©
本文档使用 PHP中文网手册 发布
utf8_decode
(PHP 4, PHP 5)
utf8_decode — 将用 UTF-8 方式编码的 ISO-8859-1 字符串转换成单字节的 ISO-8859-1 字符串。
描述
$data
)该函数将用 UTF-8 编码的数据解码为 ISO-8859-1 编码。
请参阅 utf8_encode() 以查看关于 UTF-8 编码的解释。
用户评论:
[#1] solomon_closson at yahoo dot com [2015-10-22 07:11:58]
Getting rid of all unicode characters in a string seems fairly simple to me using the following:
$str = str_replace('?', '', utf8_decode($str));
Not sure why the long, dragged-out functions for this are needed. The above seems to work just fine.
[#2] okx dot oliver dot koenig at gmail dot com [2015-02-08 11:48:37]
// This finally helped me to do the job, thanks to Blackbit, had to modify deprecated ereg:
// original comment: "Squirrelmail contains a nice function in the sources to convert unicode to entities:"
function charset_decode_utf_8 ($string) {
if (!preg_match("/[\200-\237]/", $string)
&& !preg_match("/[\241-\377]/", $string)
) {
return $string;
}
// decode three byte unicode characters
$string = preg_replace("/([\340-\357])([\200-\277])([\200-\277])/e",
"'&#'.((ord('\\1')-224)*4096 + (ord('\\2')-128)*64 + (ord('\\3')-128)).';'",
$string
);
// decode two byte unicode characters
$string = preg_replace("/([\300-\337])([\200-\277])/e",
"'&#'.((ord('\\1')-192)*64+(ord('\\2')-128)).';'",
$string
);
return $string;
}
[#3] sashott at gmail dot com [2014-12-04 11:57:36]
Use of utf8_decode was not enough for me by get page content from another site. Problem appear by different alphabet from standard latin. As example some chars (corresponding to HTML codes „ , and others) are converted to "?" or "xA0" (hex value). You need to make some conversion before execute utf8_decode. And you can not replace simple, that they can be part of 2 bytes code for a char (UTF-8 use 2 bytes). Next is for cyrillic alphabet, but for other must be very close.
function convertMethod($text){
//Problem is that utf8_decode convert HTML chars for „ and other to ? or to \xA0. And you can not replace, that they are in some char bytes and you broke cyrillic (or other alphabet) chars.
$problem_enc=array(
'euro',
'sbquo',
'bdquo',
'hellip',
'dagger',
'Dagger',
'permil',
'lsaquo',
'lsquo',
'rsquo',
'ldquo',
'rdquo',
'bull',
'ndash',
'mdash',
'trade',
'rsquo',
'brvbar',
'copy',
'laquo',
'reg',
'plusmn',
'micro',
'para',
'middot',
'raquo',
'nbsp'
);
$text=mb_convert_encoding($text,'HTML-ENTITIES','UTF-8');
$text=preg_replace('#(?<!\Ð)\&('.implode('|',$problem_enc).');#s','--amp{$1}',$text);
$text=mb_convert_encoding($text,'UTF-8','HTML-ENTITIES');
$text=utf8_decode($text);
$text=mb_convert_encoding($text,'HTML-ENTITIES','UTF-8');
$text=preg_replace('#\-\-amp\{([^\}]+)\}#su','&$1;',$text);
$text=mb_convert_encoding($text,'UTF-8','HTML-ENTITIES');
return $text;
}
If this don't work, try to set "die($text);" on some places to look, what is happen to this row. Is better to test with long text. It is very possible to broke other alphabet character. In this case, it is very possible, that for you alphabet set "Ð" is not the right one. You need to set "die($text);" after this preg_replace and look HTML code for character before set "--amp".
[#4] Nitrogen [2013-04-01 00:37:22]
Hi all. I have written this comprehensive UTF-8 decoder as I needed a way to split any UTF-8 string
into nice and useable pieces of information, such as an array of code points that make up the input
string regardless if it's UTF-8 or not.
Here's what's good about this function:
1) It splits a UTF-8 encoded string into an array of code points.
2) It supports from 1 byte (7 bit) to 6 byte (31 bit) UTF-8 characters.
3) It checks the validity of the UTF-8 input string and provides an array of erroneous UTF-8 offsets.
4) Provides you with the character length of the UTF-8 string.
<?php
function get_utf_8($input, $include_raw = FALSE) {
$result = array(
'length'=>0,
'errorbytes'=>array(),
'codepoints'=>array()
);
$codepoints = array();
$len = strlen($input);
for($i=0;$i<$len;$i++) {
$c = ord($input{$i});
$msb = ($c>>7)&1;
$bytes = 1;
if(!$msb)
$codepoints[]= $include_raw?array($c, chr($c)):$c;
else {
for($j=0;$j<8&&(($c>>(7-$j))&1);$j++); // how many bytes represent this Unicode character? $j
if(($j>=2 && $j<=6) && $len>$i+$j-1) { // valid range? is there $j-1 extra bytes?
$code = $c&pow(2, 7-$j)-1;
for($k=1;$k<$j;$k++) {
if(((ord($input{$i+$k})>>6)&3)==2)
$code = ($code<<6)|(ord($input{$i+$k})&63);
else {
$result['errorbytes'][]= $i;
continue 2;
}
}
$codepoints[]= $include_raw?array($code, substr($input, $i, $j)):$code;
$i+=$j-1;
}
else
$result['errorbytes'][]= $i;
}
$result['length']++;
}
$result['codepoints'] = $codepoints;
return($result);
}
?>
Some examples of the result:
<?php
$r = get_utf_8('????');
// Using the $include_raw parameter includes the raw UTF-8 bytes...
$r = get_utf_8('????', TRUE);
?>
[#5] christoffer [2012-10-29 10:35:27]
The preferred way to use this on an array would be with the built in PHP function "array_map()", as for example:
$array = array_map("utf8_decode", $array);
[#6] Michael Pfister [2012-09-12 13:10:07]
I personally prefer this method for decoding an array:
<?php
private function utf8DecodeArray(&$item, $key) {
$item = utf8_decode($item);
}
?>
Then just call it like this within the same class:
array_walk_recursive($YOURARRAY, array(&$this, 'utf8DecodeArray'));
This will replace your array with the utf8 decoded one.
[#7] chris at deliens dot be [2012-04-18 12:37:13]
I didn't see any post showing a way to recursively utf8_decode an array.
So here's one I've just built for this purpose:
function utf8DecodeArray($array) {
$utf8DecodedArray = array();
foreach ($array as $key => $value) {
if (is_array($value)) {
$utf8DecodedArray[$key] = utf8DecodeArray($value);
continue;
}
$utf8DecodedArray[$key] = utf8_decode($value);
}
return $utf8DecodedArray;
}
[#8] deceze at gmail dot com [2011-07-14 19:01:11]
Please note that utf8_decode simply converts a string encoded in UTF-8 to ISO-8859-1. A more appropriate name for it would be utf8_to_iso88591. If your text is already encoded in ISO-8859-1, you do not need this function. If you don't want to use ISO-8859-1, you do not need this function.
Note that UTF-8 can represent many more characters than ISO-8859-1. Trying to convert a UTF-8 string that contains characters that can't be represented in ISO-8859-1 to ISO-8859-1 will garble your text and/or cause characters to go missing. Trying to convert text that is not encoded in UTF-8 using this function will most likely garble the text.
If you need to convert any text from any encoding to any other encoding, look at iconv() instead.
[#9] gabriel arobase gabsoftware dot com [2011-06-12 08:41:43]
If you want to retrieve some UTF-8 data from your database, you don't need utf8_decode().
Simply do the following query before any SELECT :
$result = mysql_query("SET NAMES utf8");
[#10] mkluczka at gmail dot com [2010-09-16 04:36:09]
In jQuery AJAX requests, latin2 specific chars have 2B length, and common chars have 1B length.
PHP functions for UTF8->latin2 conversion didn't work for me, so I wrote this simple function
to convert from jQuery AJAX encoding to ISO-8859-2 (latin2).
<?php
function jquery2iso($in)
{
$CONV = array();
$CONV['c4']['85'] = '?';
$CONV['c4']['84'] = '?';
$CONV['c4']['87'] = '?';
$CONV['c4']['86'] = '?';
$CONV['c4']['99'] = '?';
$CONV['c4']['98'] = '?';
$CONV['c5']['82'] = '?';
$CONV['c5']['81'] = '?';
$CONV['c4']['84'] = '??';
$CONV['c4']['83'] = '?';
$CONV['c3']['b3'] = '??';
$CONV['c3']['93'] = '?';
$CONV['c5']['9b'] = '?';
$CONV['c5']['9a'] = '?';
$CONV['c5']['ba'] = '?';
$CONV['c5']['b9'] = '?';
$CONV['c5']['bc'] = '?';
$CONV['c5']['bb'] = '?';
$i=0;
$out = '';
while($i<strlen($in))
{
if(array_key_exists(bin2hex($in[$i]), $CONV))
{
$out .= $CONV[bin2hex($in[$i])][bin2hex($in[$i+1])];
$i += 2;
}
else
{
$out .= $in[$i];
$i += 1;
}
}
return $out;
}
?>
[#11] andrew [2009-11-25 08:13:58]
a simple function to convert encoding that appears mixed.
