php 仿asp xmlhttprequest请求数据代码_PHP教程
类名 :httprequest($url="",$method="get",$usesocket=0)
//$url为请求的地址;默认请求方法为get;$usesocket默认为0,使用fsockopen方法,如果设置为1则使用socket_create方法
方法:
open($ip="",$port=-1) //打开同服务器的连接,默认不用设置这两个参数(一个同事在linux用的时候,请求的不是hostname解析的ip,因此加了这两个参数,以连接真实的服务器ip)
settimeout($timeout=0) //设置获取数据的超时时间,必须在send方法调用之前设置才有效,单位秒,默认值0为不限制
setrequestheader($key,$value="") //设置请求头,必须在send方法调用之前设置才有效
removerequestheader($key,$value="") //移除指定键值的请求头,必须在send方法调用之前调用才有效
send($data="") //发送数据$data到服务器
getresponsebody() //获取服务器返回的文本
getallresponseheaders() //获取服务器响应的所有头信息
getresponseheader($key) //获取服务器响应的某个头信息,例如server,set_cookie等
属性:
$url //要请求的url
$method //请求方法(post/get)
$port //请求的端口
$hostname //请求的主机名
$uri //url的文件部分
$protocol //请求协议(http)(包括本属性的以上5个属性均由程序自动通过url分析)
$excption //异常信息
$_headers=array() //请求头array("key"=>"value")
$_senddata //发送到服务器的数据
$status //返回的状态码
$statustext //状态信息
$httpprotocolversion //服务器的http协议版本
注意:
host头由程序自动设置,当用post方法请求时,content-length和content-type已被自动设置。
支持gzip压缩的页面
inc.http.php教程文件
class httprequest{
public $url,$method,$port,$hostname,$uri,$protocol,$excption,$_headers=array(),$_senddata,$status,$statustext,$httpprotocolversion;
private $fp=0,$_buffer="",$responsebody,$responseheader,$timeout=0,$usesocket;
//构造函数
function __construct($url="",$method="get",$usesocket=0){
$this->url = $url;
$this->method = strtoupper($method);
$this->usesocket = $usesocket;
$this->setrequestheader("accept","*/*");
$this->setrequestheader("accept-language","zh-cn");
$this->setrequestheader("accept-encoding","gzip, deflate");
$this->setrequestheader("user-agent","httprequest class 1.0"); //可调用setrequestheader来修改
}
//连接服务器
public function open($ip="",$port=-1){
if(!$this->_geturlinfo()) return false;
$this->setrequestheader("host",$this->hostname);
$this->setrequestheader("connection","close");
$ip = ($ip=="" ? $this->hostname : $ip);
$port = ($port==-1 ? $this->port : $port);
if($this->usesocket==1){
if(!$this->fp=$socket=socket_create(af_inet,sock_stream,0)) {
$this->excption="can not create socket";return false;
}else{
if(!socket_connect($this->fp,$ip, $port) ){
$this->excption="can not connect to server " . $this->hostname . " on port" . $this->port;return false;
}
}
}else{
if(!$this->fp=fsockopen($ip, $port,$errno,$errstr,10)) {
$this->excption="can not connect to server " . $this->hostname . " on port" . $this->port;return false;
}
}
return true;
}
public function send($data=""){
if(!$this->fp){$this->excption="is not a resource id";return false;}
if($this->method=="get" && $data!=""){
$s_str="?";
if(strpos($this->uri,"?")>0) $s_str = "&";
$this->uri.= $s_str . $data;
$data="";
}
$senddata=$this->method . " " . $this->uri . " http/1.1rn";
if($this->method=="post"){
$this->setrequestheader("content-length",strlen($data));
$this->setrequestheader("content-type", "application/x-www-form-urlencoded");
}
foreach($this->_headers as $keys => $value){
$senddata .= "$keys: $valuern";
}
$senddata .= "rn";
if($this->method=="post") $senddata .= $data;
$this->_senddata = $senddata;
if($this->usesocket==1){
socket_write($this->fp,$this->_senddata);
$buffer="";
$timestart = time();
do{
if($this->timeout>0){
if(time()-$timestart>$this->timeout){break;}
}
$this->_buffer.=$buffer;
$buffer = socket_read($this->fp,4096);
}while($buffer!="");
socket_close($this->fp);
}else{
fputs($this->fp, $senddata);
$this->_buffer="";
$timestart = time();
while(!feof($this->fp))
{
