©
本文档使用 PHP中文网手册 发布
fsockopen
(PHP 4, PHP 5)
fsockopen — 打开一个网络连接或者一个Unix套接字连接
说明
$hostname
[, int $port = -1
[, int &$errno
[, string &$errstr
[, float $timeout = ini_get("default_socket_timeout")
]]]] )
初始化一个套接字连接到指定主机（hostname）。
PHP支持以下的套接字传输器类型列表 所支持的套接字传输器（Socket Transports）列表。也可以通过 stream_get_transports() 来获取套接字传输器支持类型。
默认情况下将以阻塞模式开启套接字连接。当然你可以通过 stream_set_blocking() 将它转换到非阻塞模式。
stream_socket_client() 与之非常相似，而且提供了更加丰富的参数设置，包括非阻塞模式和提供上下文的的设置。
参数
-
hostname -
如果安装了OpenSSL，那么你也许应该在你的主机名地址前面添加访问协议ssl://或者是tls://，从而可以使用基于TCP/IP协议的SSL或者TLS的客户端连接到远程主机。
-
port -
端口号。如果对该参数传一个-1，则表示不使用端口，例如unix://。
-
errno -
如果传入了该参数，holds the system level error number that occurred in the system-level connect() call。
如果
errno的返回值为0，而且这个函数的返回值为FALSE，那么这表明该错误发生在套接字连接（connect()）调用之前，导致连接失败的原因最大的可能是初始化套接字的时候发生了错误。 -
errstr -
错误信息将以字符串的信息返回。
-
timeout -
设置连接的时限，单位为秒。
Note:
注意：如果你要对建立在套接字基础上的读写操作设置操作时间设置连接时限，请使用 stream_set_timeout() ， fsockopen() 的连接时限（
timeout）的参数仅仅在套接字连接的时候生效。
返回值
fsockopen() 将返回一个文件句柄，之后可以被其他文件类函数调用（例如： fgets() ， fgetss() ， fwrite() ， fclose() 还有 feof() ）。如果调用失败，将返回 FALSE 。
错误／异常
如果主机（hostname）不可访问，将会抛出一个警告级别（ E_WARNING ）的错误提示。
更新日志
| 版本 | 说明 |
|---|---|
| 4.3.0 |
在win32系统上增加了对时限设置（timeout）参数的支持。
|
| 4.3.0 | 在TCP/IP协议的基础上增加了SSL和TLS。 |
范例
Example #1 fsockopen() 的例子
<?php
$fp = fsockopen ( "www.example.com" , 80 , $errno , $errstr , 30 );
if (! $fp ) {
echo " $errstr ( $errno )<br />\n" ;
} else {
$out = "GET / HTTP/1.1\r\n" ;
$out .= "Host: www.example.com\r\n" ;
$out .= "Connection: Close\r\n\r\n" ;
fwrite ( $fp , $out );
while (! feof ( $fp )) {
echo fgets ( $fp , 128 );
}
fclose ( $fp );
}
?>
Example #2 使用UDP连接
下面这个例子展示了怎么样在自己的机器上通过UDP套接字连接（端口号13）来检索日期和时间。
<?php
$fp = fsockopen ( "udp://127.0.0.1" , 13 , $errno , $errstr );
if (! $fp ) {
echo "ERROR: $errno - $errstr <br />\n" ;
} else {
fwrite ( $fp , "\n" );
echo fread ( $fp , 26 );
fclose ( $fp );
}
?> 注释
Note:
因为环境的不同，某些情况下在Unix套接字连接或者自定义的连接设置连接时限（
timeout）可能不会生效。
UDP套接字有些时候在即使远程主机未知的情况，也能打开，并且不发生任何错误。只有当你通过该套接字进行读写的时候才会发现错误。之所以会这样，是因为UDP是一个“非连接状态”的协议，那么这就意味着当前操作系统直到它（套接字）真正需要发送和接受数据的时候才会去尝试为其去建立连接。
Note: 当指定数值型的 IPv6 地址（例如 fe80::1）时必须用方括号将 IP 围起来——例如， tcp://[fe80::1]:80。
参见
- pfsockopen() - 打开一个持久的网络连接或者Unix套接字连接。
- stream_socket_client() - Open Internet or Unix domain socket connection
- stream_set_blocking() - 为资源流设置阻塞或者阻塞模式
- stream_set_timeout() - Set timeout period on a stream
- fgets() - 从文件指针中读取一行
- fgetss() - 从文件指针中读取一行并过滤掉 HTML 标记
- fwrite() - 写入文件（可安全用于二进制文件）
- fclose() - 关闭一个已打开的文件指针
- feof() - 测试文件指针是否到了文件结束的位置
- socket_connect() - 开启一个套接字连接
- The Curl extension
用户评论:
[#1] php at hatzidakis dot org [2015-11-03 10:02:40]
Although undocumented, it seems that $hostname can be a "<hostname>:<port>" string:
<?php
if (fsockopen("www.google.com:80", 80)) {
echo "Success!";
}
else {
echo "Fail";
}
?>
[#2] p14nd4 [2014-07-18 21:30:00]
It appears that in PHP 5.6.0 (at least the version in Debian jessie, with openssl 1.0.1h-3), this function *is* now validating SSL certificates (in a variety of ways). First, it appears to fail for untrusted certificates (i.e. no matching CA trusted locally), and secondly, it appears to fail for mismatched hostnames in the request and certificate.
---------
$ echo "<?php echo fsockopen(\"ssl://localhost\", 993); ?>" | php -a
Interactive mode enabled
PHP Warning: fsockopen(): Peer certificate CN=`my.test.server' did not match expected CN=`localhost' in - on line 1
PHP Warning: fsockopen(): Failed to enable crypto in - on line 1
PHP Warning: fsockopen(): unable to connect to ssl://localhost:993 (Unknown error) in - on line 1
----------
$ echo "<?php echo fsockopen(\"ssl://my.test.server\", 993); ?>" | php -a
Interactive mode enabled
PHP Warning: fsockopen(): SSL operation failed with code 1. OpenSSL Error messages:
error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed in - on line 1
PHP Warning: fsockopen(): Failed to enable crypto in - on line 1
PHP Warning: fsockopen(): unable to connect to ssl://my.test.server:993 (Unknown error) in - on line 1
---------
#installed CA locally
---------
$ echo "<?php echo fsockopen(\"ssl://my.test.server\", 993); ?>" | php -a
Interactive mode enabled
Resource id #1
[#3] biguenique at yahoo dot ca [2014-03-19 04:29:25]
Did you know that fsockopen() DOES NOT validate SSL certificates whatsoever? For the sake of World's overall security level, I guess it would be a very positive idea to add a BIG WARNING notice on the manual page!
Citing the extensive study titled "The Most Dangerous Code in the World: Validating SSL Certi?cates in Non-Browser Software" published in 2012 (google it if they removed the link) on page 5:
"PHP provides several methods for establishing SSL connections. For example, fsockopen, which opens a raw socket to the remote server, can be used to connect to SSL servers by putting ??ssl://?? in the URL. Even though fsockopen does not perform any certificate checks whatsoever, PHP application developers routinely use it for SSL connection establishment (see Section 9)."
For proper certificate validation with some level of ease, you can always move to cURL, but be careful:
"PHP also provides a cURL binding, which uses cURL??s default settings to establish SSL connections with proper certificate validation. As we show in Sections 7.1, 7.2, and 7.3, application developers often set cURL options incorrectly, overriding the defaults and breaking certificate validation."
For more detailed insights, try out the following code:
<?php readfile("http".str_replace('+', '.', implode('/', array(":", null, "www+cs+utexas+edu", "~shmat", "shmat_ccs12.pdf")))); ?>
[#4] Charles Torvalds [2013-04-28 17:06:21]
Rewrite/Update of king dot macro's DNS lookups function.
<?php
function gethostbyaddr_timeout( $ip, $dns, $timeout = 3 ) {
// src: http://www.askapache.com/php/php-fsockopen-dns-udp.html
// random transaction number (for routers etc to get the reply back)
$data = rand( 10, 77 ) . "\1\0\0\1\0\0\0\0\0\0";
// octals in the array, keys are strlen of bit
$bitso = array("","\1","\2","\3" );
foreach( array_reverse( explode( '.', $ip ) ) as $bit ) {
$l=strlen($bit);
$data.="{$bitso[$l]}".$bit;
}
// and the final bit of the request
$data .= "\7in-addr\4arpa\0\0\x0C\0\1";
// create UDP socket
$errno = $errstr = 0;
$fp = fsockopen( "udp://{$dns}", 53, $errno, $errstr, $timeout );
if( ! $fp || ! is_resource( $fp ) )
return $errno;
if( function_exists( 'socket_set_timeout' ) ) {
socket_set_timeout( $fp, $timeout );
} elseif ( function_exists( 'stream_set_timeout' ) ) {
stream_set_timeout( $fp, $timeout );
}
// send our request (and store request size so we can cheat later)
$requestsize = fwrite( $fp, $data );
$max_rx = $requestsize * 3;
$start = time();
$responsesize = 0;
while ( $rxed < $max_rx && ( ( time() - $start ) < $timeout ) && ($b = fread( $fp, 1 ) ) !== false ) {
$responsesize++;
$response .= $b;
}
echo "[tx: $requestsize bytes] [rx: {$responsesize} bytes]";
// hope we get a reply
if ( is_resource( $fp ) )
fclose( $fp );
// if empty response or bad response, return original ip
if ( empty( $response ) || bin2hex( substr( $response, $requestsize + 2, 2 ) ) != '000c' )
return $ip;
// set up our variables
$host = '';
$len = $loops = 0;
// set our pointer at the beginning of the hostname uses the request size from earlier rather than work it out
$pos = $requestsize + 12;
do {
// get segment size
$len = unpack( 'c', substr( $response, $pos, 1 ) );
// null terminated string, so length 0 = finished - return the hostname, without the trailing .
