社区 学习 工具库 休闲
搜索
简体中文
首页 > 后端开发 > PHP问题 > centos7如何安装php环境

centos7如何安装php环境

藏色散人
发布： 2023-03-02 13:10:02
原创
4204 人浏览过

centos7安装php环境的方法：首先用yum快速搭建LAMP平台；然后安装PHP，并将php与mysql关联起来；接着安装常用PHP模块，并创建“phpinfo();”用于测试PHP；最后重启apache服务器即可。

centos7如何安装php环境

Centos7下面安装PHP环境

用yum快速搭建LAMP平台

 

实验环境：

[root@nmserver-7 html]# cat  /etc/redhat-release 
CentOS release 7.3.1611 (AltArch) 
[root@nmserver-7 html]# uname -a
Linux nmserver-7.test.com 3.10.0-514.el7.centos.plus.i686 #1 SMP Wed Jan 25 12:55:04 UTC 2017 i686 i686 i386 GNU/Linux
登录后复制

1、安装apache

　　1.1 安装apache

[root@nmserver-7 ~]# yum install httpd httpd-devel
登录后复制

　　1.2 启动apache服务

[root@nmserver-7 ~]# systemctl start  httpd
登录后复制

　　1.3 设置httpd服务开机启动

[root@nmserver-7 ~]# systemctl enable  httpd
Created symlink from /etc/systemd/system/multi-user.target.wants/httpd.service to /usr/lib/systemd/system/httpd.service.
登录后复制

　　1.4 查看服务状态

[root@nmserver-7 ~]# systemctl status httpd
● httpd.service - The Apache HTTP Server
   Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled; vendor preset: disabled)
   Active: active (running) since 五 2017-07-21 17:21:37 CST; 6min ago
     Docs: man:httpd(8)
           man:apachectl(8)
 Main PID: 2449 (httpd)
   Status: "Total requests: 11; Current requests/sec: 0; Current traffic:   0 B/sec"
   CGroup: /system.slice/httpd.service
           ├─2449 /usr/sbin/httpd -DFOREGROUND
           ├─2450 /usr/sbin/httpd -DFOREGROUND
           ├─2451 /usr/sbin/httpd -DFOREGROUND
           ├─2452 /usr/sbin/httpd -DFOREGROUND
           ├─2453 /usr/sbin/httpd -DFOREGROUND
           ├─2454 /usr/sbin/httpd -DFOREGROUND
           ├─2493 /usr/sbin/httpd -DFOREGROUND
           ├─2494 /usr/sbin/httpd -DFOREGROUND
           └─2495 /usr/sbin/httpd -DFOREGROUND
7月 21 17:21:35 nmserver-7.test.com systemd[1]: Starting The Apache HTTP Server...
7月 21 17:21:36 nmserver-7.test.com httpd[2449]: AH00558: httpd: Could not reliably determine the server's fully q...ssage
7月 21 17:21:37 nmserver-7.test.com systemd[1]: Started The Apache HTTP Server.
Hint: Some lines were ellipsized, use -l to show in full.
登录后复制
　　1.5 防火墙设置开启80端口
[root@nmserver-7 ~]# firewall-cmd --permanent --zone=public  --add-service=http
success
[root@nmserver-7 ~]# firewall-cmd --permanent --zone=public  --add-service=https
success
[root@nmserver-7 ~]# firewall-cmd --reload
success
登录后复制

　　1.6确认80端口监听中

[root@nmserver-7 ~]# netstat -tulp
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name    
tcp        0      0 0.0.0.0:ssh             0.0.0.0:*               LISTEN      1084/sshd           
tcp        0      0 localhost:smtp          0.0.0.0:*               LISTEN      1486/master         
tcp6       0      0 [::]:ssh                [::]:*                  LISTEN      1084/sshd           
tcp6       0      0 localhost:smtp          [::]:*                  LISTEN      1486/master         
tcp6       0      0 [::]:http               [::]:*                  LISTEN      2449/httpd          
udp        0      0 localhost:323           0.0.0.0:*                           592/chronyd         
udp6       0      0 localhost:323           [::]:*                              592/chronyd
登录后复制