<?php
$trans = new Latin1UTF8();
$mixed = "MIXED TEXT INPUT";
print "Original: ".$mixed;
print "Latin1: ".$trans->mixed_to_latin1($mixed);
print "UTF-8: ".$trans->mixed_to_utf8($mixed);
class Latin1UTF8 {
private $latin1_to_utf8;
private $utf8_to_latin1;
public function __construct() {
for($i=32; $i<=255; $i++) {
$this->latin1_to_utf8[chr($i)] = utf8_encode(chr($i));
$this->utf8_to_latin1[utf8_encode(chr($i))] = chr($i);
}
}
public function mixed_to_latin1($text) {
foreach( $this->utf8_to_latin1 as $key => $val ) {
$text = str_replace($key, $val, $text);
}
return $text;
}
public function mixed_to_utf8($text) {
return utf8_encode($this->mixed_to_latin1($text));
}
}
?>
[#12] Anonymous [2009-08-08 14:25:58]
In addition to Blackbit's note below, here's my shot at converting UTF-8 strings to HTML entities.
<?php $encoded = preg_replace('/([\200-\277])/e', "'&#'.(ord('\\1')).';'", $utf8str); ?>
This code converts one byte UTF-8 to HTML entities while below you'll find conversions for two byte and three byte UTF-8.
[#13] pedro at pontonet dot com [2009-05-05 15:25:55]
I've modified above utf8_array_decode to utf8_array_encode. The main difference is the later encodes a multi-dimension array.
Here goes the code:
<?php
function utf8_array_encode($input)
{
$return = array();
foreach ($input as $key => $val)
{
if( is_array($val) )
{
$return[$key] = utf8_array_encode($val);
}
else
{
$return[$key] = utf8_encode($val);
}
}
return $return;
}
?>
Enjoy it!
Pedro Bastos
[#14] ytak at gmx dot net [2009-01-30 09:35:07]
If you running Gentoo Linux and encounter problems with some PHP5 applications saying:
Call to undefined function: utf8_decode()
Try reemerge PHP4 with 'xml' flag enabled.
[#15] info at vanylla dot it [2009-01-26 12:21:45]
IMPORTANT: when converting UTF8 data that contains the EURO sign DON'T USE utf_decode function.
utf_decode converts the data into ISO-8859-1 charset. But ISO-8859-1 charset does not contain the EURO sign, therefor the EURO sign will be converted into a question mark character '?'
In order to convert properly UTF8 data with EURO sign you must use:
iconv("UTF-8", "CP1252", $data)
[#16] Blackbit [2008-08-12 04:40:47]
Squirrelmail contains a nice function in the sources to convert unicode to entities:
<?php
function charset_decode_utf_8 ($string) {
if (! ereg("[\200-\237]", $string) and ! ereg("[\241-\377]", $string))
return $string;
// decode three byte unicode characters
$string = preg_replace("/([\340-\357])([\200-\277])([\200-\277])/e", \
"'&#'.((ord('\\1')-224)*4096 + (ord('\\2')-128)*64 + (ord('\\3')-128)).';'", \
$string);
// decode two byte unicode characters
$string = preg_replace("/([\300-\337])([\200-\277])/e", \
"'&#'.((ord('\\1')-192)*64+(ord('\\2')-128)).';'", \
$string);
return $string;
}
?>
[#17] punchivan at gmail dot com [2008-06-24 14:13:52]
EY! the bug is not in the function 'utf8_decode'. The bug is in the function 'mb_detect_encoding'. If you put a word with a special char at the end like this 'accentu??', that will lead to a wrong result (UTF-8) but if you put another char at the end like this 'accentu??e' you will get it right. So you should always add a ISO-8859-1 character to your string for this check. My advise is to use a blank space.
I?ve tried it and it works!
function ISO_convert($array)
{
$array_temp = array();
foreach($array as $name => $value)
{
if(is_array($value))
$array_temp[(mb_detect_encoding($name." ",'UTF-8,ISO-8859-1') == 'UTF-8' ? utf8_decode($name) : $name )] = ISO_convert($value);
else
$array_temp[(mb_detect_encoding($name." ",'UTF-8,ISO-8859-1') == 'UTF-8' ? utf8_decode($name) : $name )] = (mb_detect_encoding($value." ",'UTF-8,ISO-8859-1') == 'UTF-8' ? utf8_decode($value) : $value );
}
return $array_temp;
}
[#18] webmaster at lapstore dot de [2008-06-19 08:11:23]
[EDITED BY cataphract AT php DOT net - NOTE: This has been fixed
in PHP 5.3.4 and 5.2.15.]
Warning!
This function contains a possible security risk when you try to convert escaped strings (see addslashes() and related functions).
It reacts nasty on broken multibyte sequences. In UTF-8, follow-up bytes ALWAYS have the binary pattern 10xxxxxx, but this fact is not handled by utf8_decode in the way you would expect: If you pass a start byte (110xxxxx, 1110xxxx, 11110xxx - or even invalid sequences like 11111100), followed by one or more non-multibyte chars (0xxxxxxx), the start sequence "char" will be replaced by '?' (0x3F) and up to three following chars will disappear even if they are single-byte-chars (0xxxxxxx). So if you escape a string with a typical escape char like backslash, you would expect that your escaping would always survive a call to utf8decode because the escape char is in the assumed safe ascii range 0-127, but that is NOT the case!
Try things like utf8_decode("test: ??\\\"123456") to check it out.
To avoid problems take care that string-escaping always is the last step of data manipulation when you depend on leak-proof escaping.
[#19] juantxito at example dot com [2008-05-28 01:26:36]
To decode the values and the keys, i think this would work
function utf8_array_decode($input){
$return = array();
foreach ($input as $key => $val) {
$k = utf8_decode($key);
$return[$k] = utf8_decode($val);
}
return $return;
}
[#20] phpnet at freshsite dot de [2008-05-09 01:08:06]
I didn't find an utf8_array_decode. This one only decodes the values, not the keys.
function utf8_array_decode($input){
foreach ($input as $key => $val) {
$input[$key] = utf8_decode($val);
}
return $input;
}
[#21] haugas at gmail dot com [2008-05-08 02:11:34]
If you don't know exactly, how many times your string is encoded, you can use this function:
<?php
function _utf8_decode($string)
{
$tmp = $string;
$count = 0;
while (mb_detect_encoding($tmp)=="UTF-8")
{
$tmp = utf8_decode($tmp);
$count++;
}
for ($i = 0; $i < $count-1 ; $i++)
{
$string = utf8_decode($string);
}
return $string;
}
?>
[#22] lukasz dot mlodzik at gmail dot com [2008-03-05 04:46:58]
Update to MARC13 function utf2iso()
I'm using it to handle AJAX POST calls.
Despite using
http.setRequestHeader('Content-Type', 'application/x-www-form-urlencoded'; charset='utf-8');
it still code Polish letters using UTF-16
This is only for Polish letters:
<?php
function utf16_2_utf8 ($nowytekst) {
$nowytekst = str_replace('%u0104','?',$nowytekst); //?
$nowytekst = str_replace('%u0106','?',$nowytekst); //?
$nowytekst = str_replace('%u0118','?',$nowytekst); //?
$nowytekst = str_replace('%u0141','?',$nowytekst); //?
$nowytekst = str_replace('%u0143','?',$nowytekst); //?
$nowytekst = str_replace('%u00D3','?',$nowytekst); //?
$nowytekst = str_replace('%u015A','?',$nowytekst); //?
$nowytekst = str_replace('%u0179','?',$nowytekst); //?
$nowytekst = str_replace('%u017B','?',$nowytekst); //?
$nowytekst = str_replace('%u0105','?',$nowytekst); //?
$nowytekst = str_replace('%u0107','?',$nowytekst); //?
$nowytekst = str_replace('%u0119','?',$nowytekst); //?
$nowytekst = str_replace('%u0142','?',$nowytekst); //?
$nowytekst = str_replace('%u0144','??',$nowytekst); //??
$nowytekst = str_replace('%u00F3','??',$nowytekst); //??
$nowytekst = str_replace('%u015B','?',$nowytekst); //?
$nowytekst = str_replace('%u017A','?',$nowytekst); //?
$nowytekst = str_replace('%u017C','?',$nowytekst); //?
return ($nowytekst);
}
?>
Everything goes smooth, but it doesn't change '%u00D3','?' and '%u00F3','??'. I dont have idea what to do with that.
Remember! File must be saved in UTF-8 coding.
[#23] tacchete at gmail dot com [2007-12-13 04:36:23]
Known problem with Byte Order Mark (BOM) and header() in pages of a site.
For example at sending headings or to a dynamic conclusion in other coding distinct from UTF-8 by means of XSLT (<xsl:output encoding="windows-1251"/>).
To clean all symbols BOM from the text of page:
1. exclude BOM from the main file;
2. write down function of a return call for the buffer
<?php
header('content-type: text/html; charset: utf-8');
ob_start('ob');
function ob($buffer)
{
return str_replace("\xef\xbb\xbf", '', $buffer);
}
?>
it will exclude BOM from a code of the connected files;
3. do not experience for BOM in connected files;
4. be pleased.
[#24] ludvig dot ericson at gmail dot com [2007-07-15 10:52:22]
A better way to convert would be to use iconv, see http://www.php.net/iconv -- example:
<?php
$myUnicodeString = "???";
echo iconv("UTF-8", "ISO-8859-1", $myUnicodeString);
?>
Above would echo out the given variable in ISO-8859-1 encoding, you may replace it with whatever you prefer.
Another solution to the issue of misdisplayed glyphs is to simply send the document as UTF-8, and of course send UTF-8 data:
<?php
# Replace text/html with whatever MIME-type you prefer.
header("Content-Type: text/html; charset=utf-8");
?>
[#25] MARC13 [2007-07-07 07:50:28]
I did this function to convert data from AJAX call to insert to my database.
It converts UTF-8 from XMLHttpRequest() to ISO-8859-2 that I use in LATIN2 MySQL database.