if ( $len[1] == 0 )
return substr( $host, 0, -1 );
// add segment to our host
$host .= substr( $response, $pos + 1, $len[1] ) . '.';
// move pointer on to the next segment
$pos += $len[1] + 1;
// recursion protection
$loops++;
}
while ( $len[1] != 0 && $loops < 20 );
// return the ip in case
return $ip;
}
?>
[#5] kexianbin at diyism dot com [2011-12-28 20:15:39]
My recursive unchunk function:
<?php
function unchunk($result)
{return preg_replace('/([0-9A-F]+)\r\n(.*)/sie',
'($cnt=@base_convert("\1", 16, 10))
?substr(($str=@strtr(\'\2\', array(\'\"\'=>\'"\', \'\\\\0\'=>"\x00"))), 0, $cnt).unchunk(substr($str, $cnt+2))
:""
',
$result
);
}
?>
[#6] Jeremy Saintot [2011-01-14 16:24:40]
Here is my fsockopen-based HTTP request fonction (GET and POST) :
<?php
function http_request(
$verb = 'GET',
$ip,
$port = 80,
$uri = '/',
$getdata = array(),
$postdata = array(),
$cookie = array(),
$custom_headers = array(),
$timeout = 1,
$req_hdr = false,
$res_hdr = false
)
{
$ret = '';
$verb = strtoupper($verb);
$cookie_str = '';
$getdata_str = count($getdata) ? '?' : '';
$postdata_str = '';
foreach ($getdata as $k => $v)
$getdata_str .= urlencode($k) .'='. urlencode($v) . '&';
foreach ($postdata as $k => $v)
$postdata_str .= urlencode($k) .'='. urlencode($v) .'&';
foreach ($cookie as $k => $v)
$cookie_str .= urlencode($k) .'='. urlencode($v) .'; ';
$crlf = "\r\n";
$req = $verb .' '. $uri . $getdata_str .' HTTP/1.1' . $crlf;
$req .= 'Host: '. $ip . $crlf;
$req .= 'User-Agent: Mozilla/5.0 Firefox/3.6.12' . $crlf;
$req .= 'Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*
set_time_limit(0);
$host = 'host';
$port = 'port';
$user = 'user';
$pass = 'pass';
$socket = fsockopen($host, $port) or die('Could not connect to: '.$host);
$userdota = "palma";
if($socket)
{
sendcmd("\r",$socket);
$status = "open"; // set status open
while($status=="open") //while we are connected to the server
{
$line = @fgets($socket, 1024) ;
/////////////login////////////////
if (strstr($line, "there is no guest account"))
{
sendcmd($user."\r\n",$socket);
sendcmd($pass."\r\n",$socket);
}
//////////////send command ////////////////////
if (strstr($line,"Your unique name: ".$user))
{ sendcmd("/finger ".$userdota."\r\n",$socket);
}
//////////////get email////////////////////
if (strstr($line,"email:")) // if respone server write "email:"
{
$pattern = '/email:(.*) ,/';
preg_match($pattern, $line, $matches);
fclose($socket);
$status="close"; // status close
$matches=str_replace(" ","", $matches);
$matches=str_replace(",is_operator:0,is_admin:0,","", $matches);
$matches=str_replace("email:","", $matches);
print $matches[0];
$email=$matches[0];
}
if (strstr($line,"ERROR: Invalid user.")) // if respone server write "ERROR: Invalid user."
{
fclose($socket);
$status="close";
$error ="Invalid User"; // error message
}
////////////login failed //////////////////////////
if (strstr($line, "Login failed")) // if respone server write "Login failed"
{
$error = "Login Failed"; // error message
fclose($socket);
$status="close";
}
flush(); // close
}
}
function sendcmd($cmd,$socket) // send command function
{
fputs($socket, $cmd, strlen($cmd));
}
?>
[#8] ken at kenmclean dot com dot au [2010-07-15 05:33:05]
Make sure you don't use a double line break ("\r\n\r\n") during the middle of your header, as it appears to end the header.
This means a \r\n\r\n before "Connection: close\r\n\r\n" will not correctly tell fsockopen to close the request, leading to a max timeout error.
Some of the code on this page does this. It took me days to figure out. Example:
<?php
// Wrong:
fwrite($fp, "GET / HTTP/1.1\r\n");
fwrite($fp, "Host: php.net\r\n");
fwrite($fp, "User-Agent: example\r\n\r\n");
fwrite($fp, "Connection: Close\r\n\r\n");
// Right:
fwrite($fp, "GET / HTTP/1.1\r\n" );
fwrite($fp, "Host: php.net\r\n");
fwrite($fp, "User-Agent: example\r\n");
fwrite($fp, "Connection: Close\r\n\r\n");
?>
[#9] SoupNazi [2010-05-18 11:58:28]
I would like to save people some time. I spent a couple hours trying to de-hunkify the response from apache2. I found out that if you simply make a 1.0 request vs. a 1.1 request you will get no hunks and so this simple script below will get the page you want in plain text, no hunks:
<?php
$data=false;
$url='www.example.com';
$fp = @fsockopen($url, 80, $errno, $errstr, 1);
if ($fp) {
stream_set_timeout($fp,1);
$out = "GET / HTTP/1.0\r\n";
$out .= "Host: www.example.com\r\n";
$out .= "Connection: Close\r\n\r\n";
if (fwrite($fp, $out)) {
$content='';
$header = "not yet";
while (!feof($fp)) {
$data=true;
$line=fgets($fp,128);
if ($line=="\r\n" && $header=="not yet") {
$header = "passed";
}
if ($header=="passed") {
$content.=$line;
}
}
fclose ($fp);
}
}
if (!$data) {
print "Unable to retrieve all or part of $url";
} else {
print "$content";
}
?>
I borrowed some of the script from another poster here - the portion removing the returned header.
[#10] steve at visual77 dot com [2010-02-12 10:23:51]
A short, quick unchunk function that makes use of regular expressions:
<?php
function unchunk($result) {
return preg_replace_callback(
'/(?:(?:\r\n|\n)|^)([0-9A-F]+)(?:\r\n|\n){1,2}(.*?)'.
'((?:\r\n|\n)(?:[0-9A-F]+(?:\r\n|\n))|$)/si',
create_function(
'$matches',
'return hexdec($matches[1]) == strlen($matches[2]) ? $matches[2] : $matches[0];'
),
$result
);
}
?>
[#11] nytro_rst at yahoo dot com [2010-01-12 02:26:33]
A simple proxy list checker. You can check a list ip:port if that port is opened on that IP.
<?php
$fisier = file_get_contents('proxy_list.txt'); // Read the file with the proxy list
$linii = explode("\n", $fisier); // Get each proxy
$fisier = fopen("bune.txt", "a"); // Here we will write the good ones
for($i = 0; $i < count($linii) - 1; $i++) test($linii[$i]); // Test each proxy
function test($proxy)
{
global $fisier;
$splited = explode(':',$proxy); // Separate IP and port
if($con = @fsockopen($splited[0], $splited[1], $eroare, $eroare_str, 3))
{
fwrite($fisier, $proxy . "\n"); // Check if we can connect to that IP and port
print $proxy . '<br>'; // Show the proxy
fclose($con); // Close the socket handle
}
}
fclose($fisier); // Close the file
?>
[#12] FaTe [2009-09-13 20:02:00]
In all header aspects I can understand for 3rd party content you may not be able to apply the following but for those reading pages where content being read by fsockopen is editable then I suggest adding a simple unique tag to the beginning of any page being read such as ":THISTAG:"
Cleaning the header contents becomes simplier when you can then use a method like split to grab your data like:
list($header,$data) = explode(":THISTAG:",$data);
[#13] walter [2009-07-30 08:05:24]
For some reason the default FreeBSD 7.0 port (jailed environment) breaks fsockopen() on SSL URLs, returning a constant stream of nothing! In my case this resulted in php-cgi bringing down lighttpd completely, in rapid time! Avoid FreeBSD/jails/fsockopen + SSL. Use curl_init() instead.
[#14] ghzero at ghzero dot de [2009-06-22 05:20:59]
note:
the default protocol - if not given - seems to be tcp://
[#15] oliver dot christen at camptocamp dot com [2009-06-21 03:17:02]
When downloading large files, it is not really efficient to put the whole server answer in memory before parsing the data to remove the header parts. Here is a simple way to do it while writing the data as it arrive:
<?php
// $socket is a valid fsockopen handle
$out = '';
$headerendfound = false;
$fp = fopen($fileTarget, 'w');
$buffer = '';
while (!feof($socket)) {
$out = fgets ($socket,16384);
if ($headerendfound) {
fwrite($fp, $out);
print '.';
}
if (!$headerendfound) {
$buffer .= $out;
print "searching for header\n";
$headerend = strpos($buffer, "\r\n\r\n");
if ($headerend !== false) {
$headerendfound = true;
fwrite($fp, substr($buffer, $headerend+4));
$buffer = '';
}
}
}
fclose($fp);
fclose($socket);
?>
[#16] andypsv at rcdrugs dot com [2009-06-16 13:15:42]
look at this smart ssl/http fsockopen function as a good solution for dealing with things
<?php
function _get($type,$host,$port='80',$path='/',$data='') {
$_err = 'lib sockets::'.__FUNCTION__.'(): ';
switch($type) { case 'http': $type = ''; case 'ssl': continue; default: die($_err.'bad $type'); } if(!ctype_digit($port)) die($_err.'bad port');
if(!empty($data)) foreach($data AS $k => $v) $str .= urlencode($k).'='.urlencode($v).'&'; $str = substr($str,0,-1);
$fp = fsockopen($host,$port,$errno,$errstr,$timeout=30);
if(!$fp) die($_err.$errstr.$errno); else {
fputs($fp, "POST $path HTTP/1.1\r\n");
fputs($fp, "Host: $host\r\n");
fputs($fp, "Content-type: application/x-www-form-urlencoded\r\n");
fputs($fp, "Content-length: ".strlen($str)."\r\n");
fputs($fp, "Connection: close\r\n\r\n");
fputs($fp, $str."\r\n\r\n");
while(!feof($fp)) $d .= fgets($fp,4096);
fclose($fp);
} return $d;
}
?>
[#17] Hyan Christian [2008-11-20 22:42:02]
To just take the HTTP content from fsockopen, better wait until feof finish to read the \r\n separator
<?php
//fsockopen, fputs..