　　1.8 查服务器IP

[root@nmserver-7 ~]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:56:bc:cf brd ff:ff:ff:ff:ff:ff
    inet 192.168.8.9/24 brd 192.168.8.255 scope global ens33
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:fe56:bccf/64 scope link 
       valid_lft forever preferred_lft forever
3: bridge0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000
    link/ether ea:89:d5:c7:32:73 brd ff:ff:ff:ff:ff:ff
登录后复制

　　1.9 浏览器登陆

如果浏览器访问不了，配置阿里云控制台的安全组80

2、安装mysql

　　2.1安装mysql

[root@nmserver-7 ~]# yum install mariadb mariadb-server mariadb-libs mariadb-devel
 
root@nmserver-7 ~]# rpm -qa |grep maria
mariadb-libs-5.5.52-1.el7.i686
mariadb-5.5.52-1.el7.i686
mariadb-server-5.5.52-1.el7.i686
mariadb-devel-5.5.52-1.el7.i686
登录后复制

　　2.2 开启mysql服务，并设置开机启动，检查mysql状态

[root@nmserver-7 ~]# systemctl start  mariadb 
[root@nmserver-7 ~]# systemctl enable  mariadb 
Created symlink from /etc/systemd/system/multi-user.target.wants/mariadb.service to /usr/lib/systemd/system/mariadb.service.
[root@nmserver-7 ~]# systemctl status  mariadb 
● mariadb.service - MariaDB database server
   Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; vendor preset: disabled)
   Active: active (running) since 六 2017-07-22 21:19:20 CST; 21s ago
 Main PID: 9603 (mysqld_safe)
   CGroup: /system.slice/mariadb.service
           ├─9603 /bin/sh /usr/bin/mysqld_safe --basedir=/usr
           └─9760 /usr/libexec/mysqld --basedir=/usr --datadir=/v...
7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:16 nmserver-7.test.com mysqld_safe[9603]: 170722 21...
7月 22 21:19:16 nmserver-7.test.com mysqld_safe[9603]: 170722 21...
7月 22 21:19:20 nmserver-7.test.com systemd[1]: Started MariaDB ...
登录后复制

[root@nmserver-7 ~]# netstat -tulp
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name    
tcp        0      0 0.0.0.0:ssh             0.0.0.0:*               LISTEN      1084/sshd           
tcp        0      0 0.0.0.0:mysql           0.0.0.0:*               LISTEN      9760/mysqld         
tcp6       0      0 [::]:ssh                [::]:*                  LISTEN      1084/sshd           
tcp6       0      0 [::]:http               [::]:*                  LISTEN      2449/httpd          
udp        0      0 localhost:323           0.0.0.0:*                           592/chronyd         
udp6       0      0 localhost:323           [::]:*                              592/chronyd
登录后复制

　　2.3 数据库安全设置

[root@nmserver-7 ~]# mysql_secure_installation 
NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MariaDB
      SERVERS IN PRODUCTION USE!  PLEASE READ EACH STEP CAREFULLY!
In order to log into MariaDB to secure it, we&#39;ll need the current
password for the root user.  If you&#39;ve just installed MariaDB, and
you haven&#39;t set the root password yet, the password will be blank,
so you should just press enter here.
Enter current password for root (enter for none): 
OK, successfully used password, moving on...
Setting the root password ensures that nobody can log into the MariaDB
root user without the proper authorisation.
Set root password? [Y/n] y
New password: 
Re-enter new password: 
Password updated successfully!
Reloading privilege tables..
 ... Success!
By default, a MariaDB installation has an anonymous user, allowing anyone
to log into MariaDB without having to have a user account created for
them.  This is intended only for testing, and to make the installation
go a bit smoother.  You should remove them before moving into a
production environment.
Remove anonymous users? [Y/n] y
 ... Success!
Normally, root should only be allowed to connect from &#39;localhost&#39;.  This
ensures that someone cannot guess at the root password from the network.
Disallow root login remotely? [Y/n] n
 ... skipping.
By default, MariaDB comes with a database named &#39;test&#39; that anyone can
access.  This is also intended only for testing, and should be removed
before moving into a production environment.
Remove test database and access to it? [Y/n] y
 - Dropping test database...
 ... Success!
 - Removing privileges on test database...
 ... Success!
Reloading the privilege tables will ensure that all changes made so far
will take effect immediately.
Reload privilege tables now? [Y/n] y
 ... Success!
Cleaning up...
All done!  If you&#39;ve completed all of the above steps, your MariaDB
installation should now be secure.
Thanks for using MariaDB!
登录后复制

