rac_grid自检出现网络问题

WBOY
发布: 2016-06-07 16:06:43
原创
1787 人浏览过

原创作品,出自 “深蓝的blog” 博客,欢迎转载,转载时请务必注明以下出处,否则追究版权法律责任。 深蓝的blog:http://blog.csdn.net/huangyanlong/article/details/40735481 环境:Cent0S 6.4 64bit、grid 64bit 自检出现“TCP connectivity of subnet”

原创作品,出自 “深蓝的blog” 博客,欢迎转载,转载时请务必注明以下出处,否则追究版权法律责任。

深蓝的blog:http://blog.csdn.net/huangyanlong/article/details/40735481

环境:Cent0S 6.4 64bit、grid 64bit

自检出现“TCP connectivity of subnet”问题。

【问题】
手工进行grid自检,报出如下错误:
[grid@xzxt1 grid]$ ./runcluvfy.sh stage -pre crsinst -n xzxt1,xzxt2 -fixup -verbose

......
......
Check: Node connectivity of subnet "192.168.56.0"
  Source                          Destination                     Connected?      
  ------------------------------  ------------------------------  ----------------
  xzxt2[192.168.56.31]            xzxt1[192.168.56.30]            yes             
Result: Node connectivity passed for subnet "192.168.56.0" with node(s) xzxt2,xzxt1


Check: TCP connectivity of subnet "192.168.56.0"
  Source                          Destination                     Connected?      
  ------------------------------  ------------------------------  ----------------
  xzxt1:192.168.56.30             xzxt2:192.168.56.31             failed          

ERROR: 
PRVF-7617 : Node connectivity between "xzxt1 : 192.168.56.30" and "xzxt2 : 192.168.56.31" failed
Result: TCP connectivity check failed for subnet "192.168.56.0"

Check: Node connectivity of subnet "10.10.10.0"
  Source                          Destination                     Connected?      
  ------------------------------  ------------------------------  ----------------
  xzxt2[10.10.10.91]              xzxt1[10.10.10.90]              yes             
Result: Node connectivity passed for subnet "10.10.10.0" with node(s) xzxt2,xzxt1

Check: TCP connectivity of subnet "10.10.10.0"
  Source                          Destination                     Connected?      
  ------------------------------  ------------------------------  ----------------
  xzxt1:10.10.10.90               xzxt2:10.10.10.91               failed          

ERROR: 
PRVF-7617 : Node connectivity between "xzxt1 : 10.10.10.90" and "xzxt2 : 10.10.10.91" failed
Result: TCP connectivity check failed for subnet "10.10.10.0"

Interfaces found on subnet "192.168.56.0" that are likely candidates for VIP are:
xzxt2 eth0:192.168.56.31
xzxt1 eth0:192.168.56.30

WARNING: 
Could not find a suitable set of interfaces for the private interconnect
Checking subnet mask consistency...
Subnet mask consistency check passed for subnet "192.168.56.0".
Subnet mask consistency check passed for subnet "10.10.10.0".
Subnet mask consistency check passed.

Result: Node connectivity check failed

Checking multicast communication...

Checking subnet "192.168.56.0" for multicast communication with multicast group "230.0.1.0"...
PRVG-11134 : Interface "192.168.56.31" on node "xzxt2" is not able to communicate with interface "192.168.56.31" on node "xzxt2"
PRVG-11134 : Interface "192.168.56.31" on node "xzxt2" is not able to communicate with interface "192.168.56.30" on node "xzxt1"
PRVG-11134 : Interface "192.168.56.30" on node "xzxt1" is not able to communicate with interface "192.168.56.31" on node "xzxt2"
PRVG-11134 : Interface "192.168.56.30" on node "xzxt1" is not able to communicate with interface "192.168.56.30" on node "xzxt1"
Checking subnet "192.168.56.0" for multicast communication with multicast group "224.0.0.251"...
PRVG-11134 : Interface "192.168.56.31" on node "xzxt2" is not able to communicate with interface "192.168.56.31" on node "xzxt2"
PRVG-11134 : Interface "192.168.56.31" on node "xzxt2" is not able to communicate with interface "192.168.56.30" on node "xzxt1"
PRVG-11134 : Interface "192.168.56.30" on node "xzxt1" is not able to communicate with interface "192.168.56.31" on node "xzxt2"
PRVG-11134 : Interface "192.168.56.30" on node "xzxt1" is not able to communicate with interface "192.168.56.30" on node "xzxt1"
Checking subnet "10.10.10.0" for multicast communication with multicast group "230.0.1.0"...
PRVG-11134 : Interface "10.10.10.91" on node "xzxt2" is not able to communicate with interface "10.10.10.91" on node "xzxt2"
PRVG-11134 : Interface "10.10.10.91" on node "xzxt2" is not able to communicate with interface "10.10.10.90" on node "xzxt1"
PRVG-11134 : Interface "10.10.10.90" on node "xzxt1" is not able to communicate with interface "10.10.10.91" on node "xzxt2"
PRVG-11134 : Interface "10.10.10.90" on node "xzxt1" is not able to communicate with interface "10.10.10.90" on node "xzxt1"
Checking subnet "10.10.10.0" for multicast communication with multicast group "224.0.0.251"...
PRVG-11134 : Interface "10.10.10.91" on node "xzxt2" is not able to communicate with interface "10.10.10.91" on node "xzxt2"
PRVG-11134 : Interface "10.10.10.91" on node "xzxt2" is not able to communicate with interface "10.10.10.90" on node "xzxt1"
PRVG-11134 : Interface "10.10.10.90" on node "xzxt1" is not able to communicate with interface "10.10.10.91" on node "xzxt2"
PRVG-11134 : Interface "10.10.10.90" on node "xzxt1" is not able to communicate with interface "10.10.10.90" on node "xzxt1"
......
......
登录后复制

【解决】
[root@xzxt1 network-scripts]# vi ifcfg-eth0
--去掉GATEWAY=192.168.56.1
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
IPADDR=192.168.56.30
NETMASK=255.255.255.0

[root@xzxt1 network-scripts]# vi ifcfg-eth1
--去掉GATEWAY=10.10.10.1
DEVICE=eth1
ONBOOT=yes
BOOTPROTO=static
IPADDR=10.10.10.90
NETMASK=255.255.255.0


重启服务器后,再次自检此问题不再出现。

原创作品,出自 “深蓝的blog” 博客,欢迎转载,转载时请务必注明以下出处,否则追究版权法律责任。

深蓝的blog:http://blog.csdn.net/huangyanlong/article/details/40735481


相关标签:
来源:php.cn
本站声明
本文内容由网友自发贡献,版权归原作者所有,本站不承担相应法律责任。如您发现有涉嫌抄袭侵权的内容,请联系admin@php.cn
热门教程
更多>
最新下载
更多>
网站特效
网站源码
网站素材
前端模板
关于我们 免责声明 Sitemap
PHP中文网:公益在线PHP培训,帮助PHP学习者快速成长!