<?php
function utf2iso($tekst)
{
$nowytekst = str_replace("%u0104","\xA1",$tekst); //?
$nowytekst = str_replace("%u0106","\xC6",$nowytekst); //?
$nowytekst = str_replace("%u0118","\xCA",$nowytekst); //?
$nowytekst = str_replace("%u0141","\xA3",$nowytekst); //?
$nowytekst = str_replace("%u0143","\xD1",$nowytekst); //?
$nowytekst = str_replace("%u00D3","\xD3",$nowytekst); //?
$nowytekst = str_replace("%u015A","\xA6",$nowytekst); //?
$nowytekst = str_replace("%u0179","\xAC",$nowytekst); //?
$nowytekst = str_replace("%u017B","\xAF",$nowytekst); //?
$nowytekst = str_replace("%u0105","\xB1",$nowytekst); //?
$nowytekst = str_replace("%u0107","\xE6",$nowytekst); //?
$nowytekst = str_replace("%u0119","\xEA",$nowytekst); //?
$nowytekst = str_replace("%u0142","\xB3",$nowytekst); //?
$nowytekst = str_replace("%u0144","\xF1",$nowytekst); //??
$nowytekst = str_replace("%u00D4","\xF3",$nowytekst); //??
$nowytekst = str_replace("%u015B","\xB6",$nowytekst); //?
$nowytekst = str_replace("%u017A","\xBC",$nowytekst); //?
$nowytekst = str_replace("%u017C","\xBF",$nowytekst); //?
return ($nowytekst);
}
?>
In my case also the code file that deals with AJAX calls must be in UTF-8 coding.
[#26] visus at portsonline dot net [2007-06-23 09:08:01]
Following code helped me with mixed (UTF8+ISO-8859-1(x)) encodings. In this case, I have template files made and maintained by designers who do not care about encoding and MySQL data in utf8_binary_ci encoded tables.
<?php
class Helper
{
function strSplit($text, $split = 1)
{
if (!is_string($text)) return false;
if (!is_numeric($split) && $split < 1) return false;
$len = strlen($text);
$array = array();
$i = 0;
while ($i < $len)
{
$key = NULL;
for ($j = 0; $j < $split; $j += 1)
{
$key .= $text{$i};
$i += 1;
}
$array[] = $key;
}
return $array;
}
function UTF8ToHTML($str)
{
$search = array();
$search[] = "/([\\xC0-\\xF7]{1,1}[\\x80-\\xBF]+)/e";
$search[] = "/ä/";
$search[] = "/ö/";
$search[] = "/ü/";
$search[] = "/Ä/";
$search[] = "/Ö/";
$search[] = "/Ü/";
$search[] = "/ß/";
$replace = array();
$replace[] = 'Helper::_UTF8ToHTML("\\1")';
$replace[] = "?";
$replace[] = "?";
$replace[] = "??";
$replace[] = "?";
$replace[] = "?";
$replace[] = "??";
$replace[] = "?";
$str = preg_replace($search, $replace, $str);
return $str;
}
function _UTF8ToHTML($str)
{
$ret = 0;
foreach((Helper::strSplit(strrev(chr((ord($str{0}) % 252 % 248 % 240 % 224 % 192) + 128).substr($str, 1)))) as $k => $v)
$ret += (ord($v) % 128) * pow(64, $k);
return "&#".$ret.";";
}
}
// Usage example:
$tpl = file_get_contents("template.tpl");
$row = mysql_fetch_assoc($result);
print(Helper::UTF8ToHTML(str_replace("{VAR}", $row['var'], $tpl)));
?>
[#27] luka8088 at gmail dot com [2007-06-22 07:03:38]
simple UTF-8 to HTML conversion:
function utf8_to_html ($data)
{
return preg_replace("/([\\xC0-\\xF7]{1,1}[\\x80-\\xBF]+)/e", '_utf8_to_html("\\1")', $data);
}
function _utf8_to_html ($data)
{
$ret = 0;
foreach((str_split(strrev(chr((ord($data{0}) % 252 % 248 % 240 % 224 % 192) + 128) . substr($data, 1)))) as $k => $v)
$ret += (ord($v) % 128) * pow(64, $k);
return "&#$ret;";
}
Example:
echo utf8_to_html("a b ? ? ? ?? ?? ?? ?? ()[]{}!#$?*");
Output:
a b č ć ž こ に ち わ ()[]{}!#$?*
[#28] Sadi [2007-06-13 03:38:05]
Once again about polish letters. If you use fananf's solution, make sure that PHP file is coded with cp1250 or else it won't work. It's quite obvious, however I spent some time before I finally figured that out, so I thought I post it here.
[#29] alexlevin at kvadro dot net [2007-05-20 20:20:48]
If you running Gentoo Linux and encounter problems with some PHP4 applications saying:
Call to undefined function: utf8_decode()
Try reemerge PHP4 with 'expat' flag enabled.
[#30] ahmed dot adaileh at gmail dot com [2007-03-08 03:32:17]
I searched a lot everywhere to find a suitable function which converts my UTF8 characters to the windows-1250 charset for Polish language, but couldn't find anything :(
Following is a function which does that:
function show_polish ($text) {
$text = str_replace("??", 'Ą', $text); //?
$text = str_replace("??", 'Ć', $text); //?
$text = str_replace("??", 'Ę', $text); //?
$text = str_replace("??", 'Ł', $text); //?
$text = str_replace("??", 'Ń', $text); //?
$text = str_replace("???", 'Ó', $text); //?
$text = str_replace("??", 'Ś', $text); //?
$text = str_replace("??", 'Ź', $text); //?
$text = str_replace("??", 'Ż', $text); //?
$text = str_replace("???", 'ą', $text); //?
$text = str_replace("??", 'ć', $text); //?
$text = str_replace("??", 'ę', $text); //?
$text = str_replace("??", 'ł', $text); //?
$text = str_replace("??", 'ń', $text); //??
$text = str_replace("??", 'ó', $text); //??
$text = str_replace("??", 'ś', $text); //?
$text = str_replace("??", 'ź', $text); //?
$text = str_replace("??", 'ż', $text); //?
return $text;
}
You can refer to http://hermes.umcs.lublin.pl/~awmarcz/awm/info/pl-codes.htm
if you want to use HTML hex. code rather than HTML dec. code which I used in my function.
[#31] fananf at nerdshack dot com [2007-03-05 07:22:22]
Comment to AJGORS reply from 28-Dec-2006 02:38:
You have used twice "?" instead of "?".
Correct code should be:
ISO version:
function utf82iso88592($text) {
$text = str_replace("\xC4\x85", '??', $text);
$text = str_replace("\xC4\x84", '??', $text);
$text = str_replace("\xC4\x87", '?', $text);
$text = str_replace("\xC4\x86", '?', $text);
$text = str_replace("\xC4\x99", '?', $text);
$text = str_replace("\xC4\x98", '?', $text);
$text = str_replace("\xC5\x82", '?', $text);
$text = str_replace("\xC5\x81", '?', $text);
$text = str_replace("\xC3\xB3", '??', $text);
$text = str_replace("\xC3\x93", '?', $text);
$text = str_replace("\xC5\x9B", '?', $text);
$text = str_replace("\xC5\x9A", '?', $text);
$text = str_replace("\xC5\xBC", '?', $text);
$text = str_replace("\xC5\xBB", '?', $text);
$text = str_replace("\xC5\xBA", '?', $text);
$text = str_replace("\xC5\xB9", '?', $text);
$text = str_replace("\xc5\x84", '??', $text);
$text = str_replace("\xc5\x83", '?', $text);
return $text;
}
CP version:
function utf82iso88592($text) {
$text = str_replace("\xC4\x85", '?', $text);
$text = str_replace("\xC4\x84", '?', $text);
$text = str_replace("\xC4\x87", '?', $text);
$text = str_replace("\xC4\x86", '?', $text);
$text = str_replace("\xC4\x99", '?', $text);
$text = str_replace("\xC4\x98", '?', $text);
$text = str_replace("\xC5\x82", '?', $text);
$text = str_replace("\xC5\x81", '?', $text);
$text = str_replace("\xC3\xB3", '??', $text);
$text = str_replace("\xC3\x93", '?', $text);
$text = str_replace("\xC5\x9B", '?', $text);
$text = str_replace("\xC5\x9A", '?', $text);
$text = str_replace("\xC5\xBC", '?', $text);
$text = str_replace("\xC5\xBB", '?', $text);
$text = str_replace("\xC5\xBA", '?', $text);
$text = str_replace("\xC5\xB9", '?', $text);
$text = str_replace("\xc5\x84", '??', $text);
$text = str_replace("\xc5\x83", '?', $text);
return $text;
}
[#32] sam [2007-02-06 08:20:52]
In addition to yannikh's note, to convert a hex utf8 string
<?php
echo utf8_decode("\x61\xc3\xb6\x61");
// works as expected
$abc="61c3b661";
$newstr = "";
$l = strlen($abc);
for ($i=0;$i<$l;$i+=2){
$newstr .= "\x".$abc[$i].$abc[$i+1];
}
echo utf8_decode($newstr);
// or varieties of "\x": "\\x" etc does NOT output what you want
echo utf8_decode(pack('H*',$abc));
// this outputs the correct string, like the first line.