　　2.4 登陆数据库测试

[root@nmserver-7 ~]# mysql -uroot -p
Enter password: 
Welcome to the MariaDB monitor.  Commands end with ; or \g.
Your MariaDB connection id is 11
Server version: 5.5.52-MariaDB MariaDB Server
Copyright (c) 2000, 2016, Oracle, MariaDB Corporation Ab and others.
Type &#39;help;&#39; or &#39;\h&#39; for help. Type &#39;\c&#39; to clear the current input statement.
MariaDB [(none)]> show databases;
+--------------------+
| Database           |
+--------------------+
| information_schema |
| mysql              |
| performance_schema |
+--------------------+
3 rows in set (0.02 sec)
MariaDB [(none)]>
登录后复制

3、安装PHP

　　3.1 安装php

[root@nmserver-7 ~]# yum -y install php
[root@nmserver-7 ~]# rpm -ql php
/etc/httpd/conf.d/php.conf
/etc/httpd/conf.modules.d/10-php.conf
/usr/lib/httpd/modules/libphp5.so
/usr/share/httpd/icons/php.gif
/var/lib/php/session
登录后复制

　　3.2 将php与mysql关联起来

[root@nmserver-7 ~]# yum install php-mysql
[root@nmserver-7 ~]# rpm -ql php-mysql
/etc/php.d/mysql.ini
/etc/php.d/mysqli.ini
/etc/php.d/pdo_mysql.ini
/usr/lib/php/modules/mysql.so
/usr/lib/php/modules/mysqli.so
/usr/lib/php/modules/pdo_mysql.so
登录后复制

　　3.3 安装常用PHP模块

[root@nmserver-7 ~]# yum install -y php-gd php-ldap php-odbc php-pear php-xml php-xmlrpc php-mbstring php-snmp php-soap curl curl-devel php-bcmath
登录后复制

　　3.4 测试PHP

[root@nmserver-7 ~]# cd  /var/www/html/
[root@nmserver-7 html]# ls
[root@nmserver-7 html]# pwd
/var/www/html
[root@nmserver-7 html]# vi info.php
<?php
        phpinfo();
?>
~                                                                                        
~                                                                                        
~                                                                                        
~                                                                                        
~                                                                                        
~                                                                                        
~                                                                                        
~                                                                            
:wq
登录后复制

 

　　3.5重启apache服务器

[root@nmserver-7 html]# systemctl restart http

　　3.6测试PHP

　　在自己电脑浏览器输入 192.168.8.9/info.php，你可以看到已经安装的模块；

更多相关知识，请访问PHP中文网！

以上是centos7如何安装php环境的详细内容。更多信息请关注PHP中文网其他相关文章！

相关标签：
centos7 php
来源：php.cn
上一篇：apache php 乱码的解决方法汇总 下一篇：php读取txt是乱码怎么办
本站声明
本文内容由网友自发贡献，版权归原作者所有，本站不承担相应法律责任。如您发现有涉嫌抄袭侵权的内容，请联系admin@php.cn
作者最新文章
最新问题
function_exists()无法判定自定义函数 function test()    {        return true;    }    if (function_exists('TEST')) {        ech...
来自于 2024-04-29 11:01:01
0
3
2224
google 浏览器 手机版显示的怎么实现 老师您好，google 浏览器怎么变成手机版样式的？
来自于 2024-04-23 00:22:19
0
11
2369
子窗口操作父窗口，输出没反应 前两句可执行，最后一句没法应
来自于 2024-04-19 15:37:47
0
1
1978
父窗口没有输出 document.onclick = function(){ window.opener.document.write('我是子窗口的输出');                  ...
来自于 2024-04-18 23:52:34
0
1
1864
关于CSS思维导图的课件在哪？ 课件
来自于 2024-04-16 10:10:18
0
0
1936
相关专题
更多>
热门推荐
热门教程
更多>
相关教程
热门推荐
最新课程
最新下载
更多>
网站特效
网站源码
网站素材
前端模板