$content = "";
$header = "not yet";
while( !feof( $pointer ) ) {
$line = fgets( $pointer, 128 );
if( $line == "\r\n" && $header == "not yet" ) {
$header = "passed";
}
if( $header == "passed" ) {
$content .= $line;
}
}
//fclose..
echo( substr( $content, 2 ) );
?>
[#18] Doug [2008-11-06 15:17:06]
[NOTE BY danbrown AT php DOT net: Updated version. Contains author-submitted bug fixes.]
Here is a way to get an array of cities / states for any zip code anywhere in the US. This example uses a $_GET variable to specify which zip code, but you can get it from any source you wish. This will return actual and acceptable zip code cities (according to USPS), but can be easily modified to include just the actual city.
<?php
if($_GET['zip'])
{
if(!($fp = fsockopen('zip4.usps.com', 80, $errno, $errstr)))
echo 'Could not connect to USPS! Error number: ' . $errno . '(' . $errstr . ')';
else
{
$poststring =
"GET /zip4/zcl_3_results.jsp?zip5=" . $_GET['zip'] . " HTTP/1.0\r\n" .
"Connection: close\r\n\r\n";
fputs($fp, $poststring);
$buffer = '';
while(!feof($fp))
$buffer .= fgets($fp, 128);
fclose($fp);
preg_match('/Actual City name(.*)/s', $buffer, $match);
$temp = explode('Not Acceptable', $match[1]);
// Capture city/state combination for all valid cities
preg_match_all('/headers="pre">(?:<b>)?([\w|\s]+), (\w+)/', $temp[0], $acceptable, PREG_SET_ORDER);
$values = array();
foreach($acceptable as $value)
$values[] =
array
(
'city' => $value[1],
'state' => $value[2]
);
if(count($values) == 0)
echo 'Zip could not be found in the database!';
}
}
else
echo 'Please specify a zip!';
?>
[#19] laisebrown at gmail dot com [2008-10-26 15:30:28]
When you're connecting through a proxy server you can't rely on fsockopen returning false to indicate that the connection has failed. (This also applies to fgets and fwrite.)
To check whether the proxy succeeded in contacting the real target host, you need to look for the http response code in the headers that get returned. Typically, if the proxy was unable to reach the host, you'll find a line containing something like:
HTTP/1.0 503 Service Unavailable
[#20] Anonymous [2008-10-12 05:26:46]
"system level connect()" is not further documented inside the php documentation so it is hard to find out more about error numbers.
someone suggest a more system-close way to find out more about error numbers here: http://www.askapache.com/php/fsockopen-socket.html (an interesting read about fsockopen anyway).
in my case i could debug to the fact that fsocketopen error number 16 was resulted in the inpossibility to resolve a hostname.
[#21] andrew at enigma-pro dot com [2008-09-09 08:28:49]
Notice using "tcp" insted of "http"
<?php
fsockopen("tcp://example.net",80 , $errno, $errstr, 30);
?>
[#22] mikey at badpenguins dot com [2008-09-06 09:00:09]
My $0.02 on handling chunked transfer encoded output... Has rudimentary error handling.
<?php
//
// Example usage...
//
$server = '127.0.0.1';
$port = '80';
$uri = '/cgi-bin/random-cgi';
$content = 'Your post content...';
$post_results = httpPost($server,$port,$uri,$content);
if (!is_string($post_results)) {
die('uh oh, something went wrong');
} else {
die('Here are your results: ' . $post_results);
}
//
// Post provided content to an http server and optionally
// convert chunk encoded results. Returns false on errors,
// result of post on success. This example only handles http,
// not https.
//
function httpPost($ip=null,$port=80,$uri=null,$content=null) {
if (empty($ip)) { return false; }
if (!is_numeric($port)) { return false; }
if (empty($uri)) { return false; }
if (empty($content)) { return false; }
// generate headers in array.
$t = array();
$t[] = 'POST ' . $uri . ' HTTP/1.1';
$t[] = 'Content-Type: text/html';
$t[] = 'Host: ' . $ip . ':' . $port;
$t[] = 'Content-Length: ' . strlen($content);
$t[] = 'Connection: close';
$t = implode("\r\n",$t) . "\r\n\r\n" . $content;
//
// Open socket, provide error report vars and timeout of 10
// seconds.
//
$fp = @fsockopen($ip,$port,$errno,$errstr,10);
// If we don't have a stream resource, abort.
if (!(get_resource_type($fp) == 'stream')) { return false; }
//
// Send headers and content.
//
if (!fwrite($fp,$t)) {
fclose($fp);
return false;
}
//
// Read all of response into $rsp and close the socket.
//
$rsp = '';
while(!feof($fp)) { $rsp .= fgets($fp,8192); }
fclose($fp);
//
// Call parseHttpResponse() to return the results.
//
return parseHttpResponse($rsp);
}
//
// Accepts provided http content, checks for a valid http response,
// unchunks if needed, returns http content without headers on
// success, false on any errors.
//
function parseHttpResponse($content=null) {
if (empty($content)) { return false; }
// split into array, headers and content.
$hunks = explode("\r\n\r\n",trim($content));
if (!is_array($hunks) or count($hunks) < 2) {
return false;
}
$header = $hunks[count($hunks) - 2];
$body = $hunks[count($hunks) - 1];
$headers = explode("\n",$header);
unset($hunks);
unset($header);
if (!verifyHttpResponse($headers)) { return false; }
if (in_array('Transfer-Encoding: chunked',$headers)) {
return trim(unchunkHttpResponse($body));
} else {
return trim($body);
}
}
//
// Validate http responses by checking header. Expects array of
// headers as argument. Returns boolean.
//
function validateHttpResponse($headers=null) {
if (!is_array($headers) or count($headers) < 1) { return false; }
switch(trim(strtolower($headers[0]))) {
case 'http/1.0 100 ok':
case 'http/1.0 200 ok':
case 'http/1.1 100 ok':
case 'http/1.1 200 ok':
return true;
break;
}
return false;
}
//
// Unchunk http content. Returns unchunked content on success,
// false on any errors... Borrows from code posted above by
// jbr at ya-right dot com.
//
function unchunkHttpResponse($str=null) {
if (!is_string($str) or strlen($str) < 1) { return false; }
$eol = "\r\n";
$add = strlen($eol);
$tmp = $str;
$str = '';
do {
$tmp = ltrim($tmp);
$pos = strpos($tmp, $eol);
if ($pos === false) { return false; }
$len = hexdec(substr($tmp,0,$pos));
if (!is_numeric($len) or $len < 0) { return false; }
$str .= substr($tmp, ($pos + $add), $len);
$tmp = substr($tmp, ($len + $pos + $add));
$check = trim($tmp);
} while(!empty($check));
unset($tmp);
return $str;
}
?>
[#23] admin at lab-9 dot com [2008-07-21 05:32:01]
When you try to POST/GET requests via HTTPS over SSL/TLS you should notice this:
<?php
// preconditions
$port = 80 | 443
$host = "www.example.com";
$method = "POST" | "GET";
$contenttype = "text/html" | "text/plain" | "text/xml" | ...;
$data = "<something>";
// script
if($port == 443)
$sslhost = "ssl://".$host;
else
$sslhost = $host;
$fp = fsockopen($sslhost, $port);
fputs($fp, "$method $path HTTP/1.1\r\n");
fputs($fp, "Host: $host\r\n");
fputs($fp, "Content-type: $contenttype\r\n");
fputs($fp, "Content-length: ".strlen($data)."\r\n");
fputs($fp, "Connection: close\r\n");
fputs($fp, "\r\n");
?>
The server usually does not understand the HTTP-header "Host: XXX" if you provide it with the trailing "ssl://" used by fsockopen(); If you do it anyway you probably get a HTTP 400 back as response. :-)
[#24] jabeba at web dot de [2008-04-17 06:21:39]
If you have to use a proxy to make requests outside of your local network, you may use this class:
<?php
class RemoteFopenViaProxy {
private $result;
private $proxy_name;
private $proxy_port;
private $request_url;
public function get_proxy_name() {
return $this->proxy_name;
}
public function set_proxy_name($n) {
$this->proxy_name = $n;
}
public function get_proxy_port() {
return $this->proxy_port;
}
public function set_proxy_port($p) {
$this->proxy_port = $p;
}
public function get_request_url() {
return $this->request_url;
}
public function set_request_url($u) {
$this->request_url = $u;
}
public function get_result() {
return $this->result;
}
public function set_result($r) {
$this->result = $r;
}
private function get_url_via_proxy() {
$proxy_fp = fsockopen($this->get_proxy_name(), $this->get_proxy_port());
if (!$proxy_fp) {
return false;
}
fputs($proxy_fp, "GET " . $this->get_request_url() . " HTTP/1.0\r\nHost: " . $this->get_proxy_name() . "\r\n\r\n");
while (!feof($proxy_fp)) {
$proxy_cont .= fread($proxy_fp, 4096);
}
fclose($proxy_fp);
$proxy_cont = substr($proxy_cont, strpos($proxy_cont, "\r\n\r\n") + 4);
return $proxy_cont;
}
private function get_url($url) {
$fd = @ file($url);
if ($fd) {
return $fd;
} else {
return false;
}
}
private function logger($line, $file) {
$fd = fopen($file . ".log", "a+");
fwrite($fd, date("Ymd G:i:s") . " - " . $file . " - " . $line . "\n");
fclose($fd);
}
function __construct($url, $proxy_name = "", $proxy_port = "") {
$this->set_request_url($url);
$this->set_proxy_name($proxy_name);
$this->set_proxy_port($proxy_port);
}
public function request_via_proxy() {
$this->set_result($this->get_url_via_proxy());
if (!$this->get_result()) {
$this->logger("FAILED: get_url_via_proxy(" . $this->get_proxy_name() . "," . $this->get_proxy_port() . "," . $this->get_request_url() . ")", "RemoteFopenViaProxyClass.log");
}
}
public function request_without_proxy() {
$this->set_result($this->get_url($this->get_request_url()));
if (!$this->get_result()) {
$this->logger("FAILED: get_url(" . $url . ")", "RemoteFopenViaProxyClass.log");
}
}
}
?>
Use it this way:
<?php
// call constructor
$obj = new RemoteFopenViaProxy($insert_request_url, $insert_proxy_name, $insert_proxy_port);
// change settings after object generation
$obj->set_proxy_name($insert_proxy_name);
$obj->set_proxy_port($insert_proxy_port);
$obj->set_request_url($insert_request_url);
$obj->request_via_proxy();
echo $obj->get_result();
?>
If there are errors during execution, the script tries to write some useful information into a log file.