?>
[#33] Ajgor [2006-12-28 05:38:29]
small upgrade for polish decoding:
function utf82iso88592($text) {
$text = str_replace("\xC4\x85", '?', $text);
$text = str_replace("\xC4\x84", '?', $text);
$text = str_replace("\xC4\x87", '?', $text);
$text = str_replace("\xC4\x86", '?', $text);
$text = str_replace("\xC4\x99", '?', $text);
$text = str_replace("\xC4\x98", '?', $text);
$text = str_replace("\xC5\x82", '?', $text);
$text = str_replace("\xC5\x81", '?', $text);
$text = str_replace("\xC3\xB3", '??', $text);
$text = str_replace("\xC3\x93", '?', $text);
$text = str_replace("\xC5\x9B", '?', $text);
$text = str_replace("\xC5\x9A", '?', $text);
$text = str_replace("\xC5\xBC", '?', $text);
$text = str_replace("\xC5\xBB", '?', $text);
$text = str_replace("\xC5\xBA", '?', $text);
$text = str_replace("\xC5\xB9", '?', $text);
$text = str_replace("\xc5\x84", '??', $text);
$text = str_replace("\xc5\x83", '?', $text);
return $text;
} // utf82iso88592
[#34] paul.hayes at entropedia.co.uk [2006-10-27 07:10:50]
I noticed that the utf-8 to html functions below are only for 2 byte long codes. Well I wanted 3 byte support (sorry haven't done 4, 5 or 6). Also I noticed the concatination of the character codes did have the hex prefix 0x and so failed with the large 2 byte codes)
<?php
public function utf2html (&$str) {
$ret = "";
$max = strlen($str);
$last = 0; // keeps the index of the last regular character
for ($i=0; $i<$max; $i++) {
$c = $str{$i};
$c1 = ord($c);
if ($c1>>5 == 6) { // 110x xxxx, 110 prefix for 2 bytes unicode
$ret .= substr($str, $last, $i-$last); // append all the regular characters we've passed
$c1 &= 31; // remove the 3 bit two bytes prefix
$c2 = ord($str{++$i}); // the next byte
$c2 &= 63; // remove the 2 bit trailing byte prefix
$c2 |= (($c1 & 3) << 6); // last 2 bits of c1 become first 2 of c2
$c1 >>= 2; // c1 shifts 2 to the right
$ret .= "&#" . ($c1 * 0x100 + $c2) . ";"; // this is the fastest string concatenation
$last = $i+1;
}
elseif ($c1>>4 == 14) { // 1110 xxxx, 110 prefix for 3 bytes unicode
$ret .= substr($str, $last, $i-$last); // append all the regular characters we've passed
$c2 = ord($str{++$i}); // the next byte
$c3 = ord($str{++$i}); // the third byte
$c1 &= 15; // remove the 4 bit three bytes prefix
$c2 &= 63; // remove the 2 bit trailing byte prefix
$c3 &= 63; // remove the 2 bit trailing byte prefix
$c3 |= (($c2 & 3) << 6); // last 2 bits of c2 become first 2 of c3
$c2 >>=2; //c2 shifts 2 to the right
$c2 |= (($c1 & 15) << 4); // last 4 bits of c1 become first 4 of c2
$c1 >>= 4; // c1 shifts 4 to the right
$ret .= '&#' . (($c1 * 0x10000) + ($c2 * 0x100) + $c3) . ';'; // this is the fastest string concatenation
$last = $i+1;
}
}
$str=$ret . substr($str, $last, $i); // append the last batch of regular characters
}
?>
[#35] tobias at code-x dot de [2006-10-20 05:13:19]
converting uft8-html sign ĭ to uft8
<?php
function uft8html2utf8( $s ) {
if ( !function_exists('uft8html2utf8_callback') ) {
function uft8html2utf8_callback($t) {
$dec = $t[1];
if ($dec < 128) {
$utf = chr($dec);
} else if ($dec < 2048) {
$utf = chr(192 + (($dec - ($dec % 64)) / 64));
$utf .= chr(128 + ($dec % 64));
} else {
$utf = chr(224 + (($dec - ($dec % 4096)) / 4096));
$utf .= chr(128 + ((($dec % 4096) - ($dec % 64)) / 64));
$utf .= chr(128 + ($dec % 64));
}
return $utf;
}
}
return preg_replace_callback('|&#([0-9]{1,});|', 'uft8html2utf8_callback', $s );
}
echo uft8html2utf8('test: ĭ');
?>
[#36] e dot panzyk at panzyk dot net [2006-10-04 14:38:22]
enhanced UTF8-Decoder
After recognising that UTF8-Decode converts some French Characters to "?" i end with that Function.
The space will be need when a String ends with a converted Char ( a buggy Php Function will fit a /hex00 char at the End )
function utf8dec ( $s_String )
{
$s_String = html_entity_decode(htmlentities($s_String." ", ENT_COMPAT, 'UTF-8'));
return substr($s_String, 0, strlen($s_String)-1);
}
Hope it helps ... cost me a lot of time ...
[#37] ethaizone [AT] hotmail [DOT] com [2006-08-01 22:11:09]
This function I use convert UTF-8 to Thai font (iso-8859-11).
It from iso8859_11toUTF8 function [Suttichai Mesaard-www.ceforce.com] at utf8_encode page.
It useful for translate string from mod_rewrite to real url.
I makes SEO Url In Thai language.
<?php
function UTF8toiso8859_11($string) {
if ( ! ereg("[\241-\377]", $string) )
return $string;
$UTF8 = array(
"\xe0\xb8\x81" => "\xa1",
"\xe0\xb8\x82" => "\xa2",
"\xe0\xb8\x83" => "\xa3",
"\xe0\xb8\x84" => "\xa4",
"\xe0\xb8\x85" => "\xa5",
"\xe0\xb8\x86" => "\xa6",
"\xe0\xb8\x87" => "\xa7",
"\xe0\xb8\x88" => "\xa8",
"\xe0\xb8\x89" => "\xa9",
"\xe0\xb8\x8a" => "\xaa",
"\xe0\xb8\x8b" => "\xab",
"\xe0\xb8\x8c" => "\xac",
"\xe0\xb8\x8d" => "\xad",
"\xe0\xb8\x8e" => "\xae",
"\xe0\xb8\x8f" => "\xaf",
"\xe0\xb8\x90" => "\xb0",
"\xe0\xb8\x91" => "\xb1",
"\xe0\xb8\x92" => "\xb2",
"\xe0\xb8\x93" => "\xb3",
"\xe0\xb8\x94" => "\xb4",
"\xe0\xb8\x95" => "\xb5",
"\xe0\xb8\x96" => "\xb6",
"\xe0\xb8\x97" => "\xb7",
"\xe0\xb8\x98" => "\xb8",
"\xe0\xb8\x99" => "\xb9",
"\xe0\xb8\x9a" => "\xba",
"\xe0\xb8\x9b" => "\xbb",
"\xe0\xb8\x9c" => "\xbc",
"\xe0\xb8\x9d" => "\xbd",
"\xe0\xb8\x9e" => "\xbe",
"\xe0\xb8\x9f" => "\xbf",
"\xe0\xb8\xa0" => "\xc0",
"\xe0\xb8\xa1" => "\xc1",
"\xe0\xb8\xa2" => "\xc2",
"\xe0\xb8\xa3" => "\xc3",
"\xe0\xb8\xa4" => "\xc4",
"\xe0\xb8\xa5" => "\xc5",
"\xe0\xb8\xa6" => "\xc6",
"\xe0\xb8\xa7" => "\xc7",
"\xe0\xb8\xa8" => "\xc8",
"\xe0\xb8\xa9" => "\xc9",
"\xe0\xb8\xaa" => "\xca",
"\xe0\xb8\xab" => "\xcb",
"\xe0\xb8\xac" => "\xcc",
"\xe0\xb8\xad" => "\xcd",
"\xe0\xb8\xae" => "\xce",
"\xe0\xb8\xaf" => "\xcf",
"\xe0\xb8\xb0" => "\xd0",
"\xe0\xb8\xb1" => "\xd1",
"\xe0\xb8\xb2" => "\xd2",
"\xe0\xb8\xb3" => "\xd3",
"\xe0\xb8\xb4" => "\xd4",
"\xe0\xb8\xb5" => "\xd5",
"\xe0\xb8\xb6" => "\xd6",
"\xe0\xb8\xb7" => "\xd7",
"\xe0\xb8\xb8" => "\xd8",
"\xe0\xb8\xb9" => "\xd9",
"\xe0\xb8\xba" => "\xda",
"\xe0\xb8\xbf" => "\xdf",
"\xe0\xb9\x80" => "\xe0",
"\xe0\xb9\x81" => "\xe1",
"\xe0\xb9\x82" => "\xe2",
"\xe0\xb9\x83" => "\xe3",
"\xe0\xb9\x84" => "\xe4",
"\xe0\xb9\x85" => "\xe5",
"\xe0\xb9\x86" => "\xe6",
"\xe0\xb9\x87" => "\xe7",
"\xe0\xb9\x88" => "\xe8",
"\xe0\xb9\x89" => "\xe9",
"\xe0\xb9\x8a" => "\xea",
"\xe0\xb9\x8b" => "\xeb",
"\xe0\xb9\x8c" => "\xec",
"\xe0\xb9\x8d" => "\xed",
"\xe0\xb9\x8e" => "\xee",
"\xe0\xb9\x8f" => "\xef",
"\xe0\xb9\x90" => "\xf0",
"\xe0\xb9\x91" => "\xf1",
"\xe0\xb9\x92" => "\xf2",
"\xe0\xb9\x93" => "\xf3",
"\xe0\xb9\x94" => "\xf4",
"\xe0\xb9\x95" => "\xf5",
"\xe0\xb9\x96" => "\xf6",
"\xe0\xb9\x97" => "\xf7",
"\xe0\xb9\x98" => "\xf8",
"\xe0\xb9\x99" => "\xf9",
"\xe0\xb9\x9a" => "\xfa",
"\xe0\xb9\x9b" => "\xfb",
);
$string=strtr($string,$UTF8);
return $string;
}
?>
Jo, EThaiZone.Com
[#38] 2ge at NO2geSPAM dot us [2006-01-26 01:00:22]
Hello all,
I like to use COOL (nice) URIs, example: http://example.com/try-something
I'm using UTF8 as input, so I have to write a function UTF8toASCII to have nice URI. Here is what I come with:
<?php
function urlize($url) {
$search = array('/[^a-z0-9]/', '/--+/', '/^-+/', '/-+$/' );
$replace = array( '-', '-', '', '');
return preg_replace($search, $replace, utf2ascii($url));
}
function utf2ascii($string) {
$iso88591 = "\\xE0\\xE1\\xE2\\xE3\\xE4\\xE5\\xE6\\xE7";
$iso88591 .= "\\xE8\\xE9\\xEA\\xEB\\xEC\\xED\\xEE\\xEF";
$iso88591 .= "\\xF0\\xF1\\xF2\\xF3\\xF4\\xF5\\xF6\\xF7";
$iso88591 .= "\\xF8\\xF9\\xFA\\xFB\\xFC\\xFD\\xFE\\xFF";
$ascii = "aaaaaaaceeeeiiiidnooooooouuuuyyy";
return strtr(mb_strtolower(utf8_decode($string), 'ISO-8859-1'),$iso88591,$ascii);
}
echo urlize("Fucking ?m?l");
?>
I hope this helps someone.