if($this->timeout>0){
if(time()-$timestart>$this->timeout){break;}
}
$this->_buffer.=fgets($this->fp,4096);
}
fclose($this->fp);
}
$this->_splitcontent();
$this->_getheaderinfo();
}
public function getresponsebody(){
if($this->getresponseheader("content-encoding")=="gzip" && $this->getresponseheader("transfer-encoding")=="chunked"){
return gzdecode_1(transfer_encoding_chunked_decode($this->responsebody));
}else if($this->getresponseheader("content-encoding")=="gzip"){
return gzdecode_1($this->responsebody);
}else{
return $this->responsebody;
}
}
public function getallresponseheaders(){
return $this->responseheader;
}
public function getresponseheader($key){
$key = str_replace("-","-",$key);
$headerstr = $this->responseheader . "rn";
$count = preg_match_all("/n$key:(.+?)r/is",$headerstr,$result,preg_set_order);
if($count>0){
$returnstr="";
foreach($result as $key1=>$value){
if(strtoupper($key)=="set-cookie"){
$value[1] = substr($value[1],0,strpos($value[1],";"));
}
$returnstr .= ltrim($value[1]) . "; ";
}
$returnstr = substr($returnstr,0,strlen($returnstr)-2);
return $returnstr;
}else{return "";}
}
public function settimeout($timeout=0){
$this->timeout = $timeout;
}
public function setrequestheader($key,$value=""){
$this->_headers[$key]=$value;
}
public function removerequestheader($key){
if(count($this->_headers)==0){return;}
$_temp=array();
foreach($this->_headers as $keys => $value){
if($keys!=$key){
$_temp[$keys]=$value;
}
}
$this->_headers = $_temp;
}
//拆分url
private function _geturlinfo(){
$url = $this->url;
$count = preg_match("/^http://([^:/]+?)(:(d+))?/(.+?)$/is",$url,$result);
if($count>0){
$this->uri="/" . $result[4];
}else{
$count = preg_match("/^http://([^:/]+?)(:(d+))?(/)?$/is",$url,$result);
if($count>0){
$this->uri="/";
}
}
if($count>0){
$this->protocol="http";
$this->hostname=$result[1];
if(isset($result[2]) && $result[2]!="") {$this->port=intval($result[3]);}else{$this->port=80;}
return true;
}else{$this->excption="url format error";return false;}
}
private function _splitcontent(){
$this->responseheader="";
$this->responsebody="";
$p1 = strpos($this->_buffer,"rnrn");
if($p1>0){
$this->responseheader = substr($this->_buffer,0,$p1);
if($p1+4_buffer)){
$this->responsebody = substr($this->_buffer,$p1+4);
}
}
}
private function _getheaderinfo(){
$headerstr = $this->responseheader;
$count = preg_match("/^http/(.+?)s(d+)s(.+?)rn/is",$headerstr,$result);
if($count>0){
$this->httpprotocolversion = $result[1];
$this->status = intval($result[2]);
$this->statustext = $result[3];
}
}
}
//以下两函数参考网络
function gzdecode_1 ($data) {
$data = ($data);
if (!function_exists ( 'gzdecode' )) {
$flags = ord ( substr ( $data, 3, 1 ) );
$headerlen = 10;
$extralen = 0;
$filenamelen = 0;
if ($flags & 4) {
$extralen = unpack ( 'v', substr ( $data, 10, 2 ) );
$extralen = $extralen [1];
$headerlen += 2 + $extralen;
}
if ($flags & 8) // filename
$headerlen = strpos ( $data, chr ( 0 ), $headerlen ) + 1;
if ($flags & 16) // comment
$headerlen = strpos ( $data, chr ( 0 ), $headerlen ) + 1;
if ($flags & 2) // crc at end of file
$headerlen += 2;
$unpacked = @gzinflate ( substr ( $data, $headerlen ) );
if ($unpacked === false)
$unpacked = $data;
return $unpacked;
}else{
return gzdecode($data);
}
}function transfer_encoding_chunked_decode($in) {
$out = "";
while ( $in !="") {
$lf_pos = strpos ( $in, "12" );
if ($lf_pos === false) {
$out .= $in;
break;
}
$chunk_hex = trim ( substr ( $in, 0, $lf_pos ) );