[#25] dot dot dot dot dot alexander at gmail dot com [2008-03-08 07:15:37]
An edit to my below function for extra headers support and a bit of debugging
( array("key" => "value") type)
<?php
if(!function_exists("download")){
function download($uri, $port = 80, $extra_headers = NULL){
if(!function_exists("stripos")){
function stripos($str, $needle, $offset=0){
return strpos(strtolower($str),strtolower($needle),$offset);
}
}
if(!is_int($port))$port = 80;
if(!is_array($extra_headers))$extra_headers = array();
$uri = strtr( strval($uri), array("http://" => "", "https://" => "ssl://", "ssl://" => "ssl://", "\\" => "/", "//" => "/") );
if( ( $protocol = stripos($uri, "://") ) !== FALSE ){
if( ( $domain_pos = stripos($uri, "/", ($protocol + 3)) ) !== FALSE ){
$domain = substr($uri, 0, $domain_pos);
$file = substr($uri, $domain_pos);
}
else{
$domain = $uri;
$file = "/";
}
}
else{
if( ( $domain_pos = stripos($uri, "/") ) !== FALSE ){
$domain = substr($uri, 0, $domain_pos);
$file = substr($uri, $domain_pos);
}
else{
$domain = $uri;
$file = "/";
}
}
$fp = fsockopen($domain, $port, $errno, $errstr, 30);
if(!$fp){
return FALSE;
}
else{
$out = "GET " . $file . " HTTP/1.1\r\n";
$out .= "Host: " . $domain . "\r\n";
foreach( $extra_headers as $nm => $vl ){
$out .= strtr( strval($nm), array( "\r" => "", "\n" => "", ": " => "", ":" => "") ) . ": " . strtr( strval($vl), array( "\r" => "", "\n" => "", ": " => "", ":" => "") ) . "\r\n";
}
$out .= "Connection: Close\r\n\r\n";
$response = "";
fwrite($fp, $out);
while (!feof($fp)) {
$response .= fgets($fp, 128);
}
fclose($fp);
global $http_response_header;
$http_response_header = array();
if( stripos($response, "\r\n\r\n") !== FALSE ){
$hc = explode("\r\n\r\n", $response);
$headers = explode("\r\n", $hc[0]);
if(!is_array($headers))$headers = array();
foreach($headers as $key => $header){
$a = "";
$b = "";
if( stripos($header, ":") !== FALSE ){
list($a, $b) = explode(":", $header);
$http_response_header[trim($a)] = trim($b);
}
}
return end($hc);
}
else if( stripos($response, "\r\n") !== FALSE ){
$headers = explode("\r\n", $response);
if(!is_array($headers))$headers = array();
foreach($headers as $key => $header){
if( $key < ( count($headers) - 1 ) ){
$a = "";
$b = "";
if( stripos($header, ":") !== FALSE ){
list($a, $b) = explode(":", $header);
$http_response_header[trim($a)] = trim($b);
}
}
}
return end($headers);
}
else{
return $response;
}
}
}
}
?>
[#26] huli0401 at gmail dot com [2007-12-27 09:12:20]
<?php
// Check for new version
$current_version = explode('.', '1.0.00');
$minor_revision = (int) $current_version[2];
$errno = 0;
$errstr = $version_info = '';
if ($fsock = fsockopen("www.exanmple.eu", 80, $errno, $errstr, 30))
{
@fputs($fsock, "GET /ver.txt HTTP/1.1\r\n");
@fputs($fsock, "HOST: www.example.eu\r\n");
@fputs($fsock, "Connection: close\r\n\r\n");
$get_info = false;
while (!@feof($fsock))
{
if ($get_info)
{
$version_info .= @fread($fsock, 1024);
}
else
{
if (@fgets($fsock, 1024) == "\r\n")
{
$get_info = true;
}
}
}
@fclose($fsock);
$version_info = explode("\n", $version_info);
$latest_head_revision = (int) $version_info[0];
$latest_minor_revision = (int) $version_info[2];
$latest_version = (int) $version_info[0] . '.' . (int) $version_info[1] . '.' . (int) $version_info[2];
if ($latest_head_revision == 2 && $minor_revision == $latest_minor_revision)
{
$version_info = '<p style="color:green">OK</p>';
}
else
{
$version_info = '<p style="color:red">neaktualne';
$version_info .= '<br />'Latest_version_info' . $latest_version) . ' ' . sprintf(Current_version_info'. '1.0.00') . '</p>';
}
}
else
{
if ($errstr)
{
$version_info = '<p style="color:red">' . sprintf(Connect_socket_error) . '</p>';
}
else
{
$version_info = '<p>'Socket_functions_disabled'</p>';
}
}
$version_info .= '<p>'Mailing_list_subscribe_reminder'</p>';
echo $version_info;
?>
[#27] anarchy [2007-09-04 18:34:49]
The DEFAULT stream timeout is set according to default_socket_timeout in your php.ini file. Took forever for me to dig that up....
[#28] Adlez [2007-08-04 01:32:52]
For those of you who do not have cURL, you might want to try this.
It doesn't have all the functions that cURL has, but it has the basics.
Please let me know of any bugs or problems.
<?php
function open_page($url,$f=1,$c=2,$r=0,$a=0,$cf=0,$pd=""){
global $oldheader;
$url = str_replace("http://","",$url);
if (preg_match("#/#","$url")){
$page = $url;
$url = @explode("/",$url);
$url = $url[0];
$page = str_replace($url,"",$page);
if (!$page || $page == ""){
$page = "/";
}
$ip = gethostbyname($url);
}else{
$ip = gethostbyname($url);
$page = "/";
}
$open = fsockopen($ip, 80, $errno, $errstr, 60);
if ($pd){
$send = "POST $page HTTP/1.0\r\n";
}else{
$send = "GET $page HTTP/1.0\r\n";
}
$send .= "Host: $url\r\n";
if ($r){
$send .= "Referer: $r\r\n";
}else{
if ($_SERVER['HTTP_REFERER']){
$send .= "Referer: {$_SERVER['HTTP_REFERER']}\r\n";
}
}
if ($cf){
if (@file_exists($cf)){
$cookie = urldecode(@file_get_contents($cf));
if ($cookie){
$send .= "Cookie: $cookie\r\n";
$add = @fopen($cf,'w');
fwrite($add,"");
fclose($add);
}
}
}
$send .= "Accept-Language: en-us, en;q=0.50\r\n";
if ($a){
$send .= "User-Agent: $a\r\n";
}else{
$send .= "User-Agent: {$_SERVER['HTTP_USER_AGENT']}\r\n";
}
if ($pd){
$send .= "Content-Type: application/x-www-form-urlencoded\r\n";
$send .= "Content-Length: " .strlen($pd) ."\r\n\r\n";
$send .= $pd;
}else{
$send .= "Connection: Close\r\n\r\n";
}
fputs($open, $send);
while (!feof($open)) {
$return .= fgets($open, 4096);
}
fclose($open);
$return = @explode("\r\n\r\n",$return,2);
$header = $return[0];
if ($cf){
if (preg_match("/Set\-Cookie\: /i","$header")){
$cookie = @explode("Set-Cookie: ",$header,2);
$cookie = $cookie[1];
$cookie = explode("\r",$cookie);
$cookie = $cookie[0];
$cookie = str_replace("path=/","",$cookie[0]);
$add = @fopen($cf,'a');
fwrite($add,$cookie,strlen($read));
fclose($add);
}
}
if ($oldheader){
$header = "$oldheader<br /><br />\n$header";
}
$header = str_replace("\n","<br />",$header);
if ($return[1]){
$body = $return[1];
}else{
$body = "";
}
if ($c === 2){
if ($body){
$return = $body;
}else{
$return = $header;
}
}
if ($c === 1){
$return = $header;
}
if ($c === 3){
$return = "$header$body";
}
if ($f){
if (preg_match("/Location\:/","$header")){
$url = @explode("Location: ",$header);
$url = $url[1];
$url = @explode("\r",$url);
$url = $url[0];
$oldheader = str_replace("\r\n\r\n","",$header);
$l = "Location:";
$oldheader = str_replace("Location:",$l,$oldheader);
return open_page($url,$f,$c,$r,$a,$cf,$pd);
}else{
return $return;
}
}else{
return $return;
}
}
/////////////
////Usage////
/////////////
$url = "http://www.php.net";
$f = 1;
$c = 2;//1 for header, 2 for body, 3 for both
$r = NULL;
$a = NULL;
$cf = NULL;
$pd = NULL;
$page = open_page($url,$f,$c,$r,$a,$cf,$pd);
print $page;
?>
[#29] bradland at umich dot edu [2007-07-23 09:32:08]
I was having trouble doing an https in fopen and with fsockopen where the address had ssl://. I was getting error code 114 in the log. After much research i found that there was some ssl conflict trouble with MySQL 5.0.20-5.0.33. It had some functions that were interfering with openssl that showed up in the php install.
http://bugs.mysql.com/bug.php?id=21930
http://bugs.mysql.com/bug.php?id=19289
[#30] warezthebeef at gmail dot com [2007-07-17 04:37:59]
I ran into a problem where I needed to make an fsockopen() style connection from one specific ip address on a server with multiple ip aliases. Unfortunately fsockopen() does not allow the specification of a source address making it unsuitable. I could not find any other solutions elsewhere so here is mine for those with php 5.1.0 or greater.
<?php
// connect to the internet using the '192.168.0.100' IP
$opts = array('socket' => array('bindto' => '192.168.0.100:0'));
$context = stream_context_create($opts);
$fp = stream_socket_client("tcp://www.example.com:80", $errno, $errstr, 30, STREAM_CLIENT_CONNECT, $context);
?>
Now $fp can be used like a resource handle returned by a vanilla fsockopen() call!