[#39] php-net at ---NOSPAM---lc dot yi dot org [2005-12-08 00:04:38]
I've just created this code snippet to improve the user-customizable emails sent by one of my websites.
The goal was to use UTF-8 (Unicode) so that non-english users have all the Unicode benefits, BUT also make life seamless for English (or specifically, English MS-Outlook users). The niggle: Outlook prior to 2003 (?) does not properly detect unicode emails. When "smart quotes" from MS Word were pasted into a rich text area and saved in Unicode, then sent by email to an Outlook user, more often than not, these characters were wrongly rendered as "greek".
So, the following code snippet replaces a few strategic characters into html entities which Outlook XP (and possibly earlier) will render as expected. [Code based on bits of code from previous posts on this and the htmlenties page]
<?php
$badwordchars=array(
"\xe2\x80\x98", // left single quote
"\xe2\x80\x99", // right single quote
"\xe2\x80\x9c", // left double quote
"\xe2\x80\x9d", // right double quote
"\xe2\x80\x94", // em dash
"\xe2\x80\xa6" // elipses
);
$fixedwordchars=array(
"‘",
"’",
'“',
'”',
'—',
'…'
);
$html=str_replace($badwordchars,$fixedwordchars,$html);
?>
[#40] yannikh at gmeil dot com [2005-12-07 23:34:01]
I had to tackle a very interesting problem:
I wanted to replace all \xXX in a text by it's letters. Unfortunatelly XX were ASCII and not utf8. I solved my problem that way:
<?php preg_replace ('/\\\\x([0-9a-fA-F]{2})/e', "pack('H*',utf8_decode('\\1'))",$v); ?>
[#41] thierry.bo # netcourrier point com [2005-09-30 12:38:10]
In response to fhoech (22-Sep-2005 11:55), I just tried a simultaneous test with the file UTF-8-test.txt using your regexp, 'j dot dittmer' (20-Sep-2005 06:30) regexp (message #56962), `php-note-2005` (17-Feb-2005 08:57) regexp in his message on `mb-detect-encoding` page (http://us3.php.net/manual/en/function.mb-detect-encoding.php#50087) who is using a regexp from the W3C (http://w3.org/International/questions/qa-forms-utf-8.html), and PHP mb_detect_encoding function.
Here are a summarize of the results :
201 lines are valid UTF8 strings using phpnote regexp
203 lines are valid UTF8 strings using j.dittmer regexp
200 lines are valid UTF8 strings using fhoech regexp
239 lines are valid UTF8 strings using using mb_detect_encoding
Here are the lines with differences (left to right, phpnote, j.dittmer and fhoech) :
Line #70 : NOT UTF8|IS UTF8!|IS UTF8! :2.1.1 1 byte (U-00000000): ""
Line #79 : NOT UTF8|IS UTF8!|IS UTF8! :2.2.1 1 byte (U-0000007F): ""
Line #81 : IS UTF8!|IS UTF8!|NOT UTF8 :2.2.3 3 bytes (U-0000FFFF): "" |
Line #267 : IS UTF8!|IS UTF8!|NOT UTF8 :5.3.1 U+FFFE = ef bf be = "" |
Line #268 : IS UTF8!|IS UTF8!|NOT UTF8 :5.3.2 U+FFFF = ef bf bf = "" |
Interesting is that you said that your regexp corrected j.dittmer regexp that failed on 5.3 section, but it my test I have the opposite result ?!
I ran this test on windows XP with PHP 4.3.11dev. Maybe these differences come from operating system, or PHP version.
For mb_detect_encoding I used the command :
mb_detect_encoding($line, 'UTF-8, ISO-8859-1, ASCII');
[#42] fhoech [2005-09-22 10:55:29]
Sorry, I had a typo in my last comment. Corrected regexp:
^([\\x00-\\x7f]|
[\\xc2-\\xdf][\\x80-\\xbf]|
\\xe0[\\xa0-\\xbf][\\x80-\\xbf]|
[\\xe1-\\xec][\\x80-\\xbf]{2}|
\\xed[\\x80-\\x9f][\\x80-\\xbf]|
\\xef[\\x80-\\xbf][\\x80-\\xbd]|
\\xee[\\x80-\\xbf]{2}|
\xf0[\\x90-\\xbf][\\x80-\\xbf]{2}|
[\\xf1-\\xf3][\\x80-\\xbf]{3}|
\\xf4[\\x80-\\x8f][\\x80-\\xbf]{2})*$
[#43] fhoech [2005-09-22 10:12:45]
JF Sebastian's regex is almost perfect as far as I'm concerned. I found one error (it failed section 5.3 "Other illegal code positions" from http://www.cl.cam.ac.uk/~mgk25/ucs/examples/UTF-8-test.txt) which I corrected as follows:
^([\\x00-\\x7f]|
[\\xc2-\\xdf][\\x80-\\xbf]|
\\xe0[\\xa0-\\xbf][\\x80-\\xbf]|
[\\xe1-\\xec][\\x80-\\xbf]{2}|
\\xed[\\x80-\\x9f][\\x80-\\xbf]|
\\xef[\\x80-\\xbf][\\x80-\\xbc]|
\\xee[\\x80-\\xbf]{2}|
\\xf0[\\x90-\\xbf][\\x80-\\xbf]{2}|
[\\xf1-\\xf3][\\x80-\\xbf]{3}|
\\xf4[\\x80-\\x8f][\\x80-\\xbf]{2})*$
(Again, concatenate to one single line to make it work)
[#44] j dot dittmer at portrix dot net [2005-09-20 05:30:06]
The regex in the last comment has some typos. This is a
syntactically valid one, don't know if it's correct though.
You've to concat the expression in one long line.
^(
[\x00-\x7f]|
[\xc2-\xdf][\x80-\xbf]|
[\xe0][\xa0-\xbf][\x80-\xbf]|
[\xe1-\xec][\x80-\xbf]{2}|
[\xed][\x80-\x9f][\x80-\xbf]|
[\xee-\xef][\x80-\xbf]{2}|
[\xf0][\x90-\xbf][\x80-\xbf]{2}|
[\xf1-\xf3][\x80-\xbf]{3}|
[\xf4][\x80-\x8f][\x80-\xbf]{2}
)*$
[#45] chris at mrwsp dot com [2005-08-09 03:54:01]
A small improvement.
JF Sebastian's regex for UTF-8 is not quite correct. Because code points could otherwise be coded in more than one way using UTF-8, the Standard stipulates that the shortest possible representation for a character should be used. So some 'duplicate' combinations his regex accepts are not valid UTF-8. Additionally, his regex accepts characters beyond the valid Unicode code space.
The regex should be:
^([\x00-\x7f]|
[\xc2-\xdf][\x80-\xbf]|
[\xe0][\xa0-\xbf][\x80-xbf]|
[\xe1-\xec][\x80-\xbf]{2}|
[\xed][\x80-\x9f][\x80-\xbf]|
[\xee-\xef][\x80-\xbf]{2}|
[\xf0][\x90-\xbf][\x80-\xbf]{2}|
[\xf1-\xf3][\x80-\xbf]{3}|
[\xf4][\x80-\x8f][\x80-\xbf]{2}*$)
[#46] miracle at balkansys dot com [2005-06-14 02:24:24]
The best multilanguage library I have found is a part of a CMS system - typo3
http://www.typo3.org
It can convert from and to any charset + it does it by three methods - mbstring, iconv, or the raw way by scripts. It uses only one of these techniques - the fastest if available.
That was the only way I could make mysql 3.23 contain letters in almost any language, while maintaining my website in utf-8 only.
[#47] Vladimir Stwora, vlad4321 at fastmail dot fm [2005-05-08 15:41:33]
If you want to convert utf-8 to ascii, you can use the following procedure:
<?php
function utf2ascii($string) {
$string=iconv('utf-8','windows-1250',$string);
$win ='??????...'; // I was unable to paste here all set of characters, but you get the point
$ascii='zyaieuu...';
$string = StrTr($string,$win,$ascii);
return $string;
}
?>
This works based on the assumption that you know what language text (and thus what charset) you want to convert from. In the above example I am converting from an eastern European language, so I know I can safely use windows-1250 charset as an intermediem charset. You will have to adjust the charset based on your language.
