©
本文档使用 PHP中文网手册 发布
In this section you will learn how to set-up NGINX with HHVM and MongoDB. However, this tutorial is not meant to be an all inclusive guide on how to run NGINX and HHVM in a production environment.
In this tutorial, we will be using a Debian system, with NGINX installed
through apt-get
and HHVM installed from
source into /usr/local/hhvm/3.9.1
(with the binary located at /usr/local/hhvm/3.9.1/bin/hhvm
).
We simply install NGINX by running apt-get install nginx-full
.
If NGINX fails to start after installation, it is likely that you already
have another web server (e.g. Apache) running on the same port. In that case,
you will see the following lines in /var/log/nginx/error.log
:
2015/09/29 10:19:27 [emerg] 22445#22445: bind() to 0.0.0.0:80 failed (98:Address already in use) 2015/09/29 10:19:27 [emerg] 22445#22445: bind() to [::]:80 failed (98: Address already in use)
To resolve this, you can either change the default port for NGINX or Apache,
stop the Apache process with service apache2 stop
, or remove
Apache entirely with apt-get remove apache2
.
This tutorial is written from the perspective of an extension developer, so we've installed HHVM from source to faciliate patch development and ensure that debug symbols are available. That said, the folks at Facebook also provide pre-built packages, which is probably what you to use in production and development. You can find installation instructions for these packages on the » HHVM Wiki.
You will need to install both the the hhvm
and hhvm-dev
packages. The latter is needed
so that we can compile the MongoDB HHVM extension later on.
If you are compiling HHVM from source, you will need to create
/var/run/hhvm
:
sudo mkdir -p /var/run/hhvm sudo chown www-data.www-data /var/run/hhvm sudo mkdir /etc/hhvm sudo touch /etc/hhvm/php.ini # So that you don't have to ``sudo`` to edit the file sudo chown derick /etc/hhvm/php.ini # To see whether it actually works echo "date.timezone=Europe/London" >> /etc/hhvm/php.ini
HHVM should be started as the www-data
user. For the purposes of
this tutorial, we can run it in the foreground in server
mode as follows:
sudo -u www-data -s /usr/local/hhvm/3.9.1/bin/hhvm \ --mode server \ -vServer.Type=fastcgi \ -vServer.FileSocket=/var/run/hhvm/sock
Once HHVM runs, we need to tell NGINX how to talk to HHVM for executing
.php
files. Although this is perhaps not the cleanest approach,
you can add the following snippet to
/etc/nginx/sites-enabled/default
, just after the
location / { … }
section:
location ~ \.php$ { fastcgi_pass unix:/var/run/hhvm/sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; }
After adding that snippet, you should restart NGINX:
sudo service nginx restart
To confirm that everything works so far, we will create a project directory
with an index.php
file that calls phpinfo()
:
Create the project directory:
sudo mkdir -p /var/www/html/my-first-project
Change permissions to your user and the www-data
group:
sudo chown derick.www-data /var/www/html/my-first-project
Create the file /var/www/html/my-first-project/index.php
.
From now on, I will not include the full path
/var/www/html/my-first-project/
when I mention file names.
Put the following content in this file:
<?php
phpinfo ();
?>
Now, in your browser, request the page
http://gargleblaster/my-first-project/index.php
(but adjust the
hostname). This should then show a page starting with "HHVM Version 3.9.1"
followed by several tables with information.
The MongoDB driver is the part that links up the PHP in HHVM with the database server. To install and register the driver with HHVM, you need to take the following steps:
Download the latest driver from » GitHub (at the time of this writing, HHVM does not have a package manager for extensions). In the examples below, we will use "x.y.z" as a version placeholder.
Unpack the archive: tar -xvzf hhvm-mongodb-x.y.z.tgz
Change to the newly created directory: cd hhvm-mongodb-x.y.z
Generate the configure
files for the bundled libraries. For
this to work, you need to have the automake
,
autoconf
, and libtool
packages installed
(through apt-get
).
cd libbson; ./autogen.sh; cd .. cd libmongoc; ./autogen.sh; cd ..
Generate the Makefile: hphpize && cmake .
Build the driver: make -j 5
Install the driver: sudo make install
. This last step will
report where the binary file mongodb.so
has been installed.
It should show somthing similar to: Installing:
/usr/local/hhvm/3.9.1/lib/hhvm/extensions/20150212/mongodb.so
Now that the driver is installed, you need to enable it in HHVM. Add the
following lines to /etc/hhvm/php.ini
, swapping out the directory
in this example for the path shown after running make install
:
hhvm.dynamic_extension_path=/usr/local/hhvm/3.9.1/lib/hhvm/extensions/20150212 hhvm.dynamic_extensions[mongodb]=mongodb.so
After you have done this, HHVM will need to be restarted. If you have HHVM running in the shell from earlier, stop it with Ctrl-C and restart it again as above:
sudo -u www-data -s /usr/local/hhvm/3.9.1/bin/hhvm \ --mode server \ -vServer.Type=fastcgi \ -vServer.FileSocket=/var/run/hhvm/sock
In order to test that the driver is loaded, edit the index.php
file and replace its contents with:
<?php
var_dump ( phpversion ( "mongodb" ));
?>
This should output something similar to:
string(5) "x.y.z"
Continue this tutorial by jumping to Using the library