[#31] Alexander Wegener [2007-05-26 07:29:17]
To check if a Url is Online (with http and https)
Using @fgets to hide Warning when using SSL
(Bug: "Warning: function.fgets SSL: fatal protocol error", http://bugs.php.net/bug.php?id=23220)
<?php
function isOnline($url) {
if (!$url_info = parse_url($url)) {
return false;
}
switch ($url_info['scheme']) {
case 'https':
$scheme = 'ssl://';
$port = 443;
break;
case 'http':
default:
$scheme = '';
$port = 80;
}
$data = "";
$fid = @fsockopen($scheme . $url_info['host'], $port, $errno, $errstr, 30);
if ($fid) {
fputs($fid, 'HEAD ' . (isset($url_info['path'])? $url_info['path']: '/') . (isset($url_info['query'])? '?' . $url_info['query']: '') . " HTTP/1.0\r\n" .
"Connection: close\r\n" .
'Host: ' . $url_info['host'] . "\r\n\r\n");
while (!feof($fid)) {
$data .= @fgets($fid, 128);
}
fclose($fid);
return !empty($data);
} else {
return false;
}
}
?>
[#32] ryan1_00 at hotmail dot com [2007-01-29 07:52:10]
This script checks specific ports so you need to have the correct port open on the server for this to work.
E.g if i have a windows domain controller and it is servering LDAP then the following would be used to check it is online:
<?php
chkServer("MyDC", "389");
?>
for a webserver:
<?php
chkServer("MyWebSvr", "80");
?>
etc etc
--------------------------------------------------------
<?php
// check if a server is up by connecting to a port
function chkServer($host, $port)
{
$hostip = @gethostbyname($host); // resloves IP from Hostname returns hostname on failure
if ($hostip == $host) // if the IP is not resloved
{
echo "Server is down or does not exist";
}
else
{
if (!$x = @fsockopen($hostip, $port, $errno, $errstr, 5)) // attempt to connect
{
echo "Server is down";
}
else
{
echo "Server is up";
if ($x)
{
@fclose($x); //close connection
}
}
}
}
?>
[#33] v13+phpnet at it dot teithe dot gr [2007-01-24 15:01:38]
The following function performs pop3 authentication. Returns NULL on error, or true/false to indicate username/password matching:
$address is the hostname of the server and $ssl is a boolean that indicates whether an SSL connection is requested.
<?php
function pop3authCheck($username, $password, $address, $ssl)
{
if ($ssl)
$uri="ssl://$address:995";
else
$uri="tcp://$address:110";
$fp=fsockopen($uri);
if (!$fp)
return(NULL);
$st=fgets($fp, 512);
if (substr($st, 0, 3)!="+OK")
{
fclose($fp);
return(NULL);
}
$st="USER $username\n";
if (fwrite($fp, $st)!=strlen($st))
{
fclose($fp);
return(NULL);
}
$st=fgets($fp, 512);
if (substr($st, 0, 3)!="+OK")
{
fclose($fp);
return(NULL);
}
$st="PASS $password\n";
if (fwrite($fp, $st)!=strlen($st))
{
fclose($fp);
return(NULL);
}
$st=fgets($fp, 512);
fclose($fp);
if (substr($st, 0, 3)=="+OK")
return(true);
else if (substr($st, 0, 4)=="+ERR")
return(false);
else
return(NULL);
}
?>
[#34] [2006-12-04 08:34:58]
I've had issues with some of the handlers for chunked http 1.1 responses. Here's a method that worked for me, if it works for you as well, then cheers :P
<?php
function httpSocketConnection($host, $method, $path, $data)
{
$method = strtoupper($method);
if ($method == "GET")
{
$path.= '?'.$data;
}
$filePointer = fsockopen($host, 80, $errorNumber, $errorString);
if (!$filePointer)
{
logEvent('debug', 'Failed opening http socket connection: '.$errorString.' ('.$errorNumber.')<br/>\n');
return false;
}
$requestHeader = $method." ".$path." HTTP/1.1\r\n";
$requestHeader.= "Host: ".$host."\r\n";
$requestHeader.= "User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1) Gecko/20061010 Firefox/2.0\r\n";
$requestHeader.= "Content-Type: application/x-www-form-urlencoded\r\n";
if ($method == "POST")
{
$requestHeader.= "Content-Length: ".strlen($data)."\r\n";
}
$requestHeader.= "Connection: close\r\n\r\n";
if ($method == "POST")
{
$requestHeader.= $data;
}
fwrite($filePointer, $requestHeader);
$responseHeader = '';
$responseContent = '';
do
{
$responseHeader.= fread($filePointer, 1);
}
while (!preg_match('/\\r\\n\\r\\n$/', $responseHeader));
if (!strstr($responseHeader, "Transfer-Encoding: chunked"))
{
while (!feof($filePointer))
{
$responseContent.= fgets($filePointer, 128);
}
}
else
{
while ($chunk_length = hexdec(fgets($filePointer)))
{
$responseContentChunk = '';
logEventToTextFile('debug', $chunk_length);
$read_length = 0;
while ($read_length < $chunk_length)
{
$responseContentChunk .= fread($filePointer, $chunk_length - $read_length);
$read_length = strlen($responseContentChunk);
}
$responseContent.= $responseContentChunk;
fgets($filePointer);
}
}
logEventToTextFile('debug', $responseContent);
return chop($responseContent);
}
?>
[#35] yadiutama_skom at yahoo dot com [2006-04-07 02:09:25]
This is a simple example for sending and retrieve SOAP message by using fsockopen:
<?php
$fp = @fsockopen("www.example.com", 80, $errno, $errstr);
if (!$fp) {
echo "$errstr ($errno)<br />\n";
} else {
$soap_out = "POST /example/exampleServer.php HTTP/1.0\r\n";
$soap_out .= "Host: www.example.com\r\n";
$soap_out .= "User-Agent: MySOAPisOKGuys \r\n";
$soap_out .= "Content-Type: text/xml; charset=ISO-8859-1\r\n";
$soap_out .= "Content-Length: 512\r\n\r\n";
$soap_out .= '<?xml version="1.0" encoding="ISO-8859-1"?>
<SOAP-ENV:Envelope SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/">
<SOAP-ENV:Body>
<ns5973:contact xmlns:ns5973="http://tempuri.org">
<__numeric_0><id xsi:nil="true"/></__numeric_0>
</ns5973:contact>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>';
fputs($fp, $soap_out, strlen($soap_out)); // send request SOAP
echo "<xmp>".$out."</xmp>";
while (!feof($fp)) {
$soap_in . = fgets($fp, 100);
}
echo "<xmp>$soap_in</xmp>"; //display response SOAP
fclose($fp);
}
?>
And this is an example result:
POST /soap/example/contactServer.php HTTP/1.0
Host: www.example.com
User-Agent: MySOAPisOKGuys
Content-Type: text/xml; charset=ISO-8859-1
Content-Length: 512
<?phpxml version="1.0" encoding="ISO-8859-1"?>
<SOAP-ENV:Envelope
SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/">
<SOAP-ENV:Body><ns5973:contact
xmlns:ns5973="http://tempuri.org"><__numeric_0><id
xsi:nil="true"/></__numeric_0></ns5973:contact>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
HTTP/1.1 200 OK
Date: Thu, 06 Apr 2006 07:03:26 GMT
Server: Apache/1.3.23 (Win32)
X-Powered-By: PHP/4.1.1
X-SOAP-Server: MySOAPisOKGuys
Content-Length: 625
Connection: close
Content-Type: text/xml; charset=ISO-8859-1
<?phpxml version="1.0" encoding="ISO-8859-1"?>
<SOAP-ENV:Envelope
SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/">
<SOAP-ENV:Body><ns1:contactResponse
xmlns:ns1="http://tempuri.org">
<return xsi:type="xsd:string">
</return>
</ns1:contactResponse>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
[#36] Duukkis [2006-02-27 05:13:08]
Lots of tries and lots of reading http-headers...
If you want to post $_POST vars and (in this case) one file named userfile to $remote_server and $remote_url.
<?php
// get the necessary data
$file_name = $_FILES['userfile']['name']; // the file
$tmp_name = $_FILES['userfile']['tmp_name']; // the file
$content_type = $_FILES['userfile']['type']; // the file mime type
srand((double)microtime()*1000000);
$boundary = "---------------------".substr(md5(rand(0,32000)),0,10);
// Build the header
$header = "POST $remote_url HTTP/1.0\r\n";
$header .= "Host: $remote_server\r\n";
$header .= "Content-type: multipart/form-data, boundary=$boundary\r\n";
// attach post vars
foreach($_POST AS $index => $value){
$data .="--$boundary\r\n";
$data .= "Content-Disposition: form-data; name=\"".$index."\"\r\n";
$data .= "\r\n".$value."\r\n";
$data .="--$boundary\r\n";
}
// and attach the file
$data .= "--$boundary\r\n";
$content_file = join("", file($tmp_name));
$data .="Content-Disposition: form-data; name=\"userfile\"; filename=\"$file_name\"\r\n";
$data .= "Content-Type: $content_type\r\n\r\n";
$data .= "".$content_file."\r\n";
$data .="--$boundary--\r\n";
$header .= "Content-length: " . strlen($data) . "\r\n\r\n";
// Open the connection
$fp = fsockopen($remote_server, 80);
// then just
fputs($fp, $header.$data);
fclose($fp);
?>
[#37] ittasks at gmail dot com [2006-02-15 16:02:53]
login to the site prior to downloading page:
In some wierd situations site security is based on
ASPSESSION ID and where could be a
login asp script in one place, and the actual page with
information in another place.