Please remember that you have to save this file separately and it must be coded in the charset, which you will call within function iconv. Otherwise it will not work.
[#48] JF Sebastian [2005-03-30 07:09:01]
The following Perl regular expression tests if a string is well-formed Unicode UTF-8 (Broken up after each | since long lines are not permitted here. Please join as a single line, no spaces, before use.):
^([\x00-\x7f]|
[\xc2-\xdf][\x80-\xbf]|
\xe0[\xa0-\xbf][\x80-\xbf]|
[\xe1-\xec][\x80-\xbf]{2}|
\xed[\x80-\x9f][\x80-\xbf]|
[\xee-\xef][\x80-\xbf]{2}|
f0[\x90-\xbf][\x80-\xbf]{2}|
[\xf1-\xf3][\x80-\xbf]{3}|
\xf4[\x80-\x8f][\x80-\xbf]{2})*$
NOTE: This strictly follows the Unicode standard 4.0, as described in chapter 3.9, table 3-6, "Well-formed UTF-8 byte sequences" ( http://www.unicode.org/versions/Unicode4.0.0/ch03.pdf#G31703 ).
ISO-10646, a super-set of Unicode, uses UTF-8 (there called "UCS", see http://www.unicode.org/faq/utf_bom.html#1 ) in a relaxed variant that supports a 31-bit space encoded into up to six bytes instead of Unicode's 21 bits in up to four bytes. To check for ISO-10646 UTF-8, use the following Perl regular expression (again, broken up, see above):
^([\x00-\x7f]|
[\xc0-\xdf][\x80-\xbf]|
[\xe0-\xef][\x80-\xbf]{2}|
[\xf0-\xf7][\x80-\xbf]{3}|
[\xf8-\xfb][\x80-\xbf]{4}|
[\xfc-\xfd][\x80-\xbf]{5})*$
The following function may be used with above expressions for a quick UTF-8 test, e.g. to distinguish ISO-8859-1-data from UTF-8-data if submitted from a <form accept-charset="utf-8,iso-8859-1" method=..>.
function is_utf8($string) {
return (preg_match('/[insert regular expression here]/', $string) === 1);
}
[#49] ivanmaz(remove) at mech dot math dot msu dot su [2005-03-15 15:50:39]
[#50] marcelo at maccoy dot com dot br [2005-02-14 10:24:43]
function decode_utf8($str){
# erase null signs in string
$str=eregi_replace("^.{10,13}q\?","",$str);
# paterns
$pat = "/=([0-9A-F]{2})/";
$cha="'.chr(hexdec(";
# to decode with eval and replace
eval("\$str='".
preg_replace($pat,$cha."'$1')).'",$str).
"';");
# return
return $str;
}
Note:
It's possible put it in 3 lines, but I don't got in this first code submition.
[#51] husamb at maksimum dot net [2005-01-27 01:16:26]
Hi, I collected the some scripts in this page and I written a new customizable script. You can switch easily iso type to convert. There are definitions in unicode.org page at http://www.unicode.org/Public/MAPPINGS/ISO8859/.
<?php
# GLOBAL VARIABLES
$url = "http://www.unicode.org/Public/MAPPINGS/ISO8859/8859-9.TXT";
//$url = "8859-9.txt";
$iso2utf = array();
$utf2iso = array();
# UNICODE MAPPING TABLE PARSING
function create_map($url){
global $iso2utf, $utf2iso;
$fl = @(file($url)) OR (die("cannot open file : $url\n"));
for ($i=0; $i<count($fl); $i++){
if($fl[$i][0] != '#' && trim($fl[$i])){
list($iso, $uni, $s, $desc) = split("\t",$fl[$i]);
$iso2utf[$iso] = $uni;
$utf2iso[$uni] = $iso;
}
}
}
# FINDING UNICODE LETTER'S DECIMAL ASCII VALUE
function uniord($c){
$ud = 0;
if (ord($c{0})>=0 && ord($c{0})<=127) $ud = $c{0};
if (ord($c{0})>=192 && ord($c{0})<=223) $ud = (ord($c{0})-192)*64 + (ord($c{1})-128);
if (ord($c{0})>=224 && ord($c{0})<=239) $ud = (ord($c{0})-224)*4096 + (ord($c{1})-128)*64 + (ord($c{2})-128);
if (ord($c{0})>=240 && ord($c{0})<=247) $ud = (ord($c{0})-240)*262144 + (ord($c{1})-128)*4096 + (ord($c{2})-128)*64 + (ord($c{3})-128);
if (ord($c{0})>=248 && ord($c{0})<=251) $ud = (ord($c{0})-248)*16777216 + (ord($c{1})-128)*262144 + (ord($c{2})-128)*4096 + (ord($c{3})-128)*64 + (ord($c{4})-128);
if (ord($c{0})>=252 && ord($c{0})<=253) $ud = (ord($c{0})-252)*1073741824 + (ord($c{1})-128)*16777216 + (ord($c{2})-128)*262144 + (ord($c{3})-128)*4096 + (ord($c{4})-128)*64 + (ord($c{5})-128);
if (ord($c{0})>=254 && ord($c{0})<=255) $ud = false; //error
return $ud;
}
# PARSING UNICODE STRING
function utf2iso($source) {
global $utf2iso;
$pos = 0;
$len = strlen ($source);
$encodedString = '';
while ($pos < $len) {
$is_ascii = false;
$asciiPos = ord (substr ($source, $pos, 1));
if(($asciiPos >= 240) && ($asciiPos <= 255)) {
// 4 chars representing one unicode character
$thisLetter = substr ($source, $pos, 4);
$thisLetterOrd = uniord($thisLetter);
$pos += 4;
}
else if(($asciiPos >= 224) && ($asciiPos <= 239)) {
// 3 chars representing one unicode character
$thisLetter = substr ($source, $pos, 3);
$thisLetterOrd = uniord($thisLetter);
$pos += 3;
}
else if(($asciiPos >= 192) && ($asciiPos <= 223)) {
// 2 chars representing one unicode character
$thisLetter = substr ($source, $pos, 2);
$thisLetterOrd = uniord($thisLetter);
$pos += 2;
}
else{
// 1 char (lower ascii)
$thisLetter = substr ($source, $pos, 1);
$thisLetterOrd = uniord($thisLetter);
$pos += 1;
$encodedString .= $thisLetterOrd;
$is_ascii = true;
}
if(!$is_ascii){
$hex = sprintf("%X", $thisLetterOrd);
if(strlen($hex)<4) for($t=strlen($hex);$t<4;$t++)$hex = "0".$hex;
$hex = "0x".$hex;
$hex = $utf2iso[$hex];
$hex = str_replace('0x','',$hex);
$dec = hexdec($hex);
$encodedString .= sprintf("%c", $dec);
}
}
return $encodedString;
}
# CREATING ISO2UTF & UTF2ISO MAPS
create_map($url);
# TESTING
$unicode_string = "Ekonomi_ve_\xc4\xb0\xc5\x9f_D\xc3\xbcnyas\xc4\xb1";
echo "unicode string : <b>" . $unicode_string . "</b>";
echo "<br><br>";
echo "ISO8859 (latin5 / turkish) converted string : <b>" . utf2iso($unicode_string) . "</b>";
?>
The unicode string is turkish. ITs mean in english is 'Economy and Business World' :)
Husam
[#52] rasmus at flajm dot se [2005-01-19 02:57:40]
If you don't have the multibyte extension installed, here's a function to decode UTF-16 encoded strings. It support both BOM-less and BOM'ed strings, (big- and little-endian byte order.)
<?php
function utf16_decode( $str ) {
if( strlen($str) < 2 ) return $str;
$bom_be = true;
$c0 = ord($str{0});
$c1 = ord($str{1});
if( $c0 == 0xfe && $c1 == 0xff ) { $str = substr($str,2); }
elseif( $c0 == 0xff && $c1 == 0xfe ) { $str = substr($str,2); $bom_be = false; }
$len = strlen($str);
$newstr = '';
for($i=0;$i<$len;$i+=2) {
if( $bom_be ) { $val = ord($str{$i}) << 4; $val += ord($str{$i+1}); }
else { $val = ord($str{$i+1}) << 4; $val += ord($str{$i}); }
$newstr .= ($val == 0x228) ? "\n" : chr($val);
}
return $newstr;
}
?>
[#53] dobersch at gmx dot net [2004-11-04 06:11:50]
Sorry, there's an error in my previous comment, my error_reporting was not set to E_ALL ... so the notices disappeared...
It seems that those Google URLs are not only UTF-8 encoded, but after encoding, several values also get replaced. (cp1252 ?)
Just the way as described in following comments on the utf8_encode() page:
http://de3.php.net/manual/de/function.utf8-encode.php#44843 and
http://de3.php.net/manual/de/function.utf8-encode.php#45226
Below I post a solution for getting back the ISO-8859-1 encoded string from the encoded data, by turning the function from Aidan the other way around.
hope this time, everything is alright...
