©
本文档使用 PHP中文网手册 发布
(PHP 5 >= 5.1.0)
inet_pton — Converts a human readable IP address to its packed in_addr representation
$address
)This function converts a human readable IPv4 or IPv6 address (if PHP was built with IPv6 support enabled) into an address family appropriate 32bit or 128bit binary structure.
address
A human readable IPv4 or IPv6 address.
Returns the in_addr representation of the given
address
, or FALSE
if a syntactically invalid
address
is given (for example, an IPv4 address
without dots or an IPv6 address without colons).
Example #1 inet_pton() Example
<?php
$in_addr = inet_pton ( '127.0.0.1' );
$in6_addr = inet_pton ( '::1' );
?>
版本 | 说明 |
---|---|
5.3.0 | This function is now available on Windows platforms. |
[#1] dave at php dot net [2015-03-06 04:07:16]
If you are receiving an "Unrecognized address" error for an IPv6 address, it's possible your version of PHP has not been compiled with IPv6 support.
To check, load up phpinfo(); and look to see if "IPv6 Support" is set to "disabled".
[#2] TuRn3r [2014-06-02 15:26:27]
Be careful, address with leading 0 return false.
Example :
<?php
inet_pton('172.27.1.04'); // return false
inet_pton('172.27.1.4') ;// return the good result
?>
[#3] francis dot besset at gmail dot com [2011-07-15 01:45:54]
It is possible to verify if PHP was compiled with --disable-ipv6 option by AF_INET6 constant.
<?php
if (defined('AF_INET6')) {
echo "PHP was compiled without --disable-ipv6 option";
} else {
echo "PHP was compiled with --disable-ipv6 option";
}
?>
[#4] strata_ranger at hotmail dot com [2009-09-13 10:51:37]
If the input string is not a readable IP address, inet_pton() generates an E_WARNING and returns FALSE. The same is true for inet_ntop().
Also, inet_pton() does not recognize netmask notation (e.g: "1.2.3.4/24" or "1:2::3:4/64") in the input string. This differs from how some database systems (like postgreSQL) support IP address types, so if you need that sort of functionality when processing IP addresses in PHP you'll have to write it in yourself.
A rough example:
<?php
// Sample IP addresses
$ipaddr = '1.2.3.4/24'; // IPv4 with /24 netmask
$ipaddr = '1:2::3:4/64'; // IPv6 with /64 netmask
// Strip out the netmask, if there is one.
$cx = strpos($ipaddr, '/');
if ($cx)
{
$subnet = (int)(substr($ipaddr, $cx+1));
$ipaddr = substr($ipaddr, 0, $cx);
}
else $subnet = null; // No netmask present
// Convert address to packed format
$addr = inet_pton($ipaddr);
// Let's display it as hexadecimal format
foreach(str_split($addr) as $char) echo str_pad(dechex(ord($char)), 2, '0', STR_PAD_LEFT);
echo "<br />\n";
// Convert the netmask
if (is_integer($subnet))
{
// Maximum netmask length = same as packed address
$len = 8*strlen($addr);
if ($subnet > $len) $subnet = $len;
// Create a hex expression of the subnet mask
$mask = str_repeat('f', $subnet>>2);
switch($subnet & 3)
{
case 3: $mask .= 'e'; break;
case 2: $mask .= 'c'; break;
case 1: $mask .= '8'; break;
}
$mask = str_pad($mask, $len>>2, '0');
// Packed representation of netmask
$mask = pack('H*', $mask);
}
// Display the netmask as hexadecimal
foreach(str_split($mask) as $char) echo str_pad(dechex(ord($char)), 2, '0', STR_PAD_LEFT);
?>
[#5] eric at vyncke org [2007-07-18 10:52:15]
Not so easy in the function below... It is not handling the case of '::' which can happen in an IPv6 and represents any number of 0, addresses could be as simple as ff05::1
[#6] me at diogoresende dot net [2006-05-16 14:34:28]
If you want to use the above function you should test for ':' character before '.'. Meaning, you should check if it's an ipv6 address before checking for ipv4.
Why? IPv6 allows this type of notation:
::127.0.0.1
If you check for '.' character you will think this is an ipv4 address and it will fail.