for such cases you have to submit ( POST ) you login and
password first, when grab ASP session (and also some
cookies from response, and when use that ASP SESSION in
second request to the actual page: (i took some parts of
codes from other ppl)
<?php
//submit login form: (url, post data, extra headers (optional))
//do not put http into URL, just domain name
$mycookies = GetCookies("www.yourdomain.com/login.login.asp",
"password=12345&username=your_username&submit=LOGIN&set=Y","");
//some extra params if you need them
// echo "Cookies:<br><pre>\n".$mycookies."\n</pre>";
//$body =PostPage("www.example.com/coolpage.asp",
//"action=zzz",$mycookies);
//echo "<br>Body:<br>\n".$body."\n";
//im using get page - so it goes like this:
$opts = array('http'=>array('method'=>"GET",
'header'=>"Accept-language: en\r\nCookie: ".$mycookies."\r\n" ));
$context = stream_context_create($opts);
$fp = fopen('http://www.example.com/coolpage.asp?p1=1&p2=23', 'r', false, $context);
fpassthru($fp);
$html = fread($fp, 1000000);
fclose($fp);
echo $html;
function PostPage($host,$query,$others=''){
$path=explode('/',$host);
$host=$path[0];
unset($path[0]);
$path='/'.(implode('/',$path));
$post="POST $path HTTP/1.1\r\nHost: $host\r\n";
$post.="Content-type: application/x-www-form-";
$post.="urlencoded\r\n${others}";
$post.="User-Agent: Mozilla 4.0\r\nContent-length: ";
$post.=strlen($query)."\r\nConnection: close\r\n\r\n$query";
$h=fsockopen($host,80);
fwrite($h,$post);
for($a=0,$r='';!$a;){
$b=fread($h,8192);
$r.=$b;
$a=(($b=='')?1:0);
}
fclose($h);
return $r;
}
function GetCookies($host,$query,$others=''){
$path=explode('/',$host);
$host=$path[0];
unset($path[0]);
$crlf = "\r\n";
$path='/'.(implode('/',$path));
$post="POST $path HTTP/1.1\r\nHost: $host\r\n";
$post.="Content-type: application/x-www-form-urlencoded\r\n${others}";
$post.="User-Agent: Mozilla 4.0\r\nContent-length: ";
$post.=strlen($query)."\r\nConnection: close\r\n\r\n$query";
$h=fsockopen($host,80);
fwrite($h,$post);
$r="";
for($a=0;!$a;){
$b=fread($h,512);
echo $b;
$r.=$b;
$gotSession=strpos($r,"ASPSESSION");
if($gotSession)
if(strpos($r, $crlf . $crlf,$gotSession)>0) break;
$a=(($b=='')?1:0);
}
fclose($h);
$arr = split("Set-Cookie:",$r);
$AllCookies="";$count=1;
while ($count < count($arr)) {
$AllCookies.=substr($arr[$count].";",
0,strpos($arr[$count].";",";")+1);
$count++;}
return $AllCookies;
}
?>
It's not optimized , but i hope someone might find it usefull.
Best Regards
DRY_GIN
[#38] sivann at cs dot ntua dot gr [2005-12-09 07:40:30]
This is an ident request example. If your client is running identd your real username will be known by the server.
It is also usefull to identify people bypassing IP ACLs by using SOCKS proxy and dynamic IP forwarding. If the socks proxy server uses ident (most unices do) you will know his real username.
For more information see RFC1413
Timeout of 2 seconds in the example may not be enough.
<?php
error_reporting(E_ALL);
$remip = $HTTP_SERVER_VARS['REMOTE_ADDR'];
$remport = $HTTP_SERVER_VARS['REMOTE_PORT'];
ob_implicit_flush();
$fp = fsockopen($remip, 113, $errno, $errstr, 2);
if (!$fp) {
echo "$errstr ($errno)<br>\n";
exit;
}
else {
$out = "$remport, 80\r\n";
fwrite($fp, $out);
$answer=fgets($fp, 128);
}
fclose($fp);
$ansparts=explode(":",$answer);
$user=chop($ansparts[3]);
echo "You are $user@$remip:$remport";
?>
[#39] Kiki_EF [2005-10-27 00:20:37]
Additional ICQ status request over proxy
<?php
function icq_uin($uin)
{
if (! is_numeric($uin))
return false;
$proxy_name = 'proxy.mydomain.de';
$proxy_port = 8080;
$proxy_user = "";
$proxy_pass = "";
$proxy_cont = '';
$request_url = "http://status.icq.com/online.gif?icq=$uin";
$proxy_fp = fsockopen($proxy_name, $proxy_port);
if (!$proxy_fp)
return false;
fputs($proxy_fp, "GET $request_url HTTP/1.0\r\nHost: $proxy_name\r\n");
fputs($proxy_fp, "Proxy-Authorization: Basic ". base64_encode ("$proxy_user:$proxy_pass")."\r\n\r\n");
while(!feof($proxy_fp)){
$proxy_cont .= fread($proxy_fp,4096);
}
fclose($proxy_fp);
$proxy_cont = substr($proxy_cont, strpos($proxy_cont,"\r\n\r\n")+4);
if (strstr($proxy_cont, 'online1'))
return 'online';
if (strstr($proxy_cont, 'online0'))
return 'offline';
if (strstr($proxy_cont, 'online2'))
return 'disabled';
}
echo "User is ".icq_uin(123456789012345);
?>
Thanx
[EDIT BY danbrown AT php DOT net: Based on code provided in a note by (rafaelbc AT matrix DOT com DOT br) on 23-MAY-09, which has since been removed.]
[#40] robin at pozytron dot com [2005-08-21 15:38:48]
I have found, when using fsockopen() and the POST method, that using HTTP/1.1 is VERY significantly slower than HTTP/1.0 (at least for the server I'm querying, an Orion-based server). Also, using cURL tended to be faster than fsockopen(), though only slightly. For example, here was a recent set of data (for the same exact request in each case):
cURL: 4.2sec
fsockopen() HTTP/1.0: 4.9sec
fsockopen() HTTP/1.1: 19.9sec (!)
I'm not sure why this was occurring. Perhaps it has something to do with the Orion server, which I have little experience with. However, it was not a fluke, and I double-checked the code to make sure there were no errors.
EDITORS NOTE: HTTP/1.1 uses persistent connection causing this delay. Use "Connection: close" header to disable it.
[#41] dna at revold-design dot de [2005-08-10 05:04:28]
Something useful for ICQ:
<?php
$icquin = "197829943";
function GetICQ($uin) {
if (!is_numeric($uin)) return FALSE;
$fp = fsockopen('status.icq.com', 80, $errno, $errstr, 8);
if (!$fp) {
return "N/A";
}
else {
$request = "HEAD /online.gif?icq=$uin HTTP/1.0\r\n"
."Host: web.icq.com\r\n"
."Connection: close\r\n\r\n";
fputs($fp, $request);
do {
$response = fgets($fp, 1024);
}
while (!feof($fp) && !stristr($response, 'Location'));
fclose($fp);
if (strstr($response, 'online1')) return 'Online';
if (strstr($response, 'online0')) return 'Offline';
if (strstr($response, 'online2')) return 'N/A';
// N/A means, this User set the Option, his Online
// Status cannot be shown over the Internet
return FALSE;
}
}
echo GetICQ($icquin);
?>
[#42] richard dot lajaunie at cote-azur dot cci dot fr [2005-05-19 00:10:08]
<?php
if ( array_key_exists(1, $argv) ){
$cfgServer = $argv[1];
}else{
echo "ex: 'php test.php 10.0.0.0' \n";
exit;
}
$cfgPort = 23; //port, 22 if SSH
$cfgTimeOut = 10;
$usenet = fsockopen($cfgServer, $cfgPort, $errno, $errstr), $cfgTimeOut);
if(!$usenet){
echo "Connexion failed\n";
exit();
}else{
echo "Connected\n";
fputs ($usenet, "password\r\n");
fputs ($usenet, "en\r\n");
fputs ($usenet, "password\r\n");
fputs ($usenet, "sh mac-address-table\r\n");
fputs ($usenet, " "); // this space bar is this for long output
// this skip non essential text
$j = 0;
while ($j<16){
fgets($usenet, 128);
$j++;
}
stream_set_timeout($usenet, 2); // set the timeout for the fgets
$j = 0;
while (!feof($usenet)){
$ret = fgets($usenet, 128);
$ret = str_replace("\r", '', $ret);
$ret = str_replace("\n", "", $ret);
if (ereg("FastEthernet", $ret)){
echo "$ret \n";
}
if (ereg('--More--', $ret) ){
fputs ($usenet, " "); // for following page
}
$info = stream_get_meta_data($usenet);
if ($info['timed_out']) {
$j++;
}
if ($j >2){
fputs ($usenet, "lo");
break;
}
}
}
echo "End.\r\n";
?>
[#43] saul dot dobney at dobney dot com [2005-04-19 08:40:50]
If you are using fsockopen to access webpage, but come across a redirect (Location: ) in the header and want to find and follow the redirect as in this snippet:
<?php
while (!feof($fp)) {
$line=fgets($fp, 1024);
if (stristr($line,"location:")!="") {
$redirect=preg_replace("/location:/i","",$line);
}
}
?>
Then don't forget to
<?php $redirect = trim($redirect); ?>
before trying to follow this new link as $redirect actually has a \r\n on the end of it and won't give you a valid path in the next iteration otherwise. A six hour bug.
Saul Dobney
[#44] ahauk at NO-SPAM dot synergynt dot net [2005-03-28 14:38:11]
The following script will login to a POP3 account using the username, password and server name provided via a standard form; determine the amount of messages using a binary search; then purge all messages.
<?php
$server = $_POST["server"];
$user = $_POST["user"];
$pass = $_POST["pass"];
$count = 1;
$low = 0;
$mid = 0;
$high = 100000;
$connection = fsockopen($server, 110, $errno, $errstr, 30);
if(!$connection) {
print "Connect Failed: $errstr ($errno)";
} else {
$output = fgets($connection, 128);
fputs($connection, "user $user\n");
$output = fgets($connection, 128);
fputs($connection, "pass $pass\n");
$output = fgets($connection, 128);
while($low < $high - 1) {
$mid = floor(($low + $high) / 2);
fputs($connection, "list $mid\n");
$output = fgets($connection, 128);
$subout = substr($output, 0, 4);
if($subout == "+OK ") {
$low = $mid;
continue;
}
elseif($subout == "-ERR") {
$high = $mid;
continue;
} else {
break;
print "An error has occurred. Please try again.";
}
}
$limit = $mid - 1;
while($count <= $limit) {
fputs($connection, "dele $count\n");
fgets($connection, 128);
$count = $count + 1;
}
fputs($connection, "quit\n");
}
fclose($connection);
print "Successfully removed $limit messages.";
?>
[#45] lukas at MORESPAM dot jhu dot edu [2005-03-05 07:29:39]
Here's a function that I needed and couldn't use CURL... it helps you if you want to send the POST data (instead of GET) from one form to 2 or more other PHP scripts. Trust me... it's a life saver!!