<?PHP
ini_set('error_reporting', E_ALL);
// map taken from http://de3.php.net/manual/de/function.utf8-encode.php#45226
$cp1252_map = array(
"\xc2\x80" => "\xe2\x82\xac",
"\xc2\x82" => "\xe2\x80\x9a",
"\xc2\x83" => "\xc6\x92",
"\xc2\x84" => "\xe2\x80\x9e",
"\xc2\x85" => "\xe2\x80\xa6",
"\xc2\x86" => "\xe2\x80\xa0",
"\xc2\x87" => "\xe2\x80\xa1",
"\xc2\x88" => "\xcb\x86",
"\xc2\x89" => "\xe2\x80\xb0",
"\xc2\x8a" => "\xc5\xa0",
"\xc2\x8b" => "\xe2\x80\xb9",
"\xc2\x8c" => "\xc5\x92",
"\xc2\x8e" => "\xc5\xbd",
"\xc2\x91" => "\xe2\x80\x98",
"\xc2\x92" => "\xe2\x80\x99",
"\xc2\x93" => "\xe2\x80\x9c",
"\xc2\x94" => "\xe2\x80\x9d",
"\xc2\x95" => "\xe2\x80\xa2",
"\xc2\x96" => "\xe2\x80\x93",
"\xc2\x97" => "\xe2\x80\x94",
"\xc2\x98" => "\xcb\x9c",
"\xc2\x99" => "\xe2\x84\xa2",
"\xc2\x9a" => "\xc5\xa1",
"\xc2\x9b" => "\xe2\x80\xba",
"\xc2\x9c" => "\xc5\x93",
"\xc2\x9e" => "\xc5\xbe",
"\xc2\x9f" => "\xc5\xb8"
);
// I find this name a little misleading because the result won't be valid UTF8 data
function cp1252_to_utf8($str) {
global $cp1252_map;
return strtr(utf8_encode($str), $cp1252_map);
}
function cp1252_utf8_to_iso($str) { // the other way around...
global $cp1252_map;
return utf8_decode( strtr($str, array_flip($cp1252_map)) );
}
$euro = "\xe2\x82\xac"; // "google encoded" euro sign
$str = cp1252_utf8_to_iso($euro);
for($i=0; $i<strlen($str); $i++) {
print '"' . $str[$i] . '" - ' . ord($str[$i]) . ' (decimal)<br />';
}
?>
[#54] vpribish at shopping dot com [2004-09-10 11:55:20]
big thanks to wielspm and mittag for the function to convert wide utf to html. I have altered your function to output decimal html entities which i hear are more widely supported. Also I've optimized it, it is now twice as fast.
<?php
function utf2html ($str) {
$ret = "";
$max = strlen($str);
$last = 0; // keeps the index of the last regular character
for ($i=0; $i<$max; $i++) {
$c = $str{$i};
$c1 = ord($c);
if ($c1>>5 == 6) { // 110x xxxx, 110 prefix for 2 bytes unicode
$ret .= substr($str, $last, $i-$last); // append all the regular characters we've passed
$c1 &= 31; // remove the 3 bit two bytes prefix
$c2 = ord($str{++$i}); // the next byte
$c2 &= 63; // remove the 2 bit trailing byte prefix
$c2 |= (($c1 & 3) << 6); // last 2 bits of c1 become first 2 of c2
$c1 >>= 2; // c1 shifts 2 to the right
$ret .= "&#" . ($c1 * 100 + $c2) . ";"; // this is the fastest string concatenation
$last = $i+1;
}
}
return $ret . substr($str, $last, $i); // append the last batch of regular characters
}
?>
[#55] Aidan Kehoe <php-manual at parhasard dot net> [2004-01-31 05:35:34]
The fastest way I've found to check if something is valid UTF-8 is
<?php .
if (iconv('UTF-8', 'UTF-8', $input) != $input) {
}
?>
The iconv() C library fails if it's told a string is UTF-8 and it isn't; the PHP one doesn't, it just returns the conversion up to the point of failure, so you have to compare the result to the input to find out if the conversion succeeded.
[#56] lg83news at free dot fr [2003-12-28 21:40:24]
Here are some functions for converting UTF-8 to and from Latin 9 (aka ISO-8859-15), if your PHP file is encoded as UTF-8.
<?php
function latin9_to_utf8($latin9str) { // replaces utf8_encode()
$trans = array("?"=>"?", "?"=>"?", "?"=>"?", "?"=>"?", "?"=>"?", "?"=>"?", "?"=>"?", "?"=>"?");
$wrong_utf8str = utf8_encode($latin9str);
$utf8str = strtr($wrong_utf8str, $trans);
return $utf8str;
}
function utf8_to_latin9($utf8str) { // replaces utf8_decode()
$trans = array("?"=>"?", "?"=>"?", "?"=>"?", "?"=>"?", "?"=>"?", "?"=>"?", "?"=>"?", "?"=>"?");
$wrong_utf8str = strtr($utf8str, $trans);
$latin9str = utf8_decode($wrong_utf8str);
return $latin9str;
}
?>
Note: the above functions will not work if your PHP file is not encoded in UTF-8.
You can copy this binary data to your PHP file instead, it'll work with any encoding (including UTF-8) as long as you copy it as bytes, not characters:
<?php
function latin9_to_utf8($latin9str) { // replaces utf8_encode()
$trans = array("??"=>"?", "?"=>"? ", "??"=>"?", "?"=>"?", "?"=>"?", "?"=>"?", "?"=>"?", "?"=>"?");
$wrong_utf8str = utf8_encode($latin9str);
$utf8str = strtr($wrong_utf8str, $trans);
return $utf8str;
}
function utf8_to_latin9($utf8str) { // replaces utf8_decode()
$trans = array("?"=>"??", "? "=>"?", "?"=>"??", "?"=>"?", "?"=>"?", "?"=>"?", "?"=>"?", "?"=>"?");
$wrong_utf8str = strtr($utf8str, $trans);
$latin9str = utf8_decode($wrong_utf8str);
return $latin9str;
}
?>
(Note: the PHP manual is served as ISO-8859-1, but many of the bytes used here have no meaning in ISO-8859-1, so they'll probably be displayed as Windows-1252 if your using Windows, or garbage otherwise. Just copy the bytes!)
[#57] gto at interia dot pl [2003-11-25 07:12:36]
[#58] nospam at jra dot nu [2003-11-23 03:48:23]
There is an error in the 'smart_utf8_decode' function posted by ' goran_johansson' below. It should look like this:
function smart_utf8_decode($in_str)
{
// Replace ? with a unique string
$new_str = str_replace("?", "q0u0e0s0t0i0o0n", $in_str);
// Try the utf8_decode
$new_str=utf8_decode($new_str);
// if it contains ? marks
if (strpos($new_str,"?") !== false)
{
// Something went wrong, set new_str to the original string.
$new_str=$in_str;
}
else
{
// If not then all is well, put the ?-marks back where is belongs
$new_str = str_replace("q0u0e0s0t0i0o0n", "?", $new_str);
}
return $new_str;
}
[#59] janusz dot s at remove_this dot and_this dot poczta dot fm [2003-10-25 08:54:24]
[#60] bn2 (bn2 at ukr dot net) [2003-09-01 08:56:09]
Function to decode uft8 to win-1251 (russian) charset. Don't support ukrainian letters. Support only 2-byte coding.
function utf8win1251($s){
$out="";$c1="";$byte2=false;
for ($c=0;$c<strlen($s);$c++){
$i=ord($s[$c]);
if ($i<=127) $out.=$s[$c];
if ($byte2){
$new_c2=($c1&3)*64+($i&63);
$new_c1=($c1>>2)&5;
$new_i=$new_c1*256+$new_c2;
if ($new_i==1025) $out_i=168; else
if ($new_i==1105) $out_i=184; else $out_i=$new_i-848;
$out.=chr($out_i);
$byte2=false;}
if (($i>>5)==6) {$c1=$i;$byte2=true;}
}
return $out;}
[#61] morris_hirsch at hotmail dot com [2003-08-18 09:43:50]
Be aware that utf8_decode can not properly store ''wide'' code entities which have a numeric value too big for a byte.
This function may help you. It converts utf8 to strict ASCII with no high-bit codes, they are all written as numerics.
// UTF-8 encoding
// bytes bits representation
// 1 7 0bbbbbbb
// 2 11 110bbbbb 10bbbbbb
// 3 16 1110bbbb 10bbbbbb 10bbbbbb
// 4 21 11110bbb 10bbbbbb 10bbbbbb 10bbbbbb
// Each b represents a bit that can be used to store character data.
// input CANNOT have single byte upper half extended ascii codes
function numeric_entify_utf8 ($utf8_string) {
$out = "";
$ns = strlen ($utf8_string);
for ($nn = 0; $nn < $ns; $nn++) {
$ch = $utf8_string [$nn];
$ii = ord ($ch);
//1 7 0bbbbbbb (127)
if ($ii < 128) $out .= $ch;
//2 11 110bbbbb 10bbbbbb (2047)
else if ($ii >>5 == 6) {
$b1 = ($ii & 31);
$nn++;
$ch = $utf8_string [$nn];
$ii = ord ($ch);
$b2 = ($ii & 63);
$ii = ($b1 * 64) + $b2;
$ent = sprintf ("&#%d;", $ii);
$out .= $ent;
}
//3 16 1110bbbb 10bbbbbb 10bbbbbb
else if ($ii >>4 == 14) {
$b1 = ($ii & 31);
$nn++;
$ch = $utf8_string [$nn];
$ii = ord ($ch);
$b2 = ($ii & 63);
$nn++;
$ch = $utf8_string [$nn];
$ii = ord ($ch);
$b3 = ($ii & 63);
$ii = ((($b1 * 64) + $b2) * 64) + $b3;
$ent = sprintf ("&#%d;", $ii);
$out .= $ent;
}
//4 21 11110bbb 10bbbbbb 10bbbbbb 10bbbbbb
else if ($ii >>3 == 30) {
$b1 = ($ii & 31);
$nn++;
$ch = $utf8_string [$nn];
$ii = ord ($ch);
$b2 = ($ii & 63);
$nn++;
$ch = $utf8_string [$nn];
$ii = ord ($ch);
$b3 = ($ii & 63);
$nn++;
$ch = $utf8_string [$nn];
$ii = ord ($ch);
$b4 = ($ii & 63);
$ii = ((((($b1 * 64) + $b2) * 64) + $b3) * 64) + $b4;
$ent = sprintf ("&#%d;", $ii);
$out .= $ent;
}
}
return $out;
}
[#62] johan dot andersson at strateg dot se [2003-05-05 01:25:46]
A simple way to convert utf-8 encoded strings...