$sc_pos = strpos ( $chunk_hex, ';' );
if ($sc_pos !== false)
$chunk_hex = substr ( $chunk_hex, 0, $sc_pos );
if ($chunk_hex =="") {
$out .= substr ( $in, 0, $lf_pos );
$in = substr ( $in, $lf_pos + 1 );
continue;
}
$chunk_len = hexdec ( $chunk_hex );
if ($chunk_len) {
$out .= substr ( $in, $lf_pos + 1, $chunk_len );
$in = substr ( $in, $lf_pos + 2 + $chunk_len );
} else {
$in = "";
}
}
return $out;
}
function utf8togb($str){
return iconv("utf-8","gbk",$str);
}function gbtoutf8($str){
return iconv("gbk","utf-8",$str);
}
?>
response.asp教程文件
response.cookies("a") = "anlige"
response.cookies("a").expires = dateadd("yyyy",1,now())
response.cookies("b")("c") = "wsdasdadsa"
response.cookies("b")("d") = "ddd"
response.cookies("b").expires = dateadd("yyyy",1,now())
response.write "querystring : " & request.querystring & "
"
for each v in request.querystring
response.write v & "=" & request.querystring(v) & "
"
next
response.write "
form : " & request.form & "
"
for each v in request.form
response.write v & "=" & request.form(v) & "
"
next
response.write "
url : " & request.servervariables("url") & "
"
response.write "referer : " & request.servervariables("http_referer") & "
"
response.write "host : " & request.servervariables("http_host") & "
"
response.write "user-agent : " & request.servervariables("http_user_agent") & "
"
response.write "cookie" & request.servervariables("http_cookie")
%>
index.php文件
get传数据
post传数据
向服务器发送来路信息
向服务器发送user-agent
获取服务器返回的状态
获取服务器响应头
保存图片
include("inc_http.php");
$responseurl = "http://dev.mo.cn/aiencode/http/response.asp";$act = isset($_get["action"]) ? $_get["action"] : "";
if($act == "get"){ //get传数据$myhttp = new httprequest("$responseurl?a=text");
$myhttp->open();
$myhttp->send("name=anlige&city=" . urlencode("杭州"));
echo($myhttp->getresponsebody());
}else if($act == "post"){ //post传数据$myhttp = new httprequest("$responseurl?a=text","post");
$myhttp->open();
$myhttp->send("name=anlige&city=" . urlencode("杭州"));
echo($myhttp->getresponsebody());
}else if($act == "header_referer"){ //向服务器发送来路信息$myhttp = new httprequest("$responseurl?a=text","post");
$myhttp->open();
$myhttp->setrequestheader("referer","http://www.baidu.com");
$myhttp->send("name=anlige&city=" . urlencode("杭州"));
echo($myhttp->getresponsebody());
}else if($act == "header_useragent"){ //向服务器发送user-agent$myhttp = new httprequest("$responseurl?a=text","post");
$myhttp->open();
$myhttp->setrequestheader("referer","http://www.baidu.com");
$myhttp->setrequestheader("user-agent","mozilla/4.0 (compatible; msie 7.0; windows nt 6.0; trident/4.0)");
$myhttp->send("name=anlige&city=" . urlencode("杭州"));
echo($myhttp->getresponsebody());
}else if($act == "status"){ //获取服务器返回的状态$myhttp = new httprequest("$responseurl?a=text","post");
$myhttp->open();
$myhttp->send("name=anlige&city=" . urlencode("杭州"));
echo($myhttp->status . " " . $myhttp->statustext ."
");
echo($myhttp->getresponsebody());
}else if($act == "get_headers"){ //获取服务器响应头$myhttp = new httprequest("$responseurl?a=text","get");
$myhttp->open();
$myhttp->send("name=anlige&city=" . urlencode("杭州"));
echo($myhttp->getallresponseheaders()."
");
echo($myhttp->getresponseheader("server")."
");
}else if($act == "get_image"){
$myhttp = new httprequest("http://www.baidu.com/img/baidu_logo.gif");
$myhttp->open();
$myhttp->send();
$fp = @fopen("demo.gif","w");
fwrite($fp,$myhttp->getresponsebody());
fclose($fp);
echo("");
}
?>