<?php
function HTTP_Post($URL,$data, $referrer="") {
// parsing the given URL
$URL_Info=parse_url($URL);
// Building referrer
if($referrer=="") // if not given use this script as referrer
$referrer=$_SERVER["SCRIPT_URI"];
// making string from $data
foreach($data as $key=>$value)
$values[]="$key=".urlencode($value);
$data_string=implode("&",$values);
// Find out which port is needed - if not given use standard (=80)
if(!isset($URL_Info["port"]))
$URL_Info["port"]=80;
// building POST-request:
$request.="POST ".$URL_Info["path"]." HTTP/1.1\n";
$request.="Host: ".$URL_Info["host"]."\n";
$request.="Referer: $referer\n";
$request.="Content-type: application/x-www-form-urlencoded\n";
$request.="Content-length: ".strlen($data_string)."\n";
$request.="Connection: close\n";
$request.="\n";
$request.=$data_string."\n";
$fp = fsockopen($URL_Info["host"],$URL_Info["port"]);
fputs($fp, $request);
while(!feof($fp)) {
$result .= fgets($fp, 128);
}
fclose($fp);
return $result;
}
$output1=HTTP_Post("http://www.example.com/script1.php",$_POST);
$output2=HTTP_Post("http://www.example.net/script2.php",$_POST);
?>
[#46] dante at dantecubed dot com [2005-02-23 16:00:24]
You may be able to speed this function up by using an IP address instead of a domain. PHP uses getHostByAddr internally in this function anyway, so you can save a step in the function process.
[#47] konrad dot meyer at gmail dot com [2005-02-12 13:34:20]
The documentation example is of a GET request. I have found POST documentation to be lacking, and here's a function to easily simulate submitting form data:
<?php
# $host includes host and path and filename
# ex: "myserver.com/this/is/path/to/file.php"
# $query is the POST query data
# ex: "a=thisstring&number=46&string=thatstring
# $others is any extra headers you want to send
# ex: "Accept-Encoding: compress, gzip\r\n"
function post($host,$query,$others=''){
$path=explode('/',$host);
$host=$path[0];
unset($path[0]);
$path='/'.(implode('/',$path));
$post="POST $path HTTP/1.1\r\nHost: $host\r\nContent-type: application/x-www-form-urlencoded\r\n${others}User-Agent: Mozilla 4.0\r\nContent-length: ".strlen($query)."\r\nConnection: close\r\n\r\n$query";
$h=fsockopen($host,80);
fwrite($h,$post);
for($a=0,$r='';!$a;){
$b=fread($h,8192);
$r.=$b;
$a=(($b=='')?1:0);
}
fclose($h);
return $r;
}
?>
[#48] edwin at bitstorm dot org [2004-12-02 05:50:54]
Here's a function to just fetch the contents behind an URL.
<?php
function fetchURL( $url ) {
$url_parsed = parse_url($url);
$host = $url_parsed["host"];
$port = $url_parsed["port"];
if ($port==0)
$port = 80;
$path = $url_parsed["path"];
if ($url_parsed["query"] != "")
$path .= "?".$url_parsed["query"];
$out = "GET $path HTTP/1.0\r\nHost: $host\r\n\r\n";
$fp = fsockopen($host, $port, $errno, $errstr, 30);
fwrite($fp, $out);
$body = false;
while (!feof($fp)) {
$s = fgets($fp, 1024);
if ( $body )
$in .= $s;
if ( $s == "\r\n" )
$body = true;
}
fclose($fp);
return $in;
}
?>
[#49] michiel at parse dot nl [2004-10-25 04:42:00]
The following snippet allows you to retrieve the title of a page.
Great for rewriting auto-url detectors to display the actual title rather then http://...
<?php
echo get_url_title("http://www.php.net/cal.php?id=409");
function get_url_title($url, $timeout = 2)
{
$url = parse_url($url);
if(!in_array($url['scheme'],array('','http')))
return;
$fp = fsockopen ($url['host'], ($url['port'] > 0 ? $url['port'] : 80), $errno, $errstr, $timeout);
if (!$fp)
{
return;
// echo "$errstr ($errno)<br>\n";
}
else
{
fputs ($fp, "GET /".$url['path'].($url['query'] ? '?'.$url['query'] : '')." HTTP/1.0\r\nHost: ".$url['host']."\r\n\r\n");
$d = '';
while (!feof($fp))
{
$d .= fgets ($fp,2048);
if(preg_match('~(</head>|<body>|(<title>\s*(.*?)\s*</title>))~i', $d, $m))
break;
}
fclose ($fp);
return $m[3];
}
}
?>
[#50] alex at renesource dot lv [2004-03-16 11:07:01]
Set up SSL connection to server that requires client certificate:
Convert client certificate from *.pfx (pkcs12) into*.pem with openssl (if needed):
> openssl pkcs12 -in keys.pfx -out keys.pem
PHP:
<?php
$context = stream_context_create();
$result = stream_context_set_option($context, 'ssl', 'local_cert', '/path/to/keys.pem');
$result = stream_context_set_option($context, 'ssl', 'passphrase', 'pass_to_access_keys');
$socket = fsockopen('ssl://'.$host, 443, $errno, $errstr, 30, $context);
?>
[#51] jack at jtr dot de [2004-02-16 14:05:45]
Here is a function for testing a website/URI for availability:
<?php
function url_validate( $link )
{
$url_parts = @parse_url( $link );
if ( empty( $url_parts["host"] ) ) return( false );
if ( !empty( $url_parts["path"] ) )
{
$documentpath = $url_parts["path"];
}
else
{
$documentpath = "/";
}
if ( !empty( $url_parts["query"] ) )
{
$documentpath .= "?" . $url_parts["query"];
}
$host = $url_parts["host"];
$port = $url_parts["port"];
// Now (HTTP-)GET $documentpath at $host";
if (empty( $port ) ) $port = "80";
$socket = @fsockopen( $host, $port, $errno, $errstr, 30 );
if (!$socket)
{
return(false);
}
else
{
fwrite ($socket, "HEAD ".$documentpath." HTTP/1.0\r\nHost: $host\r\n\r\n");
$http_response = fgets( $socket, 22 );
if ( ereg("200 OK", $http_response, $regs ) )
{
return(true);
fclose( $socket );
} else
{
// echo "HTTP-Response: $http_response<br>";
return(false);
}
}
}
?>
[#52] sir_reality2001 at yahoo dot com [2004-02-13 09:45:00]
<?php
// This script is an example of posting multiple files using
// fsockopen.
// The tricky part is making sure the HTTP headers and file boundaries are acceptable to the target webserver.
// This script is for example purposes only and could/should be improved upon.
$host='targethost';
$port=80;
$path='/test/socket/file_upload/receive_files.php';
// the file you want to upload
$file_array[0] = "dingoboy.gif"; // the file
$file_array[1] = "dingoboy2.gif"; // the file
$file_array[2] = "dingoboy3.gif"; // the file
$content_type = "image/gif"; // the file mime type
//$content_type = "text/plain";
//echo "file_array[0]:$file_array[0]<br><br>";
srand((double)microtime()*1000000);
$boundary = "---------------------------".substr(md5(rand(0,32000)),0,10);
$data = "--$boundary";
for($i=0;$i<count($file_array);$i++){
$content_file = join("", file($file_array[$i]));
$data.="
Content-Disposition: form-data; name=\"file".($i+1)."\"; filename=\"$file_array[$i]\"
Content-Type: $content_type
$content_file
--$boundary";
}
$data.="--\r\n\r\n";
$msg =
"POST $path HTTP/1.0
Content-Type: multipart/form-data; boundary=$boundary
Content-Length: ".strlen($data)."\r\n\r\n";
$result="";
// open the connection
$f = fsockopen($host, $port);
fputs($f,$msg.$data);
// get the response
while (!feof($f)) $result .= fread($f,32000);
fclose($f);
?>
[#53] rob at robhulme dot com [2004-01-23 09:17:39]
Just a note to everyone who is using fsockopen and fread / fgets for a HTTP connection.
Unless you specify "Connection: Close" in your headers you will need to wait for the socket to time out before feof($streamPointer) to return true.
This has wasted 2 days of my time, grr!
-Rob
[#54] asalamanca at redcetus dot com [2003-11-18 11:27:50]
This is a very fast program for test a form or link (many times).
<?php
$repeat = 100; // How many times repeat the test
$timeout = 100; // Max time for stablish the conection
$size = 16; // Bytes will be read (and display). 0 for read all
$server = '127.0.0.1'; // IP address
$host = 'www.example.net'; // Domain name
$target = '/poll/answer.asp'; // Specific program
$referer = 'http://www.example.com/'; // Referer
$port = 80;
// Setup an array of fields to get with then create the get string
$gets = array ( 'get_field_1' => 'somevalue',
'get_field_2' => 'somevalue' );
// Setup an array of fields to post with then create the post string
$posts = array ( 'post_field_1' => 'somevalue',
'post_field_2' => 'somevalue' );
// That's all. Now the program proccess $repeat times
$method = "GET";
if ( is_array( $gets ) ) {
$getValues = '?';
foreach( $gets AS $name => $value ){
$getValues .= urlencode( $name ) . "=" . urlencode( $value ) . '&';
}
$getValues = substr( $getValues, 0, -1 );
} else {
$getValues = '';
}
if ( is_array( $posts ) ) {
foreach( $posts AS $name => $value ){
$postValues .= urlencode( $name ) . "=" . urlencode( $value ) . '&';
}
$postValues = substr( $postValues, 0, -1 );
$method = "POST";
} else {
$postValues = '';
}
$request = "$method $target$getValues HTTP/1.1\r\n";
$request .= "Host: $host\r\n";
$request .= 'User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.2.1) ';
$request .= "Gecko/20021204\r\n";
$request .= 'Accept: text/xml,application/xml,application/xhtml+xml,';
$request .= 'text/html;q=0.9,text/plain;q=0.8,video/x-mng,image/png,';
$request .= "image/jpeg,image/gif;q=0.2,text/css,*
$SB = chr(250);
$SE = chr(240);
$TELOPT_TTYPE = chr(24);
$TELQUAL_IS = chr(0);
//sending Terminal Type
fwrite($sock,$IAC.$SB.$TELOPT_TTYPE.$TELQUAL_IS.'vt100'.$IAC.$SE);
?>
ciao
Sergio Paternoster
[#59] brage (a t) jeffnappi (d.o.t) commie [2003-07-10 02:16:02]
thought you guys may appreciate this function, allows you to pass an array of urls to download and does so simultaneously using non-blocking sockets, then returns the data in an array.
