©
本文檔使用 php中文網手册 發布
(PHP 5 >= 5.3.0, PHP 7)
DateInterval::format — Formats the interval
$format
)Formats the interval.
format
format character | Description | Example values |
---|---|---|
% | Literal % | % |
Y | Years, numeric, at least 2 digits with leading 0 | 01, 03 |
y | Years, numeric | 1, 3 |
M | Months, numeric, at least 2 digits with leading 0 | 01, 03, 12 |
m | Months, numeric | 1, 3, 12 |
D | Days, numeric, at least 2 digits with leading 0 | 01, 03, 31 |
d | Days, numeric | 1, 3, 31 |
a | Total number of days as a result of a DateTime::diff() or (unknown) otherwise | 4, 18, 8123 |
H | Hours, numeric, at least 2 digits with leading 0 | 01, 03, 23 |
h | Hours, numeric | 1, 3, 23 |
I | Minutes, numeric, at least 2 digits with leading 0 | 01, 03, 59 |
i | Minutes, numeric | 1, 3, 59 |
S | Seconds, numeric, at least 2 digits with leading 0 | 01, 03, 57 |
s | Seconds, numeric | 1, 3, 57 |
R | Sign "-" when negative, "+" when positive | -, + |
r | Sign "-" when negative, empty when positive | -, |
Returns the formatted interval.
Note:
The DateInterval::format() method does not recalculate carry over points in time strings nor in date segments. This is expected because it is not possible to overflow values like "32 days" which could be interpreted as anything from "1 month and 4 days" to "1 month and 1 day".
Example #1 DateInterval example
<?php
$interval = new DateInterval ( 'P2Y4DT6H8M' );
echo $interval -> format ( '%d days' );
?>
以上例程会输出:
4 days
Example #2 DateInterval and carry over points
<?php
$interval = new DateInterval ( 'P32D' );
echo $interval -> format ( '%d days' );
?>
以上例程会输出:
32 days
Example #3 DateInterval and DateTime::diff() with the %a and %d modifiers
<?php
$january = new DateTime ( '2010-01-01' );
$february = new DateTime ( '2010-02-01' );
$interval = $february -> diff ( $january );
// %a will output the total number of days.
echo $interval -> format ( '%a total days' ). "\n" ;
// While %d will only output the number of days not already covered by the
// month.
echo $interval -> format ( '%m month, %d days' );
?>
以上例程会输出:
31 total days 1 month, 0 days
[#1] me at unreal4u dot com [2015-10-09 10:33:19]
If you want the difference between two timestamps in HOURS, do not forget to add the number of days:
<?php
// Bad example
$lastEntryDate = new \DateTime('2015-05-23 00:10:20', new \DateTimeZone('UTC'));
$dateDifference = $lastEntryDate->diff(new \DateTime('2015-05-25 02:35:45', new \DateTimeZone('UTC')));
var_dump((int)$dateDifference->format('%H'));
// Returns 2
if ((int)$dateDifference->format('%H') > 24) {
// Will never enter here, (int)$dateDifference->format('%H') will contain 0-23 ONLY
}
?>
Instead, sum the days:
<?php
// Bad example
$lastEntryDate = new \DateTime('2015-05-23 00:10:20', new \DateTimeZone('UTC'));
$dateDifference = $lastEntryDate->diff(new \DateTime('2015-05-25 02:35:45', new \DateTimeZone('UTC')));
var_dump(($dateDifference->days * 24 + (int)$dateDifference->format('%H')));
// Returns 50
if (($dateDifference->days * 24 + (int)$dateDifference->format('%H')) > 24) {
// Will enter here now :)
}
?>
Hope this saves somebody some time and possible bugs :)
[#2] kulakov74 at yandex dot ru [2014-01-25 21:24:54]
glavic, this does not eliminate the problem of "32 days", if you use your class for normalizing intervals of days, because the result will depend on the current month which is used for DateTime by default. And if that does not matter (because the interval is not that long) you don't have to call diff() to get the same recalculation:
$DT=new DateTime('0000-01-01'); $DT->add($oInt); echo($DT->format('Y-m-d H:i:s'));
[#3] glavic at gmail dot com [2013-09-12 10:58:53]
How to easy recalculate carry over points:
<?php
class DateIntervalEnhanced extends DateInterval {
public function recalculate()
{
$from = new DateTime;
$to = clone $from;
$to = $to->add($this);
$diff = $from->diff($to);
foreach ($diff as $k => $v) $this->$k = $v;
return $this;
}
}
$di = new DateIntervalEnhanced('PT3600S');
echo "Instead of " . $di->format('%h:%i:%s') . " it outputs " . $di->recalculate()->format('%h:%i:%s');
