to the server, but instead gets the error when trying to read the answer from the connection.
在windows平台,一些情况是MySQL通过TCP/IP连接至服务器时无法从系统级获取错误,而是当从连接试图读取应答时获取错误。
Prior to MySQL 5.1.8, even if the reconnect flag in the MYSQL structure is equal to 1, MySQL does not automatically reconnect and re-issue the query as it doesn't know if the server did get the original query or not.
在5.18以前的版本,尽管重连标志在mysql架构是1,但mysql不能自动重连和重新执行查询,因为它不知道服务器获取的查询是否是原始发送的。
The solution to this is to either do a mysql_ping() on the connection if there has been a long time since the last query (this is what MyODBC does) or set wait_timeout on the mysqld server so high that it in practice never times out.
这种情况的解决方案就是用mysql_ping()连接确认自上次以为是否有长时间查询(MyODBC原理)。或者设置wait_timeout参数为很高的值,使连接不可能超时。
You can also get these errors if you send a query to the server that is incorrect or too large. If mysqld receives a packet that is too large or out of order, it assumes that something has gone wrong with the client and closes the connection. If you need big queries (for example, if you are working with big BLOB columns), you can increase the query limit by setting the server's max_allowed_packet variable, which has a default value of 1MB. You may also need to increase the maximum packet size on the client end.
向服务器发送不正确或者太大的查询也会导致这种错误。如果mysqld收到的包太大或者无序,它就认为客户端发生错误而断开连接。如果需要大查询,可以修改max_allowed_packet变量,该变量默认值是1M。在客户端也需要设置最大包的大小。
An INSERT or REPLACE statement that inserts a great many rows can also cause these sorts of errors. Either one of these statements sends a single request to the server irrespective of the number of rows to be inserted; thus, you can often avoid the error by reducing the number of rows sent per INSERT or REPLACE.
INSERT or REPLACE语句插入大量的行也会引起这种错误。这些语句不考虑插入的行数而发送单一的请求至服务器。因此,减少插入的行数可以避免经常发生这种错误。
You also get a lost connection if you are sending a packet 16MB or larger if your client is older than 4.0.8 and your server is 4.0.8 and above, or the other way around.
如果客户端是4.0.8以前的版本而服务器是4.0.8以上的版本,当你发送16M以上的包时也会断开连接
It is also possible to see this error if host name lookups fail (for example, if the DNS server on which your server or network relies goes down). This is because MySQL is dependent on the host system for name resolution, but has no way of knowing whether it is working — from MySQL's point of view the problem is indistinguishable from any other network timeout.
如果解析主机名失败也可能看到这种错误。这是因为mysql依赖于主机系统解析主机名,但无法知道它是否有效。以mysql观点来看,在任何网络超时中这种情况都是不易察觉的。
You may also see the MySQL server has gone away error if MySQL is started with the --skip-networking option.
可以尝试使用--skip-networking来启动mysql.
Another networking issue that can cause this error occurs if the MySQL port (default 3306) is blocked by your firewall, thus preventing any connections at all to the MySQL server.
其中网络问题也会导致这种情况,如果mysql 3306端口被防火墙阻塞,就阻止了连接到mysql的任何连接。
You can also encounter this error with applications that fork child processes, all of which try to use the same connection to the MySQL server. This can be avoided by using a separate connection for each child process.
如果应用产生子进程,所有子进程都试图使用同样的连接至mysql服务器,也同样会出现这种错误。可以把不同的子进程用不同的连接来避免这种问题。
You have encountered a bug where the server died while executing the query.
执行查询时,服务器进程已经死掉,这是遇到的bug.
You can check whether the MySQL server died and restarted by executing mysqladmin version and examining the server's uptime. If the client connection was broken because mysqld crashed and restarted, you should concentrate on finding the reason for the crash. Start by checking whether issuing the query again kills the server again.
你可以检查mysql服务是否已经死掉,执行重启和检查服务器启动时间。如果客户端连接中断是因为mysqld崩溃和重启,可以集中查找mysql崩溃的原因。

熱AI工具

Undresser.AI Undress
人工智慧驅動的應用程序,用於創建逼真的裸體照片

AI Clothes Remover
用於從照片中去除衣服的線上人工智慧工具。

Undress AI Tool
免費脫衣圖片

Clothoff.io
AI脫衣器

Video Face Swap
使用我們完全免費的人工智慧換臉工具,輕鬆在任何影片中換臉!

熱門文章

熱工具

記事本++7.3.1
好用且免費的程式碼編輯器

SublimeText3漢化版
中文版,非常好用

禪工作室 13.0.1
強大的PHP整合開發環境

Dreamweaver CS6
視覺化網頁開發工具

SublimeText3 Mac版
神級程式碼編輯軟體(SublimeText3)

MySQL是一個開源的關係型數據庫管理系統。 1)創建數據庫和表:使用CREATEDATABASE和CREATETABLE命令。 2)基本操作:INSERT、UPDATE、DELETE和SELECT。 3)高級操作:JOIN、子查詢和事務處理。 4)調試技巧:檢查語法、數據類型和權限。 5)優化建議:使用索引、避免SELECT*和使用事務。

MySQL在Web應用中的主要作用是存儲和管理數據。 1.MySQL高效處理用戶信息、產品目錄和交易記錄等數據。 2.通過SQL查詢,開發者能從數據庫提取信息生成動態內容。 3.MySQL基於客戶端-服務器模型工作,確保查詢速度可接受。

InnoDB使用redologs和undologs確保數據一致性和可靠性。 1.redologs記錄數據頁修改,確保崩潰恢復和事務持久性。 2.undologs記錄數據原始值,支持事務回滾和MVCC。

MySQL是一種開源的關係型數據庫管理系統,主要用於快速、可靠地存儲和檢索數據。其工作原理包括客戶端請求、查詢解析、執行查詢和返回結果。使用示例包括創建表、插入和查詢數據,以及高級功能如JOIN操作。常見錯誤涉及SQL語法、數據類型和權限問題,優化建議包括使用索引、優化查詢和分錶分區。

MySQL在數據庫和編程中的地位非常重要,它是一個開源的關係型數據庫管理系統,廣泛應用於各種應用場景。 1)MySQL提供高效的數據存儲、組織和檢索功能,支持Web、移動和企業級系統。 2)它使用客戶端-服務器架構,支持多種存儲引擎和索引優化。 3)基本用法包括創建表和插入數據,高級用法涉及多表JOIN和復雜查詢。 4)常見問題如SQL語法錯誤和性能問題可以通過EXPLAIN命令和慢查詢日誌調試。 5)性能優化方法包括合理使用索引、優化查詢和使用緩存,最佳實踐包括使用事務和PreparedStatemen

選擇MySQL的原因是其性能、可靠性、易用性和社區支持。 1.MySQL提供高效的數據存儲和檢索功能,支持多種數據類型和高級查詢操作。 2.採用客戶端-服務器架構和多種存儲引擎,支持事務和查詢優化。 3.易於使用,支持多種操作系統和編程語言。 4.擁有強大的社區支持,提供豐富的資源和解決方案。

MySQL与其他编程语言相比,主要用于存储和管理数据,而其他语言如Python、Java、C 则用于逻辑处理和应用开发。MySQL以其高性能、可扩展性和跨平台支持著称,适合数据管理需求,而其他语言在各自领域如数据分析、企业应用和系统编程中各有优势。

MySQL索引基数对查询性能有显著影响:1.高基数索引能更有效地缩小数据范围,提高查询效率;2.低基数索引可能导致全表扫描,降低查询性能;3.在联合索引中,应将高基数列放在前面以优化查询。