<?php
// function connects to an array of URLS at the same time
// and returns an array of results.
function multiHTTP ($urlArr) {
$sockets = Array(); // socket array!
$urlInfo = Array(); // info arr
$retDone = Array();
$retData = Array();
$errno = Array();
$errstr = Array();
for ($x=0;$x<count($urlArr);$x++) {
$urlInfo[$x] = parse_url($urlArr[$x]);
$urlInfo[$x][port] = ($urlInfo[$x][port]) ? $urlInfo[$x][port] : 80;
$urlInfo[$x][path] = ($urlInfo[$x][path]) ? $urlInfo[$x][path] : "/";
$sockets[$x] = fsockopen($urlInfo[$x][host], $urlInfo[$x][port],
$errno[$x], $errstr[$x], 30);
socket_set_blocking($sockets[$x],FALSE);
$query = ($urlInfo[$x][query]) ? "?" . $urlInfo[$x][query] : "";
fputs($sockets[$x],"GET " . $urlInfo[$x][path] . "$query HTTP/1.0\r\nHost: " .
$urlInfo[$x][host] . "\r\n\r\n");
}
// ok read the data from each one
$done = false;
while (!$done) {
for ($x=0; $x < count($urlArr);$x++) {
if (!feof($sockets[$x])) {
if ($retData[$x]) {
$retData[$x] .= fgets($sockets[$x],128);
} else {
$retData[$x] = fgets($sockets[$x],128);
}
} else {
$retDone[$x] = 1;
}
}
$done = (array_sum($retDone) == count($urlArr));
}
return $retData;
}
?>
[#60] xbensemhoun at t-systems dot fr [2003-06-25 02:48:00]
To make a telnet connection with a Cisco router:
<?php
$cfgServer = "nnn.nnn.nnn.nnn"; //IP of your router
$cfgPort = 23; //port, 22 if SSH
$cfgTimeOut = 10;
$usenet = fsockopen($cfgServer, $cfgPort, $errno, $errstr, $cfgTimeOut);
if(!$usenet)
{
echo "Connexion failed\n";
exit();
}
else
{
echo "Connected\n<BR>";
fputs ($usenet, "toto\r\n");
fputs ($usenet, "en\r\n");
fputs ($usenet, "tutu\r\n");
fputs ($usenet, "exit\r\n");
while (!feof($usenet))
{
echo ". ".fgets($usenet, 128)."<BR>\n";
}
}
?>
Then you will have:
Connected
. ????????
.
. User Access Verification
.
. Password:
. testXB>en
. Password:
. testXB#exit
.
[#61] blazely at removetoemail netspace net au [2003-06-08 09:55:23]
Here's a quick function to establish a connection to a web server that will time out if the connection is lost after a user definable amount of time or if the server can't be reached.
Also supports Basic authentication if a username/password is specified. Any improvements or criticisms, please email me! :-)
Returns either a resource ID, an error code or 0 if the server can't be reached at all. Returns -1 in the event that something really wierd happens like a non-standard http response or something. Hope it helps someone.
Cheers,
Ben Blazely
<?php
function connectToURL($addr, $port, $path, $user="", $pass="", $timeout="30")
{
$urlHandle = fsockopen($addr, $port, $errno, $errstr, $timeout);
if ($urlHandle)
{
socket_set_timeout($urlHandle, $timeout);
if ($path)
{
$urlString = "GET $path HTTP/1.0\r\nHost: $addr\r\nConnection: Keep-Alive\r\nUser-Agent: MyURLGrabber\r\n";
if ($user)
$urlString .= "Authorization: Basic ".base64_encode("$user:$pass")."\r\n";
$urlString .= "\r\n";
fputs($urlHandle, $urlString);
$response = fgets($urlHandle);
if (substr_count($response, "200 OK") > 0) // Check the status of the link
{
$endHeader = false; // Strip initial header information
while ( !$endHeader)
{
if (fgets($urlHandle) == "\r\n")
$endHeader = true;
}
return $urlHandle; // All OK, return the file handle
}
else if (strlen($response) < 15) // Cope with wierd non standard responses
{
fclose($urlHandle);
return -1;
}
else // Cope with a standard error response
{
fclose($urlHandle);
return substr($response,9,3);
}
}
return $urlHandle;
}
else
{
return 0;
}
}
}
?>
[#62] Sherif Gayed [2003-01-29 22:00:08]
Here is how to connect to the web from behind a proxy server:
<?php
$proxy = "192.168.10.1";
$port = 8080;
$url = "http://www.php.net/";
$fp = fsockopen($proxy, $port);
fputs($fp, "GET $url HTTP/1.0\r\nHost: $proxy\r\n\r\n");
while(!feof($fp)){
$line = fgets($fp, 4000);
print($line);
}
fclose($fp);
?>
[#63] g dot bashi at ntlworld dot com [2003-01-03 09:55:33]
The timeout parameter was not supported under windows until PHP 4.3.0, previously it was fixed at 30sec.
[#64] dan at lovepond dot com [2002-12-17 13:38:53]
Here is some code to help out abit more with the EOF problem.
I had a problem where I needed to strip out so many lines of server input to get back right data i wanted.
<?php
$port=4000;
$host="localhost";
$message="test";
$status=senddata($host,$port,$message);
print "$status";
function senddata($host,$port,$message) {
#takes in account servers that do not return EOF character
#send data to server and get back input
#function globals
$linenumber="2"; #amount of lines to get rid of before we give input
$lineamount="1"; #amount of lines to read after we give input
$fp = fsockopen("$host", $port, $errno, $errstr, 30);
if (!$fp) {
echo "$errstr ($errno)";
}
else {
for ($i = 1; $i < $linenumber+1; $i++) {
fread ($fp,1);
$bytes_left = socket_get_status($fp);
if ($bytes_left > 0) { fread($fp, $bytes_left[unread_bytes]); }
}
fputs($fp, "$message\r\n");
for ($i = 1; $i < $lineamount+1; $i++) {
$status.=fread($fp,1);
$bytes_left = socket_get_status($fp);
if ($bytes_left > 0) { $status.=fread($fp, $bytes_left[unread_bytes]); }
}
fclose ($fp);
}
return $status;
}
?>
[#65] verran at descent-rangers dot com [2002-10-16 19:28:44]
I was tearing my hair out for a week trying to figure out how to do this.
If you use fsockopen with a service that doesn't have an EOF, or you try to read beyond EOF or line break, PHP can hang completely.
In my case, I was trying to write a class that talks to Kali servers (www.kali.net) to get a list of people on the chat server. To keep PHP from hanging due to the above, I discovered this:
<?php
class kali_utils {
function games_list($kali_server_ip, $kali_server_port) {
$result = array();
$fp = fsockopen($kali_server_ip, $kali_server_port, $errno, $error, 30);
if (!$fp) {
$result["errno"] = $errno;
$result["error"] = $error;
}
else {
fputs($fp, "KALIQ");
$header = fread($fp, 5);
$bytes_left = socket_get_status($fp);
if ($bytes_left > 0) {
$result["results"] = fread($fp, $bytes_left["unread_bytes"]);
}
else {
$result["results"] = "";
}
fclose($fp);
}
return $result;
}
}
?>
When I send the request packet, I get a response packet of length 5. Then I call socket_get_status() and use the unread_bytes key from it to know how far to fread from the socket. Works very good.
I've only used this on PHP 4.2.1 so far.
[#66] iain at monitormedia dot co dot uk [2002-07-19 05:48:21]
Here's how to send an email using SMTP. This includes rudimentary checking on server responses during the process of sending an email. Could be improved by more comprehensive processing of the result codes...or going on to the next mail exchanger when you fail after connecting to the first.
<?php
function another_mail($to,$subject,$headers,$message)
{
// Could get this from the php ini?
$from="me@example.com";
list($me,$mydomain) = split("@",$from);
// Now look up the mail exchangers for the recipient
list($user,$domain) = split("@",$to,2);
if(getmxrr($domain,$mx,$weight) == 0) return FALSE;
// Try them in order of lowest weight first
array_multisort($mx,$weight);
$success=0;
foreach($mx as $host) {
// Open an SMTP connection
$connection = fsockopen ($host, 25, $errno, $errstr, 1);
if (!$connection)
continue;
$res=fgets($connection,256);
if(substr($res,0,3) != "220") break;
// Introduce ourselves
fputs($connection, "HELO $mydomain\n");
$res=fgets($connection,256);
if(substr($res,0,3) != "250") break;
// Envelope from
fputs($connection, "MAIL FROM: $from\n");
$res=fgets($connection,256);
if(substr($res,0,3) != "250") break;
// Envelope to
fputs($connection, "RCPT TO: $to\n");
$res=fgets($connection,256);
if(substr($res,0,3) != "250") break;
// The message
fputs($connection, "DATA\n");
$res=fgets($connection,256);
if(substr($res,0,3) != "354") break;
// Send To:, From:, Subject:, other headers, blank line, message, and finish
// with a period on its own line.
fputs($connection, "To: $to\nFrom: $from\nSubject: $subject\n$headers\n\n$message\n.\n");
$res=fgets($connection,256);
if(substr($res,0,3) != "250") break;
// Say bye bye
fputs($connection,"QUIT\n");
$res=fgets($connection,256);
if(substr($res,0,3) != "221") break;
// It worked! So break out of the loop which tries all the mail exchangers.
$success=1;
break;
}
// Debug for if we fall over - uncomment as desired
// print $success?"Mail sent":"Failure: $res\n";
if($connection) {
if($success==0) fputs($connection, "QUIT\n");
fclose ($connection);
}
return $success?TRUE:FALSE;
}
another_mail("recipient@example.com","My Subject","X-mailer: PHP Script\nX-another-header: Whatever","Test email body.\n\nNote if you actually put a period on a line\nby itself, the function will terminate prematurely.\n\nYou will get a partial email sent though.\n");
?>