(PHP 4 >= 4.3.0)
<?php
$newstring = html_entity_decode(htmlentities($utf8_string, ENT_COMPAT, 'UTF-8'));
?>
(For 4.1.0 >= PHP < 4.3.0 use this function instead of html_entity_decode)
<?php
function unhtmlentities ($string)
{
$trans_tbl = get_html_translation_table (HTML_ENTITIES);
$trans_tbl = array_flip ($trans_tbl);
return strtr ($string, $trans_tbl);
}
$newstring = unhtmlentities(htmlentities($utf8_string, ENT_COMPAT, 'UTF-8'));
?>
//Johan
[#63] [2003-02-24 06:10:15]
Oups, this is the non bugged version :)
Well sometimes you need to store a utf-8 string in a database table column with a fixed size.
Here is a function that fix a string which has been broken (by a substr for example) in a middle of a utf-8 char sequence.
function FixUtf8BrokenString($Desc)
{
// UTF-8 encoding
// bytes : representation
// 1 : 0bbbbbbb
// 2 : 110bbbbb 10bbbbbb
// 3 : 1110bbbb 10bbbbbb 10bbbbbb
// 4 : 11110bbb 10bbbbbb 10bbbbbb 10bbbbbb
// to see if a string is broken in middle of a utf8 char
// we search for last byte encoding size of utf-8 char
// if number of last bytes in string is lower than encoding size
// we remove those last bytes
// if last byte is ord < 128, ok. we return !
if (ord($Desc[strlen($Desc) - 1]) < (0x80))
return $Desc
// loop for finding byte encoding size
$nbbytes = 1;
while (ord($Desc[strlen($Desc) - $nbbytes]) > 0x7F)
{
if (ord($Desc[strlen($Desc) - $nbbytes]) > 0xBF)
break;
$nbbytes++;
}
// check if byte encoding size is encoding a size of 4 bytes
if ((ord($Desc[strlen($Desc) - $nbbytes]) > 0xF0) && ($nbbytes == 4))
return $Desc;
// check if byte encoding size is encoding a size of 3 bytes
if ((ord($Desc[strlen($Desc) - $nbbytes]) > 0xE0) && ($nbbytes == 3))
return $Desc;
// check if byte encoding size is encoding a size of 2 bytes
if ((ord($Desc[strlen($Desc) - $nbbytes]) > 0xC0) && ($nbbytes == 2))
return $Desc;
// then this is the case where string is badly broken, we remove last bytes
return substr($Desc, 0, -$nbbytes);
}
$str = "Ekonomi_ve_\xc4\xb0\xc5\x9f_D\xc3\xbcnyas\xc4\xb1";
$broken = substr($str, 0, 12);
$fixed = FixUtf8BrokenString($broken);
echo "$str<hr>$fixed<hr>$broken<hr>";
Sebastien Meudec.
[#64] [2002-12-18 09:08:16]
addition to above entrie:
it does not mean "when it comes to a '='" but when it comes to a "0"
[#65] mittag - -add- -marcmittag- -dot- -de [2002-12-18 08:56:01]
The above function does not work entirely correct. It comes to problems, if there is a leading "=" in one of the two Strings it produces and glues out of the two bytes of the unicode letter.
The following works:
<?php
//Convert Unicode to ASCII + Entities
$fp = fopen($DOCUMENT_ROOT."/your_unicode_text.txt", "r");
while ( !feof($fp) )
{ $string = fgets($fp, 1000);
$utf2html_string .= $string;
}
$string2 = $utf2html_string;
fclose ( $fp);
function utf2html ()
{
global $utf2html_string;
$utf2html_retstr = "";
for ($utf2html_p=0; $utf2html_p<strlen($utf2html_string); $utf2html_p++) {
$utf2html_c = substr ($utf2html_string, $utf2html_p, 1);
$utf2html_c1 = ord ($utf2html_c);
if ($utf2html_c1>>5 == 6) {// 110x xxxx, 110 prefix for 2 bytes unicode
$utf2html_p++;
$utf2html_t = substr ($utf2html_string, $utf2html_p, 1);
$utf2html_c2 = ord ($utf2html_t);
$utf2html_c1 &= 31; // remove the 3 bit two bytes prefix
$utf2html_c2 &= 63; // remove the 2 bit trailing byte prefix
$utf2html_c2 |= (($utf2html_c1 & 3) << 6); // last 2 bits of c1 become first 2 of c2
$utf2html_c1 >>= 2; // c1 shifts 2 to the right
$a = dechex($utf2html_c1);
$a = str_pad($a, 2, "0", STR_PAD_LEFT);
$b = dechex($utf2html_c2);
$b = str_pad($b, 2, "0", STR_PAD_LEFT);
$utf2html_n_neu = $a.$b;
$utf2html_n_neu_speicher = $utf2html_n_neu;
$utf2html_n_neu = "&#x".$utf2html_n_neu.";";
$utf2html_retstr .= $utf2html_n_neu;
}
else {
$utf2html_retstr .= $utf2html_c;
}
}
echo $utf2html_retstr;
//return $utf2html_retstr;
}
utf2html();
?>
[#66] wielspm at xs4all dot nl [2002-12-05 09:44:52]
Here is a function I made to convert all 2 byte utf in a &#xxx; form:
function utf2html ($utf2html_string)
{
$utf2html_retstr = "";
for ($utf2html_p=0; $utf2html_p<strlen($utf2html_string); $utf2html_p++):
$utf2html_c = substr ($utf2html_string, $utf2html_p, 1);
$utf2html_c1 = ord ($utf2html_c);
if ($utf2html_c1>>5 == 6): // 110x xxxx, 110 prefix for 2 bytes unicode
$utf2html_p++;
$utf2html_t = substr ($utf2html_string, $utf2html_p, 1);
$utf2html_c2 = ord ($utf2html_t);
$utf2html_c1 &= 31; // remove the 3 bit two bytes prefix
$utf2html_c2 &= 63; // remove the 2 bit trailing byte prefix
$utf2html_c2 |= (($utf2html_c1 & 3) << 6); // last 2 bits of c1 become first 2 of c2
$utf2html_c1 >>= 2; // c1 shifts 2 to the right
$utf2html_n = dechex($utf2html_c1).dechex($utf2html_c2);
$utf2html_retstr .= sprintf ("&#%03d;", hexdec($utf2html_n));
else:
$utf2html_retstr .= $utf2html_c;
endif;
endfor;
return $utf2html_retstr;
}
[#67] ronen at greyzone dot com [2002-03-01 17:37:45]
The following function will take a utf-8 encoded string and convert it to Unicode entities (the format is &#nnn; or &#nnnnn; with n={0..9} ). Most browsers will display Unicode entities regardless of the encoding of the page. Otherwise try charset=utf-8 to make sure the entities display correctly. This works well with IE and Mozilla (tested with Mozilla 0.9.8 for X-Windos).
<?php
function utf8ToUnicodeEntities ($source) {
// array used to figure what number to decrement from character order value
// according to number of characters used to map unicode to ascii by utf-8
$decrement[4] = 240;
$decrement[3] = 224;
$decrement[2] = 192;
$decrement[1] = 0;
// the number of bits to shift each charNum by
$shift[1][0] = 0;
$shift[2][0] = 6;
$shift[2][1] = 0;
$shift[3][0] = 12;
$shift[3][1] = 6;
$shift[3][2] = 0;
$shift[4][0] = 18;
$shift[4][1] = 12;
$shift[4][2] = 6;
$shift[4][3] = 0;
$pos = 0;
$len = strlen ($source);
$encodedString = '';
while ($pos < $len) {
$asciiPos = ord (substr ($source, $pos, 1));
if (($asciiPos >= 240) && ($asciiPos <= 255)) {
// 4 chars representing one unicode character
$thisLetter = substr ($source, $pos, 4);
$pos += 4;
}
else if (($asciiPos >= 224) && ($asciiPos <= 239)) {
// 3 chars representing one unicode character
$thisLetter = substr ($source, $pos, 3);
$pos += 3;
}
else if (($asciiPos >= 192) && ($asciiPos <= 223)) {
// 2 chars representing one unicode character
$thisLetter = substr ($source, $pos, 2);
$pos += 2;
}
else {
// 1 char (lower ascii)
$thisLetter = substr ($source, $pos, 1);
$pos += 1;
}
// process the string representing the letter to a unicode entity
$thisLen = strlen ($thisLetter);
$thisPos = 0;
$decimalCode = 0;
while ($thisPos < $thisLen) {
$thisCharOrd = ord (substr ($thisLetter, $thisPos, 1));
if ($thisPos == 0) {
$charNum = intval ($thisCharOrd - $decrement[$thisLen]);
$decimalCode += ($charNum << $shift[$thisLen][$thisPos]);
}
else {
$charNum = intval ($thisCharOrd - 128);
$decimalCode += ($charNum << $shift[$thisLen][$thisPos]);
}
$thisPos++;
}
if ($thisLen == 1)
$encodedLetter = "&#". str_pad($decimalCode, 3, "0", STR_PAD_LEFT) . ';';
else
$encodedLetter = "&#". str_pad($decimalCode, 5, "0", STR_PAD_LEFT) . ';';
$encodedString .= $encodedLetter;
}
return $encodedString;
}
?>
Ronen.