©
本文檔使用 php中文網手册 發布
(PHP 4, PHP 5)
snmpset — 设置一个 SNMP 对象
$hostname
, string $community
, string $object_id
, string $type
, mixed $value
[, int $timeout
[, int $retries
]] )
设置指定的 SNMP 对象的值,成功返回 TRUE
,错误则返回 FALSE
。
函数 snmpset() 用于设置由
object_id
指定的 SNMP
对象的值。hostname
指定 SNMP 代理,而 community
参数指定具有读权限的域。
[#1] ch at lathspell dot de [2010-01-13 06:22:00]
Note that there are two ways to set a variable of the type BITS like e.g.:
SYNTAX BITS {telnet(0), ftp(1), http(2), icmp(3), snmp(4), ssh(5), https(6)}
1. Using type "b" and a list of bit numbers like:
snmpset('FOO-MIB::bar.42', 'b', '0 1 2 3 4');
with the disadvantage that the success is not easily verifyable as an snmpget() for the same OID would return e.g. 0xF8.
2. Using type "x" and a hex number but without(!) the usual "0x" prefix:
snmpset('FOO-MIB::bar.42', 'x', 'F0');
[#2] tridman [2007-04-19 07:19:32]
If you have importet the MIB-Files into the MIB Tree with "snmp_read_mib" you may use '=' as the "type" parameter.
In this case the type will also be taken from the loaded mib file. (Octest strings will be interpreted like strings though)
Comes in handy for a more dynamic use of snmpset.
[#3] deivis dot jakstas at gmail dot com [2006-12-28 06:53:06]
If you setting hex values correct format is:
snmpset($source_ip,$community,"$oid","x","10 10 10 10");
[#4] slawrance at technologist dot com [1999-07-21 00:01:18]
The "type" parameter must be one of the following, depending on the type of variable to set on the SNMP host:
i INTEGER
u unsigned INTEGER
t TIMETICKS
a IPADDRESS
o OBJID
s STRING
x HEX STRING
d DECIMAL STRING
n NULLOBJ
b BITS
If OPAQUE_SPECIAL_TYPES was defined while compiling the SNMP library, the
following are also valid:
U unsigned int64
I signed int64
F float
D double
As an example, using "i" would set an integer, and "s" would set a string. If the SNMP host rejects the data type, you might get the following message: "Warning: Error in packet. Reason: (badValue) The value given has the wrong type or length."
If you specify an unknown or invalid OID, you might get a "Could not add variable" message. When specifying an absolute OID (one that is already resolved) that is completely numeric, prepend it with a period. For example, an OID that could enable/disable Ethernet ports on an Asante hub might be "1.3.6.1.2.1.22.1.3.1.1.3.6.4.0", but you would need to use ".1.3.6.1.2.1.22.1.3.1.1.3.6.4.0" in the OID parameter so that the SNMP library won't try to resolve an already resolved OID. Friendly, unresolved OIDs do not need the period prepended, such as "system.SysContact.0"