# output will be: "Instead of 0:0:3600 it outputs 1:0:0"
[#4] beowolve at gmail dot com [2013-07-03 10:13:56]
German Version of formatDateDiff:
function formatDateDiff($start, $end=null) {
if(!($start instanceof DateTime)) {
$start = new DateTime($start);
}
if($end === null) {
$end = new DateTime();
}
if(!($end instanceof DateTime)) {
$end = new DateTime($start);
}
$interval = $end->diff($start);
$doPlural = function($nb,$str){
if ($nb > 1) {
switch ($str) {
case 'Jahr':
case 'Monat':
case 'Tag':
return $str.'e';
case 'Stunde':
case 'Minute':
case 'Sekunde':
return $str.'n';
}
} else
return $str;
}; // adds plurals
$format = array();
if($interval->y !== 0) {
$format[] = "%y ".$doPlural($interval->y, "Jahr");
}
if($interval->m !== 0) {
$format[] = "%m ".$doPlural($interval->m, "Monat");
}
if($interval->d !== 0) {
$format[] = "%d ".$doPlural($interval->d, "Tag");
}
if($interval->h !== 0) {
$format[] = "%h ".$doPlural($interval->h, "Stunde");
}
if($interval->i !== 0) {
$format[] = "%i ".$doPlural($interval->i, "Minute");
}
if($interval->s !== 0) {
$format[] = "%s ".$doPlural($interval->s, "Sekunde");
}
if(count($format)==0 || (count($format)==1 && $interval->s !== 0)) {
return "weniger als eine Minute";
}
// We use the two biggest parts
if(count($format) > 1) {
$format = array_shift($format).", ".array_shift($format);
} else {
$format = array_pop($format);
}
// Prepend 'since ' or whatever you like
return $interval->format($format);
}
[#5] balaclark at gmail dot com [2011-06-02 03:58:19]
Be aware that your default timezone can sometimes alter the result of a diff so that the returned months/days are incorrect.
There is a bug report at: http://bugs.php.net/bug.php?id=52480
[#6] pekka at gmx dot de [2011-02-13 03:20:49]
Note that `%a` is broken on Windows on VC6 builds. http://bugs.php.net/bug.php?id=51184
[#7] kuzb [2011-02-04 17:15:12]
Quick class to allow you to input a time in any unit, and have it recalculate in to different denominations (for example, seconds to hours, minutes and seconds):
<?php
class DateIntervalEnhanced extends DateInterval
{
public function to_seconds()
{
return ($this->y * 365 * 24 * 60 * 60) +
($this->m * 30 * 24 * 60 * 60) +
($this->d * 24 * 60 * 60) +
($this->h * 60 * 60) +
($this->i * 60) +
$this->s;
}
public function recalculate()
{
$seconds = $this->to_seconds();
$this->y = floor($seconds/60/60/24/365);
$seconds -= $this->y * 31536000;
$this->m = floor($seconds/60/60/24/30);
$seconds -= $this->m * 2592000;
$this->d = floor($seconds/60/60/24);
$seconds -= $this->d * 86400;
$this->h = floor($seconds/60/60);
$seconds -= $this->h * 3600;
$this->i = floor($seconds/60);
$seconds -= $this->i * 60;
$this->s = $seconds;
}
}
// Example usage
$di = new DateIntervalEnhanced('PT3600S');
$di->recalculate();
// outputs 1:0:0 instead of 0:0:3600 now!
echo $di->format('%H:%i:%s');
?>
[#8] baptiste dot place at utopiaweb dot fr [2010-03-15 07:47:56]
With php 5.3, DateTime is sweet !
Here is one quick example :
<?php
public function formatDateDiff($start, $end=null) {
if(!($start instanceof DateTime)) {
$start = new DateTime($start);
}
if($end === null) {
$end = new DateTime();
}
if(!($end instanceof DateTime)) {
$end = new DateTime($start);
}
$interval = $end->diff($start);
$doPlural = function($nb,$str){return $nb>1?$str.'s':$str;}; // adds plurals
$format = array();
if($interval->y !== 0) {
$format[] = "%y ".$doPlural($interval->y, "year");
}
if($interval->m !== 0) {
$format[] = "%m ".$doPlural($interval->m, "month");
}
if($interval->d !== 0) {
$format[] = "%d ".$doPlural($interval->d, "day");
}
if($interval->h !== 0) {
$format[] = "%h ".$doPlural($interval->h, "hour");
}
if($interval->i !== 0) {
$format[] = "%i ".$doPlural($interval->i, "minute");
}
if($interval->s !== 0) {
if(!count($format)) {
return "less than a minute ago";
} else {
$format[] = "%s ".$doPlural($interval->s, "second");
}
}
// We use the two biggest parts
if(count($format) > 1) {
$format = array_shift($format)." and ".array_shift($format);
} else {
$format = array_pop($format);
}
// Prepend 'since ' or whatever you like
return $interval->format($format);
}
?>