热AI工具

Undresser.AI Undress
人工智能驱动的应用程序,用于创建逼真的裸体照片

AI Clothes Remover
用于从照片中去除衣服的在线人工智能工具。

Undress AI Tool
免费脱衣服图片

Clothoff.io
AI脱衣机

AI Hentai Generator
免费生成ai无尽的。

热门文章

热工具

记事本++7.3.1
好用且免费的代码编辑器

SublimeText3汉化版
中文版,非常好用

禅工作室 13.0.1
功能强大的PHP集成开发环境

Dreamweaver CS6
视觉化网页开发工具

SublimeText3 Mac版
神级代码编辑软件(SublimeText3)

热门话题

PHP 8.4 带来了多项新功能、安全性改进和性能改进,同时弃用和删除了大量功能。 本指南介绍了如何在 Ubuntu、Debian 或其衍生版本上安装 PHP 8.4 或升级到 PHP 8.4

Visual Studio Code,也称为 VS Code,是一个免费的源代码编辑器 - 或集成开发环境 (IDE) - 可用于所有主要操作系统。 VS Code 拥有针对多种编程语言的大量扩展,可以轻松编写

本教程演示了如何使用PHP有效地处理XML文档。 XML(可扩展的标记语言)是一种用于人类可读性和机器解析的多功能文本标记语言。它通常用于数据存储

字符串是由字符组成的序列,包括字母、数字和符号。本教程将学习如何使用不同的方法在PHP中计算给定字符串中元音的数量。英语中的元音是a、e、i、o、u,它们可以是大写或小写。 什么是元音? 元音是代表特定语音的字母字符。英语中共有五个元音,包括大写和小写: a, e, i, o, u 示例 1 输入:字符串 = "Tutorialspoint" 输出:6 解释 字符串 "Tutorialspoint" 中的元音是 u、o、i、a、o、i。总共有 6 个元

JWT是一种基于JSON的开放标准,用于在各方之间安全地传输信息,主要用于身份验证和信息交换。1.JWT由Header、Payload和Signature三部分组成。2.JWT的工作原理包括生成JWT、验证JWT和解析Payload三个步骤。3.在PHP中使用JWT进行身份验证时,可以生成和验证JWT,并在高级用法中包含用户角色和权限信息。4.常见错误包括签名验证失败、令牌过期和Payload过大,调试技巧包括使用调试工具和日志记录。5.性能优化和最佳实践包括使用合适的签名算法、合理设置有效期、

如果您是一位经验丰富的 PHP 开发人员,您可能会感觉您已经在那里并且已经完成了。您已经开发了大量的应用程序,调试了数百万行代码,并调整了一堆脚本来实现操作

静态绑定(static::)在PHP中实现晚期静态绑定(LSB),允许在静态上下文中引用调用类而非定义类。1)解析过程在运行时进行,2)在继承关系中向上查找调用类,3)可能带来性能开销。

PHP的魔法方法有哪些?PHP的魔法方法包括:1.\_\_construct,用于初始化对象;2.\_\_destruct,用于清理资源;3.\_\_call,处理不存在的方法调用;4.\_\_get,实现动态属性访问;5.\_\_set,实现动态属性设置。这些方法在特定情况下自动调用,提升代码的灵活性和效率。
